Total 788 system engineer job vacancies in Quality Assurance / Control category in Australia

Job Summary

We are looking for an experienced Senior Control and Software Engineer to lead the architecture, design, and implementation of advanced control systems and embedded software for next-generation Solid State Transformers (SST), high-power grid-tied inverters, and large-scale renewable energy integration platforms.

You will drive technical innovation in medium- and high-voltage power electronics for applications including data center electrification, utility-scale renewables, microgrids, EV charging infrastructure, and smart grid systems. This senior role involves end-to-end technical ownership—from control strategy definition and system modeling to real-time software implementation, validation, and field deployment—while mentoring junior engineers and influencing technology roadmap decisions.

Key Responsibilities

· Lead the development and optimization of real-time control algorithms for Solid State Transformers (multi-stage, multilevel, and resonant topologies) and grid-connected inverters operating in both grid-forming and grid-following modes.

· Architect and implement robust embedded software and firmware (C/C++) for DSP, FPGA, and multi-core microcontroller platforms, ensuring high-performance bi-directional power flow, fault management, and seamless grid interaction.

· Define and execute system-level modeling and simulation strategies using MATLAB/Simulink, PSCAD/EMTDC, or similar tools; drive automatic code generation and model-based design workflows for production systems.

· Lead renewable energy integration efforts, including PV, wind, and energy storage systems, with advanced techniques such as virtual synchronous machines (VSM), hierarchical power management, droop control, inertia emulation, and compliance with stringent grid codes (IEEE 1547, IEC 61727/62116, Grid Code requirements).

· Oversee Hardware-in-the-Loop (HIL), Power-Hardware-in-the-Loop (PHIL), and Controller Hardware-in-the-Loop (CHIL) testing campaigns; lead performance validation, stability analysis, and certification activities.

· Provide technical leadership across cross-functional teams (hardware, systems, test, and firmware) on protection schemes, communication architectures (IEC 61850, Modbus TCP, DNP3, OPC-UA), cybersecurity, and functional safety.

· Mentor and guide junior control/software engineers; conduct design reviews, establish best practices, and drive continuous improvement of the control software platform and architecture.

· Identify and solve complex technical challenges related to harmonics, resonance, grid disturbances, renewable intermittency, and high-power SiC/GaN-based converters.

· Contribute to R&D strategy, intellectual property (patents), technical publications, and product roadmap planning to maintain technology leadership in SST and renewable integration.

Required Qualifications

· Master’s or PhD in Electrical Engineering, Power Electronics, Control Systems, or a related field (PhD strongly preferred).

· 7+ years of hands-on industry experience in control and embedded software development for high-power power electronics, with direct involvement in inverters, DC-DC converters, or Solid State Transformers.

· Demonstrated expertise in:

o Advanced control techniques (Model Predictive Control, resonant controllers, adaptive control, PLL/synchronization algorithms, dq0-frame and stationary-frame control).

o Real-time embedded programming (C/C++, RTOS, bare-metal) and FPGA firmware (VHDL/Verilog).

o Model-based design and automatic code generation workflows.

· Strong background in power electronics modeling, renewable integration, microgrid systems, and grid compliance testing.

· Proven track record of leading technical deliverables from concept through to successful product deployment or field operation.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicond

Salary: $3000-$4500

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc
• Knowledge in using CMM Machine
• At least 2 years relevant experience

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at emily.fong@atomrecruit.com

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Position Summary

QA Engineer (Process Quality Control) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Responsible for backend semiconductor packaging processes which ball drop, bumping, singulation, back grind and mounting.
• Effectively providing engineering support in order to meet production output, product quality, efficiency, productivity, yield, cycle time and safety requirements.
• Responsible to analyse the process data and identify improvement actions and work on the improvement.
• Drive permanent solutions to resolve chronic process and quality issues.
• Responsible to evaluate new product/material/process during the pilot run and ensure process readiness.
• Responsible for the relevance of the Work Instructions, Control Plan, FMEA & Process Control documents.
• Responsible to prepare the line for internal & external audits and the follow-up actions.
• Any other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical, Electrical, Materials, Chemical, or related field).
• Prior experience in semiconductor packaging processes (ball drop, bumping, singulation, back grind, mounting) would be advantageous.
• Experience in process engineering, yield improvement, and quality control.
• Proficiency in data analysis and statistical process control (SPC).
• Familiarity with Failure Mode and Effects Analysis (FMEA), Control Plan, and Process Control documentation.
• Hands-on experience with new product/material/process evaluations.
• Ability to work in a fast-paced manufacturing environment.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

Interested candidates do send in your resume to wendykhoo@recruitexpress.com.sg

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

• Well Established Company
• Basic $3800 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8am to 5.30pm

Job Responsibilities:

• To participate in procedures for Supplier Management process such as supplier on-boarding, selection and approval process by assessing and evaluating supplier profile; visiting and auditing of supplier facility and process, initiating supplier quality agreement review, and establishing good partnership with suppliers
• To evaluate and monitor supplier performance and collaboration with suppliers to identify opportunities for enhancements and improvements
• To support new supplier/material qualification by ensuring that all supplier on-boarding related documentations and action are complete, and that quality of purchased material meets the required standards and expectations
• To communicate and work closely with external supplier sand internal stakeholders (Procurement, Warehouse and Manufacturing) on supplier/material qualification related projects, material quality related issues. To address on purchased material failures/defects and derive proper preventive and corrective action plans through SCAR system
• Implement quality inspection standards on incoming and outgoing inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA) , non-conformance investigation reports and customer complaints and publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms etc) to ensure system compliance and ready for Management Review
• Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits
• Review audit findings and develop action plans to drive continuous improvements
• Perform any other duties as assigned

Job Requirements:

• Possess minimum Diploma in Quality Management / Engineering / Manufacturing or related field with minimum 2 years of relevant working experience in handling audits and ISO documentation in manufacturing industries
• Knowledge in Supplier Management
• Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301
• Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)
• Familiar with 8D and 5W problem solving methodology

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Location: North Singapore
• Office Hours, Monday – Friday
• Competitive Salary + AWS + Variable Bonus
• Medical Benefits Provided

About the role:
Join a global leader in the Life Sciences and Medical Technology industry. We are seeking a Quality Engineer to support quality assurance and continuous improvement initiatives across manufacturing, supply chain, and product development functions. This role offers the opportunity to work in a highly regulated environment and contribute to the quality and reliability of innovative scientific and healthcare products.

Job duties:

• Investigate product and system quality issues, perform root cause analysis, and recommend corrective actions.
• Support product testing activities by reviewing and evaluating test methods, protocols, and reports to ensure compliance with quality and regulatory requirements.
• Utilize statistical tools and data analysis techniques to drive quality improvements and support risk-based decision making.
• Collaborate with cross-functional teams to review engineering drawings, specifications, inspection plans, and manufacturing procedures.
• Establish critical quality characteristics and inspection requirements for components, sub-assemblies, and finished products.
• Drive continuous improvement initiatives using quality management tools and methodologies.
• Participate in product change control activities to ensure compliance with applicable quality and regulatory standards.
• Support risk management processes throughout the product lifecycle, including identifying, assessing, and mitigating quality risks.
• Monitor industry regulations, standards, and best practices relevant to medical devices and life science products.
• Contribute to quality system activities and support internal and external audits where required.

Job requirements:

• Bachelor's Degree in Engineering, Quality, Biomedical, Mechanical, Manufacturing, or a related scientific discipline.
• Minimum 3 years of experience in Quality Engineering within Medical Device, Life Sciences, Biotechnology, or regulated manufacturing environments.
• Knowledge of validation activities including Equipment Qualification (IQ/OQ/PQ) and process validation principles.
• Understanding of quality standards and regulations such as ISO 13485, ISO 14971, or FDA Quality System requirements will be advantageous.
• Experience with quality tools such as CAPA, FMEA, DOE, statistical sampling, and root cause analysis.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.
Delete personal data as it is not required at this application stage.
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Poh Tze Qi (Kayley) | R2197837
ScienTec Consulting Pte Ltd | 11C5781

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform first article evaluation (FAE/FAI) and on new parts/products that are newly manufactured.
• Conduct shipping judgement meeting for first-time manufactured and shipped-out products.
• Handle quality claims from customers through corrective action request (CAR/NCR): evaluate, verify and disseminate information to respective departments.
• Manage claims to ensure root causes are analyzed and effective corrective/preventive action are being taken.
• Ensure prompt follow-up and replies on claims.
• Revise department‘s work standard according to job-flow changes.
• Conducts process audits according to schedule.
• Assist production lines on solving quality matters; discuss and feedback on any improvement.
• Provide engineering support and advice to other members.
• Coordinate monthly quality meeting.
• Supervise subordinate.
• Adhoc job duties as assigned.

Requirements:

• Degree in Mechanical/Mechatronics Engineering
• Prefer 2-3 years of relevant experience
• Entry level applicants with the correct aptitude will also be considered.

Bedok, East Area
Manufacturing Industry
5 days work week

Interested candidates, please send a detailed resume via email to hr@tempserv.com.sg

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Information:

• Salary Range: $3000 - $4000 Basic + $70 Meal allowance
• Working Hours: Mon-Fri, 8am-5.30pm
• Company Transport: Jurong / Tampines

Responsibilities:

• Handling customer quality issues & continuous improvement activities of products & processes.
• Coordinate with quality related issues to follow-up on effective corrective/preventive actions.
• Perform activities such as process optimization, benchmarking through statistical tools/software.
• Handle external audit in accordance to Technical Specifications & ISO standards.

Requirements:

• Degree in Chemical/Chemistry/Materials Science/Mechanical Engineering
• Experience in servicing customers' quality related issues in semiconductor industry
• Knowledge of DOE & JMP and QC tools (FMEA, SPC and 8D format report writing)
• Familiar with IATF16949 requirement is a plus. Entry level are welcome to apply.
• Willing to work overtime when needed and travel overseas 2-3 time per month.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

• Ensure adherence to quality standards, regulations, and compliance with government, aviation authorities, and customer requirements.
• Liaise with customers, vendors, and suppliers to address non-conformances, conduct root cause analysis, and implement corrective actions.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001, AS9100, NADCAP).
• Review and update quality procedures and control guidelines regularly.

Requirements:

• Degree in Mechanical, Aeronautical Engineering or equivalent.
• At least 5 years of experience with ISO9001/AS9100 QMS and NADCAP standards.
• Strong knowledge in fishbone diagrams, FMEA, and 5-whys analysis.
• Capable of reading and interpreting technical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description

· Knowledge in ISO 9001/14000 and TS 16949 QMS will be an added advantage

· 5 days work week (Monday to Friday)

· good Pay + AWS + variable Bonus + Good Benefit

Responsibility:

· Responsible for daily production line audit, managing the document control process for Quality Management Systems in compliance with ISO 9001/14000 and TS 16949 quality standards.

· Liaise with internal and other departments, customer and supplier for all quality related issues.

· Drive quality improvement activities for achieving quality goal and to meet customer’s requirements.

Requirements:

· Degree/Diploma in any Engineering discipline with

• Good Pay + Good allowance + Good Bonus
• Interested candidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’s your resume to 98332779 ( no Calls)
• Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

· Knowledge in ISO 9001/14000 and TS 16949 QMS will be an added advantage

· 5 days work week (Monday to Friday)

· good Pay + AWS + variable Bonus + Good Benefit

Responsibility:

· Responsible for daily production line audit, managing the document control process for Quality Management Systems in compliance with ISO 9001/14000 and TS 16949 quality standards.

· Liaise with internal and other departments, customer and supplier for all quality related issues.

· Drive quality improvement activities for achieving quality goal and to meet customer’s requirements.

Requirements:

· Degree/Diploma in any Engineering discipline with

Interested Candidates please send an updated resume / CV in Ms Word format Whatsapp your Resume detail to 98332779 (SMS only without call).

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )