Total 114 technical support engineer job vacancies in Penang

• Lead, manage and take ownership on the overall operational health of the HVAC and Mechanical system
• Maintain, operate all HVAC systems and associated equipment, plumbing systems, building management system, and equipment repairs
• Manage capacity and design changes according to the requirements from manufacturing/customers
• Conduct and execute facility system improvements on reliability hardening, safety performance as well as cost optimization and reduction
• Perform facility inspections and report on condition affecting operations.
• Monitor and supervise HVAC preventive maintenance outsource service contracts
• Maintain compliance to local city and state government requirement and overall country legal legislation, ordinances and codes of practices.
• Liaison with relevant local government agencies and contractors
• Engage and liaison with consultants on mechanical system design and construction.
• Respond to emergencies.
• Comply with all safety procedures, practices and requirements
• Support any afterhours building needs and activities as required
• Attend training sessions and seminars and other assigned tasks as requested.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

1. To establish the operation procedure, system monitoring & repair maintenance of responsible sections.
2. To review & analyze the operating data to optimize the Facilities operating system
3. To support production / manufacturing needs and request
4. To team up with all the facilities peers & contractors in troubleshooting the Facilities system
5. To identified & drive the cost saving & improvement program
6. To supervise contractor engineer and technician, routine job to ensure the HVAC & Mechanical system supporting production comply to specification and government regulation
7. Manage Mechanical System for multiple Plants.
8. To plan, organize, execute & control for the specific project
9. To ensure compliance to IMS requirement, Contamination Control, 5S & Safety
10. To liaise with contractor, consultant on the facilities related matters
11. To coordinate the major plan shutdown maintenance
12. To carry out special task as assigned by supervisor
13. To support the activities to the company needs

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

We are looking for experienced Reliability Engineer to join the Global Reliability Lab team. Supporting products qualification from development through high‑volume manufacturing. In this role, you will play a key part in defining reliability strategies, leading qualification activities, investigating failures, and driving long‑term product robustness.

You will work closely with cross‑functional teams including Design, Test, Failure Analysis, Manufacturing, Quality, and Suppliers to ensure our products meet stringent reliability, customer, and industry standards.

Key Responsibilities

• Execute reliability qualification plans for electronic components, and modules.
• Develop test strategies including HTOL, HAST, THB, TC, HTSL, PTC and mechanical stress tests.
• Review test results, analyze failures, and provide clear conclusions and recommendations.
• Assess risks related to new technologies, new materials, and new manufacturing processes.
• Ensure compliance to relevant JEDEC, IEC, MIL, IPC, and customer-specific standards.

As a Principal Equipment Engineer specializing in sputter media manufacturing, you will serve as the technical authority and strategic leader for sputtering equipment, manufacturing technology, and engineering innovation within the organization. You will lead advanced equipment engineering initiatives, drive long-term technology roadmaps, and provide expert-level support for equipment reliability, manufacturing excellence, and next-generation HDD product development. This role requires strong technical expertise in sputtering systems, vacuum technology, automation, and advanced manufacturing processes, along with the ability to influence cross-functional organizations, mentor engineering teams, and lead large-scale strategic projects across multiple manufacturing areas.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead strategic equipment engineering initiatives to improve equipment reliability, manufacturing efficiency, OEE performance, and long-term operational sustainability.
• Lead complex equipment troubleshooting and advanced root cause analysis for critical manufacturing issues, implementing robust corrective and preventive actions.
• Develop and standardize best-in-class engineering practices, maintenance strategies, and equipment performance optimization methodologies across manufacturing operations.
• Lead major equipment upgrades, system redesigns, automation integration, and machine conversion programs to enhance manufacturing capability and productivity.
• Provide technical leadership for new equipment development, factory expansion projects, equipment qualification, commissioning, and production ramp activities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, Quality, Facilities, and Global Engineering teams to achieve manufacturing and technology objectives.
• Drive predictive maintenance, reliability engineering, and data analytics initiatives using SPC, equipment monitoring systems, and advanced failure analysis techniques.
• Lead engineering evaluations for new technologies, automation solutions, AI-driven manufacturing applications, and Industry 4.0 initiatives to improve operational performance.
• Establish equipment standards, technical specifications, engineering governance, and operational guidelines to ensure consistency across manufacturing operations.
• Provide expert guidance in vacuum systems, plasma generation, sputtering processes, automation controls, robotics, and equipment architecture optimization.
• Lead supplier technical engagements, OEM partnerships, and external engineering collaborations to support technology development, equipment enhancement, and problem resolution.
• Mentor and develop engineers, technical specialists, and engineering leaders by strengthening technical competencies, leadership capabilities, and knowledge-sharing culture.
• Drive cost reduction initiatives through equipment optimization, spare part management, energy efficiency improvements, and operational excellence programs.
• Lead engineering reviews, failure analysis discussions, and technical presentations for senior management and global engineering organizations.
• Ensure compliance with all safety regulations, company policies, environmental requirements, and industry standards related to equipment operation and engineering activities.
• Promote continuous improvement culture through Lean Manufacturing, Six Sigma methodologies, and engineering innovation programs.

The Junior Managers Program (JMP) is Bosch’s accelerated development program designed to prepare high‑potential engineers for future technical and leadership roles.

The Automation & Smart Manufacturing track focuses on developing future leaders in automation, robotics, digitalization, and Industry 4.0, through hands‑on projects, cross‑functional rotations, and strong mentorship.

What’s in store for you?

• Rotate across Technical Functions (TEF) and Manufacturing with a strong focus on:
  • Automation & Robotics Engineering
  • Manufacturing / Production Engineering (automation focus)
  • Industrial Engineering & Process Optimization
  • Digitalization, MES, and smart factory initiatives
• Lead and support automation projects from concept, feasibility, to implementation
• Contribute to productivity improvement, cost reduction, and safety through automation
• Support industrialization and ramp‑up of automated production lines
• Work closely with manufacturing, engineering, and global automation teams
• Build leadership, communication, and project management capabilities through real business ownership

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

BROAD FUNCTIONS :

· To plan, coordinate and follow-up sputter systems start-up / conversion activities and process

documentation.

· To audit sputter parameters and practice periodically, include online SPC and procedure

conformance.

· To lead sputter process related issues trouble shooting (common causes), work closely with shift

process team in sputter process sustaining, trouble shooting & improvement in order to achieve

sputter utilization (down time), yield & quality goal.

· To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which

include new products/machines/process qualification.

· To lead, supervise and coach/train process tech, include engineering specialist and characterize

technicians.

RESPONSIBILITIES :

Regular

· Responsible for sputter process related issues trouble shooting (common causes), work closely

with Shift process team in sputter process sustaining, trouble shooting & improvement in order to

achieve sputter utilization (down time) & quality goal.

· Responsible to lead, supervise and coach/train process tech, include engineering specialist and

characterize technicians. Responsible to train and share PMR/DS sputter process and yield

improvement knowledge with the team.

· Responsible for sputter parameters monitoring, include online SPC monitoring and procedure

conformance.

· Responsible for sputter machine start-up include process characterize (new products & process

changes).

· Responsible for new products/machines/process qualification.

· Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).

Others include FMEA.

· Understand and accept responsibility for performing jobs safely

· Follow safety and health rules

· Responsible to assist in sputter yield related issues trouble shooting (common causes). Work

closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order

to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.

· Other supervisor assigned task

Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization. Responsible for new product qualifications.  

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

Job Summary

• We are seeking a highly skilled Senior Failure Analysis Engineer to join our team and drive advanced failure investigation in cutting-edge technologies, including AI-related products. Be part of a high-impact engineering team solving real-world reliability challenges

Key Responsibilities:

• Perform failure analysis at both physical package and die levels, identifying root causes and recommending corrective actions.
• Lead electrical fault isolation using advanced techniques & tools.
• Develop and execute bench-level test applications to validate hypotheses and reproduce failure mechanisms.
• Interpret CAD layouts, schematics, and design documentation to support failure root cause determination.
• Collaborate cross-functionally with design, process, product, and reliability teams to resolve complex technical issues.
• Support analysis for advanced technologies and AI-related products.

Job Description

• Lead cross-functional teams across Design, Systems, Validation, Product/Test Engineering, Firmware, Supply Chain, Procurement, and Quality to ensure seamless program execution in NPI projects.
• Lead COGS reduction programs from impact assessment through qualification, PCN, safelaunch, and production ramp – quantifying savings, evaluating ROI, and assessing the business impact of schedule slips and risk scenarios.
• Drive capacity expansion initiatives across global manufacturing sites, aligning engineering, operations, and supply chain to support production scalability.
• Build and manage detailed schedules for NPI, COGS and capacity programs; track progress, remove roadblocks, and implement data‑driven mitigation plans.
• Manage Engineering Build Request prioritization, conducting bi‑weekly reviews with PMO and Business Operations leadership to ensure alignment with organizational priorities.
• Act as a liaison between the product group, operations/supply chain teams, and key OSAT interface teams to ensure alignment, clarity, and seamless execution across all stages of the program.
• Drive sample readiness and ramp readiness, ensuring cross‑functional teams maintain schedules that support committed customer delivery timelines.
• Coordinate and conduct Project Gate reviews, ensuring cross‑functional readiness, milestone alignment, and clear communication of risks and dependencies.
• Oversee wafer fab, assembly, and test operations to ensure timeline adherence, cost efficiency, and quality standards across programs.
• Provide structured leadership updates on program status, risks, and mitigation plans, maintaining accurate schedules and qualification documentation.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management. 

1. Planning of assembly processes flow considering manufacturing efficiency. Collaborate
with project team to seek and strive for minimizing product cost through design and
process optimization.
2. Support in the RFQ calculation; calculate and provide investment needed for standard
assembly process modules.
3. Define equipment specification in accordance to product specification. Plan, purchase
(with supervision), setup and release manufacturing cells on time, at budget and with
desired requirement.
4. Involve in each project stages to evaluate equipment and process performance.
Formulate technical and/or performance reports by collecting, analyzing and
summarizing information and trends.
5. Identify and establish process specifications, maintenance strategies and other
manufacturing documents required for line release activity.
6. Conduct problem solving methodology in assembly processes and equipment. In
meantime also developing troubleshooting guide and training of technical know-how to
technician.
7. Actively participate in system CIP on value disposition as in S-Q-C-D (Safety, Quality,
Cost & Delivery).
8. Provide effective countermeasure in technical flaw encompassed with corrective and
preventive action plan.
9. Study, evaluate and improve the technical capacity and capability in assembly
processes accorded to customer’s demand.
10. Continuously strive for higher and sustainable OEE, FPY, MTTR, MTBF.
11. Emphasize the intensity of team work culture in VSO (Value Stream Organization)
moving towards operational excellence.
12. Any other duties assigned by immediate superior from time to time.

Our team is looking for a talented, motivated, and high-performing Senior Sales Engineer / Sales Manager to join our team. He/She is responsible for prospecting for new business, upselling, and cross-selling within our extensive install base, as well as delivering results against a quota. The ideal candidate will possess strong sales, interpersonal, and organizational skills. They should be comfortable with multitasking and be able to budget their resources in order to meet the assigned quotas for their role.

• Develop and implement sales strategies in Malaysia

• Meet with customers to understand their requirements and propose tailored solutions

• Prepare and deliver proposals including pricing, shipment timelines, and product details

• Manage and grow key accounts while developing new customers to drive sales revenue

• Collaborate with channel partners and internal technical teams to ensure customer satisfaction

• Track sales activities, forecast revenue, and report performance to SEA Sales Team Lead

• Serve as the main point of contact for customer issues, coordinating with support teams as needed

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Job Description

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives