Total 1,505 system engineer job vacancies in Australia

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

Who are we?

Equinix is the world’s digital infrastructure company®, shortening the path to connectivity to enable the innovations that enrich our work, life and planet. 

A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future.

Joining our operations team means being at the center of everything – maintaining and evolving critical infrastructure that powers the digital world and delivers real impact for our customers, communities and society. You’ll find belonging, purpose, and a team that welcomes you—because when you feel valued, you’re empowered to do your best work.

Job Summary

A senior, highly skilled specialist responsible for ensuring the reliability, availability, and safe operation of mission‑critical data center infrastructure through advanced controls and automation systems. The Senior Critical Facilities Engineer (Controls) applies deep expertise in BMS, control systems, and system integration to monitor, optimize, and stabilize critical facilities operations. This role operates with a high degree of independence within standard operating procedures and supports operational excellence by improving system behavior, alarm management, and control logic across the site.

Responsibilities

Facility / Infrastructure Maintenance

• Performs specialized preventive and corrective maintenance with a focus on controls, automation, and monitoring layers supporting critical facilities systems.
• Acts as a technical authority for Building Management Systems (BMS), DCOS, and associated control platforms, ensuring reliable monitoring and control of power, cooling, and life‑safety systems.
• Monitors and analyzes complex alarms, trends, and events within the BMS, independently resolving issues related to control logic, system behavior, and signal integrity.
• Leads investigation of abnormal system behavior, including false alarms, control sequence failures, sensor drift, and communication faults, recommending corrective actions.
• Supports control system interfaces across mechanical and electrical systems (e.g. chillers, CRAH/CRACs, generators, UPS interfaces), working closely with Electrical and Mechanical CF teams.
• Reviews, validates, and optimizes alarm configuration, thresholds, and escalation logic to reduce noise and improve incident response effectiveness.
• Supports configuration, testing, and validation of control strategies during maintenance windows, system upgrades, or commissioning activities.
• Implements and supports energy efficiency and optimization initiatives through improved control strategies, setpoint tuning, and automated response mechanisms.
• Works on assignments requiring significant judgment and initiative, fully understanding how controls failures or misconfigurations can impact customer infrastructure, availability, and SLAs.

Vendor Support

• Acts as the primary technical interface for controls and BMS vendors, integrators, and service providers.
• Reviews and validates vendor proposed control logic, graphics, and sequences of operation to ensure alignment with site standards and operational intent.
• Assists with the creation, review, and approval of Maintenance Operation Protocols (MOPs) and scripts related to control system changes.
• Oversees vendor execution during controls‑related maintenance, system upgrades, or retrofits, including pre‑work briefings, live supervision, and post‑work validation.
• Ensures control system documentation, network diagrams, point lists, and as‑built records are maintained accurately.

Site Administration & Incident Support

• Prepares and maintains specialized documentation for control system operations, alarm management, and automated response mechanisms.
• Identifies Single Points of Failure (SPOFs) and systemic risks within the controls and monitoring layer and recommends architectural or configuration improvements.
• Responds to on‑site incidents involving BMS failures, alarm floods, loss of visibility, or automation defects, providing controls expertise during restoration.
• Leads or contributes to Root Cause Analysis (RCA) related to controls, automation, or monitoring system failures.
• Supports on‑site teams during incidents by providing control‑system insight, diagnostic guidance, and decision support.
• Ensures controls‑related procedures, alarm management policies, and change processes are followed consistently during normal operations and incidents.

Work Orders & Additional Projects

• Completes skilled work requests related to control system changes, monitoring enhancements, and automation improvements.
• Supports commissioning, re‑commissioning, and control validation activities for new or modified infrastructure.
• Implements approved changes to controls logic, alarm strategies, and system interfaces in support of operations and improvement initiatives.
• Executes and supports complex controls‑focused projects, including BMS upgrades, platform migrations, and integration of new plant systems.
• Supports life‑cycle management and end‑of‑life replacement of controls hardware, networks, and software platforms.
• Recommends controls and automation improvement projects based on operational data, incident trends, and system performance.

Collaboration

• Collaborates closely with Electrical, Mechanical, Operations, Security, and IT teams to ensure controls systems accurately reflect facility behavior and operational needs.
• Acts as a technical mentor for engineers in the areas of BMS usage, alarm interpretation, and control system troubleshooting.
• Works with stakeholders to forecast controls‑related spare parts, licensing, and system capacity requirements.
• Serves as a senior controls subject‑matter expert during incidents, complex changes, and multi‑discipline projects.

Qualifications

• Proven experience supporting controls, BMS, automation, or monitoring systems in mission‑critical environments such as data centers, smart buildings, utilities, or industrial facilities.
• Diploma or Degree in Controls Engineering, Electrical Engineering, Mechanical Engineering, Automation, or Building Services Engineering preferred.
• Hands‑on experience with BMS / DCOS platforms, PLC‑based systems, alarm management strategies, and system integration is highly desirable.

Equinix is an Equal Employment Opportunity and, in the U.S., an Affirmative Action employer.  All qualified applicants will receive consideration for employment without regard to unlawful consideration of race, color, religion, creed, national or ethnic origin, ancestry, place of birth, citizenship, sex, pregnancy / childbirth or related medical conditions, sexual orientation, gender identity or expression, marital or domestic partnership status, age, veteran or military status, physical or mental disability, medical condition, genetic information, political / organizational affiliation, status as a victim or family member of a victim of crime or abuse, or any other status protected by applicable law. 

What you'll do:

As a Project Engineer based in Singapore’s vibrant manufacturing sector, you will be entrusted with overseeing complex capital projects from their earliest stages through to successful completion. Your day-to-day responsibilities will involve collaborating across multiple departments—such as production, supply chain management, quality assurance, safety compliance, engineering design—and engaging with external contractors or suppliers. You will be responsible for developing detailed plans that outline scope, budgetary constraints, scheduling milestones, resource allocation strategies as well as risk mitigation approaches. Throughout each phase of the project lifecycle—from conceptualisation through engineering design to installation and commissioning—you will ensure that all activities adhere strictly to established safety protocols and factory standards. Your ability to manage stakeholder expectations while maintaining meticulous documentation will be crucial in achieving seamless handovers upon project completion. By driving plant optimisation initiatives alongside routine upgrades or expansions of production lines or utilities infrastructure you will contribute directly towards enhancing operational efficiency within a dynamic team-oriented environment.

• Support the annual capital expenditure planning process by developing comprehensive project charters for approved initiatives that align with organisational objectives.
• Define clear project scopes, objectives, budgets, schedules, and resource requirements to ensure successful project execution from inception to completion.
• Prepare detailed project documentation including charters, cost estimates, schedules, risk assessments, progress reports, and close-out materials to maintain transparency throughout the project lifecycle.
• Monitor project expenditures diligently to ensure effective cost control measures are implemented at every stage of the process.
• Develop robust engineering solutions and layouts that strictly comply with safety regulations, hygiene protocols, quality benchmarks, and manufacturing standards.
• Coordinate civil, structural, mechanical, electrical, and utility requirements for new installations by liaising with relevant stakeholders both internally and externally.
• Review technical specifications thoroughly to guarantee all engineering deliverables meet or exceed internal compliance standards.
• Manage relationships with contractors, suppliers, and equipment vendors during project implementation to ensure seamless integration of new systems into existing operations.
• Oversee procurement processes for equipment as well as original equipment manufacturer (OEM) activities and installation works to facilitate timely project progression.
• Lead commissioning efforts including testing and start-up activities while coordinating closely with operations, maintenance, quality assurance, and engineering teams during handover.

What you bring:

To excel as a Project Engineer in this role you will draw upon extensive experience gained within large-scale manufacturing environments where you have successfully managed complex capital projects from conception through execution. Your educational background in an engineering discipline equips you with the technical foundation necessary for developing innovative solutions tailored specifically towards improving plant performance or expanding production capabilities. Beyond technical proficiency you possess exceptional interpersonal skills which allow you to foster collaborative relationships across multidisciplinary teams—ensuring alignment on shared goals while navigating competing priorities effectively. Your attention to detail when preparing documentation combined with your commitment towards upholding rigorous safety standards positions you as a dependable partner throughout every stage of the project lifecycle. Additionally your familiarity with industry-specific regulations such as GMP or SHE requirements enables you to anticipate potential challenges proactively thereby safeguarding both operational integrity and regulatory compliance.

• A degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Industrial Engineering or a closely related discipline is required for this role.
• You bring 8–12 years of proven experience in manufacturing project engineering or managing capital expenditure projects within industrial settings.
• Demonstrated success in delivering factory expansion projects or leading equipment installation initiatives within fast-moving consumer goods (FMCG), food manufacturing or pharmaceutical environments is highly desirable.
• A thorough understanding of manufacturing operations coupled with deep knowledge of relevant engineering standards and stringent safety requirements is essential.
• Experience managing contractors as well as building productive relationships with suppliers and external vendors forms a core part of your skill set.
• Familiarity with recognised project management methodologies along with strong command over project controls ensures effective oversight throughout each phase of delivery.
• Excellent communication skills enable you to provide regular updates to key stakeholders while facilitating smooth collaboration between cross-functional teams.
• Exposure to multinational manufacturing environments enhances your ability to adapt best practices across diverse operational contexts.
• Hands-on experience in end-to-end management of CAPEX projects—including equipment procurement through commissioning—is highly advantageous.
• Knowledge of GMP (Good Manufacturing Practice), food safety protocols or SHE (Safety Health Environment) requirements would further strengthen your application.

What sets this company apart:

This organisation stands out as a leader in its field by prioritising employee wellbeing alongside operational excellence. With a strong emphasis on flexible working opportunities employees are empowered to achieve an optimal balance between professional commitments and personal aspirations. The company fosters an inclusive culture where knowledge sharing is actively encouraged—enabling individuals at all levels to learn from one another while contributing unique perspectives towards collective success. Ongoing training programmes support continuous professional development ensuring that team members remain at the forefront of industry advancements without sacrificing job satisfaction or work-life harmony. By championing open communication channels across departments this employer creates an environment where everyone feels valued respected—and motivated—to deliver their very best every day

What's next:

If you are ready to take on a rewarding challenge where your expertise can make a tangible difference we encourage you to explore this opportunity further!

Apply today by clicking on the link provided—your next career move could be just around the corner.

Do note that we will only be in touch if your application is shortlisted.
Robert Walters (Singapore) Pte Ltd
ROC No.: 199706961E | EA Licence No.: 03C5451
EA Registration No.: R1871051 Gregorio Tabusalla Cazalis

Company Overview

Founded in 2013, MQ Solutions & Services builds lasting business relations by upholding Moral Quotient—understanding right from wrong and acting on core values—in Information and Communication Technology.

Job Summary

Provide on-site IT support by troubleshooting and resolving desktop PC and printer issues, deploying hardware and software, and serving as the first point of contact for IT-related customer calls in a fast-paced environment.

Responsibilities

• Troubleshoot and resolve desktop PC and printer issues on customer sites to ensure minimal downtime
• Serve as the first point of contact for customer IT-related calls, providing timely and effective support
• Deploy new hardware and software across multiple users and locations to maintain up-to-date IT infrastructure
• Install and troubleshoot IT hardware and software in a large, fast-paced user environment to support operational continuity
• Perform ad-hoc IT maintenance and support tasks as assigned by the reporting manager
• Collaborate with team members and interact professionally with customers and vendors to deliver quality service
• Maintain a customer-focused approach by diligently addressing service issues and ensuring customer satisfaction
• Demonstrate self-motivation and commitment to completing assigned duties efficiently
• Standby duties may be required, including working at customer premises as needed

Required competencies and certifications

• Proficient in Microsoft Operating Systems (XP, Vista, Windows 7, 2000, 2003, 2008) for desktop and server support in end-user environments

Preferred competencies and qualifications

• Strong interpersonal, analytical, and problem-solving skills to effectively address IT issues
• Experience working in teams and managing interactions with customers and vendors

• Define and execute a comprehensive test automation strategy aligned with project objectives, delivery timelines, and quality goals.
• Architect and develop scalable, reusable automation frameworks across web, mobile, API, and system integration layers.
• Embed automation within Agile and DevOps workflows, enabling seamless CI/CD pipeline integration.
• Establish best practices and standards for test script development, code quality, reviews, and reusability.
• Lead the design, development, execution, and ongoing maintenance of automated test suites for internet and mobile banking platforms.

• Drive automation coverage across functional, regression, API, performance, and security testing.
• Integrate automation tools and frameworks into build, deployment, and release pipelines.
• Manage automation environments, test data strategies, and continuous test validation processes.
• Lead, mentor, and develop a team of automation engineers across onshore, offshore, internal, and external teams.

• Work closely with QA Leads, Developers, DevOps Engineers, and Business Analysts to embed automation throughout the delivery lifecycle.
• Engage business and technology stakeholders by reporting on automation coverage, progress, effectiveness, and ROI.

Quality & Risk Assurance

• Ensure automation frameworks meet banking-grade security, compliance, and regulatory standards.
• Identify opportunities to optimize manual testing through automation to improve speed, quality, and efficiency.
• Drive continuous improvement by evaluating and adopting new automation tools, frameworks, and technologies.

Requirements

• Bachelors degree in Computer Science, Information Technology, or a related discipline.
• Minimum 7 years of QA experience, including at least 3 years in an Automation Lead or similar role.
• Strong hands-on expertise with automation tools and frameworks such as Selenium, Appium, Playwright, or equivalent.
• Proven experience in API testing using tools such as Postman or Karate.
• Solid understanding of CI/CD pipelines and tools (e.g., Jenkins, GitLab, Azure DevOps).
• Strong programming or scripting skills in Java, Python, JavaScript, C#, or similar languages.
• Experience working with banking or financial services systems, particularly internet and mobile banking applications.
• ISTQB Test Automation Engineer, Certified SDET, or equivalent certification is highly preferred.
• Experience with cloud-based testing platforms (e.g., BrowserStack) is an advantage.
• Exposure to performance testing tools (e.g., JMeter) and security testing frameworks is preferred.
• Familiarity with corporate banking products such as cash management, payments, FX, and trade finance is a plus.

To apply, please visit www.gmprecruit.com and search for Job Reference: V6335R36

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

We are seeking a highly motivated MEMS Wafer Fab Yield Engineer to join our advanced wafer manufacturing team. This role is responsible for driving fab yield analysis and yield improvement through strong data analytics and deep understanding of MEMS fabrication processes. The ideal candidate brings hands‑on knowledge of wafer fab yield, strong problem‑solving skills, and the ability to communicate effectively and collaborate within team and across global, cross‑functional teams.

Job Description

What a Fab Yield Improvement Engineer does at HP:

• Perform timely investigation of yield excursions, defects, and parametric shifts using data‑driven statistical analysis of fab data.

• Lead and drive yield improvement projects, from problem definition through root cause analysis, solution implementation, and sustained results.

• Develop and maintain a deep understanding of MEMS wafer fab processes, process integration, and tool interactions across the manufacturing flow.

• Partner with process integration, process, equipment, product, and operations teams to define corrective and preventive actions.

• Collaborate closely with worldwide (WW) fab, technology, and product teams to align on yield strategies, goals, share best practices, and support cross-site yield improvement initiatives.

• Prepare clear yield reports and technical presentations to communicate findings, progress, and recommendations to stakeholders.

Key Qualifications

• Bachelor or master’s degree in Materials Science, Chemical Engineering, Mechanical Engineering, Physics, or a related discipline.

• More than 2 years of experience in MEMS or semiconductor wafer fabrication, with exposure to fab processes, yield analysis, or defect investigation. Hands‑on experience in process integration or yield improvement is an advantage.

• Hands on experience of SPC, yield pareto analysis, defect density, or fab data analysis.

Individuals who do well in this role at HP typically possess:

• Strong understanding of semiconductor or MEMS wafer fab processes.

• Solid analytical and problem‑solving skills across multiple technical disciplines, with strong attention to detail.

• Good project management skills, including timeline, risk, and resource management.

• Strong interpersonal skills with the ability to work independently and in cross‑functional teams.

• Ability to perform under tight timelines in a fast‑paced manufacturing environment.

• Strong communication skills, including written, presentation, and influencing skills.

• High ownership, accountability, and an agile, results‑oriented mindset.

• Strong team player with a collaborative attitude.

• Willingness to travel overseas periodically for short‑term business trip.

• Ability to work in a cleanroom environment.

  
  Disclaimer
  This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Full Stack Engineer (Google Cloud)

Role Overview

We are seeking a skilled Full Stack Engineer with strong hands-on experience in Google Cloud Platform (GCP) to design, develop, and maintain modern, scalable web applications. The successful candidate will work across the entire stack — from front-end interfaces to back-end services and cloud infrastructure — and play a key role in delivering secure, high-performing solutions.

Key Responsibilities

• Design, develop, test, and deploy full stack web applications across front-end and back-end layers.
• Architect, deploy, and manage applications on Google Cloud Platform (GCP), leveraging services such as Compute Engine, Cloud Run, GKE (Kubernetes Engine), Cloud Functions, Cloud SQL, Firestore, BigQuery, Pub/Sub, and Cloud Storage.
• Build and maintain CI/CD pipelines to enable automated builds, testing, and deployments.
• Develop and integrate RESTful APIs and microservices.
• Collaborate with product managers, designers, and other engineers to translate business requirements into technical solutions.
• Ensure applications adhere to security best practices, performance benchmarks, and scalability requirements.
• Monitor, troubleshoot, and optimize application performance using Cloud Monitoring, Cloud Logging, and Error Reporting.
• Participate in code reviews, contribute to technical documentation, and mentor junior team members where applicable.
• Stay current with emerging cloud-native technologies and recommend improvements.

Core Requirements

• Bachelor's Degree or Diploma in Computer Science, Computer Engineering, Information Technology, or related discipline.
• Proven hands-on experience as a Full Stack Engineer, developing production-grade applications.
• Strong front-end development skills (e.g., React, Angular, or Vue.js) with proficiency in HTML5, CSS3, JavaScript/TypeScript.
• Solid back-end development experience using languages such as Node.js, Python, Java, Go, or .NET.
• Hands-on experience with Google Cloud Platform (GCP), including deploying and managing workloads on services such as Cloud Run, GKE, Compute Engine, Cloud Functions, Cloud SQL/Firestore, BigQuery, Pub/Sub, and Cloud Storage.
• Experience implementing CI/CD pipelines (e.g., Cloud Build, GitHub Actions, GitLab CI, Jenkins).
• Strong understanding of containerization (Docker) and orchestration (Kubernetes).
• Proficiency in working with relational and NoSQL databases.
• Familiarity with Infrastructure as Code (IaC) tools such as Terraform or Deployment Manager.
• Solid understanding of API design (REST/GraphQL), microservices architecture, and event-driven systems.
• Knowledge of cloud security best practices, IAM, and networking on GCP.

Preferred / Nice-to-Have

• Google Cloud certifications, such as:

• Google Associate Cloud Engineer

  Google Professional Cloud Developer

  Google Professional Cloud Architect

• Experience with multi-cloud or hybrid-cloud environments (AWS, Azure, Cloudflare Workers).
• Exposure to DevOps practices, observability tools, and SRE principles.
• Experience working in Agile/Scrum environments.
• Familiarity with serverless architectures and event-driven design.

Soft Skills

• Strong analytical, problem-solving, and debugging skills.
• Excellent communication and collaboration abilities.
• Self-motivated, proactive, and able to work independently as well as in a team.
• Ability to manage multiple priorities in a fast-paced environment.

Looking for Jr. Full Stack Engineers with 1-4 years of relevantexperience (Google Cloud)

Working Location : Central

**We regret to inform that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

• Ensure the consistent delivery of high-quality Printed Wiring Boards that meet customer specifications and industry standards by managing quality assurance processes and serving as the primary liaison for customer service accounts.
• Responsible for driving continuous improvement, resolving quality-related customer issues, and upholding compliance with regulatory and internal quality systems to enhance customer satisfaction and product reliability.

Customer Quality Liaison

• Act as the primary contact for customer quality-related inquiries and complaints
• Coordinate resolution of customer issues through root cause analysis and corrective actions

Quality Control Oversight

• Monitor inspection and testing procedures are followed
• Monitor product conformance to IPC and customer-specific standards

Documentation & Compliance

• Maintain quality records in accordance with ISO 9001 and internal QMS protocols
• Prepare and submit quality reports to customers and internal stakeholders

Process Improvement

• Identify recurring quality issues and lead initiatives to improve manufacturing pro
• Support implementation of Problem-Solving methodologies

Audit & Review

• Participate in internal and external audits
• Ensure readiness for customers and regulatory inspection

Training & Support

• Provide guidance to production teams on quality standards and procedures
• Assist in onboarding new staff with QA related training
• Support new product introduction (NPI) with quality input and validation

Requirements:

• Degree in any Engineering discipline (Quality Engineering preferred) in a manufacturing environment
• Min 2 years of experience in Quality Assurance activities/operational
• Good communication, report writing and presentation skills
• Good analytical skills with ability to work effectively
• Independent, decisive and good at problem solving
• Able to adapt in a fast-paced environment
• Preferred with knowledge of PWB manufacturing processes
• Proficiency in Microsoft Office

5 days' work week
Electronics MFG Industry
Loyang Area

Interested candidates, please forward a detailed resume and email to audris@alignrecruitment.com.sg

Align Recruitment Pte Ltd

License No: 20C0253

Attention: Pan Hong (Reg No. R2094728)

[Job ID: 1471592]

About the Role:

We are looking for a driven and personable Sales Engineer to join our growing team. In this role, you will manage the full sales cycle—from site visits to deal closure—while building lasting relationships with clients in the engineering and industrial sector. Full technical training will be provided, making this an excellent opportunity for sales professionals who are eager to learn and grow.

Responsibilities:

• Manage end-to-end sales process, including client meetings, site visits, and project follow-ups
• Provide sales support with basic technical guidance (training provided)
• Generate new business from both existing accounts and new projects/tenders
• Leverage company-provided leads to expand your pipeline
• Meet and exceed annual sales KPIs

Requirements:

• Strong interpersonal and communication skills
• Basic understanding of mechanical engineering concepts (training available)
• A “farmer” mindset—focused on nurturing long-term client relationships
• Positive, proactive working attitude
• Valid driving license required (company car provided)
• Candidates with own transport will receive a monthly allowance of $800

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Cesky Ong Zhi Rong

EA Personnel Registration Number: R24121422

EA License No.: 07C5771

Overview

We are looking for a Full-Stack Engineer with a strong foundation in software engineering and modern AI technologies. The ideal candidate will have experience building scalable applications, integrating LLM-powered solutions, developing AI agents and RAG systems, and working across the full software development lifecycle. Experience with the Pega platform will be highly advantageous.

Responsibilities

• Analyse business needs, identify problem statements, and recommend technology solutions to address organisational objectives.
• Gather, document, and validate functional and technical requirements with stakeholders.
• Collaborate with business users, vendors, and project teams to clarify requirements, review solution designs, and obtain stakeholder buy-in.
• Design, develop, test, and deploy scalable software applications that deliver a high-quality user experience.
• Prepare and maintain architecture diagrams, technical specifications, and system documentation.
• Work closely with Business Analysts to refine requirements, elaborate user stories, and define acceptance criteria.
• Support Quality Assurance activities, including test automation, defect analysis, and bug resolution.
• Partner with DevOps teams to automate build, deployment, and release processes.
• Drive adoption and ensure smooth deployment of new solutions through stakeholder engagement and support.
• Assess enhancement requests, evaluate system impacts, and recommend implementation approaches.
• Investigate and resolve application incidents, perform root cause analysis, and implement preventive measures to minimise recurrence.
• Apply software engineering best practices including code reviews, unit testing, and continuous improvement methodologies.
• Ensure solutions comply with IT governance, security standards, quality management policies, and organisational guidelines.

Requirements

• Degree or Diploma in Computer Science, Information Technology, Computer Engineering, Electronics Engineering, or a related discipline.
• Technical Skills
• Strong proficiency in Python, including backend application development and API design using frameworks such as FastAPI.
• Experience designing AI agent systems with capabilities such as memory, tool usage, planning, and autonomous task execution.
• Familiarity with REST APIs, web services, secure file transfer (sFTP), and system integration patterns.
• Experience with software testing, code quality practices, and automated testing frameworks.
• API integration with platforms such as OpenAI, Anthropic, Gemini, and AWS Bedrock

Solid understanding of Large Language Models (LLMs), including:

• Tokenisation
• Context windows
• Prompt engineering

Hands-on experience building AI-powered applications and agentic workflows using frameworks such as:

• LangChain
• LangGraph
• LlamaIndex

Experience designing and implementing Retrieval-Augmented Generation (RAG) solutions, including:

• Vector databases (e.g. Pinecone, Weaviate, FAISS)
• Embedding models and retrieval strategies
• Integration with enterprise knowledge sources

Platform & Infrastructure

Experience in one or more of the following areas:

• Agile software development methodologies
• CI/CD pipelines and DevOps practices
• Cloud platforms such as AWS or GCP
• Serverless architectures
• Docker and containerisation technologies

Preferred Experience

• 2–5 years of experience with the Pega platform.
• Experience integrating AI and LLM capabilities into Pega applications and workflows.
• Hands-on participation in at least one end-to-end Pega project implementation.
• Experience delivering medium to large-scale enterprise or government technology projects.
• Consulting, Business Analysis, or solutioning experience.
• Experience facilitating workshops, gathering requirements, and translating them into Agile user stories and acceptance criteria.
• Experience supporting SIT, UAT planning, execution, and stakeholder sign-off.

Key Responsibilities

• Assess contract terms, technical drawings, and equipment specifications to ensure compliance with design requirements.

• Ensure timely delivery of design and engineering production drawings for awarded projects.

• Coordinate with designers, classification societies, vendors, and clients to meet specifications for newbuilding, repair, and conversion projects.

• Interpret design drawings and apply classification rules and maritime regulations in project execution.

• Address technical comments in writing, propose solutions, and prepare drawing remarks for distribution to relevant stakeholders.

• Prepare production drawings based on class-approved or client-issued design documents.

• Develop technical drawings including general arrangements, outfitting plans, lifesaving equipment layouts, structural strength calculations, block construction plans, weight estimates, weight control reports, and lifting arrangements.

• Support commercial newbuilding and repair teams during tender exercises by developing preliminary design concepts aligned with tender requirements.

• Work both independently and collaboratively within a team environment.

Requirements

• Polytechnic Diploma or Bachelor's Degree in Marine Engineering, Naval Architecture, or an equivalent qualification.

• Minimum 3–5 years of engineering experience in structural design within the marine or offshore industries.

• Proficient in Microsoft Word, Excel, PowerPoint, and AutoCAD.

• Willingness to travel overseas for technical meetings as required.

• Ability to interpret marine structural drawings, understand technical specifications, and engage in client discussions.

• Strong analytical, communication, and interpersonal skills.

If you are passionate about playing a key role in the success of a Top notch MNC, we want to hear from you!

Our client is a well-established brand in the Information Technology and Services Domain who is now looking for a passionate and driven Software Developer. This is an amazing opportunity for individuals who want their career in new technology with a global multinational organization.

ABOUT THE ROLE

We are looking for enthusiastic and motivated fresh graduates or junior IT professionals to join our team. This is an excellent opportunity for candidates who are passionate about technology and eager to build a career in Oracle and Talend. No prior experience with Oracle or Talend is required, as comprehensive training will be provided.

ROLES AND RESPONSIBILITIES

• Shortlisted candidates would be sent for 2 months exclusive training in Oracle & Talend.
• On completion of classroom training, selected candidates will be placed on the software/application development team of our ongoing project at our MNC client, where they will receive On-The-Job Training (OJT) on various aspects of Software Development Life Cycle.

REQUIREMENTS

• Fresh graduates or candidates with 0–2 years of IT experience.
• Diploma or Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or a related discipline.
• Knowledge of at least one programming language (e.g., Java, Python, C#, C++, JavaScript, or similar).
• Basic understanding of SQL or databases is an advantage but not mandatory.
• Strong analytical, problem-solving, and communication skills.
• Eagerness to learn new technologies and work in a collaborative environment.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please email your UPDATED CV in Microsoft Word format to saridha@aven-sys.com and keerthana@aven-sys.com. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name : Saridha Sekar

Reg No. : R1325954

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy policy.

Job Summary

The T&C (Testing & Commissioning) Engineer will lead testing and commissioning activities for large-scale industrial and solid waste management projects, ensuring operational readiness and compliance with project specifications.

Responsibilities

• Lead and execute testing and commissioning activities for large-scale solid waste management projects including Waste to Energy (WTE), sludge incineration, materials recovery, and food waste treatment facilities
• Apply engineering expertise to operate and validate systems in industrial/process/utilities projects such as waste, water, oil & gas, and power sectors
• Collaborate with project teams to ensure testing and commissioning meet technical and safety standards
• Manage schedules and resources to complete testing and commissioning within project timelines
• Troubleshoot and resolve technical issues during commissioning to ensure system functionality and reliability

Required competencies and certifications

• Hold an EICA certification
• Possess at least 5 years of hands-on experience in testing and commissioning of large-scale solid waste management or industrial/process/utilities projects
• Have a relevant engineering degree or certification

Other Information

• Location: Tuas
• Working Days: 5.5 days per week (Mon to Fri: 8.30am to 5.30pm; Sat: 8.30am to 12.30pm, alternate Saturdays)
• Contract Duration: 2 years
• Salary: $10,000 per month
• Benefits: 2 months gratuity upon completion of 2 years
• Availability: Able to commence ASAP
• Shortlisting: Shortlisted candidates will be invited for interview

☑ Good Bonuses

☑ Near MRT

☑ Family Friendly Environment

Job Description:

• Design, implement, and support enterprise network infrastructure.
• Deliver network solutions and infrastructure projects.
• Monitor, troubleshoot, and optimize network performance and security.
• Manage technology lifecycle, documentation, and operational support.

Requirements:

• At least a Diploma with at least 4 years of network engineering experience.
• Strong knowledge of routing, switching, security, and network protocols.
• Hands-on experience with Cisco, Check Point, Palo Alto, and Fortinet technologies.
• CCNP and firewall certifications preferred, with strong troubleshooting skills.

Loh Puay Hwee David

EA License | 24C2215

EA Registration Number | R1766892

Client introduction

Our client is an established fintech headquartered in Singapore, operating across payments and foreign exchange with a footprint spanning Asia and beyond, including a significant client base in Greater China. As the business scales towards its next stage of growth, they are building out the senior layer of their reliability function.

They are hiring a newly created Lead Site Reliability Engineer (Quality Assurance) sits within the SRE team as a key technical hire and co-lead with the Head of SRE.

Job responsibilities

• Own production reliability across the FX and payments platforms - monitoring, observability, alerting, and the definition and tracking of SLIs and SLOs.
• Lead incident response end to end, including war rooms, post-mortems, root-cause analysis and the upkeep of operational runbooks.
• Strengthen quality assurance across the platform - improving test coverage, release sign-off standards, and modernising legacy test automation toward more automated and AI-assisted workflows.
• Support client API integration from sandbox to production, including liquidity provider onboarding and conformance testing.
• Act as the technical escalation bridge between clients, internal users and engineering, supporting China-based clients directly on production and integration issues.
• Lead business continuity and disaster recovery testing, including failover, recovery and audit evidence preparation.
• Contribute to DevOps and tooling improvements across reliability, testing and support.
• Coach and uplift a team of junior SRE and QA engineers, setting standards and mentoring on best practice as the function matures.

Job requirements

• At least 6 years of experience in site reliability, production support, platform engineering or technical operations, ideally within fintech, payments, FX, trading systems or another high-availability environment.
• Strong hands-on troubleshooting across production systems, logs, APIs and application behaviour.
• Hands-on quality assurance exposure - test automation, release support or regression testing - as the role spans both reliability and quality.
• Working knowledge of API integration and comfort in client-facing or client-support situations; sandbox-to-production experience is an advantage.
• Solid fundamentals across cloud and containers (AWS, Docker, Kubernetes), monitoring and observability tooling (Grafana, Prometheus, OpenSearch, CloudWatch), and scripting (Python, Java, Bash).
• People management or team-lead experience is necessary.
• Sound grounding in incident management, RCA and BCP/DR practice.
• Professional spoken and written Mandarin proficiency is required to communicate directly with China-based clients and stakeholders, support production issues, and manage API integration activities.
• Suited to someone hands-on today who wants to grow into a broader leadership role. Candidates requiring relocation to Singapore are welcome to apply. Relocation expenses will not be provided for this position.

Why you should join them

• A newly created, high-visibility role as second-in-command within the reliability function, with a genuine path to grow into a deputy or co-leadership position through succession planning.
• Direct exposure to senior engineering leadership, reporting to the Head of Engineering and working alongside the infrastructure team.
• Broad ownership across reliability, quality, client integration and incident management, with room to shape how these run rather than inherit a fixed playbook.
• A modern technical environment with real appetite for AI-assisted tooling across testing, RCA and support, plus a hybrid working arrangement.

JL
Reg. No. R1766249
BeathChapman Pte Ltd
Licence no. 16S8112