Total 495 process development engineer job vacancies in George Town

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Project & Commissioning Engineer - European Engineering MNC
1 year renewable contract
Salary: $4000 max
5 days work week, 8am - 5pm
Location: Ayer Rajah (required to visit sites)

Job Scope:
Applying standard techniques and procedures to perform project managing. Ensure product quality, on time delivery, and within targeted cost.

Performing Robot and PLC logic programming, testing, and troubleshooting as well as robot studio simulation.

Preparing and maintaining project documentations according to ISO standard

Assisting customers on technical issues, improving quality and customer experience in products and services.

Assisting in preparing proposal/presentation of engineering projects.

Fresh graduates welcomed.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During Solutions Delivery Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Self Starter, positive attitude and customer oriented.
• Must be a Singaporean
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

Responsibilities:

• As part of a scrum team, develop, maintain, and enhance web application
• Collaborate with Product Owner, Project Leader to understand our solution’s user journey and product roadmap
• Own and be responsible for the full software development life cycle:
  o Technical, solution and UI/UX design
  o Write maintainable and efficient code while incorporating security best practices
  o Component and integration testing
  o Maintaining Continuous Integration (CI) and Continuous Deployment (CD) pipelines
  o Supporting post-release software maintenance and enhancement
  o Create and update user guides and internal documentations
• Participate in code reviews to maintain high standards of code quality and system reliability
• Collaborate with cross-functional teams, including product, design, and QA, to deliver high-quality software
• Contribute to innovative idea, developing them to improve operations, increase efficiency and productivity
• Work within a Google Cloud Platform environment, utilizing its services for application deployment and monitoring.

Requirements:

• Minimum of 2years of professional software development experience
• Bachelor’s degree in Computer Science, Engineering, or related fields
• Strong proficiency in C# and ASP.NET Core or similar development frameworks
• Solid experience with React.js for front-end development
• Expertise in SQL for database development and optimization (e.g., MS SQL Server, PostgreSQL)
• Hands-on experience with GitLab for source code management, CI/CD pipelines, and version control
• Strong understanding of RESTful API design and implementation
• Knowledge of software development best practices including agile methodologies and unit testing
• Proven experience in Figma is a plus

Responsibilities

• Responsible for day-to-day network operations, covering network switch, firewall, WLC, AP, VPN, WAF and cloud networking, ensuring availability and continuity of services
• Administer and manage network routing and authentication
• Monitor network uptime and usage
• Perform network maintenance and upgrades including patches, hot fixes and security updates
• Perform scan on network/system logs for malicious activities
• Work closely with cyber security operations, covering endpoint security, SIEM and cloud security
• Liaise with 3rd party vendor and cross department for network/security projects
• Participate on internal and external network/security audit
• Maintain and update network inventory and diagram
• Investigate and troubleshoot any network incident or vulnerability

Qualifications

• Diploma / Degree in Information Technology or equivalent with at least 2 years of experience in networking
• Experience in administration and troubleshooting skill of: Firewall ; Switches ; Wireless Controller ; Access Point ; NAC ; WAF ; Services: AAA, DNS, DHCP, MFA, backup tool, SNMPCloud networking ; Hands-on experience on endpoint protection and SIEM ; Knowledge in infrastructure network design ;
• Knowledge and/or experience in the following will be advantageous: Open-source technology, Automation
• CCNA, CompTIA Security+ or equivalent certification will be advantageous
• Strong technical & troubleshooting skills.
• Strong documentation and organizational skills.
• Independent worker with minimum supervision.
• Good team player and process driven.
• Good verbal and written communication skills.
• Candidates with no relevant experience are welcome to apply

• Responsible for piping layout and engineering related activity not limited to Pipe and Pipe support design, Piping Material Handling activity,Piping Material Engineering activities like MTO (bulks, manual valves, SP items, Pipe Support), Requisitions, Supplier drawings review, Pipe Stress Analysis activities like preparation of stress critical line list, analysis using Caesar II, report preparation, Spring data sheet preparation, supplier drawing reviews, pipe isometric and pipe support checking, piping line listpreparation etc
• Coordinate on project specific issues with the respective subject specialist Lead
• Be responsible for the technical integrity for compliance to project HSE requirements relevant to the scope of work.
• Work closely with the piping lead / subject specialist lead of the project to understand their requirements and address on time. Develop reports as required by the lead.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to subject specific lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.
• Be familiar with the workflows in the project. Taking initiative and provide any input to the Piping Lead / Subject specialist lead on time and highlight in advance if there are any technical challenges.
• Coordinate actively with other offices, for the projects being executed from multiple locations, attend meetings, and communicate effectively.
• Review and provide technical inputs as required by the Project.
• Based on the client specifications, follow project specific procedure related to Piping Layout and Engineering.
• Be responsible for the deliverables and to ensure that the design complies with the specification, integrity, and quality requirements of the project.
• Be responsible in finalization piping systems requirements such as, PED and testing requirements of NDT, hydro and pneumatic in line with the project requirements.
• Be responsible to procurement support for the Piping components, the activities vary from finalization of MTO, placing purchase orders in the systems, valuation of technical offers from the suppliers and ensuring the timely delivery with full project compliance.
• Be responsible for and manage the technical interfaces with equipment and package suppliers, as appropriate, to ensure compliance to Standards &Project Specifications
• Provide technical support to the project to obtain necessary approvals from the verification body / classification society or other applicable approving authorities.
• Represent Piping Discipline in meetings, discussions, audits, verifications, workshops, and technical reviews that relates to piping and be responsible for closeout of actions identified as required.
• Be responsible to align to the progress of Piping Engineering scope and internal and supplier deliverables, where applicable, as per the schedule of the project.
• Be responsible for Management of change within the scope of work for the Piping Discipline on assigned projects.
• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to piping material lead for quick resolution.Plan tasks and issue the deliverables as per company procedures.
• Issue of discipline deliverables in project specific templates.

Work Experience

• Must have a minimum of 12 years of experience having worked in an engineering setup for upstream oil & gas projects (platforms & FPSO projects) serving in the capacity of a Senior Piping Engineer.
• Experience in Software usage for Piping material quantity estimate, Procurement planning, CaesarII, E3D, Navis etc. material traceability and delivery to site.
• Experience in Norwegian projects and applicants experience tothe relevant standards, NCS and UKCS sectors preferred.
• Must have had prior work experience with medium/large sized brownfield and green field projects in the Oil and Gas sector with similar roles and possess an excellent understanding of project phases, milestones, and deliverables.
• Must have in-depth knowledge in Piping and cost-effectiveness, with a proven track record on projects in the upstream oil and gas sector.
• Must possess a thorough understanding and knowledgeof oil and natural gas industry standards suchas, but not limited to, ASME, API (American Petroleum Institute),BS, European Regulations and other relevant standards and guidelines.
• Experience in FPSO projects and HPHT services preferred.

Qualifications

• Must have a minimum bachelor’s degree in mechanical / Material Engineering or other equivalent engineering specialisation.

Other Skills

• Must possess design experience with respect to typical Piping Engineering deliverables, such as, specifications, data sheets (bulks, valves, SP items), MTO, TQ, TBA, Stress critical line list, Stressreports, Isometrics, Pipe Support Drawings, Piping Lists, and Supplier Drawing Reviews.
• Must have excellent technical communication (oraland written) skills with proven ability to present technical issues to designteams, client technical authorities, and client’s project managementrepresentatives and approving bodies.
• Must be a self-starter and be able to work withminimal supervision, make sound decisions, take independent action, analyseproblems, and provide focused solutions to assigned projects.
• Shall possess strong inter-personal andcommunication skills and be able to work well with people at all levels in theorganization.
• Have used common business software applications such as MS Office, MS Excel, Caesar II.
• Must be familiar with using Navisworks

We regret only short listed candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Assistant-Manager%2C-Contracts-&-Admin-Management/33092-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

The candidate will be responsible for developing printable inks based on natural material-derived precursors, such as natural materials-derived calcium phosphate, or related biomineral materials. The work will involve optimizing ink rheology, printability, shape fidelity, and structural stability for extrusion-based 3D printing. The candidate will also design and fabricate porous scaffold architectures with controlled pore size, porosity, and interconnectivity, while optimizing printing parameters such as nozzle size, extrusion pressure, printing speed, and layer height.

A key part of the project will involve post-processing and material conversion of the printed constructs. The candidate will develop and optimize sintering or thermal treatment protocols to convert printed structures into bone-relevant ceramic phases. Through this process, the candidate will help tune the phase composition and mechanical performance of the scaffolds, with the goal of producing reproducible and scalable bone implant prototypes.

Qualifications

•             Bachelor’s degree in mechanical engineering, materials science, or a related field

•             Demonstrated experience in material characterization

•             Team player, able to work collaboratively in a team environment

Duties to be Performed:

Senior Mechanical Engineer – Fire Protection Systems will be responsible for designing and delivering mechanical systems for industrial properties in the semiconductor, electronics, biopharma, and related industries.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Concept, Basic, and Detailed Design of Mechanical Fire Protection Systems, including Fire Sprinkler, Fire Hydrant, Fire Hose Reel in accordance with local and international codes.

• Engineering design of Fire Protection and Detection Systems for new and existing industrial and commercial buildings, ensuring life safety and property protection.

• Conduct feasibility studies and conceptual designs of Fire Protection Systems, evaluating system types (wet, dry, pre-action, deluge) and suppression strategies based on fire risk assessments.

• Review of Fire Protection systems in preparation for testing, commissioning, and validation, ensuring systems function per design intent and performance criteria.

• Provide engineering services for tendering, including preparing technical specifications, BOQ, SOW, conducting site show rounds, and briefing bidders on fire protection packages.

• Develop detailed project plans for Fire Protection scope, including tracking of design milestones, procurement schedules, installation, testing, and commissioning activities.

• Create and maintain comprehensive project documentation, including Fire Protection Calculations, Hydraulic Calculations, Material Submittals, and As-Built Drawings.

• Liaise with clients to understand project-specific fire safety goals and regulatory requirements, and clarify detailed briefs for each fire protection system design.

• Clearly define and align inter-discipline technical interfaces (Mechanical, Electrical, Civil, Architectural) and scope demarcation for fire protection systems.

• Work with CAD Drafters and BIM Modelers to guide system modeling, verify routing of pipes and equipment locations, and conduct field verification to ensure installation compliance.

• Perform Friction Loss Calculations for piping networks, determine pump head requirements, and estimate Power Requirements for fire pumps and associated equipment.

• Conduct Fire Risk Assessments and Smoke Control Calculations, and perform system design analyses for compliance with local codes and international standards

• Promote safe working practices, ensuring all fire protection systems are designed and installed to protect the health and safety of employees, contractors, and clients.

• Liaise closely with QA/QC Engineers to ensure inspections, testing and system commissioning are aligned with approved fire protection specifications and quality standards.

Job / Skills Requirement:

You should have a bachelor's degree in mechanical.

You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centres, or process buildings.

You should be familiar with Singapore’s latest codes, standards, guidelines, regulations, and authorities’ requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.

You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.

Willing to travel/ relocate.

Job Description

• Responsible for extracting, transforming and loading (ETL) of data generated in various stages of IC Design process (e.g. Physical verification stage).
• Integrate data from EDA tools (Calibre, DRV, ICV, Fusion Compiler, Innovus), design databases (netlist and layout), and workflow systems.
• Develop and optimize data workflows to facilitate data collection for analysis, machine learning and dashboard.
• Ensure data integrity, governance, and security best practices throughout all data engineering processes.
• Monitor job performance and implement automation and alerting for data operations.
• Work with on-prem data platform.
• Collaborate with data analysts and business stakeholders to gather requirements and ensure data quality and availability.

Job Requirements

• Bachelor/Master’s Degree in Electrical/Electronic Engineering or Computer Science
• With min. 3 years of relevant experience in similar industry
• Proficient in EDA tools (Calibre, DRV, Laker, ICV) and familiar with IC Design workflow for design data extraction.
• Proficient in MongoDB, Python or Perl for data processing.
• Strong data analysis, data verification and problem-solving abilities.
• Strong communication and collaboration skills, with the ability to work effectively in a fast-paced, team-oriented environment.
• Familiar with database system such as Relational Database Management System (MySQL) and Graph database (Neo4j) is a plus.

PERSOLSingapore Pte Ltd • UEN No. 200007268E • EA License No. 01C4394 •EARegistration No. R23117785 (Lok Ding Hann)
By sending us your personal data and curriculum vitae(CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliatesto collect, use and disclose your personal data for the purposes set out in thePrivacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with thePrivacy Policy.

Job Responsibilities:

At MediaTek’s Memory Design Automation team, we work seamlessly with worldwide memory design

teams to deliver high performance, low power and small area in-house memories design kits and design

flows under advanced technology nodes. We are looking for candidate to join us as memory design

automation engineer for the delivery of robust memory and development of Memory Compiler

automation flow.

• Delivering robust memory solutions.

• Developing Memory Compiler automation flows.

• Creating behavioral, FPGA, timing, and DFT simulation models.

• Debugging and optimizing SRAM models for ASIC design flows.

Requirements:

➢ Knowledge of high performance, low power SRAM/ROM and VLSI design is an added advantage.

Experience with EDA tools will be helpful.

➢ Proficient with Perl, Shell, Python, C/C++ languages, knowledge with AI machine learning

algorithm and infrastructure is an added advantage.

➢ Good understanding of verilog syntax and its various aspects, such as behavioral, RTL and

synthesizable verilog is a must.

➢ Good understanding of liberty timing syntax.

➢ Knowledge and experience with EDA simulation tools such as VCS, NC is required.

➢ Experience with EDA tools will be helpful:

o DFT: Logicvision, Tessent, Fastscan

o Synthesis: Design compiler, Genus

o Simulation tools:VCS, QuestaSim, NC

o STA tools such as PrimeTime

EA License No. 01C4394 • RCB No. 200007268E •EA Registration • Lim Jia Jie EA Registration No. R22108969

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

The Innovation Labs team is dedicated to exploring emerging technologies and identifying new opportunities. Our mission is to propose, develop, and transform innovative ideas into production-ready solutions that drive impact across the organization.

Responsibilities:

• As an Innovation and Applied-AI Engineer, you will work on development software solutions that incorporate AI/ML/GenAI

• Proposing and prototyping new ideas through proofs of concept (POCs) and implementing end-to-end solutions that follow best practices to ensure seamless productization.

• We are looking for a talented engineer with a strong appetite for solving complex challenges. You should be proficient in software engineering—both front-end and back-end.

• Success in this role requires curiosity, open-mindedness, and a willingness to challenge the status quo. You should be able to quickly assess new technologies and decide whether to adopt, adapt, or discard them. Strong ideation skills are essential, including the ability to present, critique, and continuously improve ideas.

• You will be part of a multi-disciplinary team distributed across different geographies. Strong team spirit and collaboration skills are essential. 

Requirements:

• Bachelor's Degree or higher in Computer Science or equivalent

• At least 1 year experience in AI/ML, deep learning, or agentic AI.

• Proficiency in JavaScript, Java, Swift, or Python

• Ability to read academic papers and translate research into practical, innovative solutions.

• Experience in full-stack development and rapid prototyping using frameworks like Flask, FastAPI, or React.

• Hands-on experience with Generative AI frameworks (e.g., Hugging Face, LangChain, OpenAI APIs) and agentic AI systems.

• Familiarity with cloud platforms (AWS, Azure, GCP), CI/CD pipelines, and containerization tools.

Product area

Google's network provides services to millions of Internet users around the world.  Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale.  Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered.  We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning. 

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.  

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Build and operate Google's network.
• Focus on delivering Infrastructure capacity for Asia Pacific (APAC) region.
• Design, plan, and install support for optical transport.
• Work with executive engineers to develop approaches for keeping operational costs low through tooling and process improvements.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 2 years of experience in Dense Wave-Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience in DWDM topology and architecture with toubleshooting of DWDM systems.
• Experience in layer 1 optical transmissions systems, layer 3 routing TCP/IP, wireless networking, or network design or operations.
• Experience leveraging Large Language Models (LLMs) and AI-assisted tools to automate repetitive workflows, generate code scripts, or analyze technical documentation.
• Knowledge of fiber types and their application, physical fiber characteristics, and standard testing tools (e.g., OSA, BERT, OTDR).
• Knowledge of network transport design, equipment and infrastructure.
• Excellent communication skills.

Job Description

• Lead and perform tasks in RTL synthesis, floor planning, placement, clock tree synthesis, routing, and physical verification.
• Manage signoff activities including Static Timing Analysis (STA), EMIR, and Physical Verification (PV) to ensure tape out-quality designs.
• Collaborate with cross-functional teams (DFT, RTL, STA, Packaging) to drive seamless integration and execution.
• Plan, monitor, and execute project execution, set deadlines, track milestones, and report progress to leadership.
• Guide, mentor, and develop the team, fostering technical excellence and a collaborative environment.
• Troubleshoot and resolve design challenges, proactively communicating risks and mitigation strategies.
• Interface with EDA vendors and keep up-to-date with industry trends, tools, and methodologies.
• Prepare and deliver technical presentations, document processes, and contribute to organizational knowledge base.

Requirements

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering.
• Hands-on experience in physical design, including synthesis, PNR, STA, EMIR, and PV is a plus.
• Strong expertise with EDA tools: Synopsys, Cadence, or Siemens (e.g., Design Compiler, IC Compiler, Fusion Compiler, Genus, Innovus, PrimeTime, Voltus, Calibre).
• Proven track record of successful tapeouts for complex semiconductor products.
• Solid understanding of power, performance, area (PPA) optimization techniques.
• Excellent project management skills, including resource planning, task tracking, and team leadership.
• Strong communication and interpersonal skills; ability to present technical material and interact confidently with cross-functional teams.
• Experience leading and mentoring engineers.
• Familiarity with advanced process nodes (3nm, 2nm)

Interested candidates may apply through the application system. Shortlisted candidates will be notified.

PERSOL Singapore Pte Ltd • RCB No.200007268E EA License No. 01C4394 • EA Registration No. R23111944 (Loh Hui Ru Clara)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its local and overseas subsidiaries and affiliates to collect, use and disclose your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s health advisories and such other purposes stated in our Privacy Policy. Our full Privacy Policy is available at https://www.persolsingapore.com/policies.  If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

The Google Cloud Platform (GCP) team helps customers transform and build what's next for their business all with technology built in the cloud. Our products are developed for security and reliability, running the full stack from infrastructure to applications to devices and hardware. Our teams are dedicated to helping our customers developers, businesses, educational institutions and government agencies see the benefits of our technology come to life. As part of an entrepreneurial team in this growing business, you will play a key role in understanding the needs of our customers and help shape the future of businesses of all sizes using technology to connect with customers, employees and partners.

As a Google Cloud Platform (GCP) Outcome Customer Engineer (OCE), you will partner with a cross-functional team at Google, to drive initial and ongoing business growth for our customers, providing technical advisory, clearing blockers and ensuring they get the maximum benefit from their investment faster. You will manage and execute the deployment plan, transitioning scoped workloads into production by providing technical leadership to customers and partners. You will have a direct impact on the velocity and incremental consumption of customer workloads, leading to accelerated value realization, higher adoption, and future expansion opportunities.

Application Instructions: Successful candidates may be required to obtain or currently possess CAT2A security clearance during their employment. 

Qualifications

Job responsibilities

• Develop and orchestrate a structured, deployment plan across customer, professional services, and partner teams, onboarding the implementation team, clearing blockers, managing timelines and progress, and ensuring readiness (e.g., capacity, training).
• Employ coding, debugging, or systems design to resolve technical blockers and accelerate deployment.
• Drive and track progress of the initial and ongoing ramp of workloads, moving customers from agreement to consumption as quickly as possible. Maintain awareness of progress against the delivery plan, providing support to customers or partners during ramp, delivery, migration, or implementation phases.
• Identify expansion opportunities for new workloads within the account during project execution.
• Drive the product usage to help customers realize value on an ongoing basis and secure future agreement renewals.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 4 years of experience with cloud native architecture in a customer-facing or support role.
• Experience in deployment planning, orchestration, or change management, programming languages, debugging, or systems design.
• Experience engaging with, and presenting to, technical stakeholders and executive leaders.

Preferred qualifications

• Experience promoting technical solutions in one or more of the following areas: infrastructure modernization, application modernization, data management, data analytics, AI, networking, migrations or security.
• Experience with object-oriented programming languages (i.e. Python, Java), and using technical proficiencies to remove blockers and accelerate customer deployment.
• Experience working with product and capacity teams to resolve technical and capacity blockers.
• Experience with Google Cloud products and differentiation from competition.
• Experience in developing and deploying solutions in a fluid, digital-native environment.

Job Description:

• Responsible for cutting edge technology node’s SRAM compiler design and deliver best quality of design kit.
• Seamlessly collaborate with SRAM design and layout team to achieve highest quality of design kit delivery.
• Responsible for data analysis and platform development of memory usage big data.
• Responsible for physical verification (DRC/ERC/LVS/ANT/PERC) on SRAM compiler.
• Responsible for spice simulation on timing, power and noise on SRAM compiler.
• Responsible for QA check and development on SRAM compiler.

Job Requirements:

• Bachelor or Master Degree in Electrical and Electronic Engineering or Computer Engineering or Computer Science.
• Multi-task capability and strong self-driven characteristics to meet challenging schedule.
• Proficient  with  Perl,  Shell,  Python,  C/C++  languages,  knowledge  with  AI  machine  learning algorithm and infrastructure is an added advantage.
• Strong interpersonal skills to work with team members with multi-cultural environment
• Knowledge of high performance, low power SRAM/ROM and VLSI design is an added advantage. Experience with EDA tools will be helpful.
• Candidate with experience is preferable.

PERSOL Singapore PteLtd • UEN No. 200007268E • EA License No. 01C4394 •EA Registration No.R22109454 (Malcolm Lee Jun Hao)

By sending us your personal data andcurriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltdand its affiliates to collect, use and disclose your personal data for thepurposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, andagree with the Privacy Policy.