Total 2,002 design intern job vacancies

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Hong Ye Group Pte Ltd is a leading company in the service industry, renowned for its commitment to excellence and innovation. With a diverse portfolio that spans across various sectors, Hong Ye Group is dedicated to delivering high-quality services and solutions to its clients. The company values integrity, teamwork, and continuous improvement, fostering a dynamic and inclusive work environment that encourages professional growth and development.

Job Responsibilities:

- Assist in the preparation of financial reports, including balance sheets and income statements.

- Support the finance team in daily accounting tasks and data entry.

- Conduct financial analysis and research to support decision-making processes.

- Assist in the preparation of budgets and forecasts.

- Help with the reconciliation of accounts and ensure accuracy in financial records.

- Participate in audits and assist in the preparation of audit documentation.

- Collaborate with other departments to gather financial information and insights.

- Contribute to the improvement of financial processes and systems.

Job Requirements:

- Currently pursuing a degree in Finance, Accounting, or a related field.

- Strong analytical and problem-solving skills.

- Proficiency in Microsoft Office Suite, particularly Excel.

- Excellent attention to detail and organizational skills.

- Ability to work independently and as part of a team.

- Strong communication and interpersonal skills.

- Eagerness to learn and adapt in a fast-paced environment.

- Prior internship or work experience in finance or accounting is a plus.

- Internship period (August 2026 to December 2026)

Job benefits:

- Opportunity to gain hands-on experience in a dynamic finance department.

- Mentorship and guidance from experienced finance professionals.

- Exposure to various financial processes and systems.

- Potential for future career opportunities within the company.

- Access to company events and networking opportunities.

- Flexible working hours to accommodate academic commitments.

- A supportive and inclusive work environment.

Find Out Even More At: https://tinyurl.com/biz-operations-intern-mindflex

Office Location: 28 Sin Ming Lane, Midview City (Bright Hill/Marymount/Bishan MRT)

Quick Apply: You may send your Resume/CV to recruitment@singaporetuitionteachers.com or apply via MyCareersFuture.

Hi! Our company is looking for University/Polytechnic Interns who are able to commit for a Full-Time Internship of 3 Months & Above (longer durations preferred).

About Us:

• MindFlex Education's internship programme aims to provide internships that are fulfilling, as well as practical in real-world situations
• Our office culture is fun and encouraging. We take our work, as well as our play seriously
• We provide full-time job opportunities for interns who have excelled in their internship
• Enjoy a cosy office environment with modern facilities such as a PS5, pool table, karaoke system & more
• Close-knit team of 15-25 pax, strictly no over-time culture, no bring-work-home culture
• Attractive part-time positions ($14/Hour & above) and full-time positions available after completion of internship

Learning Scope:

Client Relations

• Take charge of handling tuition requests via Forms, Social Media Platforms & WhatsApp
• Ask clients the right questions to gather information efficiently
• Address clients' queries and concerns that they might have
• Transfer clients' requirements into a concise job-post format
• Provide after-sales service to clients (and tutors)
• Monthly check-in on existing client base for any feedback, staying connected and maintaining good relations with them

Tutor Relations:

• Broadcasting assignments via automated outreach channels (Email, Telegram, etc.) to our database of 50,000+ tutors
• Apply filters (eg. Location, Tutor Type, Qualifications) to tag each assignment to the correct target audience
• Assist in shortlisting, profiling, and marketing tutors in a way which captures the client's attention based on their needs
• Assist tutors with technical issues & application processing
• Clarification of agency's commission & policies to tutors

Business to Business (B2B):

• Take charge of MindFlex's B2B arm and work with tuition centres, government agencies & educational institutes.
• Schedule interviews (phonecall, online, face-to-face) between tutors and organisations
• Manage confirmation contracts & invoices for clients
• Provide after-sales service to clients (and tutors)

Internal Processes:

• Work with customised back-end software, specially designed to fulfil the company's business needs & improve efficiency
• Maintain cohesive inter-department and intra-department relations, ensure good customer handover between colleagues
• Take charge of designating clients to various teams (traffic control), depending on each team's existing workload
• Maintain an organised record of clients for different departments to contact and follow-up with in future

Other Administrative Or Ad-hoc Tasks Related To Marketing Or Business Development:

• Analyse company's past data, to forecast trends and assist in Business Development plans
• Creation of content and visuals, and organising data to grow the company’s online presence and improve SEO
• Participate in team huddles in strategy building for the company's operations, process streamlining, automation and new revenue streams

Key Takeaways:

• Hone fast-thinking abilities and good decision-making skills
• Build professional communication and customer service skills
• Develop confident problem-solving and mediation skills
• Learn to stay organised, meticulous and calm in a fast-paced environment
• Become an effective team-player and an independent worker
• Witness firsthand how SMEs create their own in-house software and solutions (from conceptualistion to development to usage)
• Deep involvement and familiarisation in both back-end and front-end processes of the company & industry
• Exposure to real-world data and applications, that puts theory into practice
• Last but not least, private mentoring & sharing sessions with company's founders and management (P.S. we love sharing)

Job Requirements:

• Current University/Polytechnic Student, Singaporean/PR
• Good Command of Both Written & Verbal English
• Friendly, Passionate and Energetic Team Player
• Organized and Good Administrative Skills
• Responsible and Strong Work Ethic
• Decent Typing Speed and Computer Skills
• Polite, Patient and Calm Personality

Location & Working Hours:

• Location: Sin Ming Lane, Midview City (Near Bishan/Marymount MRT)
• 4 Weekdays, 1 Weekend, 9.00am - 6.30pm
• (Working days of your choosing & mutually agreed with the company)
• Strictly No Overtime and No Bring-Work-Home Culture

Internship Allowance:

• $1,300/Month

Why Choose Us:

• Fun Company Culture and Working Environment
• Casual Working Attire, Relaxed Setting
• Close-Knit Team of 15-25 Pax
• Office with Modern Facilities (Pool Table, Playstation 5, Karaoke Set, Board Games, etc)
• Company Meals / Outings / Events / Bonding Activities
• Many of our interns have also converted to full-time & contract positions after their internship as they thoroughly enjoyed their learning experience with us
• New Bright Hill MRT at Doorstep

Application:

• Submit an e-mail application with Resume/CV to mindflex.recruitment@gmail.com with Email Title "Internship Application"
• Please ensure to include the following in Email and attached documents:

1. Earliest Available Start-Date for Internship

2. Available Duration for Internship

3. Is Undertaking The Internship for A Course Requirement, or Self-Improvement

Others:

• Shortlisted candidates will be contacted for a short interview over Zoom or Face-to-Face
• Signing of Non-Compete contract will be required upon successful selection

Our esteemed client in the Engineering Consulting industry is seeking a Civil/ Structural Engineer to join their dynamic team:

• Employment Type: Permanent
• Position: Civil/ Structural Engineer
• Location: Jurong East
• Working Hours: Monday to Friday, Office Hours
• Salary Package: Up to $4,200 + Bonus

Job Responsibilities:

• Create detailed 2D/3D models and engineering drawings.
• Prepare engineering documentation.
• Conduct feasibility assessments and technical evaluations.
• Perform research aligned with organizational objectives.
• Manage project timelines and coordinate execution.
• Ensure compliance with current industry standards and regulations.
• Perform on-site inspections as needed.
• Coordinate with multiple parties to address design and implementation challenges.
• Participate in professional development programs prepared by the company.
• Conduct technical research and support collaborative R&D initiatives.

Job Requirements:

• At least a Bachelor of Civil Engineering, Architecture, or other related discipline with minimum 1 year of similar working experience.
• Inexperienced candidates are welcome to apply as training will be provided.
• Experience in project management would be advantageous.
• Willing to travel as and when needed.
• Proficient in Microsoft Office.
• Familiar with CAD and other engineering design software.
• Having a Class 3 Driving License would be a plus.

Ready to apply? Here’s how:

• Click the APPLY button, or
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing.

Only shortlisted candidates will be notified.

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA).

Adelin Chong | EA Personnel Reg No.: R1875641

Intuit Recruitment Pte Ltd | EA License No.: 25C2793

As a NAND Reliability Product  Engineer, you will be responsible for defining, evaluating, and safeguarding the Extrinsic/Intrinsic reliability of Micron’s NAND Flash products. You will work hands‑on with large‑scale data analysis, electrical failure analysis, and cross‑functional teams to ensure robust product reliability and prevent escapes to customers.

This role offers deep technical ownership at the intersection of device physics, circuits, process technology, and product engineering, with strong visibility across development and manufacturing organizations.

Key Responsibilities

• Define and implement NAND Flash reliability test flows to assess product reliability performance and prevent extrinsic/intrinsic reliability escapes.

• Perform high‑volume statistical data analysis to evaluate NAND DPM/ intrinsic reliability risks and trends.

• Drive electrical failure analysis, including  advance characterization, to identify root causes and solution spaces.

• Develop short‑term countermeasures such as targeted stresses and screens, applying knowledge of digital/analog circuits, device physics, and process engineering.

• Qualify the product with innovative control measures to provide best in Class DPM and Cell reliability.

• Collaborate closely with Fab, NAND Technology, NAND Design, Product Development, System Development, and Quality/Reliability teams to develop solutions and enable shipment of high‑quality end products.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Support customer inquiries and provide technical insights related to product reliability.

• Drive strategic initiatives to enhance the overall reliability program and influence the direction of future product development.

Qualifications And Skills:

• Bachelor’s degree  or Master’s degree  with of relevant experience in Electrical Engineering or related field

• Knowledge in Semiconductor Reliability, NAND Technology, and Electrical Failure Analysis.

• Understanding in Design, Device Physics, Circuits,  Process.

• Strong statistical analysis, communication, and problem‑solving skills.

• Experience with application of AI tools, LLMs ,  data analysis tools (e.g., Python, JMP, Tableau).

• Strong analytical and problem‑solving skills.

• Team player and self driver.

Why Micron

Micron is a global leader in memory and storage technology, delivering HBM,DRAM, NAND,  and NOR solutions that power the world’s data‑driven AI innovation. At Micron, you’ll work on technology that matters—alongside teams that value ownership, learning, and technical excellence.

Manages production support engineering for a specific product or group of products after transfer from design to high volume production. Interfaces with design, process, test and reliability engineering to solve problems. Sustains products with cost reduction and yield improvements.

Qualifications

• Currently studying a Bachelor of Interior Design, Interior Architecture, Architecture or of equal
• Developing documentation skills
• Good analytical and problem-solving skills
• Skills in the CAD and Adobe Suite – InDesign, Photoshop, Illustrator.
• Good knowledge of Microsoft Office

Capabilities

• Overall, CAD knowledge including; ability to build a model, ability to build a floor plan, reflected ceiling plans and elevations, ability to follow correct naming conventions/ numbering
• Understanding of joinery detailing and floor plan requirements
• Knowledge of finishes and furnishings (if required)
• Complete weekly timesheets and be responsible for effective time management.
• Adhere to realistic project deadlines as assigned by the Director and Project Lead, without compromising creative flair. 

How to Apply

If you are passionate about design and confident in leading projects and working directly with clients, we would love to hear from you.

Please submit your resume and portfolio to singapore.careers@hachem.com.au

Our client, an well-established local MNC in commercial Air-Con industry is seeking for ACMV Manager (Design) Facility Manager / Operations Manager ( Commercial Building / Retail Mall ) - Salary: $ 7,000.00 to $ 9,000.00 + VB / 5 days work week

Requirements

• Degree in Mechanical Engineering or Electrical Enigneering or relevant

• At least 5 to 8 years of experience in designing and optimising efficient, cost-effective chiller plant and airside systems to support both project acquisition and delivery.

• At least 5 to 8 years of experience overseeing a team of Engineers and Technicians to run daily operation in either Industrial plant or Commercial Office or Retail shopping mall

• Experience in Regional / Asia coverage

• Strong in ACMV design, analytical, and problem-solving skills

• Mandatory certifications: BCA Energy Auditor, GMAP/GMAAP, SCEM

• Good communication, analytical skill and stakeholder management skill

• Independent, confident and leadership qualities

Others

• Salary: $ 7,000.00 to $ 9,000.00

• 5 Days work week (Monday to Friday), office hour
  

Interested candidate can send in your resume (word format prefer) to grayson.su@thetalentnetwork.com.sg

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Job Description.:

• You need to understand the management of company operations and processes. You will need data analytics to monitor performance, identify insights, and enable data-driven in the company. You will be required to participate in the management of project processes and project timelines.

• Perform detailed scoping of the project by working closely with all functional leads – including the alignment of the workstream’s outcome, responsibilities, task lists and timelines.

• Delegating on behalf of the manager.

• Weighting in on decision-making processes by presenting reasonable, fact-based points of view.

• Carrying out specific projects or tasks as instructed by the manager.

• To handle any related administrative tasks.

Requirements

· Proficiency in MS Office (Word, Excel, Outlook and PowerPoint).

· High level of interpersonal skills in handling sensitive and confidential situations and documents.

· Proven ability to manage flexible schedules.

· Minimum 3-years management executive work experience in Singapore.

· Diploma and Bachelor’s degree in Business Management and Administrative Support are preferred.

The intern will have the exciting opportunity to support the team in one or more digital transformation and automation projects to create Bots/ implement RPA to enhance and streamline the Career Conversion Programme Workstreams.

This role provides hands-on experience in process improvement methodologies. He/she will learn the fundamentals of automation design, stakeholder engagement, and digital solution development whilst gaining valuable exposure to government operations and process optimisation.

Responsibilities include:

A) Knowledge Management (KM) System Development

- Design and implement a KM repository using available digital tools.

- Support the team to develop processes and workflows to gather, curate and maintain the struture for the KM system.

- Assist in creating documentation and user guides for KM processes and tools.

B) Automated Budget Tracking Solutions

- Implement RPA to enable efficiency in budget tracking.

- Engage stakeholders to understand budget tracking requirements.

- Design and test the automated solutions that enhance accuracy, reduce processing time, and improve financial oversight.

C) AI-Powered Digital Proposal Assessment Tool

- Develop bot capable of evaluating and scoring proposals using advanced algorithms and criteria to assess proposals

- Collaborate with stakeholders to understand painpoints and improvement opportunities in current proposal development process

- Work with divisions to develop bot to drive efficient proposal evaluations

Requirements:

- Strong analytical and problem-solving skills

- Excellent attention to detail and organisational abilities

- Proficiency in MS Office suite (include SharePoint), RPA and AI tools

- Good written and verbal communication skills in English

- Experience with data visualisation tools e.g. PowerBI is a plus

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

Responsibilities:

• In charge of establishing the process and work in the team to implement risk management best practices in projects
• Implement and maintain the office's ISO 13485 and IEC 62304 compliant quality management system processes and procedures across departmental work and projects.
• Responsible in providing guidance and development support to the projects handled
• Taking charge of validating and advising project teams on regulatory, quality and risk requirements
• In charge of implementing and maintaining ISO 13485 and IEC 62304-compliant quality management system processes and procedures
• Responsible in
• In charge of managing project tasks which includes ensuring of timely completion of project milestones and meeting KPIs
• In charge of compliance with quality, regulatory and organisational policies and systems while supporting required record-keeping and documentation.

Requirements:

• Min Degree in Engineering /Science or relevant
• Min 2 years of working experience in QMS, Risk Management and design & development in medical industry
• Experience in ISO13485 /IEC62304 audit is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Design and Build Service Provider
• Position Title: 3D Designer (Commercial / Event)
• Working Location: North - Admiralty
• Working Hours: 5.5 days / Mon-Fri: 9am-6pm, Sat: 9am-1pm
• Salary Package: Up to SGD 4000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Work closely with the creative team, sales personnel, and project owners/managers to conceptualize and design engaging and impactful experiences
• Oversee the entire design process from initial concept to final execution, transforming ideas into visually compelling and functional 3D designs
• Produce high-quality 3D renderings that clearly convey design intent and storytelling
• Apply strong knowledge of design principles, spatial planning, and user experience to develop immersive environments tailored to target audiences
• Stay updated on industry trends, emerging technologies, and best practices to deliver innovative and forward-thinking design solutions
• Participate in client presentations, effectively communicating design ideas and incorporating feedback to refine and enhance outcomes
• Collaborate with cross-functional teams including graphic designers, technical consultants, and draftsmen to ensure cohesive integration of all design elements

APPLY NOW!!!

• Min. Diploma in 3D design, industrial design, architecture, or a related field
• Min. 2 years of experience in 3D design with a strong portfolio highlighting outstanding spatial and exhibition design work
• Proficiency in industry-standard design software, including but not limited to, AutoCAD, SketchUp, Adobe Creative Suite, Rhino, V-Ray, and other relevant tools
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #79386 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

State Street Corporation is committed to fostering an environment that promotes diverse talent and global perspectives. Our Internship Platform is an integral part of our commitment to equity and inclusion by providing outstanding internship opportunities to students across our core university partnerships. Our Internship is an experiential learning initiative, designed to provide students with an opportunity to explore the dynamic culture and lively, academic atmosphere of our Markets business lines. Additionally, you’ll be provided with opportunities to undertake additional projects to broaden your understanding of the global financial markets and the clients we serve.

Program Overview

• Intern experience will include a welcome orientation to provide our newest colleagues with a comprehensive view of business lines across Markets. In addition, multiple training sessions and networking opportunities will be offered, where you’ll experience our commitment to State Street’s most valuable asset: our employees.

• Our Interns will receive continuous training and will benefit from working alongside experienced professionals on meaningful projects. Multiple opportunities will be on hand to exchange ideas and network with peers, mentors and senior leaders of the firm.

• As an intern, you will have the unwavering support of a mentor who can help you navigate the workplace and ensure you are best positioned for success

Why this role is important to us

GlobalLINK has a long history of innovation and industry leadership. As we enter the next phase of our evolution, our focus is on strengthening our leadership in the FX trading platform market while expanding our client footprint and delivering greater value‑added solutions to our existing clients. GlobalLINK is a part of State Street Markets. When owners and managers of institutional assets need research, trading, securities lending and innovative portfolio strategies, they turn to State Street Markets business unit. As our investment research and trading arm, State Street Markets’s number one goal is to enhance and preserve our clients’ portfolio values by applying technology, optimizing trading, and linking asset classes and markets across the world.

Who we are looking for

In this role, the candidate will support the GlobalLINK team in achieving its business objectives by contributing to regulatory and management reporting, driving project delivery, collaborating with stakeholders across functions, and ensuring the timely execution of key initiatives.

The candidate should be intellectually curious, eager to learn and grow, self-motivated, adaptable, and ready to take on new challenges. The role will also provide opportunities to develop and strengthen the following skills:

• Strong problem-solving ability and confidence to ask challenging questions

• Sound judgment and strong business acumen

• Excellent communication and interpersonal skills

• A keen interest in Global Markets, particularly in FX markets, Trade Cost Analysis, Money Markets Funds, etc.

• Drive to succeed and a strong work ethic

• The ability to learn quickly, multitask, prioritize, and take on new responsibilities

Responsibilities
As an intern, your responsibilities may include:

• Assist and participate in different project initiatives

• Coordinate with teams across different functions

• Support automation of reports using excel or internal tools

• Identify workflow inefficiencies and propose process improvement

• Handling day-to-day activities needs

Qualifications

• Candidates are required to pursue a bachelor’s degree from an accredited college or university

• 3.2 minimum GPA preferred

• Background in Business Management, Machine Learning or Programming is a plus

• Strong interpersonal, organizational, critical thinking, and problem-solving skills 

About State Street

What we do. State Street is one of the largest custodian banks, asset managers and asset intelligence companies in the world. From technology to product innovation we’re making our mark on the financial services industry. For more than two centuries, we’ve been helping our clients safeguard and steward the investments of millions of people. We provide investment servicing, data & analytics, investment research & trading and investment management to institutional clients.

Work, Live and Grow. We make all efforts to create a great work environment. Our benefits packages are competitive and comprehensive. Details vary in locations, but you may expect generous medical care, insurance and savings plans among other perks. You’ll have access to flexible Work Program to help you match your needs. And our wealth of development programs and educational support will help you reach your full potential.

Inclusion, Diversity and Social Responsibility. We truly believe our employees’ diverse backgrounds, experiences and perspective are a powerful contributor to creating an inclusive environment where everyone can thrive and reach their maximum potential while adding value to both our organization and our clients. We warmly welcome the candidates of diverse origin, background, ability, age, sexual orientation, gender identity and personality. Another fundamental value at State Street is active engagement with our communities around the world, both as a partner and a leader. You will have tools to help balance your professional and personal life, paid volunteer days, matching gift program and access to employee networks that help you stay connected to what matters to you.

State Street is an equal opportunity and affirmative action employer. Discover more at StateStreet.com/careers