Total 4,941 electronic engineer job vacancies in Engineering category

Job Title : Electrical Engineer (ID3480)
Location : Yio Chu Kang
Working Hours: Mon-Fri 8:00am – 5:30pm
Salary : $3600 - $4000

Job Descriptions :
• Assist in creating and refining electrical drawings, ensuring they align with project specifications and industry standards.
• Perform basic load calculations and other engineering analyses required for project development.
• Generate material take-offs to aid in accurate project planning and cost management.
• Support the timely execution of deliverables by coordinating project schedules, resources, and deliverables.
• Assist in the arrangement of equipment installation, testing, and commissioning activities, ensuring smooth project completion.
• Collaborate with the manager to address client inquiries and provide effective solutions for electrical issues.
• Maintain consistent communication with clients, vendors, contractors, and sub-contractors to ensure project alignment and success.
• Build and nurture strong relationships with customers and clients to foster trust and satisfaction.

Responsibilities

• Design and develop electrical systems including power distribution, motor control, and sensor integration
• Own PCB design, schematic capture, and board bring-up
• Work on cabling architecture, signal routing, and connector selection for electromechanical assemblies
• Collaborate with mechanical and firmware engineers to integrate electrical systems into the full product
• Test, debug, and iterate on electrical designs through prototyping and production cycles
• Support the transition of designs from prototype to production-ready

Requirements

Must-Have:

• Degree in Electrical Engineering or related discipline
• Solid foundation in PCB design, power electronics, and signal processing
• Hands-on experience with hardware prototyping and board-level debugging
• Comfortable working in a cross-functional team with mechanical and software engineers
• Open mindset and willingness to work on unfamiliar problems

Nice-to-Have:

• Experience with motor drivers, actuator control, or power systems for moving hardware
• Familiarity with sensor integration (IMU, force/torque, encoders)
• Background in consumer electronics, medical devices, drones, or any hardware product that ships

Additional Information

• Flat organisational structure with direct access to leadership
• Equity compensation (ESOP with vesting)
• Performance bonuses twice a year, including during probation (pro-rated)
• Flexible leave policy
• No specific industry background required. We are looking for strong EE fundamentals and energy over domain experience.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Job Title: Digital Infrastructure Engineer (ID1593)
Location: Pioneer, transport pick up Singapore
Working Hours: Mon to Fri 8:30am – 17:30pm
Salary: Up to $4000
Benefit: 12 days Annual Leave, AWS and Variable Bonus

Job Description
• To review the current IT infrastructure and propose improvement plans.
• Plan and implement the work based on company policy and ensure on schedule.
• Support and maintain the MS Windows servers, SAN Storages and CISCO network infrastructure of the whole company.
• To maintain and improve backup of the systems.

• Well-Established Company
• Basic $3500 to $5000 + AWS +Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: WEST
• Normal Working Hours (Mon to Fri)

Job Responsibilities:

• Review of tender documents

• Preparing, compiling bid proposal in accordance with the customer specification

• Coordinate and liaise with internal departments to ensure timely responses to queries subsequent to bid submission

• Liaising and seeks competitive quotations.

• Negotiate with customer and sub-contractor about pricing.

• Source for suppliers and sub-contractors for quotation for tendering.

• Ability to estimating the cost of the assigned scope and prepare bill of quantities (BOQ), Schedule of Rate (SOR), Schedule of breakdown (SOK) and Schedule of Technical Data (SOT)

• Work closely with the Engineering team to ensure project handover is carried out and that support is provided during the execution phase if required.

Requirements:

• Possess at least a Diploma or Bachelor's Degree in Mechanical or Electrical Engineering

• 2 to 4 years of relevant experience, preferably in HVAC / BMS industry.
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background 

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $ 2000 to $ 3500 + Variable Bonus + AWS
• Excellent Welfare and Benefits + Career progression
• Working location: Northeast 
• 5 days’ work week (Normal Working Hours)

Job Responsibilities:

• Liaise and coordinate with clients, vendors, and internal teams on a regular basis in order to perform the assigned tasks
• Perform preventive and corrective maintenance to installed security systems, ELV, and controls & instrumentation systems and the related peripheral devices
• Attend urgent fault calls, troubleshoot, follow-up and resolve the issue
• Assist on the A&A, enhancement, and upgrading works related to the existing deployed system
• Monitor and maintain the minimum required to both clients and internally on a regular basis
• Assist on the claim preparation to clients

Requirements:

• Diploma in Electrical / Electronic Engineering or equivalent
• Possess own transportation would be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)
EA Recruitment Pte Ltd
EA License No: 21C0492

GIC is one of the world’s largest sovereign wealth funds. With over 2,000 employees across 11 locations around the world, we invest in more than 40 countries globally across asset classes and businesses. Working at GIC gives you exposure to an extraordinary network of the world’s industry leaders. As a leading global long-term investor, we Work at the Point of Impact for Singapore’s financial future, and the communities we invest in worldwide.

Technology Group
We experiment, design, and lead a 24×7 global business where we support core capabilities in asset management, trading, investment operations, and risk management. We deliver secure, reliable, and integrated solutions, and provide insights on new, and emerging technologies. 

Infrastructure & Cybersecurity Resilience (ICR)
We design, build, and secure the technology foundations that power GIC’s global investment operations. We aim to deliver resilient, scalable, and secure infrastructure that empowers our people and businesses to perform securely, efficiently, and effectively.

What impact will you make in this role?

As a VP, SRE Engineer (Splunk), you will lead the design, implementation, and optimization of enterprise observability and reliability solutions across infrastructure and application domains. You will leverage Splunk and complementary monitoring platforms to drive proactive alerting, automation, and resilience - ensuring operational stability, risk control, and compliance with financial regulatory standards.
You will define and implement advanced SRE frameworks, establish Site Reliability metrics (SLOs, SLIs, Error Budgets), and build automation pipelines that enhance system reliability, reduce Mean Time to Detect (MTTD) and Mean Time to Resolve (MTTR), and strengthen overall operational resilience across the organization.

What will you do as a VP, SRE Engineer (Splunk)?

Observability Engineering & Governance

• Architect and maintain enterprise SIEM solutions aligned with operational resilience mandates (e.g., MAS TRM, DORA, APRA CPS 230).
• Lead deployment, configuration, and optimization of Splunk for full-stack visibility across infrastructure, applications, networks, and user experience.
• Define and enforce telemetry data governance standards—metrics, logs, and traces—ensuring consistency, retention compliance, and security.
• Integrate Splunk with incident management, ITSM, and AIOps systems to enable predictive alerting and anomaly detection.
• Act as the SIEM/Splunk subject matter expert (SME) for architecture reviews, platform upgrades, and performance tuning.

Reliability Engineering & Automation

• Implement and champion SRE frameworks and reliability practices for mission-critical systems.
• Design and automate runbooks, alerts, and self-healing workflows using Python, Ansible, and Terraform.
• Collaborate with Application, Infrastructure, and Cyber teams to embed reliability principles into the delivery lifecycle.
• Conduct resilience, chaos, and capacity testing aligned with business continuity and disaster recovery standards.
• Define and track error budgets, reliability scorecards, and service health indicators for production workloads.

Cloud & Platform Integration

• Engineer SIEM for cloud-native workloads in AWS and Azure, ensuring visibility across compute, storage, and network layers.
• Integrate Splunk and cloud observability tools into CI/CD pipelines and landing zones to ensure continuous compliance.
• Implement infrastructure-as-code (IaC) models using Terraform and Ansible for consistent, auditable provisioning.
• Collaborate with Cloud, DevOps, and Security teams to ensure telemetry aligns with audit, compliance, and operational risk requirements.

Operational Excellence & Collaboration 

• Drive reduction in incident recurrence, MTTR, and manual intervention through observability-led automation.
• Partner with Service Delivery, Cyber, and Application teams to enable predictive incident prevention and root cause transparency.
• Develop and maintain executive dashboards and reports showcasing availability, reliability KPIs, and operational risk indicators.
• Provide technical leadership during major incidents, post-incident reviews, and audits, ensuring lessons learned are codified into automation and process improvements.

What makes you a successful candidate?

• Bachelor’s or Master’s degree in computer science, Engineering, or related discipline.
• 10+ years’ experience in Infrastructure, Cloud, or SRE roles, with at least 5+ years specializing in SIEM/Splunk engineering or observability in financial or regulated environments.
• Proven hands-on expertise in:

• SIEM Platforms: Splunk (must), EL/Elastic

  Automation / IaC: Terraform, Ansible, Python, CI/CD tools

  Cloud Platforms: AWS (CloudWatch, X-Ray, CloudTrail), Azure (Monitor, Log Analytics, App Insights), Datadog, ServiceNow 

• Deep understanding of SRE principles, service health modelling, error budgets, and auto-remediation design.
• Strong analytical and troubleshooting skills, with the ability to perform deep-dive investigations and develop long-term preventive solutions.
• Familiarity with financial sector operational resilience frameworks, regulatory compliance, and incident governance.

Preferred Certifications:

• Splunk Certified Power User / Splunk Certified Admin / Splunk Certified Architect
• Terraform / Ansible / Python Certified Expert
• AWS Certified DevOps Engineer / Azure DevOps Expert
• SRE Foundation / Practitioner (DevOps Institute)
• ITIL v4 Managing Professional

Work at the Point of Impact
We need to be forward-looking to attract the right people to help us become the Leading Global Long-term Investor. Join our ambitious, agile, and diverse teams - be empowered to push boundaries and pursue innovative ideas, share your views, and be heard. Be anchored on our PRIME Values: Prudence, Respect, Integrity, Merit and Excellence, which guides us in how we make our day-to-day decisions. We strive to inspire. To make an impact. 

GIC is a Great Place to Work

At GIC, our offices are vibrant hubs for ideation, professional growth, and interpersonal connection.  At the same time, we believe that flexibility allows us to do our best work and be our best selves. Thus, our teams come into the office four days per week to harness the benefits of in-person collaboration, but have the flexibility to choose which days they work from home and adjust this arrangement as situational needs arise. 

GIC is an equal opportunity employer 
As an employer, we passionately believe every individual brings with them unique diversity of thought and perspectives to meaningfully enrich perspectives of GIC teams to drive competitive performance. An inclusive environment yields exceptional contribution.

Learn more about our Technology Group here: 
https://gic.careers/group/technology-group/

To be considered for the role, please submit a formal application through the GIC Careers site at: https://careers.gic.com.sg/job-invite/17102/

• Provide presales technical support by designing and recommending suitable technology solutions that address clients’ business and technical requirements.
• Work closely with the sales team to analyze customer needs and propose effective cybersecurity and networking solutions.
• Deliver product presentations and live demonstrations to customers, partners, and internal teams.
• Prepare technical proposals, solution architectures, and compliance matrices for tenders and project bids.

Requirements:

• Diploma in IT or equivalent
• At least 2 years of presales experience within the IT networking and cybersecurity domain.
• Experience with technical presentations, product demonstrations, and proof-of-concept deployments.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description & Requirements

Responsibilities:

•  Take charge of all electrical and mechanical assemble issue
•  Take charge of all electrical accessories and wiring parts purchase loading
•  Liaise with subcontractors
•  Manager stock inventory level

Requirements:

•  Nitec equivalent or equivalent in Mechanical Engineering
•  Physically strong as parts / modules might be heavy
•  Working experience in both mechanical and electrical environments will be an advantage
• Open for contractual role

Ang Hoe Keong | EA Personnel Registration No.: R1106345

RS Recruitment Agency | EA License No. 17C8809

Job Description:

As a QEM PQE Electrical Failure Analysis (EFA) Engineer, you will be responsible for driving deep technical understanding and resolution of yield, quality, and reliability challenges for advanced NAND memory products manufactured in Fab10.

You will support both new product introduction (NPI) and high-volume manufacturing (HVM) by performing die-level electrical analysis, failure mode construction, and innovative characterization to enable robust product qualification and continuous yield improvement. Leveraging strong knowledge in device physics, probe testing, and wafer fabrication processes, you will identify root causes of electrical failures and translate insights into actionable test, process, and design improvements to enhance product performance and outgoing quality.

Job Responsibility:

• Perform electrical failure analysis (EFA) using bench characterization to identify failure mechanisms at die, circuit, and transistor levels

• Construct failure models and root cause understanding for yield excursion, reliability issues, and customer return cases

• Design and execute bench DOE and probe engineering experiments to validate hypotheses and drive yield/quality improvement

• Translate characterization results into test, process, or device optimization solutions to improve yield, reliability, and product quality

• Conduct circuit and layout tracing analysis to correlate electrical failure signatures to physical/process limitations

• Support NPI qualification and HVM issue resolution, ensuring timely product release and manufacturing stability

• Drive data-driven yield improvement programs through close collaboration with cross-functional teams (PI, TD, PE, TSE, YE)

• Troubleshoot complex issues across test conditions, probe limitations, and device design interactions

• Develop custom test conditions, scripts, and methodologies for advanced failure validation and experiment execution

• Contribute to process capability improvement and cost reduction initiatives by resolving abnormal manufacturing behaviors

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.​

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

  Requirements:

• Bachelor’s / Master’s Degree in Electronics/Microelectronics/Material Science/Physics/Applied Science

• Excellent problem-solving and analytical skills.

• Proven ability to communicate effectively both written and verbal to all level.

• Proven ability in multi-tasking complex projects and driving them to completion.

• Strong teamwork skills and the ability to build strong peer relationships

• Knowledge of Circuit analysis and layout tracing, Yield analysis and failure mechanisms

• Strong understanding of NAND memory operation and architecture, CMOS device physics and wafer fabrication processes

• Hands-on experience in Electrical failure analysis, bench characterization, Probe testing and test flow understanding, Data analysis and DOE methodology

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Embody Micron’s core values:
  People – Respect, develop, and empower others
  Innovation – Drive continuous improvement and breakthrough thinking
  Tenacity – Show grit and determination
  Collaboration – Build trust and foster teamwork
  Customer Focus – Deliver excellence and value

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment based on process specifications. 
• Ability to use computer-based programs and applications to perform daily work/duties.
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.
• Provide machine operations coverage and backup supports when necessary.

Requirements:

• Diploma/Degree in Microelectronics/Electrical/Mechanical/Chemical Engineering or equivalent.
• Understanding of semiconductor process - at least 1-3 years of experience in semiconductor processes (Photolithography, Dry/Wet Etch/Cleans, Thin Films, Diffusions, Chemical mechanical Polishing, Metrology, etc.)
• Able to perform independently yet working in a team. 
• Willing to perform in 12-hours shift working arrangement.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

• Support, manage and coordinate Mechanical works and services for building construction projects
• Plan, develop, and manage work schedules to ensure tasks are completed on time.
• Prepare progress reports for clients and project managers, detailing delays, defects, and necessary rectification measures for Mechanical works.
• Provide technical guidance and resolve Mechanical-related issues efficiently.
• Report on Mechanical progress and arrange site inspections with contractors, subcontractors, and clerk-of-works.

Requirements

• Minimum 1-3 years of relevant experience with an M&E Contractor
• Diploma/Degree in Mechanical, Mechatronics or relevant engineering discipline
• Local construction knowledge

If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to koh.dickson@bayesrecruitment.com

Dickson KOH, EA Registration R1103367

www.bayesrecruitment.com

Responsibilities :

• Support equipment development activities for new or enhanced semiconductor tools and subsystems
• Assist with tool characterization, engineering experiments, and data collection during development or early deployment phases
• Analyze equipment data to support capability assessments, design learning, and risk reduction
• Support documentation of equipment requirements, engineering changes, lessons learned, and development reports
• Participate in tool build, installation, upgrade, and qualification activities from a development perspective
• Collaborate with vendors, manufacturing, process engineering, and facilities teams under engineer supervision
• Prepare technical summaries and presentations for development reviews and project achievements
• Adhere to all safety, environmental, and cleanroom requirements

• Maintain and publish roadmaps to define work/CIP’s required to move toolsets from one EMI level to the next in preparation for transfer to HVM.


Requirements :

• Bachelor’s or Master’s Degree or PhD in Mechanical, Chemical, Electrical/Electronic Engineering

• Understanding of Physical Vapour Deposition (PVD) or Chemical Vapour Deposition (CVD) equipment operation, working principles, fixing, and tool installation procedures

• Exposure to R&D PCVD equipment transfer and the ability to develop/optimize equipment hardware design

• Exposure to PCVD pump/abatement/chiller selection and ability to develop/optimize equipment hardware design is preferred

• Remarkable oral and written communication skills, demonstrating the ability to express messages clearly and effectively on a local and global scale.

• Shown ability to prioritize and handle numerous projects simultaneously, efficiently applying available resources or seeking peers’ and/or management help to drive solutions.
  

  Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenan

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Key Responsibilities

• Design, deploy, and manage Kubernetes clusters using Rancher in production and non-production environments.
• Integrate and manage NeuVector for container security (runtime scanning, policy enforcement, vulnerability management, etc.).
• Implement platform automation using tools such as Terraform, Ansible, Helm, and CI/CD pipelines.
• Collaborate with security and networking teams to define and enforce policies across containerized platforms.
• Build and maintain observability (monitoring, logging, alerting) and operational dashboards.
• Work closely with development and DevOps teams to provide reliable platform capabilities.
• Participate in incident response, RCA, and performance tuning activities.
• Optionally contribute to HCI platform operations and VM orchestration if using Harvester.

Required Skills and Experience

• 6+ years of experience in DevOps, SRE, or Platform Engineering roles.
• Strong hands-on experience with Kubernetes architecture and operations (preferably K8s v1.20+).
• Experience managing production-grade Kubernetes clusters with Rancher.
• Solid understanding of container security best practices and operational experience with NeuVector.
• Proficiency in infrastructure as code (e.g., Terraform, Helm, Ansible).
• Experience with CI/CD tools such as GitLab CI, Jenkins, or ArgoCD.
• Good knowledge of Linux systems, networking, and shell scripting.
• Understanding of monitoring/logging tools such as Prometheus, Grafana, Fluentd, ELK, or Loki.

Nice to Have

• Experience with Harvester or other HCI platforms for VM management on bare metal.
• Familiarity with air-gapped or edge deployments.
• Exposure to hybrid/multi-cloud platform deployments.
• Certifications in Kubernetes (CKA/CKS), Rancher, or related technologies.

Key Responsibilities

• Define and implement NAND Flash reliability test flows to assess product reliability performance and prevent extrinsic/intrinsic reliability escapes.

• Perform high‑volume statistical data analysis to evaluate NAND DPM/ intrinsic reliability risks and trends.

• Drive electrical failure analysis, including  advance characterization, to identify root causes and solution spaces.

• Develop short‑term countermeasures such as targeted stresses and screens, applying knowledge of digital/analog circuits, device physics, and process engineering.

• Qualify the product with innovative control measures to provide best in Class DPM and Cell reliability.

• Collaborate closely with Fab, NAND Technology, NAND Design, Product Development, System Development, and Quality/Reliability teams to develop solutions and enable shipment of high‑quality end products.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and aligning with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Support customer inquiries and provide technical insights related to product reliability.

• Drive critical initiatives to enhance the overall reliability program and influence the direction of future product development.
  

  Qualifications And Skills:

  • Bachelor’s degree  or Master’s degree  with of relevant experience in Electrical Engineering or related field

  • Knowledge in Semiconductor Reliability, NAND Technology, and Electrical Failure Analysis.

  • Understanding in Design, Device Physics, Circuits,  Process.

  • Strong statistical analysis, communication, and problem‑solving skills.

  • Experience with application of AI tools, LLMs ,  data analysis tools (e.g., Python, JMP, Tableau).

  • Strong analytical and problem‑solving skills.

  • Team player and self driver.