Total 5,685 Maintenance / Repair job vacancies

Key Responsibilities:
• Sweep, mop, vacuum, and polish floors.
• Clean desks, furniture, glass surfaces, and office equipment.
• Empty and dispose of trash bins properly.
• Sanitize toilets, pantries, and meeting rooms.
• Refill toiletries and cleaning supplies as needed.
• Report any maintenance or safety issues to the supervisor.
• Follow all health and safety regulations and company procedures

Requirements:
• Previous experience as a cleaner preferred.
• Ability to work independently with minimal supervision.
• Good attention to detail and time management.
• Physically fit to handle cleaning tasks.
• Willing to work flexible hours if required

Location:
Town Area

Brief Job Description

• Carry out routine maintenance and repair works, electrical, plumbing, plastering, and painting works
• Order, receive and check goods and supplies for maintenance and store them in correct storage areas
• Assist gardening staff with clearing of excessive plant litter and leaves during inclement weather
• Prevent water from accumulating near the building, look for any signs of gutter or downspout problems. Check to ensure there is no potential mosquito breeding. Clear gutters and drains of blockage.
• Ensure that all external and internal light fixtures are in working condition
• Handle general duties such as set up of rooms, moving of furniture from classroom to classroom or EtonHouse branches
• Assist in setting up of rooms for school events, graduation ceremony, festive functions when required;
• In the absences of Cleaners, you are required to assist with indoor cleaning of the classrooms
• Any other duties as and when assigned

Job Description:

• Investigate, troubleshoot and resolve IT-related issues involving operating systems, software, hardware, networks, printers and scanners.
• Assist in the setup, configuration, maintenance, and troubleshooting of office IT infrastructure including LAN, internet connectivity, routers, switches, wireless access points and NAS system.
• Install, configure, and maintain end-user equipment such as desktops, laptops, monitors and peripherals.
• Assist HR with IT onboarding and offboarding, including granting system access, conducting induction for new hires, and preparing devices.
• Ensure IT security and data privacy practices are followed, including antivirus updates, access controls, and basic security checks.
• Liaise with external IT vendors and service providers for issue escalation, maintenance, and IT-related projects.
• Maintain accurate IT asset tracking, including hardware inventory, software licenses, and equipment lifecycle records.
• Document IT procedures, system configurations, troubleshooting steps, and infrastructure changes.
• Assist the team with ad-hoc IT tasks, projects, and improvements as required.

Job requirements:

• Min Diploma or equivalent qualification in Information Technology, Computer Science, related field.
• Min 2 years of relevant experience preferred.
• Proficient in Microsoft Office applications and Windows operating systems.
• Basic understanding of TCP/IP, LAN technology, DNS, DHCP and network fundamentals.
• Hands-on experience or working knowledge of Synology NAS administration, including backup configuration and access management.
• Knowledge of Internet security and data privacy principles.
• Familiarity with hardware troubleshooting, cabling, and basic network devices is an advantage.
• Strong problem-solving, communication, and time-management skills.
• Proactive team player with the ability to work independently with minimal supervision
• 5 day work week

Position title : Driver cum Technician (Class 3 driving license) 

Location: Islandwide (Office: Sin Ming Lane) [Brighthill MRT]
Working Days: 5.5 days, Monday - Saturday(half day)
Working hours :  8.30am-5.30pm | 8.30am to 12.30pm 
Salary: Basic $2500 + ($100-$200) allowance + OT (roughly $500) 

Job scope: 

• Use company van to fetch working buddy, and drive to client's place. 
• Use machine to service / clear kitchen/ toilet drainage pipe 

Requirements: 

• Class 3 driving license is a must 
• Van can drive home 
• Training provided 

If you are keen to apply, please send me your resume and job applied for on WhatsApp at 9789 3505 or email me at anabel.thesupreme@gmail.com (˶ᵔ ᵕ ᵔ˶)

❄️Anabel Boon Xue Qi | Recruitment Consultant (R25159272) |

Join the Singapore Civil Defence Force (SCDF) - The Life-Saving Force
We are a team of elite emergency response professionals from the Fire and Rescue Service (FRS) and the Emergency Medical Service (EMS), that are dedicated to saving lives and protecting property. Join us to be part of a family that strives to safeguard and make a difference in the lives of our citizens, in both peacetime and emergency.

Lifesaving. It's Life Changing!

What the role is
The 3-Year Emergency Medical Technician (EMT) contract position with the Singapore Civil Defence Force (SCDF) presents an exceptional opportunity for individuals seeking to gain invaluable medical experience as part of the esteemed Life Saving Force. This role offers an exclusive pathway for passionate individuals to immerse themselves in frontline emergency response scenarios.

Applicants who hold a valid Class 3 Driving License, coupled with academic credentials such as ‘N’-Levels, 'O' Levels, NITEC, Higher NITEC, or Diploma qualifications, and aspire to contribute to the Lifesaving Force upon graduation, will find the 3-Year EMT position to be an attractive proposition. This career trajectory allows individuals to concurrently engage in meaningful work, earn a competitive salary, and delve into the realm of life-saving endeavours.

Upon joining the SCDF, officers can expect to secure stable full-time employment accompanied by a compelling remuneration package. They can also stand to earn between $2,940 to $4,370, inclusive of additional monthly frontline allowances.

What we are looking for
The eligibility criteria for the 3-Year EMT Contract role include:

• Possesses Class 3/3A Driving License with more than 1-year validity, as successful applicants will be required to drive an ambulance that requires either a Class 3 or 3A license
• GCE 'N' Level and above
• Applicants with NS obligations must be medically classified as PES C2 or above
• For Pre-enlistees, there will be a 5-year Minimum Term of Engagement (MTE) bond in lieu of the National Service’s obligation.

As valued members of SCDF, employees stand to benefit from a range of perks and privileges, including:

• Competitive salary range, inclusive of frontline / shift allowance
• Annual increments
• Performance bonuses
• 14 to 18 Days of Vacation Leave (inclusive of other leave types)
• Medical and Dental Subsidies
• Yearly $700 learning and development subsidies to better support MHA’s officers’ professional and personal growth, health and well-being.
• Employee Welfare Benefits
• Group Insurance Coverage
• Vocational Section Commander Certification
• Emergency Medical Technician Certification
• Emergency Vehicle Ambulance Driving Certification

Sign On Bonus
Successful applicants will receive a $6,000 sign-on bonus (subject to eligibility), with officers also having the chance to secure full-time employment and an additional $24,000 sign-on bonus (subject to eligibility) upon emplacement as a Fire and Rescue Specialist or Paramedic Specialist.

Embracing this role not only offers professional growth opportunities but also enables individuals to make a tangible difference in emergency medical care provision. Join us in safeguarding lives and property, while embarking on a fulfilling career journey with SCDF.

What you will be working on
Officers enrolled in this course will join the Singapore Civil Defence Force (SCDF) as an Emergency Medical Technician-Driver, entrusted with the vital mission of preserving lives and property in diverse emergency scenarios while operating ambulances. Within this capacity, their duties entail swift response to medical incidents and other rescue operations, leveraging their training to deploy essential medical procedures and administer aid to individuals in distress.

Embracing a role within SCDF not only signifies a commitment to community service but also presents a profound opportunity to contribute significantly by safeguarding lives and property amid emergencies.

As a 3-Year EMT Contract Officer, individuals can anticipate a structured career trajectory that encompasses rigorous training in Vocational Section Commander and Emergency Medical Technical skills. Upon successful completion of these training modules, officers will be stationed at a designated fire station.

For more information, please visit the following links
SCDF EMT - 3 Year Contract - https://www.scdf.gov.sg/home/join-us/uniformed-positions/scdfemt

Responsibilities:

• Preparing tender/contract documents, working on quantities, taking off measurement, providing cost, estimates and managing cost information
• Prepare and call quotations, including analyzing and evaluating for costing of tender; or negotiate and award of subcontracts for project
• Assist in preparing cost budget, track changes in design/construction work and adjust budget projections accordingly
• Certify and evaluate progress work done, includes contract administration for variations for both subcontract and main contract works
• Preparation and submission of monthly valuations for progress claim
• Monitoring and follow-up on the payment response from client until receipt and submission of invoice to clients
• Assist in verifying subcontractor claims, settle contractual disputes and finalization of accounts
• Collaborate with project managers, engineers, and other stakeholders to ensure project success
• Provide advice on contractual matters
• Ensure meticulous assessment of costs for all VO works
• Monitoring and submission of monthly Cash Flow and analysis
• Mentor and supervise junior quantity surveyors

Requirements:

• Diploma or Degree in Building / Civil Engineering/Quantity Surveying or equivalent
• Minimum 5 years of relevant experience in construction sector
• Good Negotiating Skills
• Must be meticulous with positive work attitude
• Committed, analytical and able to meet tight scheduled duties assigned
• Independent and a good team player

Responsibilities:

• Prepare setting out plan and calculations
• Coordinate work progression and directions
• Verifies the accuracy of survey data, including measurements and calculations conducted at survey sites
• Conduct periodic and final check on completed works to ensure position, level and vertically are within allowance
• Manage and maintain survey instruments and survey data and records
• Liaise with client and contractors on survey matters
• Report to immediate superior regarding any discrepancies
• Maintains and store accurate notes, records, and drawing files for active projects
• Perform other duties as assigned

Requirements:

• Minimum Diploma in Land Surveying & Geomatics Technology, Diploma in Civil Engineering or related disciplines
• Minimum 5 years’ surveying work experience, preferably in civil engineering projects
• Familiar with local survey requirements and practices
• Proficiency in AutoCad and Microsoft Office applications are an added advantage

Job Description & Requirements

• Perform maintenance of marine electrical system/component in workshops and onboard vessels.
• Supervise a team of electricians in planned and corrective maintenance.
• Perform corrective maintenance and planned maintenance.
• Perform electrical wiring, cabling and modification of electrical circuit.
• Test electrical systems and continuity of circuits in electrical wiring, equipment and fixtures, using testing devices such as multimeter, insulation tester and process calibrator
• Participate in the repair of electrical components in workshop and onboard ships.
• Testing / calibration of high / low voltage equipment or fault analysis.
• Read electrical circuit drawings.
• Handle DC / AC motors, generators, switchboards and circuit breakers.
• Perform troubleshooting and fault rectification during daily operations.
• Perform work in outdoor condition e.g heat, oil and dust.

• Complete daily hands-on maintenance tasks and perform checks to ensure all tasks assigned by Engineers or Supervisors are completed according to the required services and safety standards adhering to procedures and requirements.
• Perform hands-on work in carrying out troubleshooting and rectification of mechanical or marine diesel defects through removal, service, installation and conduct system tightness test.
• Perform joint inspection and acceptance with ship representative and coordinate with ship crews to perform function test of ship systems.
• Carry out replenishment of submarines supplies such as topping up of gases, fuel oil, lubricating oil and hydraulic oil.
• Supervise and guide a team of junior technicians to carry out the planned and corrective maintenance onboard the Submarines.
• Perform logistical support such as lifting of equipment and components and maintenance of workshop tool and equipment.
• Adhere to strict safety protocols and procedures to ensure the safety of oneself and others onboard the submarine.
• Use torque wrench, pressure gauges, internal, external micrometer and vernier caliper.
• Use mechanical tools and equipment such as spanner, ratchet wrench, lever block and chain block (chain hoist).
• Read and depict technical documents such as 2D assembly drawing and schematic diagram.
• Perform hands on work and overtime during weekdays and weekends due to work exigencies.
• Perform demanding tasks in tight and confined spaces, shipyard and outdoor environment.
• Use Microsoft Word and Microsoft Excel.
• Internal and external training will be provided.
• Perform any other duties as assigned by the management.

We are seeking a detail-oriented, hands-on Dental Technician Trainee to join our laboratory team. In this entry-level role, you will learn the artistry and science behind fabricating dental prosthetics, including crowns, bridges, and orthodontic appliances.

You will work directly under the supervision of experienced Dental Technicians and Laboratory Managers, gaining practical, real-world experience while mastering the technical skills required for a successful career in dental technology. No prior experience is required—we provide full, step-by-step training.

Key Responsibilities

• Learn and Master Fabrication: Assist in and gradually take over the creation of dental models, custom trays, bite rims, and prosthetic frameworks.

• Plaster Room Operations: Mix, pour, and trim plaster and stone models from dental impressions provided by clinics.

• Digital & Traditional Articulation: Learn to articulate models correctly to simulate the patient's bite.

• Introduction to CAD/CAM: Assist with scanning models and utilizing digital dental software for 3D printing or milling prosthetics (where applicable).

• Finishing and Polishing: Learn the precise techniques for polishing, contouring, and finishing acrylic and metal dental appliances.

• Lab Maintenance: Maintain cleanliness and organization within the laboratory, ensuring tools and machinery are properly maintained.

• Quality Control: Follow strict prescription specifications from dentists and ensure all work meets infection control and quality standards.

Requirements & Qualifications

• Education: O' Levels and above

• Manual Dexterity: Exceptional hand-eye coordination and a steady hand for working with small, delicate components.

• Attention to Detail: Ability to spot minor imperfections and follow highly specific, customized prescriptions.

• Artistic Aptitude: A good eye for shape, color, symmetry, and form is highly beneficial.

• Tech-Savvy: Willingness to learn modern digital dentistry tools and software (CAD/CAM).

• Reliability & Attitude: Strong work ethic, patience, and a eagerness to accept constructive feedback during the learning process.
  

  Working hours
  Mon to Fri: 9-6pm
  Sat: 9-1pm
  

  Work Benefits
  -7days paid leave, thereafter additional of 1 day each year up to 14 days paid leave max

  -Year end Bonus (depending on performance)
  

  Location:
  Ubi, Nearest MRT - Taiseng MRT

As a Global Facilities Senior Program Manager, you will work closely with all the major functional organizations within Global Facilities, & with the world-wide site Facilities, FE Strategic Program (FE PMO) team and other major corporate organizations to drive systems projects/programs from initiation to completion. These projects/programs are critical to the success of Facilities and the overall network.

• Lead and orchestrate cross‑functional program and portfolio execution by partnering with Global and Site Facilities, PMO, IT, system owners, and developers to design, standardize, and deploy global reports, enterprise programs, and scalable business processes for a geographically distributed, multicultural organization.

• Establish and enforce PMO governance frameworks across projects, programs, and portfolios, including prioritization, intake, roadmap planning, dependency management, and change control—while continuously re‑aligning execution priorities to evolving business needs and strategic direction.

• Define, implement, and sustain enterprise performance management practices by partnering with metrics owners and systems teams to design, publish, and govern routine and ad‑hoc dashboards and reports that enable leadership visibility, data‑driven decision‑making, and portfolio health monitoring.

• Drive accountability and continuous improvement through structured communication, milestone tracking, risk and issue management, executive‑ready status reporting, and disciplined use of metrics to measure outcomes, identify gaps, and ensure delivery against commitments.

• Serve as the accountable owner for Global Facilities platforms and solutions (e.g., SharePoint, EDC, SQL servers, Microsoft Teams groups, web interfaces), ensuring disciplined system governance, lifecycle management, standardized operating models, and effective adoption through clear administrative controls and professional advisory support.

Qualifications

The successful candidate for this position will have:

• Excellent skills for leading or facilitating multi-organizational teams to success on complex multidimensional projects/programs

• Excellent communication skills to build teams comprised of key skills, to drive progress to plan and to get management support and buy-in for complex projects/programs

• Strong teammate to effectively collaborate with multi-functional organizations and proven track record, interpersonal, and customer service skill to comfortably work across boundaries and geographies.

• Professional, organized, meticulous, strong analytical, problem-solving, and facilitation skills. Able to independently complete tasks and adapt to constantly evolving environment.

• 5 or more years of Facilities Semiconductor industry engineering experience will be preferred

• Project/Program management experiences are preferable

• Skilled in the creation and management of projects/programs (Power BI, Tableau reports, SharePoint Online, etc) and Microsoft Office suite (Word, PowerPoint, Excel, Outlook, Project, Power Automate, PowerApps).

• Working knowledge and drive quality programs such as MOC, FMEA, Calibration, GDMS, Error-Proofing, etc

Education

• Bachelor’s degree in engineering or equivalent

Workplace

• Travel Required          : Yes – Domestic and International travel as required by business needs

• Environment               : Office

• Shift                            : Normal shift (8+ hour)
  

  Leads people who are responsible for internal business projects and programs involving department or cross-functional teams of subject matter experts, delivering products through the design process to completion. Plans and directs schedules as well as project budgets. Monitors the project from inception through delivery. May engage and oversee the work of external vendors. Assigns, directs and monitors system analysis and program staff. These positions' primary focus is project/program management, rather than the application of expertise in a specialized functional field of knowledge although they may have technical team members.

Location: Woodlands
Mon to Fri 8.30am to 5.30pm
Basic $2600 with AWS & Bonus
US MNC

Fresh/No experience most welcome!

Job Description

• Act as the primary coordinator for customer return parts, including repair, evaluation, and disposition.
• Receive, log, and track returned parts from customers for repair service or investigation.
• Coordinate with internal teams (QA, Engineering, Production, Repair Service) to ensure timely repair, rework, or analysis.
• Communicate repair scope, lead time, and status updates to customers clearly and professionally.
• Ensure parts repair in our factory or customer site meet quality requirements.
• Work with the manufacturing team and get hands on training so as in order to repair returns or on-site.
• Coordinate and support rework activities for customer returned parts in accordance with approved instructions.
• Ensure rework is performed only after proper review and authorization.
• Verify that reworked parts comply with applicable workmanship, quality, and customer specifications.
• Arrange final inspection, documentation, and release prior to shipment back to customer

Requirement

• ITE in Advance Engineering preferred (Mechanical / Manufacturing / Industrial / Mechatronics)
• No experience/fresh welcome
• Training provided

Only shortlisted candidates will be notified.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong
Senior Talent Specialist 
Atomrecruit Pte. Ltd. 
MOM EA License No.: 15C7443 
EA Personnel Reg No.: R1768368

Job Responsibilities:

• Project & Service Co-ordination with suppliers / preparation of risk assessment
• Handle installation & commissioning of HVAC & Power System
• To perform schedule preventive & corrective maintenance of the system
• To carry out troubleshooting and repair works if necessaryting and repair works if necessary.

Job Requirements:

• NITEC/ Higher NITEC/ Diploma/ Degree in Electronic & Electrical Engineering or equivalent.
• 1 - 2 years of relevant working experience.
• Fresh graduates are welcome. Necessary training will be provided to successful candidates.
• Candidate with good experience will be considered for senior post
• Possess Good Interpersonal & Communication Skills
• Able to work independently, self-motivated and a team player
• Class 3 Driving License preferred

Other Info

• Industry/ Organization Type: Datacenter / Critical Infrastructure & Industrial Segment
• Working Location: Aljunied
• Working Hours: Monday - Friday (9:00 AM - 6:00 PM)
• Salary: Basic + Allowance
• Duration: Permanent Role

ALG is currently partnering with a leading General Aviation MRO in Singapore to hire a Senior / Master Aircraft Technician (B1) for a permanent position based in Seletar.

Job Responsibilities:

• Lead and perform advanced troubleshooting, inspection, and maintenance on aircraft systems (airframe, engine, and mechanical components) in accordance with approved maintenance data and regulatory requirements

• Provide technical guidance and mentorship to junior technicians, ensuring adherence to safety, quality, and operational standards

• Support defect rectification, scheduled and unscheduled maintenance, including heavy/base maintenance checks

• Ensure all maintenance tasks and documentation are completed accurately in compliance with CAAS/EASA/FAA regulations and company procedures

• Drive continuous improvement initiatives to enhance productivity, reduce turnaround time (TAT), and maintain high-quality standards

Job Requirements:

• Minimum 10 years of relevant aircraft maintenance experience, with strong exposure to base/heavy maintenance environment

• B1 trade background is required (Airframe & Powerplant / Mechanical systems)

• Proven experience in leading teams or acting as a senior/lead technician on maintenance projects

• Strong ability to interpret and work independently with aircraft maintenance manuals and engineering drawings

• Familiar with regulatory requirements (e.g. CAAS, EASA, FAA) and MRO best practices

• Willing to perform rotating shifts, including night shifts when required

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23119425

Primary Job Responsibilities:

●     Perform quality inspections of incoming, in-process, and finished products according to quality procedures and instructions.

●     Verify that the inspected parts/materials, including packaging and labelling, meet specifications.

●     Prepare quality records after inspection completion. Ensure that the records are accurate and traceable.

●     Perform a variety of inspection methods and techniques such as visual inspection, dimensional measurements, and functional testing to determine the quality of products and component parts.

●     Able to identify recurring quality issues and support the implementation of improvement measures.

●     Maintain and clean QC equipment and instruments (i.e., microscope, gauges).

●     Complies with all Controlled Environment Room (CER) protocol, including personal hygiene, gowning, and safety procedures.

●     Participate in non-conformance materials and MRB activities related to QC inspection aspects.

Secondary Job Responsibilities:

●    Assist QC Executive on maintaining documentation.

●    Completes preventive maintenance requirements.

●    Observes equipment in operation to troubleshoot problems and ensure the proper functioning of the machines.

●    Removes defective components and replaces them with new ones.

●    Maintains inventory of spare parts for equipment.

●    Ensures all mechanical/electrical equipment supporting the facility is maintained and functioning properly.

●    Schedules any servicing that is required by 3rdparty to maintain facility requirements.

●    Ensures all documentation and service reports are completed and given to document control.

●     Any other tasks or projects that are being assigned by the immediate supervisor, as and when required.

Minimum Education Required:

●     GCE "N" level or Higher

●     SPM Level or Higher

●     Diploma Preferred

Additional Skills Required:

●    Working knowledge of current industry practices, SOP and cleanroom procedures.

●    Basic Computer Skills.

●    Able to communicate, both verbal and written, effectively and clearly.

●    Able to read and follow SOP or any required documents needed to carry out inspection.

●    Able to work independently with minimal supervision.

●    Able to work with assigned equipment and to describe mechanical problems as they arise.

Minimum Experience:

●     A minimum of one year's experience as a quality control inspector or equivalent in the medical device, pharmaceutical, or life sciences industries.

●     Working knowledge of quality control standard test/inspection tools, equipment, and sampling techniques/plans.

Supervisory Responsibilities:                          

      N/A

Working Conditions:               

●    Controlled area (Cleanroom) / Office environment

●    An applicant should not have any medical conditions that prevent accessing the controlled production area.