Total 1,085 Junior Executive construction engineer job vacancies in Hong Kong

1. Prepare mechanical drawings using CAD/BIM software such as AutoCAD, Revit for drafting and coordination.
2. Produce HVAC, piping, plumbing, and mechanical system layouts based on engineering design.
3. Assist engineers in preparing technical drawings, sections, details and schematics.
4. Update and revise drawings according to site conditions, design changes and client requirements.
5. Maintain drawing revisions, documentation control, and project records.
6. Support project teams during construction, installation, and inspection stages.
7. Provide support in tender drawings, design documentation, and technical proposals.
8. Manage documentation archiving, file naming conventions and cloud drive.

Required Qualifications and Experience:

• 2-5 years of experience as a Drafter in the construction industry with mechanical based.
• Strong technical drawing and design skills, with ability to interpret blueprint.
• Strong organizational skills with attention to detail and accuracy.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Personal leave
• Personal development opportunities
• On/ Off Job Training

1. 使用 AutoCAD、Revit 等 CAD/BIM 軟體進行繪圖和協調，準備機械圖面。
2. 根據工程設計製作暖通空調、管道、給排水和機械系統佈局圖。
3. 協助工程師準備技術圖、剖面圖、細部圖和原理圖。
4. 根據現場條件、設計變更和客戶要求更新和修改圖面。
5. 維護圖面修訂、文件控制和項目記錄。
6. 在施工、安裝和檢驗階段為專案團隊提供支援。
7. 為投標圖紙、設計文件和技術方案提供支援。
8. 管理文件歸檔、文件命名規則和雲端磁碟。

所需資格和經驗：

• 2-5 年建築業機械繪圖員經驗。
• 具備紮實的技術繪圖與設計能力，能夠解讀藍圖。
• 具備較強的組織能力，注重細節與準確性。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 定期團隊活動
• 個人休假
• 個人發展機會
• 在職/脫產培訓

Job Scope :

• Perform quantity take-off (QTO) for all relevant project scopes.
• Prepare bill of quantities (BOQ) and cost estimates.
• Source, compare, and evaluate supplier and subcontractor quotations.
• Support tender preparation, costing, and pricing submissions.
• Handle procurement activities including material sourcing and purchase orders.
• Monitor project cost, budget usage, and cost control reports.
• Prepare progress claims, verify subcontractor claims, and support monthly evaluations.
• Manage variation orders (VO) including measurement, pricing and submission.
• Assist in contract administration, documentation, and record keeping.
• Coordinate with project team on material requirements and site progress.
• Maintain supplier database and update procurement schedules.
• Support final account preparation and project close-out documentation.

Perks & Benefits

• Annual bonus
• Yearly increment
• Allowance (handphone, transportation, etc.)
• Overtime

Job Scope :

• Perform quantity take-off (QTO) for all relevant project scopes.
• Prepare bill of quantities (BOQ) and cost estimates.
• Source, compare, and evaluate supplier and subcontractor quotations.
• Support tender preparation, costing, and pricing submissions.
• Handle procurement activities including material sourcing and purchase orders.
• Monitor project cost, budget usage, and cost control reports.
• Prepare progress claims, verify subcontractor claims, and support monthly evaluations.
• Manage variation orders (VO) including measurement, pricing and submission.
• Assist in contract administration, documentation, and record keeping.
• Coordinate with project team on material requirements and site progress.
• Maintain supplier database and update procurement schedules.
• Support final account preparation and project close-out documentation.

Perks & Benefits

• Annual bonus
• Yearly increment
• Allowance (handphone, transportation, etc.)
• Overtime

職責：

• 監督 CWSP 和消防服務的現場安裝工作。
• 與顧問、分包商和現場團隊協調合作。
• 監控工作進度、品質以及是否符合圖面/規範。
• 準備技術文件、施工圖、施工方法說明和報告。
• 參加現場會議和檢查。
• 協助進行測試調試和專案文件編制。

要求：

• 機械工程或相關領域的文憑/學位。
• 至少2-5年機電或樓宇服務項目相關經驗。
• 具備以下的知識：冷水及衛生管道系統、消防系統
• 能夠讀懂和理解施工圖。
• 良好的協調和溝通能力。
• 精通 AutoCAD 和 Microsoft Office。
• 對相關領域有濃厚興趣的應屆畢業生也可考慮擔任初級職位。
• 優先技能（兩個職位均需具備）
• 擁有高層住宅、商業或工業專案經驗。
• 熟悉相關部門的提交和審批流程。
• 了解測試和調試程序。
• 具有團隊合作精神、良好的職業道德和積極的工作態度。

福利待遇

• 全職職位
• 醫院和手術計劃
• 公積金、社保和年假
• 職涯晉升機會

Responsibilities

• Assist in Process Optimization: Continuously analyse and improve manufacturing processes to enhance efficiency, reduce costs, and minimize waste.
• Assist in Equipment Maintenance: Oversee the maintenance and calibration of production equipment to ensure optimal performance.
• Assist in Troubleshooting: Identify and resolve production issues and bottlenecks. Cost Management: Monitor and control production costs to ensure profitability.
• Continuous Improvement: Implement initiatives to improve manufacturing processes and productivity.
• Technical Support: Perform technical support/ repairs on products, replacing faulty components if necessary.

Requirements

• At least a certificate, or diploma and above in Mechatronic/Electromechanical Engineering, Industrial Engineering, or a related field.
• Minimum 2 years of experience in a manufacturing environment, strong knowledge of manufacturing processes and equipment.
• Proficiency in using manufacturing software (e.g., CAD/CAM)
• Excellent problem-solving and analytical skills.
• Strong in communication skills and ability to work effectively in a fast-paced, team-oriented environment.
• Have strong written and spoken Mandarin (will be added advantage as it will require interaction with the counterpart from China) and English skills. A
• Able to complete other tasks assigned by superiors/management.

Interested candidates are encouraged to apply online / write-in / Email with comprehensive resume with a non-returnable photograph, stating your expected and current salary, contact telephone number to:

Human Resource & Administration Department,

Pantech Stainless & Alloy Industries Sdn Bhd

PTD 204334, Jalan Platinum Utama

Kawasan Perindustrian Pasir Gudang, Zon 12B

81700 Pasir Gudang, Johor Tel: 607-251 8888

Email: psa-hr@pantechssalloy.com

Perks & Benefits

• Open culture
• Personal development opportunities

Job Responsibilities:

•  To request quotation from suppliers/sub-contractor and evaluate the proposal as well as negotiate terms to secure cost-effective and high-quality supplies.
• Implementing all aspects of QS services from Pre to Post Contract including submission of progress claim, variation order and completion of Final Account
• To manage and co-ordinate projects related contractual matters.
• Supervise on-site works and ensure that they are carried out in accordance to approved specifications and achieve quality aspect.
• Work closely with main-contractors on project progress, deliverables and timeframe.
• Close coordination of work with both internal (project team) and external parties (client, regulatory bodies and etc.).
• Other ad-hoc tasks within the Quantity Surveyor's capability.

Job Requirement:

• Minimum 1-5 years of working experience in construction industry or relevant field.
• Candidate must possess at least Bachelor's Degree/Diploma in Engineering (Civil), Project Management, Quantity Surveyor or equivalent.
• Good communication skills, positive working attitude, punctuality with high responsibility, and able to work independently.
• Bilingual in English and Mandarin is an advantage.
• Good knowledge about Facade work.

Perks & Benefits

• Personal leave
• Open culture
• EPF & SOCSO

Responsibilities:

• Monitor daily construction site activities to ensure compliance with safety regulations and procedures.
• Conduct regular site inspections and safety audits.
• Identify potential hazards and recommend corrective/preventive actions.
• Ensure workers are using proper Personal Protective Equipment (PPE).
• Conduct toolbox meetings and safety briefings.
• Prepare and maintain safety reports, records, and documentation.
• Investigate accidents, incidents, and near misses, and prepare investigation reports.
• Coordinate with project managers, contractors, and authorities on safety matters.
• Ensure all safety signage, permits, and emergency procedures are properly implemented.
• Promote safety awareness and maintain a strong safety culture at the worksite.

Requirements:

• Minimum 1 – 5 years of working experience in construction site safety supervision.
• Possess valid Site Safety Supervisor (SSS) certification recognized in Malaysia.
• Knowledge of OSHA regulations and construction safety practices.
• Able to work independently and handle site safety matters effectively.
• Good communication and problem-solving skills.
• Familiar with safety documentation and reporting procedures.
• Willing to travel or work at different project sites if required.

Perks & Benefits

• Personal leave
• Personal development opportunities
• Open culture
• EPF & SOCSO & EIS

職責

• 協助流程優化：不斷分析和改進製造流程，以提高效率、降低成本並最大限度地減少浪費。
• 協助設備維護：監督生產設備的維護和校準，以確保最佳效能。
• 協助故障排除：識別並解決生產問題和瓶頸。成本管理：監控和控制生產成本，確保獲利能力。
• 持續改善：實施各項舉措，以改善製造流程和提高生產效率。
• 技術支援：對產品進行技術支援/維修，必要時更換故障零件。

要求

• 至少擁有機電工程、工業工程或相關領域的證書或文憑及以上學歷。
• 至少2年製造業工作經驗，精通製造流程和設備。
• 熟練使用製造軟體（例如，CAD/CAM）
• 優秀的解決問題和分析能力。
• 溝通能力強，能夠在快節奏、團隊合作的環境中高效工作。
• 具備優秀的國語（書面和口語能力）（由於需要與中方同事溝通，具備相關技能者優先考慮）和英語能力。
• 能夠完成上級/管理階層指派的其他任務。

有意者請透過以下方式申請：線上申請/書面申請/電子郵件申請，請附上包含不可退還照片的完整簡歷，並註明期望薪資和目前薪資，以及聯絡電話：

人力資源與行政部

Pantech Stainless & Alloy Industries Sdn Bhd

PTD 204334，白金烏塔瑪路

嘉年華山工業園區巴西古當，Zon 12B

81700 巴西古當, 柔佛電話: 607-251 8888

電子郵件：psa-hr@pantechssalloy.com

福利待遇

• 開放文化
• 個人發展機會

Job Type: Machinist.

Responsibilities.

• Operate CNC machines while performing inspection along with taking care of the maintenance.
• Perform preventive maintenance services necessary of the CNC machine in daily, monthly, and annually.
• Update the daily maintenance check sheet before operating the CNC machine.
• Follow the daily planned CNC machines, output, and directly confirm with superior or planner for any enquiries or issues related to the machine operation.
• Perform inspection and calibration if necessary to all equipment daily before usage.
• Setup CNC machine according to the tool list and use other tool substitute, if necessary, with superior validation.
• Perform visual and dimension inspection to the material blank before load into the CNC machine.
• Operate CNC machine in comply with target plan and CNC machine running ratio while take responsibility to maximize output quantity without diminishing quality and maximize CNC machine's running time.
• Responsible to the working area in terms of cleanliness, tidiness, organized and systemic.
• Involves in troubleshoot, improvement and skills up activities.
• Perform other responsibilities as assigned by superior or management from time to time.

Requirement.

• Able to read and write G code and M code.
• Able to operate CNC machines or at least have experience on CNC machine hands on.
• Have some knowledge about geometric dimensioning and tolerancing system or at least able to understand engineering drawings.
• Proficient in at least Microsoft Office software.
• Eager to learn/experience new knowledge and technology.
• Must be able to perform multitasking, critical thinking, problem solving and teamwork.
• Have experience or at least knowledge in measurement equipment such as caliper, micrometer, or any measuring equipment.
• Minimum supervision and self-discipline.

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Medical insurance
• Paid training and development
• Yearly performance bonus.
• Yearly performance based increament.
• 5 working days.

Scope:

* Assist in CIDB license application, renewal & maintenance

* No need to report to office

* No involvement in projects

* No workload / zero commitment

Requirements:

* Diploma / Bachelor in Engineering

* Open to working professionals

* required working experience Graduates 5 years

* Not yet register in CIDB portal

Scope:

* Assist in CIDB license application, renewal & maintenance

* No need to report to office

* No involvement in projects

* No workload / zero commitment

Allowance:

* Diploma: RM3,000/year (3 years working experience)

* Degree: RM6,000/year (5 years working experience)

* Paid annually, no deduction, no delay

100% Zero Risk Assurance:

* No legal / project / financial liability

* No signing of liability documents

* Fully compliant with Malaysian regulations

* Personal info strictly for CIDB use only

* No impact on your current job or career

If you are a Engineering graduate, feel free to PM me for more details.

Let’s collaborate for mutual benefit

Perks & Benefits

關於該職位

我們正在尋找一位積極主動、以結果為導向的銷售工程師，要求至少擁有兩年工業領域的銷售經驗。產品經驗並非必要條件——我們歡迎任何擁有工業銷售背景、渴望學習並與我們共同成長的候選人。

主要職責

• 在工業領域內開發和管理銷售機會。
• 與客戶（工廠/設施）建立並維持牢固的關係
• 經理、維修工程師、採購員等）。
• 了解客戶需求並提出合適的產品解決方案。
• 準備報價單、技術方案，並跟進銷售線索。
• 達成月度和年度銷售目標。
• 提供有關市場趨勢和競爭對手活動的回饋意見。

要求

• 至少2年工業產品或工業市場銷售經驗。
• 優秀的溝通、表達和談判能力。
• 積極主動、獨立、目標明確。
• 自備車輛（公司將提供每月車輛補貼）。
• 願意根據需要出差。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 開放文化
• 個人發展機會
• 5個工作天。
• • 能夠立即開始工作者優先考慮。

職位概述

在企業資料管理領域，資料工程師負責創建和維護最佳資料管道架構，其典型職責包括：

工作職責

• 整合滿足非功能性和功能性業務需求的大型複雜資料集
• 識別、設計和實施內部流程改進，包括重新設計基礎設施以提高可擴展性、優化資料傳輸以及自動化手動流程。
• 利用 Azure、AWS 和 SQL 技術建立必要的基礎設施，以實現從各種資料來源中最佳的資料提取、轉換和載入。
• 建立分析工具以利用數據管道，為關鍵業務績效指標（包括營運效率和客戶獲取）提供可操作的洞察
• 與客戶利害關係人（包括數據、設計、產品和管理團隊）合作，並協助他們解決與數據相關的技術問題。
• 與包括執行團隊、產品團隊、數據團隊和設計團隊在內的客戶利害關係人合作，支援他們的數據基礎設施需求，同時協助解決與數據相關的技術問題。

福利待遇

• 員工權益
• 津貼（旅費、交通費等）
• 附近公共交通
• 免費小吃/歡樂時光
• 定期團隊活動
• 公司旅行
• 醫療保險
• 個人休假
• 開放文化
• 個人發展機會
• 有薪培訓和發展

• 對所有相關項目範圍進行工程量清單編製（QTO）。
• 編制工程量清單（BOQ）和成本估算。
• 尋找、比較和評估供應商和分包商的報價。
• 協助準備投標書、成本核算和報價提交。
• 負責採購活動，包括物料採購和採購訂單。
• 監控專案成本、預算使用情況和成本控制報告。
• 準備進度款申請，核實分包商的申請，並支援每月評估。
• 管理變更訂單（VO），包括測量、定價和提交。
• 協助合約管理、文件編制和記錄保存。
• 與專案團隊協調材料需求和現場進度。
• 維護供應商資料庫並更新採購計畫。
• 協助編制最終結算報告和專案收尾文件。

福利待遇

• 年終獎金
• 年度增量
• 津貼（手機費、交通費等）
• 隨著時間的推移

• Lakukan pengambilan kuantiti (QTO) untuk semua skop projek yang berkaitan.
• Menyediakan bil kuantiti (BOQ) dan anggaran kos.
• Mencari, membandingkan dan menilai sebut harga pembekal dan subkontraktor.
• Menyokong penyediaan tender, kos dan penyerahan harga.
• Mengendalikan aktiviti perolehan termasuk sumber bahan dan pesanan pembelian.
• Pantau kos projek, penggunaan bajet dan laporan kawalan kos.
• Sediakan tuntutan kemajuan, sahkan tuntutan subkontraktor dan sokong penilaian bulanan.
• Mengurus pesanan variasi (VO) termasuk pengukuran, penetapan harga dan penyerahan.
• Membantu dalam pentadbiran kontrak, dokumentasi dan penyimpanan rekod.
• Menyelaras dengan pasukan projek mengenai keperluan bahan dan kemajuan tapak.
• Mengekalkan pangkalan data pembekal dan mengemas kini jadual perolehan.
• Menyokong penyediaan akaun akhir dan dokumentasi penutupan projek.

Faedah & Kebaikan

• Bonus tahunan
• Kenaikan tahunan
• Elaun (telefon bimbit, pengangkutan, dll.)
• Masa tambahan