Total 4,932 Maintenance / Repair job vacancies

The Services required are set out as follows:

 Conduct daily routine inspection for building/M&E facilities work.

 Ensure Contractor complies with security and safety requirements for

corrective and preventive maintenance works.

 Daily operational M&E activities, including ACMV, Genset, UPS, LT

Switchgears, Alarm System, Access Card System, Fire Protection

System, Water Supply and Drainage System, PA System, laying and

installing electrical cables and miscellaneous electrical appliances.

 Attending to technical-related interior works and faults, including

furniture, carpets, walls/fittings, ceiling and doors/glass doors.

 Daily inspection of systems, facilities and conducting essential

equipment checks and meter readings.

 Assist and supervise vendors and contractor services in the premises

relating to corrective maintenance, planned preventive maintenance

and vendor briefings.

 Assist during project work and internal moves, adds and change

activities.

 Assist in Annual Power Shutdown activities such as Fire Certificate

Renewal, etc.

 Respond to System Alarms and deal with emergency situations.

 Assist IT Department in some technical hand on tasks.

 Write daily reports, incident reports, assist to analyze the root cause

of incidents and key in work order request forms into excel sheet.

 Any other duties assigned by Head of Operations.

Responsibilities:

- Perform equipment assembly according to engineering. drawings

- Assist in receiving and checking of incoming part.

- Support troubleshooting of equipment.

- Perform equipment installation at Customer site locally and overseas.

Requirements:

- SPM or Nitec in Mechanical or Electrical engineering.

- Able to read technical drawing

- Familiar with common hand tools used in Assembly

- Familiar with simple inspection equipment like Micrometer and Vernier calipers.

- Possess interest in mechanical and/or electrical assembly of automated equipment.

- Able to travel on short notices

- Conversant in English and Mandarin(To Communicate with designer team - Mandarin speaking) would be desired

About the Role:

• Assist the Facilities Manager in the daily operations.

• Deputize as and when required if the Facilities Manager is not around.

• Manage the team of technical officers, sub-contractors, supervise & coordinate facility management activities and ensure all works adhere to legal regulations.

• Attend to any cases raised including after hours by the Client which includes the tenants where applicable.

• Preparation of monthly and incident reports pertaining to the site(s).

• Ensure smooth operations on site(s).

• Manage ad-hoc project(s).

• Facilitate incident investigation whenever necessary.

About You:

• At least Diploma in Electrical / Mechanical /Building/ Facilities Management from a recognized polytechnic with a minimum of 3 years of relevant work experience.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;

• Career development and a promote from within culture;

• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Support New Product Introduction (NPI) execution activities in MSB Assembly Cleanroom (CR1/CR2/CR3) to ensure timely, safe, and compliant execution of NPI builds, from lot release through AOut, by coordinating daily execution, tracking issues, and supporting engineers, CEM, IPPC, and manufacturing teams. 

Key Roles & Responsibilities 

1. NPI Execution Support (Core Responsibility) 

• Support daily NPI lot execution across Assembly CR1/CR2/CR3 (Die Attach, Wire Bond, Encapsulation, Laser, Singulation, etc.). 

• Monitor NPI lots status (WIP, holds, rework, conversion, disposition) and highlight risks to NPM / Process / Equipment / CEM. 

• Assist in expediting NPI lots to meet AOut, MAD, MCD, and customer commitment dates. 

• Track build readiness (material availability, tooling, DID, recipe, conversion readiness). 

2. Daily Operations & Issue Tracking 

• Support daily shift execution by tracking:  

• Tool readiness / downtime impact to NPI 

• Conversion issues (recipe mismatch, DID gaps, tooling mismatch) 

• Process abnormalities, yield issues, and holds 

• Help prepare and update daily execution trackers, WIP lists, and action logs. 

• Escalate execution blockers promptly to responsible owners. 

3. CrossFunctional Coordination 

• Work closely with:  

• NPI / NPM engineers 

• Assembly Process & Equipment Engineers 

• CEM / IPPC / Manufacturing teams 

• Planning and Test NPM 

• Support interteam communication to ensure correct priorities for NPI lots. 

• Assist in coordinating shift handover information for NPI execution continuity. 

4. Documentation & System Support 

• Assist in:  

• Updating NPI build information in Omelek / ATPEA / SAP / internal trackers. 

• Verifying correct process flow, routing, and disposition rules are applied. 

• Support preparation of basic reports, summaries, and status updates for NPI reviews. 

• Ensure documentation completeness for NPI execution (build notes, deviations, followups). 

5. Compliance, Safety & Quality 

• Ensure NPI execution follows MSB Assembly specifications, safety rules, and cleanroom protocols. 

• Support engineers during process deviations, ensuring proper escalation and documentation. 

• Assist in monitoring hold lots, expired materials impact, and qualityrelated alerts affecting NPI. 

Required Qualifications 

• Nitec/Higher Nitec/Diploma in Engineering (Manufacturing, Mechanical, Electrical, Industrial, or related). 

• 0–3 years experience in semiconductor assembly, manufacturing, or operations support. 

• Familiarity with cleanroom operations is an advantage. 

• Basic knowledge of NPI flows is preferred. 

Key Skills & Competencies 

• Strong execution focus and sense of urgency. 

• Good communication and coordination skills across teams and shifts. 

• Ability to track multiple lots and priorities in a fastpaced environment. 

• Comfortable working with manufacturing systems and trackers (SAP, dashboards, Excel). 

• Willingness to support shiftbased or extended hours when NPI execution requires. 
  

  Supports engineering activities such as design, test, check-out, modification, fabrication, and assembly of prototype electro-mechanical systems, experimental design circuitry, or specialized test equipment. Applications may include analog, digital and/or video circuits and logic systems. Works from schematics, diagrams, written, and verbal descriptions, layouts or defined plans to perform testing, checkout, and trouble-shooting functions. Performs operational test and fault isolation on systems and equipment. Assists in determining methods or actions to remedy malfunctions. Assists in the design, construction, test, and check-out of test equipment. Uses manufacturing, test, development, or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators, and specialized test apparatus.

Job Description

Responsibilities

• Review client technical documents, specifications, and project requirements
• Define ICA engineering scope and requirements for assigned projects
• Prepare and evaluate technical documents for instrumentation and control system procurement
• Provide senior technical support to project teams during engineering, construction, and commissioning phases
• Optimize ICA system designs for cost, reliability, maintainability, and compliance
• Prepare and review specifications for instrumentation, DCS, PLC, SCADA, ESD, and Fire & Gas systems
• Develop and review control philosophies and functional analyses (Control, ESD, F&G)
• Implement and verify instrumentation detail design on P&IDs
• Prepare and review instrument data sheets, loop diagrams, and hook‑up drawings
• Oversee detailed engineering activities including layouts, cabling, routing, and supports
• Plan, conduct, and witness FAT, SAT, and testing & commissioning activities
• Design, develop, and implement PLC and SCADA systems
• Coordinate with multidisciplinary teams and support junior engineers
• Perform other duties as assigned by Management

Requirements

Qualifications

• Bachelor’s Degree in Instrumentation, Control, Automation Engineering, or related discipline

Experience

• Minimum 5 years’ relevant experience in ICA engineering within energy, utilities, or infrastructure projects
• Experience in power, water/wastewater, or renewable energy projects is preferred

Technical Skills

• Strong experience with DCS, PLC, SCADA, ESD, and Fire & Gas systems
• Proficient in P&IDs, loop diagrams, instrumentation specifications, and control system architecture
• Knowledge of local standards, service providers, and solutions related to water and wastewater treatment
• Hands‑on experience with FAT, site testing, and commissioning

Soft Skills

• Strong analytical and problem‑solving skills
• Good communication and stakeholder management abilities
• Able to work independently and lead within project teams
• Strong focus on quality, safety, and compliance

Key Responsibilities:

• Carry out gas meter replacement works (residential/commercial/industrial)
• Perform installation, removal, and testing of gas meters
• Conduct leak checks and ensure safe commissioning
• Carry out minor piping modifications (for LGSW-F)
• Ensure compliance with safety procedures and standards

Requirements:

• Valid LGSW-R or LGSW-F certification
• Relevant experience in gas installation or maintenance
• Ability to work outdoors and travel islandwide

Preferred:

• Experience in meter replacement projects
• Knowledge of gas safety regulations

Location: Tuas Area

• Oversee preventive and corrective maintenance of building systems (electrical, plumbing, HVAC, ACMV, etc.).

• Maintain comprehensive records of repairs, inspections, and servicing activities.

• Support the application and renewal of statutory licenses (NEA, BCA, etc.).

• Liaise with external vendors for repairs, cleaning, and specialized services.

• Monitor service contracts to ensure vendors meet agreed standards.

• Coordinate the setup and termination of utilities (SP, telecoms, etc.).

• Coordinate crane and equipment servicing and maintenance schedules.

• Arrange pest control services to uphold hygiene standards.

• Handle lift renewal matters on the BCA LEAP website.

• Handle Land Transport Authority (LTA) fines and related matters.

• Manage the renewal of season parking, Vehicle Parking Certificates (VPC), and road tax for company vehicles.

• Manage the renewal of building and vehicle insurance policies.

• Manage tenancy agreements for office, site, and dormitory.

• Support signage and banner installation, ensuring site readiness.

• Coordinate fire drills, emergency preparedness activities, and security measures.

• Arrange safety courses and training sessions for workers to comply with regulations.

• Support manpower and resource allocation, including scheduling work shifts and overtime for workers.

Key Responsibilities:

• Assist in installation and removal of gas meters
• Support site setup, tools handling, and basic works
• Follow safety procedures and instructions from team lead
• Assist in minor restoration works (cabinet, fittings, etc.)

Requirements:

• Physically fit and willing to work outdoors
• Basic technical or construction experience preferred
• Team player with good attitude

Job Responsibilities:

• Ability to carry out repair and modification on aero engine components, manufacture the aero engine spares in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to repair the aero engine components or fabricate the aero engine spares according to the engineering drawing of Rolls-Royce Engine Manuals

• Setting up, operating, and maintaining of 5-axis CNC Milling machine

• Familiar in usingdifferent measuring equipment for dimensional inspection

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Cutting tools storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of 5-axis CNC Milling Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Proficient in SolidWorks or Mastercam is an advantage

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out repair and modification on aero engine in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to machine the aero engine components according to the engineering drawing

• Setting up, operating, and conducting routine machine maintenance of CNC EDM Machine

• Monitoring the machining process to ensure quality

• Performing quality inspections of finished products

• Troubleshooting any issues that arise

• Familiar in using different precision measuring instruments for dimensional inspection

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Electrodes storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of CNC EDM Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Lead Lab Technician to be part of their team for ongoing transformation projects.

This is a 1 Year contract (Convertible) role. They are located at Buona Vista – Walking distance from the MRT station.

5 days work week - Monday to Friday (8.30 am to 5.30pm)

Training will be provided for Entry Level (structured training programs)

Duties

• Prepare samples and reagents
• Operate sample handling equipments
• Ensure data accuracy and detail records
• Adhere to safety procedures
• Any other duties as assigned by supervisor.

Requirements

• Diploma in Applied Chemistry/Perfumery and Cosmetic Sciences/Chemical Engineering
• 1-2 years of relevant working experience in a chemistry laboratory environment
• Experience in supervisory positions

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: tc1@recruitpedia.sg

Attention to: Alethea

EA License No: 19C9682
Reg No: R21101676
Ng Zhi Qing Alethea

Job Responsibilities:

• Ability to carry out Superfinishing (also known as Vibropolishing or Vibrobarrelling) of aero engine blade and vane airfoils using non-metallic media to produce a fine surface finish in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Ability to make-up and control of Superfinishing Media

• Setting up and operating the Vibro-Polishing Machine

• Monitoring the machining cycle to ensure quality

• Familiar in using different precision measuring equipment for chordal width, trailing edge thickness measurement

• Familiar in checking the surface finish using suitable surface finish measuring machine

• Performing quality inspections of finished products

• Conducting routine machine maintenance

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Vibro-Polishing machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to conduct Shot/Glass Bead Peening tasks in accordance with National Aerospace and Defense Contractors Accreditation Program (NADCAP) requirements & Rolls-Royce instructions

• Ability to make-up and media control for Shot, Glass Bead Peening

• Executing programs to carry out shot/glass bead peening on the aero engine components according to the Repair Scheme requirements

• Setting up, operating, and conducting routine machine maintenance of Shot/Glass Bead Peening Machine

• Performing inspections of peened surfaces for uniform coverage according to the Repair Scheme requirements

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in Shot/Glass Bead Peening machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

Job Description & Requirements

1. Manage overall operations and is responsible for the effective and successful management of labor, productivity, quality control and safety measures as established and set for the Operations Department
2. Report to the Area Operations Manager on all operational, administration and HR matters, planning and implementation of projects and activities, recruitment, training and development of team, customers feedback and overall market environment
3. Possess great communication and organisational skills, with strong leadership skills to lead and motivate team members to perform and exceed customers’ expectations and needs.
4. Implement training plan/program/SOP/WSH, to build core competencies and skills of team members
5. Liaise and work closely with clients and business partners, understanding their preferences and expectations
6. Able to liaise and communicate with China workers
7. Possess a Class 3 driving licence
8. 2 to 3 years’ experience in a supervisory or managerial role in housekeeping and/or hospitality industry will be an advantage

We are a cleaning services company which specialize in cleaning and maintenance services for offices, hotels, condominiums, shopping centres, supermarkets, food courts, discotheques, etc. and providing dish washing and kitchen cleaning services for food courts, hotels and restaurants