Total 540 process improvement manager job vacancies in Engineering category in The Philippines

Process engineer is responsible for designing and improving industrial processes to ensure safety, efficiency and productivity while minimizing waste and costs.

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering phase.

• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, utility consumption list, alarm set point list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.

• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.

• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.

• Develop design basis and UFD for utility supply system and wastewater handling system.

• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.

• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Qualifications / Experience

• Bachelor's degree in Chemical Engineering or equivalent.

• Minimum 2-5 years of process design experience for chemical plant, storage terminals or industrial waste facilities.

• Familiar with codes and standards (API, ASME, NFPA and Singapore Standard)

• Prior experience in process simulation software (HYSYS, UniSim and AFT) will be an advantage.

• Team player with strong analytical and communication skills.

• Proficiency in both spoken and written English and Mandarin is mandatory to liaise effectively with various stakeholders.

Please send us your resume in both Chinese and English.

We are seeking an experienced R&D RF Engineering Manager to lead the design, development, and optimization of RF receivers and transmitters for military-grade systems. This role involves providing technical leadership in the development of high-performance RF architectures that meet applicable military standards, including MIL-STD-461 and MIL-STD-810. The successful candidate will demonstrate strong technical expertise, leadership capability, and the ability to deliver robust solutions from concept through deployment.

Be Part of Our Success

• Lead the end-to-end design of RF receivers and transmitters, including architecture definition, component integration, signal processing, and performance optimization for military communication systems

• Provide technical leadership and mentorship to RF engineers, conduct design reviews, and ensure delivery in line with project schedules and budgets

• Perform RF simulation, modeling, and validation using tools such as ADS, HFSS, and MATLAB; oversee prototyping, testing, and iterative refinement in laboratory and field environments

• Prepare technical documentation, design specifications, and compliance reports to support internal reviews and military audits

• Identify and manage technical risks to ensure design robustness under harsh environmental conditions, including temperature extremes, vibration, and radiation

Qualities We Value

• Bachelor’s or Master’s degree in Electrical Engineering, RF Engineering, or a related discipline

• Strong expertise in RF circuit design, including mixers, oscillators, filters, amplifiers, and antennas

• Proficiency with RF design and simulation tools such as Keysight ADS, Ansys HFSS, Cadence Virtuoso, and scripting or programming in Python or C++ for design automation

• Working location is in Jalan Boon Lay

• Singaporeans only

Please apply with the following information

Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

• Well Established Company

• Basic $4300 - $4800 + AWS + Variable Bonus

• Excellent Welfare and Benefits + Career progression

• Working location: Tuas (Company Transport Provided)

• Working day: Monday to Friday

• Working hours: 8am to 5pm
  

Job Responsibilities:

• Develop technical studies towards the implementation of processes in the plant, evaluating plant capacity, process conditions, and other variables which can affect the process.

• Champion a culture of Process Safety excellence at the company based on the PSM 14 elements.

• Develops the Process Engineering Package (P&ID, PFD specification of process equipment, specification of electrical process equipment, material balances, energy balances, and DCS control logics) for the plant processes.

• Reviewing Risk Assessment Screenings and Involve in Management of change procedure and be a team player.

• Involve in design safety review procedure for all processes and be a team player.

• Manage and conduct the PHA - HAZOP program, as well as track, assist and follow up with the resulting recommendations.

• Assist with data collection for Quantitative Assessment (QRA) tools.

• Organizing and delivering effective and efficient Process Safety studies (PSI, MOC, Mechanical integrity, Operating procedures & etc. for all plant processes as needed for stewardship of processes.

• Develop Pre Start-up Safety Review (PSSR) for plant processes and follow up with the design review.

• Perform risk analysis and coach others on the use of risk analysis techniques.

• Collaborate with the teams to discover and implement long-term process improvement efforts.

• Perform audit of process safety management systems and execute risk mitigation corrective actions.

• Assisting Incident Investigation teams in investigating and classifying process safety incidents, as well as providing support in the development of process tools and action plans to close identified Process Safety gaps.

• Utilizes process simulation software to test and find the most appropriate PSM strategies.

• Other ad-hoc duties as assigned

Job Requirements:

• Minimum of Bachelor’s degree in Chemical Engineering and/or Equivalent.

• Minimum of 2 – 3 years of engineering experience supporting Operations, Engineering and/or Projects, such as plant or process engineering, project safety design, execution, engineering and/or technical service roles.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background
  

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

[Order Number: 1424724-R]

Responsibilities

• Perform process setup, optimization, and troubleshooting to ensure stable production yield and quality.
• Monitor and analyse process performance using SPC and data analysis tools, driving continuous improvement initiatives.
• Conduct root cause analysis (RCA) and implement corrective and preventive actions (CAPA) for process deviations.
• Collaborate with cross-functional teams (production, maintenance, quality) to resolve issues and improve efficiency.
• Support new product introduction (NPI), process qualification, and documentation in compliance with industry standards.

Requirements

• Non-experienced candidates are welcome to apply.
• Comfortable working in a cleanroom environment.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou

EA Personnel Registration Number: R22106434

EA License no.: 07C5771

Process Engineer /Up to $5,000 @Tuas South

• Improve processes via planning, evaluation, verification, and execution to meet specifications.

• Investigate process deviations and implement interim and long-term corrective and preventive actions.

• Support NPI & development ie. mould design, metal infiltration, heat treatment, waterjet cutting, PVD.

• Process characterization, qualification, validation & monitor performance using SPC and analyze data.

• Manage process documentation, work instructions, and control plans; review process FMEA.

• Provide technical training and guidance to technician/operators.

• Participate in cost reduction, yield improvement, and quality improvement projects.

• Collaborate with internal and customers on process, material, and equipment capability development.

• Support audits, customer technical reviews, and production ramp-up activities.

• Diploma/Degree in Materials, Mechanical, Chemical, Physics, experience in PVD, plating preferred.

• Knowledge of process control methodologies (SPC, root cause analysis, and process qualification)
  

  
  

  Interested applicants, send in your updated resume by clicking “Apply Now”.

  Lin Weikang
  EA Personnel No: R21102570
  EA License No: 23C1894

Responsibilities:

• Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

• Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

• Work with cross-functional teams on process capability improvement and yield enhancement projects

• Coordinate troubleshooting of process issues and yield losses

• Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

• Develop best practices, routine and innovative solutions for continuous improvement

• Perform Statistical data analysis for process improvement and interpretation of data

• Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements:

• Bachelor Degree in Engineering / Science related

  Knowledge of QMS, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

  Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

  Self-motivated and able to work well in a team

  Good analytical and communication skills

  Willingness and curiosity to learn attitude

  GMPTechnologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja |Registration No: R22105960

Process Engineer /5 days /Up to $5,000 @Changi

• Oversee the deliverables of the Milling and Turning sections to meet production requirements.

• Ensure First Article (FA) process stability, achieving the shortest possible cycle time at optimal cost.

• Adhere to job commitments by planning and providing accurate delivery dates.

• Prepare, document, and maintain process documentation, work instructions, and procedures.

• Collaborate with engineering, production, and quality teams to resolve process-related issues.

• Diploma in Mechanical with 3 years of experience in CAD and CAM applications.

• Proficient in , and understanding of processes for milling and turning

• Hands-on machine setup for Horizontal CNC Machining & proficient in SolidWorks & Hypermill

  
  

  
  Interested applicants, send in your updated resume by clicking “Apply Now”.

  Lin Weikang
  EA Personnel No: R21102570
  EA License No: 23C1894

5 Days Work Weeks

Monday to Friday : 0830 – 1745

Job Responsibilities:

Leadership & Strategy

· Lead, mentor, and develop a team of manufacturing/process engineers and technicians.

· Establish engineering priorities aligned with production schedules, quality goals, and business KPIs.

· Collaborate with plant leadership to develop long-term manufacturing strategies (capacity, automation, footprint).

Process Optimization & Continuous Improvement

· Analyze production data to identify root causes of downtime, defects, or bottlenecks.

· Implement standardized work, error-proofing (poka-yoke), and rapid changeover techniques.

Cross-Functional Collaboration

· Work with Production to resolve daily technical issues and improve throughput.

· Partner with Quality to address root causes of non-conformances and implement corrective actions.

· Strong cross-functional collaboration and customer communication skills.

Documentation & Standards

· Maintain accurate master document, plant layouts, work instructions, and equipment records.

· Establish engineering standards for material selection, tolerances, and vendor qualifications.

Job Requirements:

Education & Experience

· Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.

· At least 5 years of experience in manufacturing engineering, with at least 3 years in a supervisory/management role.

· Proficiency with CAD software (e.g., SolidWorks, AutoCAD) and data analysis tools (e.g., Excel, Power BI).

· Knowledge of ERP/MES systems for routing and BOM management.

Soft Skills

· Proven ability to lead technical root-cause analysis (8D, DMAIC).

· Strong communication – able to translate complex technical issues for shop floor and executive audiences.

· Decisive under pressure, with a bias for action in a fast-paced manufacturing environment.

Employer Questions

Your application will include the following questions:

• How much notice are you required to give your current employer?
• What’s your expected salary?

Responsibilities:

·       Develop technical studies towards theimplementation of processes in the plant evaluating plant capacity, processconditions, and other variables which can affect the process.

·       Champion a culture of Process Safety excellence atthe company based on the PSM 14 elements.

·       Develops the Process Engineering Package (P&ID,PFD specification of process equipment, specification of electrical processequipment, material balances, energy balances, and DCS control logics) for theplant processes.

·       Reviewing Risk Assessment Screenings and Involve inManagement of change procedure and be a team player.

·       Involve in design safety review procedure for allprocesses and be a team player.

·       Manage and conduct the PHA - HAZOP program, as wellas track, assist and follow up with the resulting recommendations.

·       Assist with data collection for QuantitativeAssessment (QRA) tools.

·       Organizing and delivering effective and efficientProcess Safety studies (PSI, MOC, Mechanical integrity, Operating procedures& etc. for all plant processes as needed for stewardship of processes.

·       Develop Pre Start-up Safety Review (PSSR) for plantprocesses and follow up with the design review.

·       Perform risk analysis and coach others on the useof risk analysis techniques.

·       Collaborate with the teams to discover andimplement long-term process improvement efforts.

·       Perform audit of process safety management systemsand execute risk mitigation corrective actions.

·       Assisting Incident Investigation teams ininvestigating and classifying process safety incidents, as well as providingsupport in the development of process tools and action plans to closeidentified Process Safety gaps.

·       Utilizes process simulation software to test andfind the most appropriate PSM strategies.

Requirements:

·       Minimum of Bachelor’s degree in ChemicalEngineering and/or Equivalent

·       Minimum of 2 – 5 years of engineering experiencesupporting Operations, Engineering and/or Projects, such as plant or processengineering, project safety design, execution, engineering and/or technicalservice roles

Core Process Safety & Engineering Knowledge

·       Solid understanding of process safety elements,practical knowledge leading hazard assessments and exposure to industry APICodes and Standards

·       Solid understanding of Piping and Instrumentationdrawing (P&ID) and Process Flow Diagram (PFD) / Block flow diagram.

·       Familiar with Management of Change (MOC), RiskManagement, and Process Hazard Analysis (PHA) risk assessments and PSMelements.

·       Fluent in managing and evaluating the applicabilityof technical safety/risk studies in projects. Understanding of process hazards,failure mechanisms, and safeguards

·       Team oriented and dynamic

·       Ability to troubleshoot process problems, identifyand implement corrective actions

Additional Requirements

·       Strong computer skills, including MS Office, Exceland Power Point, AutoCAD (added advantage)

·       Good communication & presentation skills arepreferred

Other info:

·  Waste management company

·  Salary $4000 - $4800

·  5-day work / 8am –5pm

·  Company transport /Transport allowance

Interested candidates, pls apply withresume in MS Word format.

You may email tosylvia@recruitspecialists.com.sg

EA License No: 17C8809

EA Reg No: R1108561

About the Company

Our client is a well-established organisation with a strong presence in the transport and infrastructure sector.

Responsibilities

We’re looking for an Engineering Operations Manager to manage and optimise the performance of a specialised engineering facility. This role focuses on ensuring safe, reliable, and efficient operations across testing, maintenance, and infrastructure systems, while supporting future capability development.

• Lead day-to-day operations of engineering facilities, including testing environments, workshops, and technical infrastructure;
• Ensure high standards of safety, system reliability, and operational performance across all activities;
• Lead maintenance strategies, asset lifecycle management, and resource planning for critical equipment and facilities;
• Drive continuous improvement initiatives, leveraging engineering best practices to enhance efficiency and uptime;
• Ensure compliance with relevant safety, engineering, and regulatory standards, with robust risk management controls;
• Analyse operational data and prepare reports to support performance monitoring and decision-making;
• Lead and develop a multidisciplinary engineering and operations team, fostering technical excellence and a safety-first culture;
• Collaborate with internal stakeholders to support new technical capabilities, test environments, and service offerings;
• Provide engineering input on feasibility, system requirements, and resource planning for new initiatives and projects.

Requirements

• Degree in Engineering or a related technical discipline;
• At least 8 years of experience in engineering operations, technical facilities, or infrastructure environments;
• Strong experience in maintenance management, asset reliability, and operational engineering practices;
• Proven ability to lead technical teams and manage complex operational environments;
• Familiarity with safety standards, regulatory compliance, and risk management;
• Strong operational leadership with a focus on safety and system performance;
• Analytical and structured problem-solver with an engineering mindset;
• Collaborative and adaptable in a dynamic environment;
• High level of professionalism and accountability.

Employment Details

• Excellent opportunity with clear career progression pathway;
• Supportive environment for professional development;
• Competitive compensation and benefits.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Cleon Tan (Regn No. R1547199) at cleon@fcs-careers.com for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer (dpo@fcs-careers.com).

• West
• EPC Firm
• 5 Days work week

As a global Organization in design, engineering, procurement, and construction in controlled and regulated environments, our client offers a complete range of services from consulting to the managing of turnkey solutions – delivered to the highest quality and safety standards

About the role;

Reporting to the Lead Process Engineer, you will take responsibility within our project team for the handling of all process challenges from the design phase till the completion and handover to the client.

Job Description

• Lead end-to-end process design from concept, basic, and detailed design phases through to implementation, commissioning, and handover.
• Develop and review key process deliverables, including PFDs, P&IDs, process calculations, equipment sizing, utility balances, and technical specifications.
• Define process system design based on user requirements (URS), including capacity calculations and system architecture for industrial and biopharma applications.
• Conduct and lead design reviews with clients and internal stakeholders, ensuring alignment with project scope, standards, and best practices.
• Support tendering activities, including cost estimation, technical proposal preparation, and evaluation of vendor and subcontractor submissions.
• Review and approve vendor and subcontractor designs, ensuring compliance with project specifications, quality standards, and regulatory requirements.
• Oversee construction, installation, and commissioning activities, ensuring systems are delivered in line with design intent, schedule, and quality expectations.
• Monitor start-up activities, troubleshoot design and site issues, and provide technical solutions to ensure successful system performance.
• Ensure compliance with safety, environmental, and quality standards, including participation in risk assessments and process hazard reviews.
• Mentor junior engineers, support knowledge development, and contribute to continuous improvement, industry engagement, and internal engineering standards.

Job Requirement

• Master´s or Bachelor's degree in Civil, Industrial, Chemical, Mechanical or Bio-Engineering, with a specialization in biotech process and/or Clean Utilities engineering
• 4-5 years of work experience as a process engineer in the mission critical facility industry
• First experience in construction and commissioning / qualification is an asset
• Knowledge in line sizing simulation tools, engineering codes or construction experience is considered an asset
• You are committed, flexible, creative, assertive, communicative, motivated and well-organized
• You like working in a team but you can also function in an independent and safe way, you will be able to solve technical issues

OTHER INFORMATION:

• Location : West
• Working days : 5 days work week
• Salary : $9,000 and Bons

The Company strives to achieve employee satisfaction and provides conducive working environment to all staff.

HOW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ /
or call your friendly Consultant, David, at 6590 9958 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• West
• EPC Firm
• 5 Days work week
• Prior Exposure to Biopharma projects is advantageous

As a global Organization in design, engineering, procurement, and construction in controlled and regulated environments, our client offers a complete range of services from consulting to the managing of turnkey solutions – delivered to the highest quality and safety standards

About the role;

Reporting to the Lead Process Engineer, you will take responsibility within our project team for the handling of all process challenges from the design phase till the completion and handover to the client.

Job Description

• Lead process systems from conceptual design through detailed design, construction, commissioning, and final handover.
• Develop and progress key design deliverables, including PFDs, P&IDs, specifications, datasheets, and functional descriptions in line with project requirements.
• Perform engineering calculations such as equipment sizing, pressure loss, and heat & mass balances, including capacity assessments based on client URS.
• Participate in and support design reviews with clients and internal stakeholders, ensuring alignment with technical and commercial requirements.
• Prepare tender specifications, evaluate bids, and support subcontractor selection and appointment processes.
• Review and approve technical submittals, subcontractor designs, and ensure all interfaces and system integrations meet specifications.
• Oversee installation, testing, and commissioning activities, including defining acceptance criteria, managing site testing, and closing punch lists.
• Monitor construction progress, quality, and subcontractor performance, including review of variations, claims, and installation standards.
• Ensure proper documentation throughout the project lifecycle, including test packs, as-built drawings, and handover manuals.
• Act as Work Package Owner (WPO), managing assigned packages end-to-end while promoting safe work practices, professionalism, and alignment with company objectives.

Job Requirement

• Master´s or Bachelor's degree in Civil, Industrial, Chemical, Mechanical or Bio-Engineering, with a specialization in biotech process and/or Clean Utilities engineering
• 2-4 years of work experience as a process engineer in the mission critical facility industry
• First experience in construction and commissioning / qualification is an asset
• Knowledge in line sizing simulation tools, engineering codes or construction experience is considered an asset
• You are committed, flexible, creative, assertive, communicative, motivated and well-organized
• You like working in a team but you can also function in an independent and safe way, you will be able to solve technical issues

OTHER INFORMATION:

• Location : West
• Working days : 5 days work week
• Salary : $6,000 and Bons

The Company strives to achieve employee satisfaction and provides conducive working environment to all staff.

HOW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ /
or call your friendly Consultant, David, at 6590 9958 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

We are seeking a Process Engineer with a minimum of 2 years of hands-on experience in semiconductor back-end assembly processes, particularly die bonding and wire bonding. The successful candidate will be responsible for process setup, optimization, yield improvement, and troubleshooting to ensure stable and high-quality manufacturing performance.

The role requires strong technical understanding of back-end equipment, materials, and process interactions, as well as the ability to analyze data, drive continuous improvement, and support production operations.

Key Responsibilities

• Develop, optimize, and sustain die bond and wire bond processes to meet quality, yield, and reliability requirements
• Perform process troubleshooting and root cause analysis for yield loss, defects, and equipment issues
• Support new product introduction (NPI), process qualification, and transfer to mass production
• Establish and maintain process parameters, work instructions, and control plans
• Analyze process data using statistical methods (e.g. SPC, CPK, trend analysis)
• Collaborate with cross-functional teams including Production, Quality, Equipment, and R&D
• Drive continuous improvement activities for cost, yield, cycle time, and reliability 

Job Details:

You will be part of the technical specialists working at the waste management facilities including Integrated Waste Management Facility (IWMF) - a large-scale waste management infrastructural project, and Tuas South Incineration Plant (TSIP).

· You may be part of the project team to supervise IWMF construction progress.

The work scope includes:

1. To work with project consultants and key stakeholders, such as other government agencies, on the design of the various facilities in IWMF and ensure that IWMF is constructed, erected, installed in accordance with design specifications and complying with statutory requirement.
2. To participate in the testing, commissioning of mechanical, process, or electrical, instrument, control and automation equipment/systems.
3. To attend factory acceptance tests (FATs) at local and overseas factories to witness and verify quality and performance of major equipment/systems.

· You may be part of the technical team in the operation and maintenance of TSIP. Your work scope includes:

1. To lead a team of technical supervisors and specialists and coordinate maintenance work between contractors and maintenance sections to ensure the safe, smooth and efficient operations of the waste-to-energy facility.
2. To implement preventive maintenance and overhaul programs for the facility's electrical and control equipment such as turbo-generators, motors, switchgears, low tension and high tension equipment, distributed control system and field instruments.
3. To administer contracts for the operation and maintenance of mechanical, EICA or building services equipment
4. To enforce permit-to-work system and safe work culture including supervising contractors’ work for quality and safety
5. To formulate and prepare standard operating and safety procedures, equipment testing / changeover programmes
6. To perform shift work in a waste-to-energy facility, if needed
7. To work closely with the management of TSIP to implement initiatives on safety and continuous improvement to enhance the safety culture and standards within the plant, as well as drive projects to achieve operational excellence.

Job Requirements:

• Degree in Engineering (Mechanical, Electrical, Civil and Structural Engineering, Chemical, Environmental Engineering)
• Preferably with 3-5 years of relevant experience. Fresh graduates are welcome to apply*.
• Candidates with professional certification, e.g. Professional Engineer, Steam Engineer, Licensed Electrical Worker, Workplace Safety and Health Officer, will be given preference
• Possess good technical background and strong analytical skills. Knowledge in solid waste management would be an advantage
• Proficient in Microsoft Office, and preferably in Navisworks and Primavera P6
• Mature, independent, resourceful, and a good team player
• Good interpersonal communication, presentation and writing skills
• Able to perform shift work will be advantageous
• Able to work at construction sites and travel overseas for FATs and training

As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

*Officers will first undergo training such as foundation modules on the operation and maintenance of waste management facilities and WTE plants; and an attachment with On-Job-Training at TSIP.  Thereafter, they can be deployed for shift or non-shift work at IWMF or TSIP.

Location: Tuas

Working Arrangement:

Working Day : Everyday

(including weekends and public holidays depending on 12-hour shift cycle)

Rest Day : 5 rest days within one 15-day

Salary: TBC depending on relevant experience

Permanent Position

EA License No.: 96C4864

Reg No.: R26159658 BRANN LEONG CHUN HOE

Process Engineer (Pick and Place) is responsible for development andestablishment of production process.

Responsibilities

• Establish, review and update specifications, workflow, quality and safety related documentation for Pick and Place process within production line.

• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.

• Process sustaining and control through SPC and periodic defect Pareto Analysis.

• Lead and drive SPC control

• Review and maintain FMEA, Control plan, OCAP with cross-functional teams.

• Handle and manage customer audits and 8D reports.

• Provide disposition for engineering and production lots.

• Conduct process characterization andqualification to establish process baseline.

• Coordinate and liaise with vendor/suppliers on process issue or quality issue.

• Support customer NPI activities and internal engineering activities.

• New material, process & machine development and qualification.

• Review and accept machine buyoff,setup pilot line process and transfer from pilot to production line

Requirement

• Minimum Degree in Electrical & Electronics, Microelectronics, Mechanical engineering or relevant engineering discipline

• Experience in Semiconductor manufacturing industry and working in cleanroom environment

• Minimum 3 years hands-on Pick and Place Process within semiconductor /electronics manufacturing industry

• Experience in SPC, DOE, FEMA, and 8D reports