Total 2,948 Others level Art / Design / Entertainment job vacancies

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities:

• Involved in large projects ranging from commercial, industrial, institutional, residential, mixed development, healthcare, infrastructure and MRT/rail etc.
• To lead, manage and coordination of projects complying with authorities' requirements and standards.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Strong leadership skills and ability to work as a team.
• Ensure compliance with local building codes and regulations.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Keep updated on contractual and authorities' requirements.
• Nurture, coach and upgrade skill levels of team members.

Requirements:

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 10 years of post-graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Company Overview

PAND Design delivers tailored commercial interiors for corporate clients. Our creative team values collaboration, swift execution, and attention to detail. We listen to clients to create workspaces that fit their needs and culture, fostering an environment of creativity and teamwork.

Job Summary

Support project delivery by coordinating with teams and contractors to ensure timely, cost-effective, and quality completion of corporate office fit-out projects, working full-time on-site.

Responsibilities

• Collaborate with the Project Manager to execute assigned project tasks effectively
• Coordinate communication and activities between project and design teams to ensure alignment
• Monitor project progress to meet deadlines, budget, quality standards, and ensure smooth handover
• Manage contractors on-site to ensure timely and quality delivery of project components
• Work full-time at the job site to oversee daily operations and resolve issues promptly

Preferred competencies and qualifications

• Minimum 1 year experience as a Project Executive in Design & Build or similar environment
• Experience in corporate office fit-out projects, including new builds and renovations, with knowledge of MEP systems
• Proficient in Microsoft Excel and Word; familiarity with MS Project is advantageous
• Strong communication skills to effectively interact with subcontractors and team members
• Ability to perform well under pressure and adapt to dynamic project demands
• Willingness to work full-time on-site
• Training will be provided

We are looking for an experienced and self-driven Senior Design Engineer(Electrical) for one of our clients, a well-established and reputable leader in the industrial and engineering services sector. This person will specialize in the customized electrical design of diesel generator sets, synchronization systems, switchgear, and advanced control systems. You will be responsible for the full design lifecycle— from initial conceptualization and BOM creation to factory production support and site troubleshooting—ensuring seamless integration with industry equipment such as BMS and power protection systems.

Key Responsibilities

·       Design & Engineering: Develop comprehensive electrical drawings, accurate Bills of Materials (BOM), and technical documentation required for high-quality factory fabrication.

·       Standards & Compliance: Ensure all designs adhere to international ISO standards and specific regional regulatory requirements.

·       Production &Manufacturing Support: Collaborate closely with the manufacturing team to oversee electrical installations, ensuring a smooth production flow and resolving design issues on the factory floor.

·       Supply Chain Integration: Work with procurement to identify, engage, and qualify high-performance suppliers and components.

·       Sales & Tender Support: Partner with Industrial Solutions and Sales teams to interpret complex design requirements and provide technical expertise for timely tender submissions.

·       System Programming &Testing: Design and program various controllers, PLCs, and HMIs. Lead testing and validation phases, including parameter optimization for governors, AVRs, and PLCs.

·       Technical Support: Provide expert troubleshooting assistance both remotely and on-site to resolve critical system issues.

·       Continuous Improvement: Spearhead engineering projects aimed at cost reduction, workflow efficiency, and the implementation of process change management methodologies.

·       Mentorship: Lead and develop junior engineers by providing training and ensuring adherence to standardized engineering best practices.

Requirements

·       A Degree in Electrical Engineering with 7–8 years of relevant experience, or a Diploma in Electrical Engineering with 10–12 years of deep industry experience.

·       Advanced proficiency in SEE Electrical is mandatory.

·       Comprehensive knowledge of diesel generator controllers, alternator concepts, switchgear, and transformers is essential.

·       Strong background in PLC electrical design, HMI programming, and system integration.

·       Proven ability to manage process changes and a track record of mentoring technical teams.

·       Specific subject matter expertise in niche electrical power fields or advanced automation will be highly regarded.

To apply, please send your cv to talentagent@innergy-consulting.com.

We regret that only shortlisted candidates will be notified. Thank you for your understanding!

Design Engineer (Civil & Structural) - LTA Project

• Industry: A1 Main Contractor - Korean MNC
• Office is near Jurong East MRT, Singapore
• Site is at Jurong East MRT
• 5.5 Days 8am-6pm / 8am-12pm
• Salary: $3,500 - $6,000 + Bonus

Summary

• We are seeking an experienced Design Engineer (Civil & Structural) to support major LTA MRT projects, work closely with the Design Manager and project teams to ensure timely, accurate, and compliant design throughout the project lifecycle.

Requirements

• Degree in Civil Engineering or related discipline.
• Minimum 5 years of engineering experience.
• At least 3 years of experience in civil & structural or architectural design for LTA MRT projects.

Job Description

• Assist the Design Manager and oversee the overall progress of design works on site.
• Manage drawing submission schedules in line with planned construction progress.
• Coordinate and review all design matters with LTA, authorities, consultants, and subcontractors.
• Provide technical solutions and offer design advice to internal teams.
• Manage and control design deliverables related to BIM, Technical, contractual, and cost requirements.
• Review subcontractors' shop drawings to ensure compliance with the design specifications and project standards.

If you are keen to apply, please send me your resume and job applied for on WhatsApp at 9789 3505 or email me at anabel.thesupreme@gmail.com (˶ᵔ ᵕ ᵔ˶)

❄️Anabel Boon Xue Qi | Recruitment Consultant (R25159272) |

Position title: Interior Designer  / Senior Interior Designer 

Location: 51 Anson Road, Anson Centre, 079904, 079904

Working Days: 5 days, Monday-Friday

Working hours : 9 to 6 p.m

Salary : $3,000-$5,000

Responsibilities

• Undertake design project from concept to completion
• Define project requirements and schedule during the “brief”
• Interpret and translate customer needs into rough plans
• Set costs and project fees according to budget
• Research and decide on materials and products sourcing
• Produce “sample” and “mood products”
• Supervise work progress
• Work closely with designers, decorators, architects and constructors
• Research and follow industry changes, evolutions and best practises
   

Requirements

• Proven working experience in decorating interior spaces (consultations, renovations, space planning and new constructions)
• Expertise in layout, colour, lighting, materials selection, custom furniture and all installations.
• Proficient in AutoCAD, SketchUp, 3D Max, Illustrator or other design programs
• Excellent portfolio of previous works
• Diploma in Interior Design or similar

If you are keen to apply, please send me your resume and job applied for on WhatsApp at 9789 3505 or email me at anabel.thesupreme@gmail.com (˶ᵔ ᵕ ᵔ˶)

❄️Anabel Boon Xue Qi | Recruitment Consultant (R25159272) |

 Role Overview

We are a boutique luxury design consultancy specializing in high-end projects. Our work focuses on refined aesthetics, meticulous detailing, and exceptional client service.Our team includes a Manager, Architectural Designer, Draftsmen, and Administrative support. As our studio continues to grow, we are seeking an experienced Creative Director to lead the studio's creative direction and deliver exceptional, high-end design projects. This role balances creative leadership and execution, ensuring all work aligns with the studio's brand, meets expectations, and is delivered to the highest standards.

Key Responsibilities

Creative Direction

Define and lead the studio’s overall design vision and identity

Oversee concepts, design narratives, and material selections

Ensure consistently high design standards across all projects

Design Leadership

Lead projects from concept to completion

Review and approve all design deliverables

Mentor and guide the design team

Provide clear leadership, accountability and structure

Maintain a professional, disciplined and collaborative work environment

Client Management

Lead client presentations and design discussions

Translate client briefs into refined, high-end concepts

Build strong relationships with high-net-worth clients

The Creative Director is expected to actively support business development by identifying new opportunities, building strong client relationships, and contributing to the acquisition of new projects.

Team & Studio Leadership

Lead and manage the design team (Architectural, Interior, Drafting)

Foster a high-performance, design-driven culture

Align creative direction with project timelines and budgets

Quality & Innovation

Maintain strict quality control and brand consistency

Stay ahead of design trends and source premium materials/suppliers

Requirements
10+ years in interior design / architecture/ design consultancy industry (luxury focus)

Proven Creative Director or senior design leadership experience

Strong portfolio in high-end residential or bespoke projects

Excellent design, presentation, and client management skills

Experience leading teams and managing project delivery

Strong commercial awareness (fees, budgets, profitability)

Preferred

Experience with high-net-worth clients

Strong organizational and leadership skills

Detail oriented with a focus on efficiency and accountability

Strong knowledge of luxury materials and suppliers

Ability to balance creativity with structure and execution

What We Offer

Opportunity to take on a key leadership position within a growing luxury design consultancy.

Autonomy to review, improve and implement procedures, structures and workflow

Exposure to high-end projects

Collaborative and design-focused studio environment

Competitive salary and performance-based incentives aligned with studio and project performance.

Job Summary

The Performing Artiste Manager is responsible for the strategic and operational management of the venue’s entertainment lineup. This role acts as the bridge between creative talent and business goals. You will oversee talent scouting, contract negotiations, and the daily execution of live shows to ensure the entertainment consistently enhances the venue's atmosphere and drives guest satisfaction.

Key Responsibilities

• Talent Scouting & Programming: Proactively source and audition vocalists, bands, and DJs. Curate a monthly entertainment calendar that aligns with the venue’s branding and target demographics.

• Contracting & Compliance: Negotiate performance fees and terms. Ensure all performers have valid contracts and that the venue adheres to local regulations regarding live performances and entertainment licensing.

• Performance Management: Set KPIs for performers regarding stage presence, repertoire diversity, and audience interaction. Conduct regular performance reviews and provide creative coaching.

• Budget Oversight: Manage the monthly entertainment budget, ensuring high-quality talent is secured while maintaining a healthy return on investment.

• Strategic Planning: Collaborate with the Marketing and F&B teams to develop themed nights, seasonal events, and promotional campaigns that leverage the artistes' following.

Ad Hoc Tasks

• Administrative Coordination: Assist with the documentation required for Work Pass applications or professional visit passes for foreign performers, ensuring all paperwork is submitted to relevant authorities.

• Social Media Direction: Direct and oversee the creation of high-quality "Live" snippets or behind-the-scenes content for platforms like TikTok and Instagram to build the venue’s online brand.

• Guest Experience Liaison: Handle special requests from VIP guests, such as song dedications or organizing "Meet and Greet" moments with lead performers.

• Technical Troubleshooting: Coordinate with the sound and lighting crew to resolve equipment issues or stage layout changes for special guest appearances.

• Market Intelligence: Periodically visit competing venues to stay informed about industry trends, popular music styles, and emerging talent in the local circuit.
  

  Any other ad hoc tasks assigned.
  

Requirements

• Strong negotiation skills

• Excellent interpersonal skills with the ability to manage diverse creative personalities.

• Willingness to work non-traditional hours, including late nights, weekends, and public holidays.

Key Competencies

• Leadership: Ability to inspire performers and maintain high morale within the entertainment department.

• Operational Excellence: Strong organizational skills to manage complex schedules and multiple concurrent projects.

• Commercial Acumen: Ability to balance artistic quality with the venue's financial goals.

Supervisor assist in the execution of theproject assigned to candidate by ProjectEngineer.Assist in the requisition of resourcesfor the project such as labour,materials,equipment and others.Assist inhandling / storing of materials /equipment.Reduce/minimise wastage ofmaterials /equipment.Liaise with affiliatedparties for the material delivery.To ensureproper the handover process of project to thecustomer upon project completion. Ensuresafety practices are followed.To assistengineer to carry out inspections of incomingmaterials and equipment for the projects atthe work site. Conduct quality checks of subontractor/vendor works daily. Arrange siteinspection with client/main contractorsrepresentative and update site installationprogress.To update the drafter on sitechanges regularly.Arrange and obtain forpermit to work before execution of site. Raisenon conformance product report fornonconforming products. Carried outassignment as detailed by the Senior Manager/ Project Manager / Assistant Project Manager.

Job Description

• Industry/ Organization Type: Heavy Equipment
• Position Title: Mechanical Design Engineer
• Working Location: Tuas
• Working Hours: 5.5 days (Mon - Fri, 8.00am - 7.00pm; Sat, 8.00am - 12.00pm)
• Salary Package: Basic salary up to $4,800 + Allowance + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Design and improve mechanical systems for battery handling, charging, and swapping
• Prepare detailed drawings and specifications for mechanical parts
• Choose, order, and buy needed mechanical parts and machines
• Set up and follow maintenance schedules to keep equipment running well
• Make sure all designs follow safety and industry rules
• Apply safety rules for staff and equipment
• Inspect and test mechanical systems to make sure they work properly
• Find and fix mechanical problems
• Work with other teams and project managers to plan and complete projects
• Give advice on mechanical engineering for project planning
• Handle electrical and hydraulic problems
• Repair rotary drilling rigs

APPLY NOW!!!

• Bachelor’s degree in mechanical engineering
• Experience in maintenance work
• Good understanding of mechanical engineering basics
• Skilled in using CAD software
• Understanding of rotary drilling rig functionality is advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76390 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• The position is temporary.
• Only shortlisted candidates will be contacted.
• The position is for a few days/weeks per month (irregular schedule as per project’s need), and the salary will be prorated.
• We have two positions available.

Required experience:

·       We are looking for a Senior Solution Architect in the area of SAP Public Sector Industry Healthcare Software Solutions fitment, with focus topic of Charging, Billing, Tax and Revenue Management.

·       Solution would be built on SAP BRIM (Billing & Revenue Innovation Management) requiring niche skills in Convergent Invoicing and Integration with other SAP Solution Areas and Non-SAP Systems.

·       The use of SAP Software Development tools and methodology such as Scrum and Agile Methodologies is also included in order to perform the job effectively.

Job Description:

·       Senior Solution Architect role at customer location in Singapore is envisaged for a client in the Healthcare Industry. They would be required to get involved in Project Blueprint meetings. During key decision making on Project design, his knowledge would be required to inform key member about Best Practices.

·       They would be involved in finalizing Technical design and Sprint Plan using Agile Methodologies and tools and template, which is going to be used till end of project.

·       They must have strong expertise in SAP BRIM (Billing & Revenue Innovation Management) and especially Convergent Charging.

·       They would be also participating in validating Healthcare Charging and Billing Project related functional requirements and responsible for coming up with end-to-end technical solution for the scoped work for Development.

·       They need to come up with list of Product Gaps; they would also help in determining key milestones which would be required to achieve during the project execution.

·       They need to give their expert advice in preparation of technical solution/strategy approach documents which would be adopted during execution of the project.

·       They need to work in collaboration with other technical team members who are experts in other existing development program and projects related to Client and align with the other Charging and Billing Consulting Partners initiatives to arrive at the Solution Proposal to deliver Client objectives of the Project.

·       Architect and Drive Realization with development teams to achieve the objectives set out for Charging and Billing Transformation at Customer/Client.          

Tasks:

·       Understand customer’s requirements by attending blue printing meetings and existing System environment.

·       Identify product GAP in SAP Public Sector Healthcare Software Solution Components side and perform GAP analysis along with Custom developments option. 

·       Create a custom development list to cover product GAP.

·       Develop an understanding of Technical Design Specification Template.

·       Work closely with Integration area consultants to support arriving at an End-to-end Customer Specific Software Solution definition. 

·       Participate in the blueprint meetings with the customer.

·       Coordinate meeting between the offshore and onsite consultants.

·       Gather and Document Customer requirements.

·       Participate in the internal stake holders’ meetings for logical closure of the Development Proposal.

·       Align with offshore team on realization of the requirement.

·       Conduct client reviews on realization of requirements.

·       Conduct and assist in integration and user acceptance testing.

• Join our growing architectural firm in Singapore, specializing in industrial, workers' dormitory and other specialised industry, including energy projects!

• We're seeking an experienced Architectural Drafter with at least 3 years of experience in architectural practice and eager to expand their horizons beyond the usual residential scope.

• Position: Architectural Drafter

• Location: Suntec City Office Tower2

• Website:https://designloftarchitects.com.sg

• Working hours : Monday - Friday9am - 6pm

• Salary (commensurate with experience) : Up to $5000 + 16.5 Days Annual Leave

• Duration: Permanent

• Industry: Architecture/Building & Construction

• Assist the project team to complete projects on time, on budget and according to client and authority’s requirements.

• Assist multiple projects concurrently from design stage to project completion under guidance.

• Assist in the production of all drawings development required by the project including Submission drawings, detailed drawings, construction drawing, as-built etc

• Make submissions to authority and ensure all forms, drawings are submitted correct and liaise with authority for all submission matters as required under the supervision of seniors

• Ensure project team’s current workflow practices are in line with company standards and proposed improvements.

• Establish good working relationships with different parties to promote continued partnerships.

• Other ad-hoc activities assigned, such as site visits to understand the relationship between drawings and construction.

Min diploma in architecture and experience in handling design-to-construction phases, along with skills in CAD and BIM software, are typically required.

Team bonding is a top priority for us. We believe that team bonding helps build trust, communication, and collaboration among team members, ultimately leading to:

* Stronger relationships

* Improved communication

* Enhanced teamwork and collaboration

* Boosted morale and motivation

* A sense of belonging

Email to: acc.dloft@gmail.com or call: 9272 2201 for more information

If you're ready for new challenges and opportunities, apply now!

• Curate and coordinate captivating performances that enhance guest experience and event impact
• Manage a diverse team of performance artists by scheduling artists, coordinating rehearsals, and overseeing performance timelines to ensure seamless execution
• Train and guide performing artists to elevate their skills and improve performance quality
• Plan and execute special performances for holidays, anniversaries, and other club events to drive audience engagement
• Maintain discipline and professionalism among artists to uphold performance standards and company reputation
• Ensure safety of crews on and off stage by identifying and reporting hazardous conditions promptly
• Resolve interpersonal conflicts between artists to maintain a collaborative and productive team environment
• Supervise staff activities in compliance with company policies and applicable laws to ensure operational integrity
• Support management by addressing performer-related issues and facilitating smooth operations
• Deliver hospitality excellence to guests through attentive coordination and performance quality