Total 14,114 site engineer job vacancies

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic, other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will be commensurate with skill and experience

5 days' work week

Responsibilities

• Interpret electrical and ELV schematic diagrams to guide project execution and ensure technical accuracy.

• Coordinate and liaise with sub-contractors to facilitate smooth site work progress and timely issue resolution.

• Review contract specifications and prepare variation orders to align with project requirements and changes.

• Perform engineering design tasks including load and fault calculations to support project planning and safety.

• Diagnose and resolve technical issues during installation, commissioning, and testing phases to maintain project quality.

• Verify installation works comply with approved shop drawings, method statements, project specifications, and relevant standards.

• Participate in regular site meetings with clients and sub-contractors to discuss progress and collaboratively resolve site matters.

• Support Project, Site, and Construction Managers by monitoring project progress and assisting in project management activities.

Requirements:

• ITE/Diploma/Degree or equivalent in Electrical Engineering.

• Experience managing projects for industrial or commercial purposes.

• Experience in MRT projects is advantageous.

• Strong communication and interpersonal skills to effectively engage with diverse teams and stakeholders.

• Demonstrated problem-solving, coordination, and team collaboration skills.

Responsibilities:

• Oversee the full project cycle from start to handover ensuring timely completion, high quality standards and client satisfaction.
• Plan project schedules, manage timelines, budgets, documentation and ensure projects stay within scope and cost.
• Conduct regular site inspections to monitor progress, workmanship, quality control, and resolve site issues promptly.
• Act as the primary point of contact for clients, providing timely updates and responses to queries.
• Coordinate closely with designers, subcontractors, suppliers, and internal teams on design intent, materials, schedules, and workflow.
• Manage and supervise subcontractors; ensure clear scope of work and adherence to project requirements.
• Attend site meetings and liaise with relevant stakeholders to ensure smooth project execution.
• Review and interpret 2D drawings, technical specifications and assist in material selection and costing/negotiations with suppliers and subcontractors.
• Support the preparation of quotations, work schedules, material / moodboards and other project-related documents when required.
• Assist Sales Designers in the interior design scope.
• Provide regular updates to internal stakeholders and escalate critical issues when necessary.
• Participate in ad-hoc tasks or additional duties as assigned.

Requirements:

• Proven experience in managing interior design, renovation, or construction projects.
• Strong knowledge of Singapore's interior construction processes, materials, and vendor / subcontractor management.
• Ability to multitask and manage multiple ongoing projects under tight deadlines.
• Strong project coordination, site management and problem-solving skills.
• Detail-oriented, proactive, and able to work independently as well as collaboratively.
• Good interpersonal and communication skills to liaise with clients, subcontractors, and internal teams.
• Proficiency in English; Mandarin is an advantage (for liaising with directors, clients, and contractors).
• Possession of a personal vehicle is an added advantage.

Interested candidates, please WhatsApp us at https://wa.me/6581170774 or email us at reborninteriorsg@gmail.com. We will only notify you if you are shortlisted. Thank you.

About the Role

As a Senior Application Engineer / Application Engineer, you will provide technical expertise and application support, collaborating with customers and partners to deliver practical engineering solutions and drive Industry 4.0 initiatives from concept to commissioning.

Responsibilities

Technical Solutions & Application Engineering

• Develop and propose technical solutions tailored to customer requirements to address operational challenges
• Conduct feasibility studies and application assessments to validate solution viability
• Provide technical consultation and ongoing support to customers and internal teams for effective solution deployment
• Design and develop application solutions that deliver measurable value to customers
• Deliver proof-of-concept demonstrations to secure project opportunities and build customer confidence

Project Management & Implementation

• Manage engineering projects from initial planning through successful completion, ensuring alignment with customer needs
• Coordinate activities with system integrators, contractors, and project stakeholders to maintain project momentum
• Conduct testing, commissioning, acceptance testing, and system buy-offs to ensure quality and compliance
• Ensure projects are delivered on schedule and meet defined customer requirements
• Prepare and maintain comprehensive project documentation and technical reports for transparency and knowledge sharing

Product Development & Technical Support

• Perform product testing and troubleshoot technical issues to maintain product reliability
• Investigate technical problems and conduct root cause analysis to identify corrective actions
• Recommend and implement corrective and preventive measures to improve product performance
• Support warranty claims and product quality investigations to uphold customer satisfaction
• Provide technical feedback to manufacturers and principals to influence product improvements

Customer Engagement & Business Development

• Analyze customer operational challenges and anticipate future needs to tailor solutions
• Deliver technical presentations and product demonstrations to educate and engage customers
• Support sales teams by providing technical materials and application expertise to enhance sales effectiveness
• Gather market intelligence on competitors, industry trends, and emerging technologies to inform strategy
• Contribute to business growth by developing innovative solutions and fostering strong customer relationships

Training & Knowledge Sharing

• Conduct product and system training sessions for customers and internal stakeholders to build technical competence
• Share technical knowledge and best practices across teams to enhance collective expertise
• Mentor junior engineers and provide on-the-job guidance to support professional development

Requirements

Qualifications

• Minimum Diploma in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, Automation Engineering, or related disciplines.
• Fresh graduates are welcome to apply for Application Engineer positions.
• Candidates with 5 years or more relevant experience may be considered for Senior Engineer positions.

Technical Skills Competencies

• Knowledge of industrial control systems, automation technologies, and circuit analysis to support solution design
• Understanding of PLC programming and industrial communication systems for system integration
• Familiarity with Industry 4.0 technologies, IoT, AI, Cybersecurity, and Smart Manufacturing solutions to drive innovation
• Experience in system integration, troubleshooting, testing, and commissioning to ensure successful project delivery
• Ability to interpret technical specifications and customer requirements to develop effective solutions
• Involvement in implementing sustainability practices aligned with corporate sustainability strategy
• Programming knowledge in IEC61131 standards (LD, ST, FB, SFC) to enhance automation programming capabilities
• Experience in industrial automation projects and system integration to support complex implementations
• Technical presentation and customer engagement skills to effectively communicate solutions
• Risk management and project coordination experience to mitigate project risks and ensure smooth execution

Soft Skills Competencies

• Self-motivated and results-oriented.
• Innovative, creative, and proactive.
• Strong teamwork and collaboration skills.
• Excellent communication and interpersonal skills.
• Customer-focused mindset with strong business acumen.
• Ability to work under pressure and manage multiple priorities.
• Strong analytical and problem-solving abilities to resolve technical challenges

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

·        Coordination with own team to support whenarising issues on site.

·        To Assist with project Manager formeeting, schedule, and progress report

·         Conduct regular meetings with clients toensure clarification and meet specific requirements in a timely manner.

·        Delegate tasks to team members accordingto their individual skill sets, experience, and abilities to ensure efficientcompletion of the project.

·        Maintain budgets and adjust according toneeds as they arise.

·        Track performance and analyse thecompletion of key goals.

·        Document and report project progress tostakeholders and clients.

·        Problem solving skills with for to managethe pressurised situations.

·        To have a Driving license is additionalsupport for the job needs.

·        Coordination and good communication withour own team for project support and sharing experience.

We are hiring 1 Year Senior Site Specialist, Robot Specialist to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Responsibilities

• Completing and reviewing work assignments and adjusting workload and resources periodically with the team.

• Mentoring and cross-training staff with a standardized training program and documentation.

• Implementing required quality management systems to ensure customer work scope, results, and team performance meet approved SOPs and organization's safety and quality requirements.

• Participating in cost, quality, and efficiency improvement initiatives driven by the Team Lead.

• Coordinating and ensuring timely calibration of laboratory equipment.

• Maintaining good laboratory housekeeping with the team.

• Perfume compounding and material selection as per formulation.

• Updating compounding information in the Electronic Lab Notebook.

• Ensuring clean tools are used for weighing.

• Preparation for odor evaluations.

• Maintaining End-to-End (E2E) service of material management.

• Supporting the shipping of compounded materials with complete shipping documents.

• Operating and maintaining the Contexa robot.

Requirements:

• Diploma in Applied Chemistry/Perfumery and Cosmetic Sciences/Chemical Engineering.

• Minimum of 1-2 years of relevant working experience in a chemistry laboratory environment (preferred).

• Knowledge of "good laboratory practices" quality guidelines and regulations (cGMP).

• Good interpersonal and coordination skills to multi-task and meet deadlines.

• Independence, self-motivation, and adaptability in a multifaceted environment.

• Strong technical knowledge and hands-on demeanor with excellent problem-solving skills.

• Excellent written and oral communication skills.

• Mechanical experience with laboratory robots and good computational skills (desirable).

All Interested candidates are invited to email your resume in MS Word format to:

healthcare8@recruitexpress.com.sg

Please include your full working experience, education background, notice period, expected salary.

Trista Theseira

Outsourcing Team

Ref Code: #HGNT

Recruit Express Pte Ltd

Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

A Site Engineer will manage part of a construction project, they also help with technical advice and supervise other members of staff. The work can be varied as projects can range from working on a large-scale housing estate to building a new shopping complex. Site engineers should understand the different needs projects have.

- managing parts of construction projects

- overseeing building work

- undertaking surveys

- setting out sites and organising facilities

- ensuring projects meet agreed specifications, budgets or timescales

Our client is a well-established A1 main contractor known for its strong track record in delivering high-profile mixed-use, commercial, residential, and large-scale building projects across Singapore. With a robust pipeline of upcoming developments, including iconic projects, they are actively seeking to hire multiple Project Engineers/Senior Project/Site Engineers at an exciting phase of their growth.

There are opportunities for both building and infrastructure projects islandwide.

What you will do

• Support the Project Manager in planning, coordinating, and executing on-site project activities.
• Attend site meetings, inspections, and monitoring sessions, providing updates on work progress.
• Work closely with architects, consultants, and stakeholders to ensure adherence to technical drawings and specifications.
• Oversee daily construction operations and ensure compliance with health, safety, and regulatory requirements.
• Coordinate site logistics, including material deliveries and equipment allocation, to maintain efficient workflow.
• Assist in tracking project budgets and monitoring cost-related matters.
• Help resolve site issues or delays by proposing practical corrective actions.
• Supervise subcontractors to ensure productivity, workmanship quality, and compliance with project requirements.

What you will need

• Degree/diploma in Civil Engineering, Construction Management, or related field
• Minimum 3 years of relevant experience as site/project engineer
• Candidate with more experience can be considered for the Senior position

Location: South

Interested candidates kindly forward your CV to yiling.tan@peoplesearch.jobs (Tan Yi Ling, Reg No: R21103172). You may share this opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Civil and RC Structural Works Site Supervisor / engineer cum QS:

Job Description

We are looking for an individual with great Civil/RC Structural experience for the position of Site Supervisor cum QS for our daily onsite operations. The candidate will work directly under the construction and project manager, managing clients, workers and all other stakeholders throughout the construction phase of various RC structural works.

Reporting to the Construction and Project Managers, the candidate will be responsible for constructing, managing and coordinating site-related works with the client, RE/RTO, and the workers to perform the RC work in the strictest compliance with the drawing, specification and contract documents. This role is focused on working in the field, managing our own workers, read and understand drawings, plan works, progress, materials and machinery, and will report directly to the Construction and project Manager. This candidate should understand all aspects of RC structural construction in relation to executing work on-site.

It is expected that the candidate will be detail-oriented and can manage and communicate with workers very well. There will be a significant amount of “hands-on” works, reading and understanding the RC structural drawings, guiding the workers on construction, coordinating with contractors in the field while installing all aspects of the project RC structural works. The candidate must have robust EQ skills and be able to relate to and communicate with the client, the workers, the managers, the RE/RTO, and subcontractors etc. of all tiers and vendors and immediately establish trust and confidence in his/her ability.

Responsibilities:

• Represent the Company in the utmost professional manner while constantly embracing honesty, integrity, and truth
• Directly guiding and managing workers in executing the construction works
• Reading, understanding the RC structural drawings very well, be able to produce bar bending schedule (BBS), plan and arrange manpower and various materials, be able to levelling and setting out the works
• Comply with the various requirements of the company
• Develop a comprehensive understanding of the contract documents (drawings and specifications), phasing plans, structural systems interrelationships, construction sequencing, and project schedule
• Attend daily job site safety meetings and perform weekly project safety audits
• Work with the project safety team to ensure all works are being carried out to the highest levels of safety
• Coordinate with on-site Resident Technical Officers (RTOs) and Resident Engineers( REs) for all required inspections and work verification
• Develop look-ahead schedules and assist the Construction managers in long range planning
• Facilitate problem solving, as may arise, between structural, architectural, mechanical, electrical and various contractors during construction
• Work closely with the project and construction Managers to lead logistics of all works and materials
• Working knowledge of structural systems and how precast, in-situ and structural steel are sequenced in a building and construction project
• Log and post all civil and structural changes and as-built information on field drawings.
• Ensure all information is current and communicated with the project team
• Liaise with the client, supervisory engineers, inspectors and relevant staff
• Knowledge and ability to use AutoCAD to produce construction/ shop drawings when necessary
• Ensure that all work done are adhere to relevant quality documentation/records

Qualifications

• Must possess BCSS certificate
• Independently produce method statement and risk assessment etc. documents
• Civil/Structural construction engineer / supervisor or foreman background with basic quantity surveying knowledge. Good at RC structural works, rebar schedudling, formworks fabrication and installation
• 5+ years of Civil/RC Structural site supervisor experiences with hands on ability to teach workers
• Experience in building temporary civil, drainage, earthworks, RC structural works, site office, laydown area etc.
• Structural or civil and engineering working knowledge of plans, engineering drawings, BBS, specifications and schematics associated with the reinforced concrete structural trades for permanent works or temporary onsite facilities
• Computer literacy. Significant experience with Excel, Word, AutoCAD, and other computer based tools
• Strong leadership and excellent communication and organizational skills in managing workers and various stakeholders

Grow. Listen. Check your ego at the door. Be humble. Build lasting impressions.

We regret that only shortlisted candidates will be notified. Thank you for applying.

Key Responsibilities

Site Reliability & Operations

• Manage and improve the reliability, availability, and operational excellence of the SHIP-HATS platform
• Define, monitor, and maintain Service Level Objectives (SLOs) and Service Level Indicators (SLIs)
• Lead incident management, troubleshooting, root cause analysis, and post-mortem reviews
• Drive continuous improvements to reduce operational toil and prevent recurring incidents
• Perform capacity planning, performance tuning, and system optimisation

Observability & Monitoring

• Design and implement observability solutions across logging, metrics, and distributed tracing
• Build dashboards, alerts, and monitoring strategies to provide deep visibility into platform health
• Manage and maintain monitoring stacks such as Prometheus, Grafana, ELK, or equivalent tools

Infrastructure & Automation

• Develop and maintain Infrastructure-as-Code (IaC) solutions using tools such as Terraform or Ansible
• Automate infrastructure provisioning, deployment, and operational workflows
• Support both cloud and on-premises infrastructure environments
• Contribute to CI/CD pipeline improvements and platform automation initiatives

Collaboration & Engineering Excellence

• Work closely with engineering and product teams to embed reliability and operability practices into the software development lifecycle
• Review system architectures and recommend reliability, scalability, and resilience improvements
• Advocate for DevSecOps, automation, and operational best practices across teams

Requirements

• Degree in Computer Science, Information Technology, Engineering, or related disciplines
• Hands-on experience with Kubernetes and container orchestration platforms
• Experience with CI/CD and DevSecOps tools such as GitLab, Jira, Confluence, Fortify, or similar platforms
• Proficiency in at least one scripting or programming language such as Python, Go, or Bash
• Experience with Infrastructure-as-Code tools such as Terraform or Ansible
• Familiarity with cloud platforms such as AWS, Azure, or GCP
• Experience implementing and managing observability and monitoring solutions such as ELK Stack, Prometheus, or Grafana
• Good understanding of networking, system reliability, security hardening, and operational best practices
• Strong analytical, troubleshooting, and problem-solving skills
• Ability to work effectively in Agile and cross-functional environments
• Good communication and stakeholder management skills

Good to Have

• Experience with GitOps workflows and service mesh technologies such as Istio
• Familiarity with secrets management tools such as HashiCorp Vault
• Exposure to government ICT standards, IM8 policies, or regulated environments
• AI-native mindset and software engineering capabilities
• Experience supporting large-scale enterprise or public sector platforms

Responsibilities

• Supervise and coordinate civil engineering works at project sites.
• Monitor site progress and ensure projects are completed according to schedule and specifications.
• Coordinate with subcontractors, supervisors, and project stakeholders.
• Conduct site inspections and ensure compliance with safety, quality, and regulatory requirements.
• Prepare site reports, project documentation, and progress updates.
• Support infrastructure works including trenching, excavation, cable laying, and road reinstatement activities.

Requirements

• Diploma or Degree in Civil Engineering or a related discipline.
• Training and guidance will be provided to support successful candidates in their role.
• Relevant experience in construction, infrastructure, or utility projects will be an advantage.
• Able to work in a site-based and outdoor environment.
• Willing to work flexible hours, including night shifts when required by project schedules.
• Good communication, coordination, and problem-solving skills.

Benefits

• Competitive remuneration package.
• Career development and training opportunities.
• Exposure to large-scale infrastructure projects across Singapore.

Interested candidates, please send your updated resume in MS Word format to candy.lim@peopleprofilers.com.

All applications will be treated with the strictest confidence.

People Profilers Pte Ltd
DID: 6950 9738
EA Licence No.: 02C4944
EA Registration No.: R1109829

We’re seeking a skilled and driven Automation Engineer (Robotics) to design, develop, implement, and maintain automation solutions that streamline processes, boost efficiency, and enhance product quality.

Key Responsibilities

• Design, maintain, and enhance automation frameworks for software, hardware testing, and process optimization.
• Collaborate with teams to gather requirements and deliver tailored automation solutions.
• Develop efficient scripts, test cases, and reusable documentation for automation tasks.
• Identify and implement opportunities to enhance operational efficiency.
• Troubleshoot and upgrade existing automation systems to ensure optimal performance.
• Stay informed on emerging technologies and integrate innovative practices.
• Provide training and technical support on automation tools and processes.
• Document workflows, test cases, and results for auditing and reference.
• Coordinate project timelines and stakeholder meetings for seamless delivery.

Qualifications:

• Experience: 4–7 years in automation engineering, with a focus on robotics and process automation, AGV/AMR, Automated storage systems.
• Technical Skills: Proficiency in Linux, VBA, and other relevant programming languages.
• Development Practices: Knowledge of CI/CD pipelines and tools.
• Problem-Solving: Strong analytical skills with keen attention to detail.
• Communication: Excellent verbal and written communication, with the ability to work collaboratively in cross-functional teams.
• Certifications: Certification in automation or related fields is advantageous.
• Industry Background: Experience in semicon, logistics or manufacturing is a plus.

We regret to inform that only shortlisted candidates will be notified / contacted.

EA Registration No.: R26159738, Jewel Ten

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

Monthly Salary Range (SGD): $3,000 - 5,500

About the Role

We are partnering with an established precision engineering and contract manufacturing company to hire a Sales Engineer. This role is ideal for candidates with a technical engineering background who enjoy building customer relationships, driving business growth, and working closely with manufacturing and engineering teams.

You will be responsible for managing existing customer accounts while developing new business opportunities within the machining and contract manufacturing industry.

Key Responsibilities

• Manage and grow assigned customer accounts while identifying new business opportunities.
• Achieve sales targets through proactive customer engagement and business development.
• Prepare quotations and actively follow up to secure purchase orders.
• Develop strategic relationships with existing and prospective customers.
• Coordinate closely with Engineering, Production, Supply Chain, Quality, and other internal departments on customer enquiries and RFQs.
• Review order fulfilment and support smooth sales operations.
• Monitor customer forecasts, pricing, and order schedules.
• Conduct regular customer meetings to review project status and resolve commercial issues.
• Understand customer drawings, Bill of Materials (BOM), and manufacturing requirements.
• Recommend suitable manufacturing solutions based on customer applications.
• Promote the company's machining and contract manufacturing capabilities to generate new business.
• Maintain high levels of customer satisfaction through responsive support and relationship management.

Requirements

• Diploma or Degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline.
• Minimum 1 year of experience in Sales Engineering, Technical Sales, Business Development, or Account Management within manufacturing.
• Experience in precision engineering, machining, CNC machining, metal fabrication, contract manufacturing, or related industries is advantageous.
• Strong communication and relationship management skills.
• Comfortable working with engineering drawings, BOMs, quotations, and RFQs.
• Good organisational and problem-solving abilities.
• Proficient in Microsoft Office.
• Able to work independently while collaborating across cross-functional teams.
• Willing to support customers across different time zones when required.

Why Join?

• Opportunity to work with leading manufacturing customers
• Strong career progression opportunities
• Exposure to technically challenging projects
• Collaborative and supportive working environment
• Stable and growing precision engineering business

Skills

Sales Engineering • Technical Sales • Business Development • Account Management • Precision Engineering • CNC Machining • Contract Manufacturing • RFQ • Quotations • Customer Relationship Management • Mechanical Engineering • Manufacturing Engineering • BOM • Industrial Sales • Project Coordination