Total 2,606 Quality Assurance / Control job vacancies

QA/QC Engineer (Site) — Semiconductor Construction

Quality Assurance Management (QAM) Asia Pte. Ltd. · Singapore · On-site

Build the cleanrooms behind the world's most advanced chips.

Every wafer that ships from Singapore's fabs starts with piping that was welded right, pressure-tested right, and signed off right. That's the job.

QAM is the QA/QC partner the biggest names in semiconductor — Micron, Intel, TI, and the major foundries — trust to make sure their facilities are built to spec the first time. We're looking for a mechanical/Electrical/Process QA/QC Engineer who takes pride in catching the defect before it becomes a problem, and we'll put you on the largest projects in the region.

If you know your way around a weld map, a helium leak test, and an MOS — and you'd rather be on the floor than behind a desk — read on.

What you'll do

• Own the mechanical and process-piping QA/QC scope on live semiconductor construction sites — UHP and specialty gases, high-purity process piping, CDA, PCW, chilled water and process utilities.
• Run the inspections that matter: weld fit-up and visual inspection, walk-downs against P&IDs, ISO drawings and specs, and hold-point sign-offs that gate the work forward.
• Witness and verify pressure, helium leak, moisture, oxygen and particle-purity testing — and make sure every result is documented and traceable.
• Review and mark up ITPs, method statements (MOS), WPS/PQR and material submittals; verify incoming material authenticity before it's installed.
• Raise, track and close out SORs and NCRs — and coach the crews so the same issue doesn't come back.
• Keep the quality record clean and current in the project's digital systems, right through to testing, commissioning and handover.

What you'll bring

• 4–7 years of QA/QC site experience in semiconductor, electronics, pharmaceutical, oil & gas or comparable high-spec industrial construction.
• Hands-on knowledge of process and high-purity piping: orbital welding, tube fit-up, fittings, valves, pressure testing and leak/purity validation.
• Confident reading P&IDs, isometrics, layouts and technical specs, and applying ASME, ANSI, ASTM and relevant codes.
• A degree or diploma in Mechanical Engineering (or equivalent technical experience), and the discipline to keep documentation audit-ready.
• Comfortable on an active construction site, coordinating with contractors, vendors and owner teams — and not shy about stopping work when quality demands it.

Bonus points: Will to travel, Malaysia, Vietnam, Europe and India. UHP gas / high-purity systems experience, prior work on semiconductor fab or ATM facilities, exposure to CxAlloy / Autodesk ACC or similar QA platforms, and any T&C / commissioning background.

Why QAM

• Work on the most advanced semiconductor facilities being built in Asia, with a company that's been doing this for three decades.
• Join a 300-strong regional field team and a real career path — from site engineer to discipline lead to programme leadership.
• ISO 9001 / 14001 / 45001 certified, bizSAFE STAR, SEMI member — quality and safety aren't slogans here, they're the product.
• Modern, tablet-based digital QA tools that let you do the engineering, not the paperwork.

Ready?

QAM Asia is an equal-opportunity employer. Singapore-based role;

Job Description:

• Manage deliveries and inspection of all incoming materials and reconcile with purchase orders
• Ensure accuracy of the company inventory system by updating records of physical inventory totals, receipts, adjustments, and returns
• Maintains receipt, binning, posting, records and issuance of materials
• Receives and unpack materials and supplies
• Report damages and discrepancies for goods receipt
• Packing of parts for shipment and dispatch

Requirements:

• Min. NITEC in Mechanical, Information system, Logistics or equivalent
• Preferably with 2-3 year experience in an Aerospace environment
• Knowledge in SAP will be an advantage
• This role requires candidate to be familiar with using Microsoft Excel

Our client is one of the leading players in the medical devices manufacturing sector. Due to business needs, they are now recruiting a Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the east.

The Quality Engineer's responsible is:

• Act as the Quality representative for new product development and sustaining projects within the medical device portfolio.
• Provide quality and compliance support throughout the product development lifecycle, including design changes, design reviews, verification & validation, usability studies, process validation, and labeling activities.
• Lead risk management activities, including Risk Management Plans, Hazard Analysis, Risk/Benefit Assessments, and Design/Process FMEA.
• Partner with cross-functional teams to identify product risks, investigate potential failure modes, and implement effective risk control measures.
• Ensure compliance with ISO 13485, FDA regulations, customer requirements, and applicable quality standards.
• Develop, review, and maintain quality procedures, SOPs, and documentation to support product development and Quality Management System (QMS) requirements.
• Support internal, supplier, and external audits, including the investigation and closure of non-conformities.
• Drive continuous improvement initiatives to enhance product quality, process effectiveness, and QMS compliance.
• Serve as a Quality Subject Matter Expert (SME) and provide guidance to engineering and project teams on quality and regulatory matters.

Job Requirements:

• Degree in life science related discipline
• Min 5 years experience in quality design within medical devices sector
• Experience in ISO13485

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Handle customer complaints, returns, and improvement requests; monitor progress and ensure efficient resolution.
• Coordinate customer audits, QA visits, and surveys, including follow-up activities to address findings.
• Manage customer requests and maintain relevant customer satisfaction metrics.
• Collaborate with cross-functional teams to resolve quality issues and meet customer requirements, driving product quality improvements.
  

Requirements:

• Minimum Bachelor's degree in Electronics Engineering, Electrical Engineering, Material Science, Chemistry and Physics.
• Basic understanding of semiconductor technology.
• >3 years’ relevant experience in module process/integration and/or quality field handling customer.
• Knowledge of problem solving (8D methodology), statistical techniques, production part approval process (PPAP) and planning/project management is an advantage
• Knowledge of ISO9001/ISO/TS16949 or VDA6.3 standards and audit handling/experience is preferred
• Strong project management skills and ability to plan effectively.
• Excellent communication and negotiation skills; capable of effective collaboration with external partners and customers.
• Proficiency in presentation skills.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

PRINCIPAL ACCOUNTABILITIES

QC Inspector will work closely with Supervisor/Lead to complete the daily assigned tasks (incoming inspection, in-process inspection, NDT inspection and final/outgoing inspection). Conducting inspection on various stages of the inspection to ensure the products fulfill the required quality as given in the production requirements.

JOB RESPONSIBILITIES

1. Perform incoming material inspections as per the appropriate Work Instruction (WI).

2. Perform correctly the daily in-process and final inspection of the product in accordance with the Quality Procedure (QP) and WI.

3. Ensure material/component traceability (router sheet) is maintained throughout the manufacturing process.

4. Ensure to clock in/out (VM) and update the router sheet correctly.

5. Ensure only calibrated and validated equipment/measuring devices are used in the inspection processes.

6. Report to the Supervisor/Lead on any non-conformance(s) detected during inspection.

7. Ensure repaired/reworked items are re-inspected before releasing the product for further processing or delivery.

8. Prepare and complete inspection records prior to shipment to customers.

9. Perform any ad-hoc duties as and when assigned by superior.

10. Support in the orientation of new recruitment for the quality team by providing on-the-job-training and sharing the company culture and practice, and method of inspection, etc.

11. Ensures 5S is implemented in the work area.

12. Adheres company’s guidelines with regards to Safety and Quality.

13. Complies to Company Code of Business Conduct.

14. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Self-development – shows personal commitment and takes action to continuously improve. Accepts assignments that broaden capabilities

4. Action Oriented – display a can-do attitude in good and bad times. Steps up to handle tough issues.

5. Knowledge of ISO9001, Quality Management System, Quality Control and usage of measuring devices/tools.

6. Preferably knowledgeable in LDP (Liquid Die penetrant or Non destructive testing).

QUALIFICATION GUIDE

1. Education : NITEC/ O or N Levels

2. Experience : At least 1-2 years of working experience in fast-pace Manufacturing environment (preferably Oil and Gas manufacturing)

3. Communication : Able to communicate in (read, write, speak, listen and Understand) simple English

: Good interpersonal skills

4. Physical : Has to be physically fit (with good eyesight)

5. Working Condition : Shop-floor Environment. Able to work rotating shift and overtime on weekdays, weekends and sometimes public holidays.

The selected candidatewill be responsible for overseeing the end-to-end delivery of 66/230/400KVprotection and control system projects, ensuring design accuracy, regulatorycompliance, and timely execution.

Responsibilities

· Test and commissionprotection and control systems after modifications to ensure operationalreadiness

· Coordinate andcommunicate effectively with contractors, suppliers, business partners, and endcustomers to achieve on-time project delivery

· Collaborate with endcustomers to verify design accuracy and align project milestones with timelines

· Manage and maintain allproject documentation in compliance with client specifications for traceabilityand quality assurance

· Ensure adherence toregulatory requirements and occupational health and safety standards throughoutproject execution

Required competenciesand certifications

· Diploma or Degree inElectrical/Electronic Engineering or a related discipline

· Minimum 3 years’experience as Site Manager for SPPG 66/230/400KV Switchgear projects

·       Good Pay + Good allowance + GoodBonus

·       Interestedcandidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’syour resume to 98332779 ( no Calls)

·       Consultant in-charge : Quah LiLian (Lilian) ( Registration No: R1983286 )

About Venti Technologies
Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Position overview

The System Engineer is responsible for end-to-end system-level quality, integrating cross-functional components, and ensuring efficient issue resolution and continuous system improvement. This role bridges triage, development, and validation, evolving from issue handling to system ownership and optimization.

Role responsibilities

• System-Level Ownership

  • Own system behavior across modules (perception, planning, control, etc.)

  • Understand and manage cross-component dependencies and interfaces

• Advanced Triage & Root Cause Analysis

  • Lead complex issue investigations beyond surface-level triage

  • Drive root cause analysis across software, data, and system interactions

  • Ensure high-quality and timely resolution of critical issues

• Cross-Functional Coordination

  • Act as the central point between engineering, testing, and operations teams

  • Align priorities and drive resolution across multiple stakeholders

• System Quality & Process Improvement

  • Identify systemic issues and recurring patterns

  • Improve triage workflows, feedback loops, and system robustness

  • Propose and implement scalable solutions (not just case-by-case fixes)

• Data-Driven Decision Making

  • Use logs, metrics, and field data to diagnose issues and guide improvements

  • Define KPIs for system performance and triage efficiency

• Technical Leadership (Emerging)

  • Influence system design decisions based on real-world issues

  • Contribute to architecture discussions and quality strategy

Required experience

• Strong system thinking and ability to understand complex, integrated systems

• Experience in debugging, triage, or system integration (AV or similar complex systems preferred)

• Ability to work across teams and drive alignment

• Strong analytical and problem-solving skills

• Familiarity with logs analysis, data pipelines, and debugging tools

Job Description

We are looking for an experienced Audit Director to lead audit and assurance engagements, manage client portfolios, uphold audit quality, and support the continued growth of the firm.

The role requires strong technical audit knowledge, leadership capability, client management experience, and the ability to guide teams in delivering quality work within timeline and budget.

Key Responsibilities

• Lead and manage audit and assurance engagements from planning to completion.
• Review audit workpapers, financial statements, management letters and audit deliverables.
• Ensure audit engagements comply with Singapore Standards on Auditing, SFRS and applicable regulatory requirements.
• Oversee engagement budgets, timelines, staffing and job recovery.
• Provide technical guidance to audit managers and team members.
• Maintain strong client relationships and act as the key contact for assigned client portfolios.
• Identify client service and business development opportunities.
• Monitor audit quality and ensure files are completed in accordance with firm methodology.
• Coach, mentor and develop audit team members.
• Conduct performance reviews and provide constructive feedback.
• Support internal quality control, technical updates and process improvement initiatives.
• Work closely with partners on client matters, technical consultations and firm-wide initiatives.

Requirements

• Degree in Accountancy, Finance or equivalent professional qualification.
• CA Singapore, ACCA, CPA, ICAEW or equivalent qualification preferred.
• Minimum 10 years of external audit experience, including leadership experience in an audit firm.
• Strong knowledge of SFRS, SSA and Singapore regulatory requirements.
• Experience managing multiple audit engagements and client portfolios.
• Strong leadership, coaching and people management skills.
• Strong technical, analytical and problem-solving ability.
• Excellent client service, communication and presentation skills.
• Ability to manage deadlines, competing priorities and a fast-paced working environment.
• Experience with Caseware or audit software will be an advantage.
• Knowledge of MAS-regulated clients, IFRS, US GAAP, Python or UiPath will be an added advantage.

Electrical Engineer (Quality Control)

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Job scopes

1) Implement and manage quality control procedures for electrical works on site.

2) Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

3) Review and verify electrical shop drawings, material submissions, and method statements for compliance.

4) Monitor workmanship to ensure alignment with project specifications and quality standards.

5) Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

6) Liaise with consultants, clients, and subcontractors to resolve quality related issues.

7) Maintain quality documentation, inspection records, and test reports.

8) Support handover and commissioning by ensuring all electrical quality requirements are met.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Engineer (Quality Control)

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Job scopes

1) Implement and manage quality control procedures for electrical works on site.

2) Conduct inspections, audits, and testing of electrical installations, equipment, and materials.

3) Review and verify electrical shop drawings, material submissions, and method statements for compliance.

4) Monitor workmanship to ensure alignment with project specifications and quality standards.

5) Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.

6) Liaise with consultants, clients, and subcontractors to resolve quality related issues.

7) Maintain quality documentation, inspection records, and test reports.

8) Support handover and commissioning by ensuring all electrical quality requirements are met.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities

• Conduct daily incoming, in-process, and final inspections on manufactured spare parts to ensure compliance with quality standards and specifications.
• Operate and program CMM (Zeiss) equipment to conduct dimensional measurements and inspections analysis.
• Prepare and maintain QC inspection reports and related documentation.
• Perform measurements using micrometers, vernier calipers, height gauges, and profile projectors.
• Identify and report any non-conformances or quality issues to the QC Supervisor.
• Maintain inspection equipment, ensure calibration status, and assist in preventive maintenance.
• Follow and uphold ISO/AS9100/TS16949 or relevant quality standards and procedures.
• Keep inspection and work areas clean, safe, and organized.
• Support continuous improvement initiatives within the QC department.
• Perform any other duties as required by the QA Manager.

Job Requirements:

• Diploma/Certificate in Mechanical Engineering or related technical field.
• Minimum 2–3 years of QC inspection experience in a CNC machining or precision manufacturing environment.
• Proficient in CMM operation and basic programming.

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)