Total 261 Junior Executive system technician job vacancies

Job Descriptions:

• Provide on field technical assistance and service all small items, massage chairs, fitness products and other health related products.
• Make appointment with customers and arrange doorstep technical / customer service
• Respond promptly and address all customers’ cases within stipulated working days upon receiving the service request
• Conduct QC test on products and trouble shooting

Job Requirements:

• Possess at least a Diploma in Mechanical, Electrical or Electronic Engineering, preferable with a valid A0 Chargeman certificate.
• Candidates with at least two (2) years of working experience relating to outdoor servicing or Quality Control are encouraged to apply.
• Possess a valid license and willing to travel. Those with GDL license would be advantages.
• Mature, well organized with excellent customer service skills.
• Good command of both oral and written English and Bahasa Malaysia.
• Fresh graduates are encouraged to apply.
• Able to start work in short notice

Perks & Benefits

• Commission and bonus
• Medical insurance
• Personal leave
• Medical & Dental Benefit
• Birthday Leave

職位描述：

• 提供現場技術援助和服務，包括所有小型物品、按摩椅、健身產品和其他健康相關產品。
• 與客戶預約並安排上門技術/客戶服務
• 收到服務請求後，應在規定的工作日內及時回覆並處理所有客戶提出的問題。
• 對產品進行品質控制測試和故障排除

職位要求：

• 至少擁有機械、電氣或電子工程專業的文憑，最好持有有效的A0級主管證明。
• 歡迎至少兩 (2) 年戶外服務或品質控制相關工作經驗的候選人申請。
• 持有有效駕照並願意出差。持有GDL駕照者優先考慮。
• 成熟穩重，做事井井有條，具備優秀的客戶服務技能。
• 英語和馬來語口語和書面表達能力良好。
• 歡迎應屆畢業生申請。
• 能夠立即開始工作

福利待遇

• 佣金和獎金
• 醫療保險
• 個人休假
• 醫療和牙科福利
• 生日假

Requirements:

•⁠ ⁠Basic technical knowledge or without experience

•⁠ ⁠Responsible and hardworking

•⁠ ⁠Able to work independently

•⁠ ⁠Good attitude and willing to learn

•⁠ ⁠Possess own transport (preferred)

•⁠ ⁠Able to travel when required

•⁠ ⁠Punctual

Job Scope:

•⁠ ⁠Installation and maintenance work

•⁠ ⁠Troubleshooting and repair

•⁠ ⁠Support technical service when required

Interested applicants please contact:

Amy - 017 3350 067 / 019 278 3190 / 03 8070 5500

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

Requirements:

•⁠ ⁠Basic technical knowledge or without experience

•⁠ ⁠Responsible and hardworking

•⁠ ⁠Able to work independently

•⁠ ⁠Good attitude and willing to learn

•⁠ ⁠Possess own transport (preferred)

•⁠ ⁠Able to travel when required

•⁠ ⁠Punctual

Job Scope:

•⁠ ⁠Installation and maintenance work

•⁠ ⁠Troubleshooting and repair

•⁠ ⁠Support technical service when required

Interested applicants please contact:

Amy - 017 3350 067 / 019 278 3190 / 03 8070 5500

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

JOB DESCRIPTION

• Responsible for implementing, maintaining, and improving the company's Quality and Environmental Management Systems in compliance with ISO 9001 and ISO 14001 requirements.
• Coordinates across Sales, Engineering, Procurement, Project, Commissioning & Service departments to ensure effective system

RESPONSIBILITIES

1) Implement and maintain the Quality Management System (QMS) and Environmental Management System (EMS) in accordance with ISO 9001 & ISO 14001

2) Coordinate and monitor the implementation of ISO requirements across departments

3) Maintain document control and master document list

4) Control QMS and EMS documentation including SOPs, procedures, records and forms

5) Monitor quality & enviromental objectives, collect KPI data, prepare performance reports and follow up on improvement actions

6) Monitor non-conformance and improvement actions

7) Coordinate internal audits and follow up on Corrective Action and Preventive Action (CAPA)

8) Prepare certification audit documentation, liaise with certification body and support audit closure

9) Monitor project quality documentation and maintain project ISO compliance

10) Assist and Support the Management Representative (MR)

11) Support management review activities and reporting, coordinate ISO activities

REQUIREMENTS

1) Diploma or Bachelor's Degree in Engineering, Environmental Engineering, Quality Management or related field

2) Min. 2 years experience in ISO 9001, ISO 14001, document control, engineering/EPCC company

3) Water & wastewatr industry and internal audit experience is an advantage

4) Good documentation & communication skills, good follow-up ability

5) Able to work independently, organized and detailed-orientated

Perks & Benefits

• Nearby public transport
• Regular team activities
• EPF & SOCSO

職位概述：

操作CNC工具機，同時進行偵測與維護。

職責：

• 每日、每月和每年對CNC工具機進行必要的預防性維護服務。
• 操作CNC工具機前，請更新每日維護檢查表。
• 依照每日計畫的CNC工具機運作情況進行操作，並直接向上級或計畫者確認與機器操作相關的任何疑問或問題。
• 每天使用前，請對所有設備進行檢查和必要的校準。
• 根據刀具清單設定CNC工具機，必要時使用其他刀具替代，並進行充分驗證。
• 在將材料坯料裝入數控機床之前，對其進行外觀和尺寸檢查。
• 依照目標計畫和CNC工具機運作比例操作CNC工具機，同時負責在不降低品質的前提下最大限度地提高產量，並最大限度地延長數控機床的運作時間。
• 對成品進行外觀和重要尺寸檢驗，如果是成品，則進行全面檢驗。
• 在進入下一節之前，如有必要，對成品進行分類、返工和重新切割。
• 負責工作區域的清潔、整齊、有序和系統化管理。
• 參與故障排除和改進活動。
• 根據上級或管理層的安排，履行其他職責。

能力：

• 能夠讀寫G程式碼和M程式碼。
• 能夠操作CNC工具機，或至少有CNC工具機的實際操作經驗。
• 具備幾何尺寸標註和公差系統的知識，或至少能夠看懂工程圖。
• 最低限度的監督和自我約束。

應徵者必須至少擁有機械工程/製造工程或同等專業的文憑。

職位描述

• 開發、維護和產生智慧範圍程序，用於檢驗、驗證生產材料的來料、出料、首件檢驗和在製品。
• 與品質保證團隊密切合作，測量、檢查和測試成型零件，以發現缺陷和不符合規格的情況。
• 管理和維護所有測量設備，以確保其功能正常並滿足生產需求。
• 準備並提交所需報告或文件，確保清楚標示產品檢驗狀態

資格：

• SPM/相關領域的文憑
• 能夠讀懂二維或立體圖紙
• 熟練測量設備（如內視鏡、遊標卡尺、高度規等）的使用是一項優勢。
• 良好的溝通能力，能夠與其他職能團隊進行有效溝通。
• 能夠團隊合作，也能獨立工作。
• 能夠適應快節奏的工作環境
• 良好的出勤率和準時上班

福利待遇

• 開放文化
• 個人發展機會

職位描述

• 開發、維護和產生智慧範圍程序，用於檢驗、驗證生產材料的來料、出料、首件檢驗和在製品。
• 與品質保證團隊密切合作，測量、檢查和測試成型零件，以發現缺陷和不符合規格的情況。
• 管理和維護所有測量設備，以確保其功能正常並滿足生產需求。
• 準備並提交所需報告或文件，確保清楚標示產品檢驗狀態

資格：

• SPM/相關領域的文憑
• 能夠讀懂二維或立體圖紙
• 熟練測量設備（如內視鏡、遊標卡尺、高度規等）的使用是一項優勢。
• 良好的溝通能力，能夠與其他職能團隊進行有效溝通。
• 能夠團隊合作，也能獨立工作。
• 能夠適應快節奏的工作環境
• 良好的出勤率和準時上班

福利待遇

• 開放文化
• 個人發展機會

1) Memahami keperluan dan kehendak pelanggan untuk membangunkan proses kawalan kualiti yang berkesan.

2) Peranti dan semak spesifikasi untuk produk atau proses.

3) Tetapkan keperluan bahan mentah atau produk perantaraan untuk pembekal dan pantau keperluan mereka

pematuhan.

4) Menyelia pemeriksa, juruteknik dan kakitangan lain serta memberikan panduan dan maklum balas.

5) Menyelia semua prosedur pembangunan produk untuk mengenal pasti penyimpangan daripada piawaian kualiti.

6) Luluskan produk yang betul atau tolak produk yang rosak.

7) Simpan dokumentasi yang tepat dan lakukan analisis statistik.

8) Untuk memastikan prosedur QMS berjalan dengan betul.

9) Menjawab isu kualiti daripada pelanggan.

10) Menjalankan dan memantau tugas/aktiviti kakitangan yang berkualiti.

11) Mengesahkan semua rekod pemeriksaan dokumen (IQC, IPQC, OQC)

12) Semakan untuk pelan penambahbaikan kualiti / penambahbaikan berterusan.

13) Untuk memastikan pengeluaran mesti mengikut WI dalam pengeluaran.

14) Menjalankan dan melatih pekerja bawahan untuk kemajuan kemahiran.

Faedah & Kebaikan

• Komisen dan bonus
• Elaun (upah perjalanan, pengangkutan, dll.)
• Kod pakaian kasual

1）了解客戶需求和要求，以製定有效的品質控制流程。

2) 產品或製程的設備和審查規範。

3）設定對供應商的原料或中間產品需求並監控其供應。

遵守。

4）監督檢查員、技術員和其他工作人員，並提供指導和回饋。

5）監督所有產品開發流程，以發現與品質標準的偏差。

6）核准合格產品或拒絕不合格產品。

7）保持準確的記錄並進行統計分析。

8）確保品質管理體系程式正確運作。

9）回應了顧客提出的品質問題。

10）進行和監督品質員工的職責/活動。

11）核對所有文件檢驗記錄（IQC、IPQC、OQC）

12) 品質改進計劃審查/持續改進。

13）確保生產必須遵循生產工作指導書。

14）指導和訓練下屬以提高技能。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 休閒著裝要求

1) Understand customer need and requirements to develop effective quality control process.

2) Devices and review specifications for products or processes.

3) Set requirement for raw material or intermediate products for suppliers and monitor their 

   compliance.

4) Supervise inspector, technician and others staff and provided guidance and feedback.

5) Oversee all product development procedures to identify deviations from quality standard.

6) Approve the right product or reject defectives.

7) Keep accurate documentation and perform statistical analysis.

8) To make sure QMS procedure run correctly.

9) Responded quality issue from customer.

10) Conduct and monitor quality staff duties / activities.

11) Verifies to all docs inspection records (IQC,IPQC,OQC)

12) Review for quality improvement plan / continues improvement.

13) To make sure production must follow WI in production.

14) Conduct and training subordinates for skill progress.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code

Job Overview :

Operate CNC machines while performing inspection along with taking care of the maintenance.

Responsibilities:

• Perform preventive maintenance services necessary of the CNC machine in daily, monthly and annually.
• Update the daily maintenance check sheet before operating the CNC machine.
• Follow the daily planned CNC machines, output and directly confirm with superior or planner for any enquiries or issues related to the machine operation.
• Perform inspection and calibration if any necessary to all equipment daily before usage.
• Setup CNC machine according to the tool list and use other tool substitute if necessary, with superior validation.
• Perform visual and dimension inspection to the material blank before load into CNC machine.
• Operate CNC machine in comply with target plan and CNC machine running ration while take responsibility to maximize output quantity without diminishing quality and maximize CNC machine running time.
• Perform visual and important dimension inspection to the finished goods either by full inspection if finished goods.
•  Perform sorting, rework and recut to the finished goods in necessary before proceeding to the next section.
•  Responsible to the working area in terms of cleanliness, tidiness, organized and systemic.
•  Involves in troubleshoot and improvement activities.
•  Perform other responsibilities as assigned by superior or management from time to time.

Competencies:

• Able to read and write G code and M code.
• Able to operate CNC machine or at least have experience on CNC machines hand on.
•   Have some knowledge about geometric dimensioning and tolerancing system or at least able to understand engineering drawings.
•  Minimum supervision and self-discipline.

Candidate must posses at least Diploma in Mechanical Engineering/Manufacturing Engineering or equivalent.

1. 5 Working days per weeks.
2. Yearly performance-based bonus.
3. Yearly performance-based increments.
4. Allowance (meal, attendant, transport * etc)
5. Medical insurance coverage.

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

Job Purpose

To operate and maintain all electrical and power-related system equipment installed in SMRT in compliance with our Quality objective as stated in our QP/WIs/Work Records.

Responsibilities

1. To plan, lead and oversee preventive maintenance and corrective maintenance works on electrical / power system related equipment to meet the Quality objective as stated in our QP and ensure all work in compliance with relevant procedures and safety requirement.
2. To ensure the performance of electrical / power system related equipment in revenue operations meet the performance targets through effective scheduling of PM programs and co-ordination of CM activities .
3. To plan and execute maintenance schedule and staff duty rosters in most effective and efficient manner.
4. To provide technical advice and instructions to subordinates including sub-contractor personnel and ensure all drawings, diagrams, manuals, task lists, WIs and work records are kept current and update.
5. To implement ISO procedure and carry out IPA/JSA & SSPP as assigned & planned.
6. To comply and exercise safety at all times in accordance to Safety Procedures.
7. To undertake any other tasks or functions that are incidental or ancillary to the performance of assigned work.
8. Manage appointed contractors for rectification works
9. To support other ad hoc basis projects as PM/PIC
10. To carry out any other ad-hoc tasks as assigned by Engineering Maintenance Manager / Engineer
11. To actively lead / participate in Kaizen Project to enhance and streamline maintenance processes and equipment performance
12. To mentor and provide guidance to newly promoted / joined AEs.
13. To cover EMM's duties when his supervisor is on leave.

Qualifications & Work Experience

• At least 3 to 5 years of relevant experience in maintenance and troubleshooting of electrical equipment.

Skills

• Self-motivated, always striving to improve or meet a standard of excellence.
• Able to lead by example.
• Able to communicate effectively and work in and as a team.

We regret that only shortlisted candidates will be notified.

You will lead and supervise a team of Technical Officers in performing both preventive maintenance and corrective maintenance on air-conditioning & mechanical ventilation system which consist of large water-cooled chillers, water pumps, cooling towers, air handling units, fan coil units, mechanical ventilation fans, etc. including tunnel ventilation system (tunnel ventilation and tunnel booster fans).

• Prepare and submit monthly work schedules. Ensure all monthly maintenance work orders are scheduled and carried out as planned and are closed promptly.
• Ensure that all works carried out comply strictly with the statutory Codes of Practices, approved work instruction /task list, in-house Work Safety Manual, Quality Procedures and Quality Assurance System etc.
• Review all maintenance records and certify the safety critical work order completion and to feedback any fault or abnormality and to take remedial action if required.
• Participate, review and update work instruction /task list to ensure that all latest requirements are met and to enhance productivity.
• Ensure that all reported faults are followed up.
• Coordinate and attend to interfacing works, testing, commissioning and taking over of newly installed Environmental Control System (ECS) equipment.
• Work closely with the Land Transport Authority (LTA) and their contractor to close all faults and defects registered during the equipment Defect Liability Period (DLP).
• Ensure that the maintenance key performance targets are met every month.
• Ensure safety in the workplace through close supervision and implementation of all safety requirements.

Requirements:

• A Diploma in Electrical Engineering, Mechanical Engineering, Mechatronics Engineering, Building Services Technology or Facilities Management. Candidate with NITEC/ Higher NITEC qualification but with more than 10 years of relevant experience will also be considered.
• Minimum 2-3 years of relevant post-graduate working experience in operation and maintenance of building facilities systems (air-conditioning & mechanical ventilation system, low voltage system, fire protection system and other related M&E equipment). Candidate with relevant experience in dealing with both air-con control system and minor electrical trouble-shooting work will have an added advantage.
• Candidate with more than 6 years of relevant experience will be given a senior post.
• Candidate must be prepared to work in 3 rotating shifts.
• Must be self-motivated, resourceful, organized, independent and possess strong interpersonal & communication skills.
• Ability to think logically and be a good team player.
• Class 3 License is a plus point.