Total 16,441 service engineer job vacancies in Hong Kong

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Main Duties & Responsibilities:

• Perform new build installations of Svanehoj pumps and ITT supported products.
• Perform service and overhaul of Svanehoj and ITT supported products including machinery like pumps, compressors etc.
• Supervise yard workers assigned during the repair.
• Organize the repair/mechancial tasks on board and in workshop.
• Finalize detailed service report after completion of each job.
• Build a good relationship with our customers on-site.
• Ensure that the work is excuted according to company safety and environmental guidelines and customer procedures.
• Mechancial inspection, repair and troubleshooting of entire pump range.
• Carry out laser alignment measurements.
• Writing of reports for carried out inspections, repair, and overhaul under extreme pressure.
• Travelling activity globally if required.

Requirements:

• Mechancial Engineering or a related discipline.
• Able to act responsible and execute several projects at same time.
• Acting responsible and trustworthy towards customers and colleagues and the company.
• Able to write detailed technical reports in English.

Responsibilities

• In charge of performing routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficienc
• In charge of diagnose mechanical, electrical, and control system issues and implement effective solutions
• Responsible in executing commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Responsible in providing exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Taking charge of preparing and submiting detailed reports outlining service activities, findings, and recommendations for future improvements.
• Available to respond to chiller breakdown calls during assigned standby shifts.

Requirement

• Min Diploma in Engineering and relevant
• Min 3 years of experience in chiller maintenance, commissioning, or HVAC

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of providing after-sale service and support with the highest standard of professionalism and efficiency to achieve total customer satisfaction.
• Responsible for performing installation, retrofit & upgrade, preventive maintenance, troubleshooting and repair for electronics assembly and inspection equipment.
• In charge of diagnose technical problem, determine the solution and assist customer in implementing the fix.
• Responsible for conducting on-site evaluation for electronics assembly and inspection equipment at customer sites.
• Responsible in supporting sales in technical support and application of products.

Requirements:

• Min Diploma in Electrical/ Electronic in Engineering
• Min 2 years of experience in Electronics and Semiconductor or Automation industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Conducting service and calibration procedures for spectrophotometers, color readers, illuminance meters, and light meters.
• Performing calibration, repair, and maintenance tasks in accordance with standards set by the manufacturing facility in Japan.
• Executing adjustments, alignments, replacements, and repairs of equipment and components as per equipment manuals and schematics, utilizing appropriate soldering tools.
• Providing precise technical support by responding to customer inquiries via phone and email.
• Ensuring accurate data entry and completion of service reports to comprehensively document all repair and calibration activities.
• Monitoring repair cases to guarantee timely completion within the turnaround time specified by the factory guidelines.

Job Requirement:

• Minimum Diploma in Electrical & Electronics Engineering or relevant
• Minimum with 2 year working experience in CCTV/ Security Industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

We are looking for a dedicated Service Technician/ Engineer to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the technical manager, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.

• Liaise/co-ordinate with shipyard for related project.

• Assist in the repair works in the workshop.

• Brief business partners on various navigational/communication system setup.

• Provide technical support for business partners.

• Prepare reports on equipment to business partners.

• Any other ad hoc tasks related to business needs.

Requirements

• Diploma / Degree in Electronics/ Electrical / Communications Engineering

• 1- 4 years of Marine Experience

• Experience in Navigational Systems eg RADAR, ECDIS, GPS, DDU, GYRO will be preferred

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsibilities

• In charge of performing routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficienc
• In charge of diagnose mechanical, electrical, and control system issues and implement effective solutions
• Responsible in executing commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Responsible in providing exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Taking charge of preparing and submiting detailed reports outlining service activities, findings, and recommendations for future improvements.
• Available to respond to chiller breakdown calls during assigned standby shifts.

Requirement

• Min Diploma in Engineering and relevant
• Min 3 years of experience in chiller maintenance, commissioning, or HVAC

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Field Service Engineer

Job Summary

• Maintain and troubleshoot hardware and infrastructure supporting a mission-critical Command & Control (C2) system.
• Provide system maintenance and support to ensure high levels of reliability, availability, performance, and security.
• Work as part of a dedicated engineering team supporting critical operational environments.

Key Responsibilities

Warranty Administration

• Maintain accurate warranty records for installed hardware.
• Assist in warranty claim administration and coordination with vendors/subcontractors.
• Inspect repaired components and verify serviceability.
• Perform integration, configuration control, and testing of repaired hardware.

Corrective Maintenance & Field Support

• Perform corrective maintenance activities for hardware failures.
• Restore systems to operational status within SLA requirements.
• Monitor and maintain system availability and reliability metrics, including:Mean Time Between Failures (MTBF)Mean Time To Repair (MTTR)System downtime recordsHardware defect tracking
• Troubleshoot and resolve hardware-related issues in production environments.

Field Testing & System Validation

• Conduct software and system testing following bug fixes, patches, and deployments.
• Validate system functionality after software upgrades and maintenance activities.
• Ensure correct system configurations are loaded before testing and production use.
• Support deployment verification and acceptance testing activities.

Spares Management

• Manage inventory of spare parts, test equipment, and maintenance tools.
• Perform receiving, issuing, storage, and disposal activities.
• Conduct serviceability checks on spare components.
• Coordinate repair and replacement of faulty spare equipment.
• Monitor end-of-life (EOL) and end-of-support (EOS) status of hardware assets.

Preventive Maintenance

• Execute preventive maintenance activities according to approved schedules and procedures.
• Perform system inspections, calibration, servicing, and configuration verification.
• Follow approved maintenance checklists and standards.
• Prepare and submit preventive maintenance reports upon completion.

Calibration Services

• Coordinate with vendors for calibration of maintenance and test equipment.
• Ensure calibration schedules are maintained and equipment remains compliant.

General Duties

• Support operational readiness and system availability requirements.
• Perform additional technical and operational duties as assigned.

Technical Skills & Experience

Infrastructure & Hardware Support

• HP Servers
• Cisco Network Switches
• Cisco Wireless Access Points
• Uninterruptible Power Supply (UPS)
• Remote Input-Output (RIO) Systems
• Programmable Logic Controllers (PLC)
• IP55/IP65 Outdoor Racks
• Video Wall Systems
• Keyboard, Video, Mouse (KVM) Systems

Systems & Operations

• Mission-Critical Systems Support
• Hardware Troubleshooting & Diagnostics
• Corrective & Preventive Maintenance
• System Testing & Validation
• Configuration Management
• Hardware Lifecycle Management
• Spare Parts & Asset Management
• System Reliability & Availability Monitoring
• SLA Compliance Management
• Incident Resolution

IT Service Management

• IT Service Management (ITSM)
• Incident Management
• Change Management
• Problem Management
• Service Delivery Best Practices

Technical Competencies

• Reading and interpreting system architecture diagrams
• Understanding operational and user environments
• Root cause analysis and troubleshooting
• Documentation and reporting
• Vendor coordination and management

Requirements

• Diploma or bachelor's degree in engineering, preferably Electrical Engineering or Info-Communication Engineering.
• Minimum 2–3 years of experience supporting any of the following Servers, Cisco Networking, UPS, RIO, PLC, Outdoor Racks, Video Wall and Systems KVM
• Minimum 2–3 years of experience supporting mission-critical environments with stringent SLAs (e.g., 99.9% availability).
• Strong understanding of ITSM standards, processes, and best practices.

Soft Skills

• Customer-focused with strong service orientation.
• Strong analytical and problem-solving abilities.
• Good listening and communication skills.
• Positive attitude and willingness to learn new technologies.
• Ability to work independently and within a team environment.
• Comfortable working in fast-paced, high-pressure environments.
• Adaptable, proactive, and self-motivated

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to Quesscorp Singapore’s PDPA and e2i’s PDPA

About the Role

We are seeking a skilled Service Engineer who installs, maintains, and troubleshoots security systems, delivers reliable technical support, and ensures optimal system performance and customer satisfaction.

Job Responsibilities

Installation & Commission

• Set up and configure equipment or systems at customer sites.
• Ensure proper functioning and compliance with specifications.

Maintenance & Repairs

• Perform routine preventive maintenance.
• Diagnose and fix faults or breakdown in equipment or systems.

Technical Support

• Provide on-site or remote support to customers.
• Troubleshoot issues and offer solutions promptly.

Customer interaction

• Communicate effectively with clients to understand their needs.
• Train users on proper operation and maintenance of equipment.

Job Requirements

• Minimum NITEC in Electrical / Electronic Engineering
• Minimum 5 year working experience in Security system suchas Integrated Security Management System, Card Access Control System, IntrusionDetection System, FIDS System, CCTV System, PA System, Fire Alarm System.
• Proficient in Microsoft Office Suite (Excel, Word,Outlook), Microsoft Project, MS Team and AutoCAD
• A self-starter, comfortable working independently andtake high level of responsibility.
• Resilience, entrepreneurship spirits, self-direction,risking-taking and adaptability to environment.

Job Description & Requirements

Position Summary

The 1st Level Remote Support role is responsible for providing first-level troubleshooting and technical assistance to users’ queries and incidents received through various support channels in a professional and timely manner.

Key Responsibilities

• Provide First Call Resolution (FCR) technical support via phone and email

• Perform first-level troubleshooting on reported incidents and escalate to appropriate resolver groups when required

• Provide timely updates to customers on outstanding issues within agreed service levels

• Maintain ownership of cases and ensure accurate documentation until closure

• Manage customer expectations and escalate unusual trends or high call volumes to the Team Lead

• Classify and prioritize incidents appropriately while tracking resolution progress and follow-up actions

Requirements

• Diploma in IT-related fields

• Minimum 1 year of experience in End-User Support, Desktop Support, or Technical Service Desk

• Customer service experience from a non-technical call center environment will not be considered

• Knowledge of Windows OS, Active Directory Account Administration, MS Outlook, and mobile device support

Responsibilities

• In charge of performing routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficienc
• In charge of diagnose mechanical, electrical, and control system issues and implement effective solutions
• Responsible in executing commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Responsible in providing exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Taking charge of preparing and submiting detailed reports outlining service activities, findings, and recommendations for future improvements.
• Available to respond to chiller breakdown calls during assigned standby shifts.

Requirement

• Min Diploma in Engineering and relevant
• Min 3 years of experience in chiller maintenance, commissioning, or HVAC

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• In charge of performing routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficienc
• In charge of diagnose mechanical, electrical, and control system issues and implement effective solutions
• Responsible in executing commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Responsible in providing exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Taking charge of preparing and submiting detailed reports outlining service activities, findings, and recommendations for future improvements.
• Available to respond to chiller breakdown calls during assigned standby shifts.

Requirement

• Min Diploma in Engineering and relevant
• Min 3 years of experience in chiller maintenance, commissioning, or HVAC

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

•  Position : Service Engineer (Engineer 1/ Electronics/Electrical /Microelectronics)

•  Location : KAKI BUKIT /Island wide

•  Working hours : 5 days work week; Monday - Friday, 830am to 500pm

•  Salary (commensurate with experience) : Gross Salary up to$5700

•  Duration : 2 years Contract

•  Industry : MANUFACTURE AND REPAIR OF SEMICONDUCTOR ASSEMBLY AND TESTING EQUIPMENT

Main Responsibilities:

• Install, service, and maintain equipment at customer sites.

• Provide troubleshooting and technical support.

• Prepare service reports and attend weekly technical meetings.

• Handle service jigs and assist senior engineers in advanced tasks (e.g., robot teaching).

• Participate in 24/7 standby support on a roster basis.

• Perform shift work and ad-hoc delivery tasks when required.

Requirements:

• At least ITE, Diploma in Electronics/Electrical /Microelectronics Engineering.

• Cleanroom working experience preferable but not a must

• Bilingual in English and Mandarin to liaise with Mandarin-speaking clients who communicate only in Mandarin
  

Send your resume via Email to Jane@searchpersonnel.com.sg

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Deputy Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

• In charge of providing after-sale service and support with the highest standard of professionalism and efficiency to achieve total customer satisfaction.
• Responsible for performing installation, retrofit & upgrade, preventive maintenance, troubleshooting and repair for electronics assembly and inspection equipment.
• In charge of diagnose technical problem, determine the solution and assist customer in implementing the fix.
• Responsible for conducting on-site evaluation for electronics assembly and inspection equipment at customer sites.
• Responsible in supporting sales in technical support and application of products.

Requirements:

• Min Diploma in Electrical/ Electronic in Engineering
• Min 2 years of experience in Electronics and Semiconductor or Automation industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900