Total 18,068 mechanical engineer job vacancies in Hong Kong

RESPONSIBILITIES / AUTHORITIES:

Main duties

1. As a Technical Controller’s representative in charged for Project Planning in term of moulds, machinery and manpower;
2. Plan for mould set up in production line to ensure that production bays meet the daily/ monthly targeted volume;
3. Liaise with the design team for shop drawing approvals;
4. Interpret drawings and solving discrepancies with Design team;
5. To issue daily planning schedules to General clerk to be uploaded in ERP system and issue to Production Team;
6. Arrange / purchase of material for production of precast components;
7. Plan monthly/ weekly production and delivery schedule, material ordering, manpower and machinery arrangement;
8. Prepare and maintain all production and inventory records to ensure sufficient buildup of stock as per Project’s requirement;
9. Carry out pre-pour and post-pour inspections;
10. Close and manage non-conformance reports (NCRs) and corrective actions;
11. Analyze root causes of quality issues and implement corrective/preventive actions;
12. Investigate and correct any discrepancies between physical stock and system records;
13. Monitor and ensure the materials wastage are within the targets;
14. Attend and solve Client’s complaints;
15. Monthly site visits or as when it is required for defects highlighted by Clients;
16. Brief Production & Mould team on the site defects and submit reports on correction actions take;
17. Attend all EHS walkabout, inspection, meetings and contribute to a safe working condition / environment;
18. Perform any other tasks which may be assigned by management from time to time;
19. For senior post, he/she should be good in leadership and mentorship.

RESOURCE REQUIREMENTS

1. Minimum 5 years’ experience in Concrete Precast manufacturing Industry
2. Minimum with Degree in Civil / Structural Engineering
3. Computer literate, preferable in Microsoft Office applications or equivalent

Perks & Benefits

• Bonus
• Allowance
• Casual dress code
• Medical insurance
• Personal development opportunities
• Paid training and development

需具備電機工程、電子工程或相關專業的資格證書。

擁有樓宇自動化的經驗者優先考慮。

資料中心監控系統的實施

人機介面三維圖形設計

資料中心站點的維護

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 彈性的工作時間
• 休閒著裝要求
• 個人休假
• 開放文化
• 個人發展機會
• 遠距辦公的彈性

工作職責：

• 協助專案規劃、協調和執行。
• 監控專案進度，確保工程按計畫進行。
• 與顧問、承包商和相關各方聯絡
• 參加現場會議並撰寫報告
• 確保符合專案規範和安全要求

職位要求：

• 土木工程、施工管理或相關領域的學位/文憑
• 至少2年相關工作經驗。
• 具備 AutoCAD 和 MS Office 的基本知識
• 良好的溝通協調能力
• 責任感強，積極主動，並且樂於學習
• 附加資訊：
• 自備交通工具，並願意前往工地（如有需要）。

福利待遇

• 支持性、協作性和積極性的工作環境。
• 公司穩定，提供長期的職涯發展機會。

職責和權限

• 開發 C# 應用程序，用於編程和整合 PC/PLC 控制系統——包括運動控制、視覺和機器人技術。
• 使用 C# 進行機器軟體整合、調試和效能測試，以保持最佳運作狀態。
• 根據需要提供現場服務支持，以解決技術問題。
• 支援客戶相關請求，包括新軟體版本的開發、現場安裝和升級。
• 執行管理層認為必要的其他工作。
• 遵守 ISO 的所有要求（包括管理層批准的所有標準），並遵守本公司提供的一般安全規範、標準作業程序、工作指導、政策和指南。

要勝任此職位，您需要具備以下條件：

• 最低學歷要求為軟體工程、電機與電子工程、電腦科學或相關專業的專科或本科以上學歷，或具有兩年以上相關領域工作經驗。
• 精通 C# 程式設計是必備條件。
• 具備紮實的PLC程式語言和電氣知識者優先考慮。
• 願意出差進行本地和海外現場安裝和調試。
• 熟悉機器人技術、視覺系統、運動控制、感測器和通訊協定。
• 能夠獨立工作，也能作為團隊成員協作，同時管理多個專案和任務。

福利待遇

• 津貼（旅費、交通費等）
• 醫療保險
• 個人休假
• 個人發展機會

A. 定位目標

樑架設工程師負責監督節段箱樑（SBG）架設的技術規劃和現場施工。此職位確保所有架設作業安全、按時完成，並嚴格遵守工程規範和品質標準。

B. 工作職責

• 方法說明和規劃：編制和完善全面的施工方案和方法說明，以實現完整的框架支撐和樑架設順序。
• 技術繪圖：準備和審查詳細的施工圖紙，包括交通改道計畫（TDP）、架設龍門架位置和臨時工程。
• 品質控制：嚴格監控和控制節段箱樑（SBG）安裝相關的施工質量，確保精確的對齊、水平和結構完整性。
• 文件編制：編制、維護和提交內部工程文件、現場日誌、檢查記錄（RFI）和進度報告。
• 現場監督：監督發射人員和分包商，確保遵守安全法規和技術要求。
• 臨時性任務：根據專案經理的指示，承擔與橋樑/高架橋施工和樑架設相關的其他分配任務。

C. 工作要求

• 至少 3-5 年現場經驗，尤其是在節段箱樑 (SBG) 架設方面。
• 具有輕軌、地鐵或大型高速公路高架橋專案經驗的候選人將優先考慮。
• 必須精通英語和馬來語，以便與利害關係人、現場工作人員和管理層進行溝通。精通中文者優先考慮。
• 精通 AutoCAD（用於建築繪圖）和 Microsoft Office（用於報告撰寫）。
• 具備優秀的溝通和協調能力，並能針對具體現場挑戰提出問題並解決問題。
• 土木工程或相關領域的文憑或學士學位。

福利待遇

• 津貼（手機、電腦、交通、餐費等）
• 醫療保險
• 開放文化
• 有薪培訓和發展

職責/權限：

主要職責

1. 作為技術控制人員的代表，負責專案規劃，包括模具、機械和人力；
2. 制定生產線模具安裝計劃，確保生產車間達到每日/每月目標產量；
3. 與設計團隊溝通，以獲得施工圖核准；
4. 與設計團隊一起解讀圖紙並解決差異；
5. 將每日生產計畫表發給總務員，由總務員上傳至ERP系統並分發給生產團隊；
6. 安排/採購預製構件生產所需的材料；
7. 制定每月/每週的生產和交付計劃、材料訂購、人力和機械安排；
8. 準備並維護所有生產和庫存記錄，以確保根據項目要求累積足夠的庫存；
9. 進行澆築前和澆築後檢查；
10. 關閉並管理不符合項報告（NCR）和糾正措施；
11. 分析品質問題的根本原因並實施糾正/預防措施；
12. 調查並糾正實體庫存與系統記錄之間的任何差異；
13. 監測並確保材料浪費量在目標範圍內；
14. 處理並解決客戶投訴；
15. 每月進行現場巡查，或根據客戶指出的缺陷需求進行巡查；
16. 向生產和模具團隊簡要介紹現場缺陷，並提交關於已採取糾正措施的報告；
17. 參加所有EHS巡視、檢查和會議，為安全的工作條件/環境做出貢獻；
18. 執行管理階層不時指派的其他任務；
19. 對於高階職位，他/她應該具備良好的領導能力和指導能力。

資源需求

1. 至少5年混凝土預製件製造業經驗
2. 至少擁有土木/結構工程學位
3. 具備電腦操作能力，熟練使用微軟辦公室軟體或同等軟體者優先。

福利待遇

• 獎金
• 津貼
• 休閒著裝要求
• 醫療保險
• 個人發展機會
• 有薪培訓和發展

我們主要專注於資料中心設備和服務。

責任

拓展銷售、準備報價、管理現有客戶

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 彈性的工作時間
• 休閒著裝要求
• 個人休假
• 開放文化
• 遠距辦公的彈性

1. 對數控磨床進行機器設定、調整和刀具佈置。
2. 閱讀並瞭解機械加工圖、幾何尺寸和公差要求。
3. 選擇正確的砂輪、轉速、進給量、夾具和夾緊方式。
4. 對砂輪進行偏移調整、修整和平衡。
5. 操作機器，依照品質/尺寸目標生產零件。
6. 使用千分尺、遊標卡尺、高度規、輪廓投影機、三坐標測量機（如需要）進行製程測量。
7. 確保零件品質符合圖面規格和客戶要求。
8. 保持機器區域周圍良好的5S管理。
9. 立即向上級報告任何異常情況、機器故障或品質偏差。
10. 始終遵守安全規則、個人防護裝備使用規定和公司標準作業規程。
11. 進行 ISO9001、ISO 14001 和 IATF16949 活動。
12. 管理層要求的其他任何事項。

福利待遇

• 增額和獎金
• 津貼（餐費、培訓費等）
• 醫療保險
• 小組診所
• 個人發展機會
• 帶薪培訓和發展/教育培訓計劃
• 公司年度晚宴暨幸運抽獎
• 節日紅包

• Assemble and install new and modified mechanical assemblies, components, machine tools and controls, and hydraulic power systems.

• Conduct tests of mechanical systems in support of mechanical engineers.

• Design and prepare layouts of machines and mechanical installations, facilities and components according to the specifications given.

• Ensure satisfactory performance and compliance with specifications and regulations.

• Ensure that mechanical engineering designs and finished work are within specifications, regulations and contract provisions.

• Monitor technical aspects of manufacture, utilisation, maintenance and repair of machines and mechanical installations, facilities and components.

Role Overview

• Own end-to-end mechanical engineering - covering design, documentation, vendor coordination, and site installation/start-up support.

Key Responsibilities

• Basic and detailed design of plant layout, pipe and fittings, pipe supports, piping isonetrics, material selection, equipment skid.
• Prepare and check mechanical static and rotating equipment datasheets for RFQs; evaluate vendor proposals for complaince with technical specs, codes, and regulations; lead technical clarifications.
• Liaise with OEMs/Vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership; drive technical clarifications and value engineering.
• Prepare documentation for submission and supporting project team, such as equipment data sheets and drawings, and As Built drawings for submittal to client.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, Process, ICA, controls) and construction/site teams.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, and handover.

Job requirements

• Degree in Mechanical Engineering or equivalent from an internationally recognized university.
• Proficiency in project desgin software such as AutoCAD, Revit, Naviswork, Staad-Pro, Advance Steel will be advantageous.
• Familiar with relevant international standards/codes and onshore/offshore practices.
• Minimum 3 years work experience, preferably in the water/wastewater industry, with good knowledge in mechanical design for static and rotating equipment.

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

Mechanical works jobs.

See and assess drawings andquotation.
Time management
Team work
communication skills
problem solving

CAD Technology

Responsibility

Design and improve manufacturing processes for air-conditioning support structures and metal fabrication products.

Diagnose and repair compressors, control boards, and motors.

Prepare technical drawings, specifications, and engineering documentation.

Support production planning, quality control, and process optimization.

Conduct site inspections and technical assessments.

Liaise with suppliers, customers, and project teams on technical matters.

Ensure compliance with safety, quality, and engineering standards

Requirement

Knowledge of refrigeration cycles, compressors, control systems, and HVAC equipment.

Ability to read mechanical drawings and electrical schematics.

Familiarity with fabrication, welding, and manufacturing processes is an advantage.

Strong troubleshooting and problem-solving skills

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Job Summary

Monitor project progress and coordinate with teams to resolve engineering issues, ensuring timely document submission and successful project completion.

Responsibilities

• Monitor daily progress of project activities and prepare weekly status reports to track assignment outcomes
• Ensure timely submission of all project documents for client review and approval to maintain project compliance
• Coordinate with project personnel, procurement, and operations teams to maintain workflow and meet project deadlines
• Provide comprehensive support to management to facilitate project success and decision-making
• Evaluate, organize, and prioritize workload to adhere to project schedules and optimize resource allocation
• Identify and resolve engineering issues on-site by collaborating with relevant departments to implement effective solutions
• Prepare and report documentation for additional work requirements to support project scope adjustments

Preferred competencies and qualifications

• Degree in Engineering or equivalent
• Proficiency in AutoCAD software for project design and documentation
• Strong technical knowledge relevant to engineering projects to support problem-solving and project execution
• Ability to manage multiple tasks and perform effectively under pressure to meet project deadlines

Job Description:

- Design and review mechanical layouts for warehouse automation systems (AutoCAD).

- Integrate AGV, AMR, and shuttle systems into warehouse infrastructure.

- Troubleshoot and resolve mechanical issues in automation equipment (AGVs, conveyors, AMRs).

- Support installation, commissioning, and testing of systems on-site.

- Coordinate with vendors and teams to ensure timely project execution.

- Lead small teams or subcontractors and provide technical guidance.

- Travel for site inspections, installations, and troubleshooting as required.

Qualifications & Skills

- Bachelor’s degree in Mechanical Engineering or related field.

- Strong mechanical design skills; proficiency in AutoCAD.

- Hands-on experience with AGV, AMR, shuttle systems, and conveyors (preferred).

- Good problem-solving and analytical skills.

- Ability to lead and manage field teams.

- Willingness to travel and work in warehouse/construction environments.