Total 2,963 Senior Executive construction engineer job vacancies

THE ROLE:

DFT engineer will lead strong engineering team on Scan, MBIST, iJTAG test development of latest AMD products. The IPs range from complex processors, AI computation blocks, to state-of-the-art controller IPs which provide automotive, data center, machine learning and high-speed communication solutions. You will work closely with designers to make sure DFT structures are correctly implemented, with test engineers to make sure ATE test programs can be generated from the DFT (ATPG, MBIST) tools, with product engineers to make sure scan/MBIST production test can run seamlessly and stable, and with yield engineers to debug and root-cause failures/defects. You will get the opportunity to expand technical knowledge beyond DFT into embedded processor firmware, complex chip simulation, RTL implementation for ASIC & FPGA and deep silicon debug works all the way to high-volume production requirement. This is the role to oversee complete silicon cycle from design to production phases.

THE PERSON:

We are looking for candidates that can communicate complex engineering subjects effectively to cross functioning technical teams and upper management. Strong DFT and leadership skills will be put to good use. Successful Member of Technical Staff DFT engineer will interact with many external teams and must confidently represent his/her organization.

KEY RESPONSIBILITIES:

• Manage DFT engineers resolving technical challenges and meeting product schedule
• The role is in AMD global quality and operation organization driving best manufacturing test solution through pre and post silicon activities
• Work closely with design teams and make sure DFT structures are correctly implemented.
• Responsible for developing, implementing and verifying DFT schemes on hard-IPs in AMD ASIC and FPGA products.
• Responsible for developing and implementing techniques to test digital logic, using Scan Compression, Stuck-at, Transition and Path-Delay fault models
• Responsible for testing other parts of the design, including memory, mixed-signal, I/Os, custom LBISTs & MBISTs, IEEE1149.1 JTAG and IEEE1687 IJTAG
• Responsible to develop Firmware driven cost-effective test strategies/methodologies with built-in diagnosis capability to enable efficient debugging and fault isolation on bench/ATE
• Collaborate closely with the New Product Introduction and Test/Product teams to ensure timely delivery of robust test patterns, and manage debugging of pattern issues on bench/ATE to root cause the problem
• Assist in Diagnosis and Yield enhancement through product lifecycle
• Develop an adaptive and cohesive team to take up any challenging tasks entrusted by management

PREFERRED EXPERIENCE:

• Experience DFT engineering experience through DFT pre and post silicon cycles
• Experience in creating and implementing complex chip-level DFT architecture
• Experience in DFT implementation including Scan and Scan Compression at IP and SoC level
• Experience with DFT tools, ATPG (Stuck-At, At-Speed, Path-Delay) and scan compression.
• Strong MBIST knowledge
• Knowledge of Tessent Streaming Scan Network SSN and hand-on experience is a big plus
• Proficient in logic design using Verilog and experience in synthesis and STA
• Experience in developing test benches and simulation in RTL/GATE/SDF environments
• Knowledge of FPGA synthesis and design flow is a plus
• Experience with post-silicon debug and bench equipment (e.g., oscilloscope and logic analyser)
• Good communication skills, works well in a group environment that spans across continents
• Comfortable in Linux environment and writing/using scripting languages such as Perl, Tcl, etc

ACADEMIC CREDENTIALS:

• MS or Ph.D. in Electrical/Electronic/Computer Engineering

Job Responsibilities

• Lead the Extra-Low Voltage systems design on assigned large scale projects during the tender, design, procurement, construction, commissioning until finale client acceptance phase
• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of Lead Engineer, if necessary
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit, Gas Detection and Fire Alarm systems with the support of a Lead Engineer if necessary
• Design of Information Technology cabling System with the support of a Lead Engineer if necessary
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of Lead Engineer if necessary
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design
• Technical Evaluation of vendor submission including approval of shop drawings
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems
• Guiding ELV engineers / Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic

Job Requirements

• Degree in Instrumentation and Controls Engineering 
• At least 8 years of experience in design and construction
• Experience in design, installation, programming, commissioning of Process and Building control systems
• Experience in design, selection, installation, commissioning of Instrumentation for Process and Building control systems   
• Experience in Extra Low Voltage Systems such as Fire Alarm, Security systems, IT data network
• Experience in Advanced Technology Facilities, Life Science & Chemicals, Energy & Environment Technologies, High Tech Infrastructure, Process Automation, Products and Services
• Experience in construction management

About Company

Founded in 2022, XG Tech is driving the future of smart vehicles. Its mission is to empower the digital transformation of automobiles, moving from distributed computing to a centralized, cross-domain platform.

XG Tech focuses on the intelligent cockpit—the next frontier of differentiation—while seamlessly integrating advanced driving systems. By reimagining cars as mobile living spaces, XG Tech aligns with the evolving trend of vehicles becoming the “third living space.”

Role Summary

As a Senior Agent Researcher, you will design and build evaluation-driven Agent and multi-agent systems for complex real-world applications. You will focus not just on making Agents work, but on understanding, measuring, and continuously improving their behavior, combining research depth with strong engineering execution in an AI-native development environment.

Key Responsibilities

• Build and evolve evaluation-driven Agent systems, using evaluation as the core mechanism for behavior improvement and iteration
• Design Agent architectures that are observable, maintainable, and optimizable under real-world constraints
• Develop scalable evaluation infrastructure, including automated testing, benchmarking, and experimentation frameworks
• Optimize Agent performance across architecture, model selection, context management, memory, and tool usage, balancing performance and cost
• Rapidly prototype Agent systems and demos, integrating research insights with engineering and product validation
• Continuously explore and apply advancements in LLMs, multimodal models, multi-agent systems, and context engineering

How You Will Stand Out

• Proven experience designing, building, or deploying Agent systems, LLM-based applications, or complex AI systems in production environments
• Strong understanding of AI/ML fundamentals and system design, including models, inference, training, context, and evaluation
• Hands-on experience with Agent evaluation frameworks, automated experimentation, or A/B testing
• Ability to translate cutting-edge research (LLMs, MLLMs, multi-agent systems) into practical, production-ready solutions
• Strong systems thinking with a research-oriented mindset and solid engineering execution
• Publications, open-source contributions, or experience in automotive, chip, or intelligent cockpit systems are advantageous

XG Tech is committed to providing equal employment opportunities by country, state, and local laws. XG Tech does not discriminate against employees or applicants based on conditions such as race, color, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

Key Responsibilities:

• Technical Ownership: Lead the end-to-end delivery of complex features, ensuring that technical designs are robust, scalable, and aligned with long-term goals.
• Engineering Excellence: Drive the adoption of high-quality engineering standards, ensuring that software systems are maintainable, secure, and reusable.
• Design & Implementation: Take an active role in architectural discussions and squad-level technical decisions, advocating for best practices in modern software development.
• Strategic Influence: Help shape the technical direction of digital initiatives to maximize their impact on the public good.
• Culture Building: Establish and refine engineering practices and tools that foster a strong, effective, and collaborative engineering culture.
• Stakeholder & Dependency Management: Independently navigate work-related dependencies and communicate technical concepts effectively to both senior leads and legal domain experts.
• Roadmapping: Collaborate with leadership to define and update technical plans and infrastructure roadmaps to meet future organizational needs.

What We Are Looking For:

Technical Requirements

• Professional Experience: * At least 7 years of professional experience in software engineering.
• Proven track record of building and maintaining large-scale, high-availability software systems.
• (Good to have) Experience in public sector, legal, or highly regulated environments is advantageous.
• Full-Stack Expertise: Deep experience in modern full-stack web application architecture and development.
• Tech Stack: Proficiency in JavaScript Typescript frontend development and TypeScript/Python for AI related back-end development.
• GenAI Development: Hands-on experience in Generative AI (GenAI) development, including working with Large Language Models (LLMs), RAG patterns, and building AI-driven features.

Infrastructure & Cloud:

• Strong hands-on experience working with Amazon Web Services (AWS) infrastructure.
• Proficiency in Infrastructure as Code (IaC) using Terraform.

DevOps:

• Experience designing and maintaining CI/CD pipelines exclusively using GitLab CI within the SHIP-HATS ecosystem.

Leadership & Soft Skills

• Strong Communication: Able to hold your own in conversations with legal professionals, product owners, vendors, and senior leadership. You can present complex findings clearly to non-technical audiences.
• Technical Maturity: A strong sense of ownership and the ability to navigate a professional, high-stakes organizational environment.
• Comfort with Ambiguity: You create structure where none exists and drive progress without waiting for perfect conditions or complete information.
• Mentorship: A collaborative mindset with a passion for coaching junior members and sharing knowledge with the wider team.
• Mission-Driven: A genuine commitment to the public good and an interest in the legal and justice sector.
• Craftsmanship: An uncompromising focus on engineering excellence, performance, and clean, well-documented code.

Key Responsibilities:

• Technical Ownership: Lead the end-to-end delivery of complex features, ensuring that technical designs are robust, scalable, and aligned with long-term goals.
• Engineering Excellence: Drive the adoption of high-quality engineering standards, ensuring that software systems are maintainable, secure, and reusable.
• Design & Implementation: Take an active role in architectural discussions and squad-level technical decisions, advocating for best practices in modern software development.
• Strategic Influence: Help shape the technical direction of digital initiatives to maximize their impact on the public good.
• Culture Building: Establish and refine engineering practices and tools that foster a strong, effective, and collaborative engineering culture.
• Stakeholder & Dependency Management: Independently navigate work-related dependencies and communicate technical concepts effectively to both senior leads and legal domain experts.
• Roadmapping: Collaborate with leadership to define and update technical plans and infrastructure roadmaps to meet future organizational needs.

What We Are Looking For:

Technical Requirements

• Professional Experience: * At least 7 years of professional experience in software engineering.
• Proven track record of building and maintaining large-scale, high-availability software systems.
• (Good to have) Experience in public sector, legal, or highly regulated environments is advantageous.
• Full-Stack Expertise: Deep experience in modern full-stack web application architecture and development.
• Tech Stack: Proficiency in JavaScript Typescript frontend development and TypeScript/Python for AI related back-end development.
• GenAI Development: Hands-on experience in Generative AI (GenAI) development, including working with Large Language Models (LLMs), RAG patterns, and building AI-driven features.

Infrastructure & Cloud:

• Strong hands-on experience working with Amazon Web Services (AWS) infrastructure.
• Proficiency in Infrastructure as Code (IaC) using Terraform.

DevOps:

• Experience designing and maintaining CI/CD pipelines exclusively using GitLab CI within the SHIP-HATS ecosystem.

Leadership & Soft Skills

• Strong Communication: Able to hold your own in conversations with legal professionals, product owners, vendors, and senior leadership. You can present complex findings clearly to non-technical audiences.
• Technical Maturity: A strong sense of ownership and the ability to navigate a professional, high-stakes organizational environment.
• Comfort with Ambiguity: You create structure where none exists and drive progress without waiting for perfect conditions or complete information.
• Mentorship: A collaborative mindset with a passion for coaching junior members and sharing knowledge with the wider team.
• Mission-Driven: A genuine commitment to the public good and an interest in the legal and justice sector.
• Craftsmanship: An uncompromising focus on engineering excellence, performance, and clean, well-documented code.

• Competent in preparing Bills of Quantities.
• Competent in reading and understanding drawings and perform measurements.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing all tender activities necessary for the procurement of new projects
• Oversee the submission of Main Contract progress claims, variation claims, and EOT claims.
• Preparation and negotiation of subcontract agreements and final accounts.
• Resolve contractual disputes with consultants, subcontractors, and suppliers.

Job Requirements :

• Degree in Quantity Surveying, Construction Management, Civil Engineering, or a related field.
• Minimum 5 years of experience as a Quantity Surveyor in the construction industry in Singapore.
• Advanced knowledge of construction estimating methods, cost control principles, and procurement processes.

Good Pay + Good allowance + Good Bonus

• Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Mon to Sat / 8am - 6pm
At least 25years experiences in Construction

Job Description

• Lead design and integration of fire protection systems with ACMV and M&E services
• Prepare hydraulic calculations, technical drawings, and system schematics
• Ensure designs comply with Singapore standards (SS CP 52, SS 575, SS 553, NFPA, FM Global)
• Coordinate fire protection systems with electrical, plumbing, and structural disciplines
• Ensure compliance with SCDF, Fire Safety Act, and BCA regulations
• Prepare and submit fire safety plans and authority documentation
• Liaise with QPs, RIs, and SCDF officers for approvals and inspections
• Oversee fire protection projects from design to completion
• Review shop drawings, material submissions, and method statements
• Monitor project progress, budget, and timelines
• Conduct risk assessments and resolve technical/site issues
• Lead testing, inspection, and commissioning of fire protection systems
• Coordinate integration with ACMV systems (e.g., smoke control, pressurisation)
• Ensure proper documentation and handover for Fire Safety Certificate (FSC)
• Mentor junior engineers and provide technical guidance and training

Requirements

• Bachelor’s Degree in Mechanical Engineering, Fire Safety Engineering, or related field
• 5–8 years of relevant experience in fire protection within M&E/construction industry in Singapore
• Strong knowledge of fire codes (SCDF, BCA, NFPA, FM Global)
• Proficient in AutoCAD, Revit/BIM, and hydraulic calculation tools
• Experience in ACMV smoke control and fire system integration
• Strong leadership, communication, and project management skills

As part of the Thermo Fisher Scientific team, you’ll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner, and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world’s toughest challenges, such as protecting the environment, ensuring our food is safe, and finding cures for cancer.

DESCRIPTION:

Senior Engineer - Utilities

The incumbent will provide direction and supervision to support utilities system maintenance and operation in compliance with cGMP, EHS, Data Integrity, and regulatory requirements for the Sterile manufacturing site

Responsibilities

• Responsible for the operation and maintenance of utilities and facilities systems, but not limited to WFI, RO, HVAC, chiller, boiler, air compressor, and nitrogen systems

• Work closely with the validation team to complete the qualification and re-qualification of the facilities and utilities systems

• Draft and prepare maintenance and operation SOP and PM plan for facilities and utilities systems

• Responsible for utilities and facilities systems-related changes and deviation management

• Cooperate with the internal and external audit team

• Responsible for utilities and facilities system-related small CAPEX project execution in the future

• Responsible for the utilities and facilities shutdown plan and execution

• Review as-built drawings and engineering technical data, and performance data for the facilities and utilities system

• Support a third-party vendor who is contracted to perform routine inspection, preventive maintenance, corrective maintenance, and any other maintenance-related activity

• Support the maintenance KPI based on the site engineering and quality requirements for utilities and facilities

• Complete all routine maintenance works as scheduled and in compliance with Engineering standards and safety procedures

• All GMP documentation related to maintenance activities is completed accurately and processed to full completion in compliance with data integrity requirements

• Ensure compliance with cGMP, regulatory requirements, and the company Quality Management System (QMS) for all utilities and facilities activities

• Participate in deviation investigation, root cause analysis, and implementation of effective CAPA for utilities and facilities systems

• Support risk assessments (e.g., FMEA) related to facilities and utilities to ensure product quality and patient safety

• Ensure all documentation (SOPs, logbooks, reports) aligns with data integrity principles (ALCOA+) and quality standards

• Support change control processes by assessing the quality and regulatory impact of proposed changes

• Collaborate with Quality Assurance (QA) to ensure readiness for audits and inspections

• Monitor and trend utilities performance data to identify quality risks and drive continuous improvement

• Ensure vendors and contractors comply with site quality requirements and GMP standards

• Participate in periodic quality review meetings and contribute to continuous improvement initiatives

• Carry out any other duties and responsibilities as assigned by the line manager, including but not limited to the above

Minimum Requirements/Qualifications

Education:

• University degree in engineering

Experience:

• 6 to 8 years of proven experience in maintenance of utilities and facilities systems, and related validation/GMP issues

• Has working experience in using the Building Management System and the Environmental Monitoring System

• Understanding of electrical standards, local requirements, and general electrical safety best practices

• SAP/CMMS experience is an advantage

Competencies:

• Able to work in a fast-paced and regulated environment

• Able to plan, schedule, organize, prioritize, and coordinate project activity

• Strong understanding of facilities systems related validation / GMP requirements

• Strong troubleshooting skills and a good knowledge of different RCA tools

• Able to work independently and perform machine maintenance work

• Possess a degree in Computer Science/Information Technology or related fields.
• Min 8 years of relevant working experience in software or data engineering with proficiency in Python.
• Strong experience in unit and integration testing.
• Familiarity with DevOps practices and Agile methodologies.
• Strong software engineering, analytical and problem-solving skills.
• Good team player and communication skill.
• CAT-1 cleared/eligible candidate is required for this role.
• Experience in AWS and Kubernetes (K8s)
• Familiarity with data platforms such as Snowflake, Apache Spark, or Apache Hive, as well as orchestration tools like Apache Airflow, Dagster, or Prefect.
• Familiarity with GitHub workflows and Datadog.
• Develop and maintain data pipelines and ETL/ELT processes, and ensuring maintainability through unit and integration testing.
• Collaborate with data teams to understand requirements and automate deployment and monitoring.
• Optimize data storage and troubleshoot issues to enhance performance.

About Us

A career at Hitachi Rail will help create a legacy. With operations in every corner of the world, our work goes to the cutting-edge of digital transformation and technology. From the multi-cultural strength of our global organisation to the sustainable and innovative ways we work to bring people together, there’s something for everyone to get stuck into. And that’s where you come in.

Singapore, Singapore (Hybrid)

As Hitachi Rail Singapore, we are advancing rail signalling and safety solutions to ensure safe and efficient railway operations worldwide.

Our technologies help to bring billions of people reliably to their destinations by rail every year – making sustainable mobility a reality.

Signalling Design Engineer - Senior (Ref. No. R1012094)

at our location in Singapore

The Signalling Design Engineer performs hardware engineering activities required to develop and deliver a solution or product to an end customer.

He/she will be involved in:

• Design Documentation Updates
• Interfacing with subcontractors/customer
• Analyzing site and in-house issues and determining solutions
• Participating in technical reviews and customer technical meetings

This Signalling Design Engineer is member of the Engineering team, reports to Signalling Design Manager.

The Signalling Design Engineer collaborates with his/her peers including Project Design Authority, Project Managers, Procurement, Supply Chain, Installation and T&C Engineers.

This role will be involved with complex and difficult designs following established system engineering process 

• Transportation Project  ( Mainline , MRT, LRT )  
• Large projects requiring multiple international entities. 
• Understand Customer needs: operation, safety and maintenance
• Deliver on time and within budget

You will enjoy having these responsibilities:

• Translate Customer requirements into conceptual designs and prepare associated documentation by performing operational analyses, simulations and technical trade-off studies identifying alternative design configurations and functional features.
• Prepare, update, and review interface schematics, wiring diagrams, mechanical drawings, block diagrams, I/O bitmaps, track scheme plans, cable routing designs, bill of materials, and other analysis required for design of signalling systems
• Support interface with other system wide contractors (eg. Platform Screen Doors, Civil, Trackworks, Comms, power, etc.) and write Interface Control Documents
• Prepare and review test procedures and support investigation of systems/sub-system issues raised during testing or during revenue service.
• Ensure safety is built into the design at each step.
• Supported by the Project Design Authority, deliver technical presentations to internal and external engineering/management groups in clear, complete, concise and non-ambiguous terms.
• Support technical proposals based on knowledge of past projects, customer requirements and signalling design principles.
• Support site activities such as surveys and investigations if the need for experts arises.
• Opportunity exists to support and learn about other hardware design domains within Hitachi Rail including trainborne, mechanical, networking, and power.

You have:

• Translate Customer requirements into conceptual designs and prepare associated documentation by performing operational analyses, simulations and technical trade-off studies identifying alternative design configurations and functional features.
• Prepare, update, and review interface schematics, wiring diagrams, mechanical drawings, block diagrams, I/O bitmaps, track scheme plans, cable routing designs, bill of materials, and other analysis required for design of signalling systems
• Support interface with other system wide contractors (eg. Platform Screen Doors, Civil, Trackworks, Comms, power, etc.) and write Interface Control Documents
• Prepare and review test procedures and support investigation of systems/sub-system issues raised during testing or during revenue service.
• Ensure safety is built into the design at each step.
• Supported by the Project Design Authority, deliver technical presentations to internal and external engineering/management groups in clear, complete, concise and non-ambiguous terms.
• Support technical proposals based on knowledge of past projects, customer requirements and signalling design principles.
• Support site activities such as surveys and investigations if the need for experts arises.
• Opportunity exists to support and learn about other hardware design domains within Hitachi Rail including trainborne, mechanical, networking, and power.

Our Talent Acquisition Team is looking forward to hearing from you

We look forward to receiving your application in just a few clicks via our career portal.

For further information about Hitachi Rail as an employer visit us on www.hitachirail.com/careers

About us

Our motivation is the mobility turnaround. To achieve this, our teams find innovative products and solutions that ensure the operation and reliability of the entire rail network and increase capacities on the rails.

Our projects are diverse. To make our teams even stronger, we are looking for your support. In return, we offer you an attractive overall package with the following benefits:

• Stronger together: Networking through internal networks and working in international teams
• Our drive: Together, we are laying the foundations for the digitization of the rail around the world, to get people safely to their destinations and to their loved ones!
• Attractive conditions: A secure and permanent job with a global company

Notes

Equal opportunities and self-determined participation of severely disabled persons and persons of equal status as well as respectful cooperation are firmly anchored principles within Hitachi Rail and its subsidiaries. We also aim to offer all our equal opportunities to start a career and to receive training and further education in our company. We consciously promote diversity and togetherness in our teams.

Thank you for your interest in Hitachi Rail. If your application is of interest, we will be in contact. Please do not hesitate to discover more about us and our latest jobs at https://www.hitachirail.com/careers.

At Hitachi Rail, there is a place for everyone. We welcome and value differences in background, age, gender, sexuality, family status, disability, race, nationality, ethnicity, religion, and world view. It is our commitment to create an inclusive environment - we are proud to be an equal opportunity employer.

We would be delighted if you would be one of our followers at https://www.linkedin.com/company/hitachirail.

Job Description

You will Designs, troubleshoots software programmer for software enhancements and new products. Develop software tools including operating systems, compilers, routers, networks, utilities, databases and Internet-related tools. Determine hardware compatibility or influence hardware design.

You will report to Engineering manager and follow a Hybrid working schedule in Singapore.

Your Responsibilities:

• You will require a good background in communication protocol firmware development and real-time control systems.

• You will help design embedded software subsystems. These subsystems will increase and balance a variety of goals. The goals include run-time performance, memory requirements, simplicity, correctness, development time, effort, reusability, extendibility, reliability, and safety.

• You will need to maximise the reuse of existing internal or external software components to shorten the product development cycle.

• You will Have knowledge in Industrial Automation, PLC Programming

• You will Have Experience programming 32 bits Microcontroller (ARM) and developing low-level device driver.

• Industrial Communication Protocol: CIP, or EtherNet/IP

The Essentials - You Will Have:

• Degree / master's in computer science/ Embedded Systems / Computer Engineering / Electrical Electronic Engineering with concentration in Embedded Software engineering

• Minimum 4+ years of experience developing Real-time Embedded Systems.

• Knowledge in programming language: C, C++

• You have certification in CERT Secure Coding in C and C++

The Preferred - You Might Also Have:

• You have Experience using different hardware-assisted debugging tools

• You have Experience of Agile process, static analysis tool and version control tools (e.g. ClearCase, Rational Team Concert) will be an advantage

• Open-minded, a willingness to experiment within acceptable boundaries.

Our benefits package includes …

• Comprehensive mindfulness programmes with a premium membership to Calm

• Volunteer Paid Time off available after 6 months of employment for eligible employees

• Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation.

• Employee Assistance Program

• Personalised wellbeing programmes through our OnTrack programme

• On-demand digital course library for professional development

• ... and other local benefits!

At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles.

#LI-NB1

#LI-Hybrid

Job Description:

• Design, develop, and optimize high-voltage and RF power electronics used for plasma ignition, sustainment, and modulation.
• Create detailed electrical schematics, PCB layouts, block diagrams, and system architecture for plasma lighting drivers and control circuits.
• Provide technical support to the plasma lighting Test & Maintenance team to troubleshoot and resolve technical issues.
• Collaborate cross-functionally with process engineering and production teams to improve productivity.
• Support QA in conducting failure analysis.
• Design and develop NPI (New Product Introduction) products for global customers.

Job Requirements:

• Bachelor’s degree in Electrical Engineering, Physics, or a related field. An advanced degree is an advantage.
• At least 5 years of professional experience in electrical engineering, with a strong focus on power electronics, RF systems, or high-voltage design.
• Direct experience with plasma lighting, gas discharge systems, RF-driven lamps, or related plasma technologies is preferred.
• Strong understanding of manufacturing processes for plasma arc lighting devices.
• Experience in power electronics and control circuit design.
• Knowledge of EMI/EMC considerations in lighting systems.
• Willingness to travel regularly (e.g., weekly) to Batam to oversee production activities and support NPI projects.

Responsibilities:

• Design, develop, and maintain backend services and APIs for global products using Java.
• Build a high-performance, highly available, and secure backend system to provide robust support for BigPay Fiat business operations.
• Engage in and improve the whole lifecycle of service, from inception and design, through to deployment, operation, and refinement.
• Develop and maintain tools, re-designing capacity planning infrastructure for greater scalability.
• Troubleshooting, diagnosing, fixing software issues, and ensuring data security, and end-to-end system architecture.

Responsibilities:

• Minimum of 7 years of experience in software development and architecture.
• Strong expertise in Java and backend frameworks (e.g., Spring Boot, RESTful APIs)
• Experience with databases (SQL and/or NoSQL), messaging systems (e.g., Kafka, RabbitMQ), and microservices architecture
• In-depth understanding of Linux and computer networks.
• Experience in profiling, benchmarking and optimizing ML applications
• Middleware:
• Java code development experience, preferably Apache open source project developers
• Experience in high availability, high performance, and resource optimization.

Job Overview

We are looking for an experienced Senior Desktop Engineer to support and manage end-user computing environments in a structured enterprise setting. This role is responsible for ensuring smooth day-to-day IT operations, resolving escalated technical issues, and maintaining desktop infrastructure standards.

The successful candidate will provide Level 2/Level 3 support, oversee endpoint lifecycle management, and collaborate with infrastructure and security teams to ensure system reliability and performance.

Key Responsibilities

• Provide advanced technical support for desktops, laptops, printers, mobile devices, and related peripherals
• Manage installation, configuration, and maintenance of Windows operating systems and enterprise applications
• Administer Active Directory, user accounts, group policies, and access permissions
• Troubleshoot complex hardware, software, and network connectivity issues
• Manage endpoint deployment, imaging, and patch management activities
• Support Microsoft 365 applications and email systems
• Maintain IT asset inventory and ensure compliance with internal IT policies
• Coordinate with vendors for hardware repairs and support services
• Prepare technical documentation, SOPs, and knowledge base articles
• Support IT projects such as system upgrades, device rollouts, and workplace transformation initiatives
• Provide mentorship and guidance to junior support engineers when required

Requirements

• Diploma or Degree in Information Technology, Computer Science, or related discipline
• Minimum 4 to 6 years of experience in desktop support or end-user computing environment
• Strong knowledge of Windows OS, Microsoft 365, and desktop hardware troubleshooting
• Hands-on experience with Active Directory and Group Policy
• Experience with endpoint management tools such as SCCM, Intune, or equivalent
• Good understanding of ITIL processes and structured IT support environments
• Strong problem-solving skills and ability to manage escalations independently
• Good communication skills and customer-focused mindset

Preferred Skills

• Experience supporting hybrid or cloud-based environments (Azure, AWS)
• Exposure to virtualization technologies such as VMware or Hyper-V
• Relevant certifications such as CompTIA A+, ITIL Foundation, or Microsoft certifications

Please send your detailed resume in MS Word format to resume@goldtecHRs.com with

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.