Total 780 software engineer job vacancies in Quality Assurance / Control category in Australia

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

You will be part of the team managing Outsourced Semiconductor Assembly and Test (OSAT). 

YOUR ROLE 

• Demonstrate competency in process engineering and collaborate with the regional team to ensure compliance with test processes and controls at OSATs.
• Responsible for the overall success of test and finishing related policies, processes, tools, and solutions deployment to OSATs.
• Responsible for overall finishing (visual inspection, packing etc) compliance at OSATs
• Demonstrate competency in process engineering and collaborate with the regional team to ensure compliance with test processes and controls at OSATs.
• Drive improvement of OSAT test and finishing capabilities and processes to conform to ST requirements.
• Benchmark OSAT test and finishing capabilities and solutions
• Manage NPI qualification to MP process for test and finishing across all OSATs, including technical gap analysis, review, and approval.
• Manage process changes related to test at OSATs.
• Contribute New Product Introduction (NPI) qual to Mass Production (MP) process for test and finishing across all OSATs
• Responsible for Unit Level Traceability (ULT) with 2DID, to formalize, deploy and implement at OSATs test and finishing
• Perform value engineering analysis for test and lead value engineering projects at OSATs.

YOUR SKILLS & EXPERIENCES

• Bachelor degree in any engineering, or relevant discipline
• 2 to 5 years of experience in semiconductor industry
• Experience in NPI, qualification, production and finishing procedures and processes in semiconductor EWS and test manufacturing.
• Familiar in packing requirement for shipment
• Experience with data analysis techniques and tools, and understanding of test application requirements, including data integrity, STDF, SBL, SYL, SPL, and PAT (EWS and FT).
• Proficient in project management and familiar with OSATs.
• Familiar with semiconductor tester platforms, handlers, and probers.
• Experience with test analysis tools, such as silicon.DA, is an advantage.
• Self-motivated and self-driven, able to commit to and meet deadlines.
• Proficient in Excel and PowerPoint, and able to present and communicate ideas and recommendations effectively.
• This position requires travel to the region and may require travel on short notice.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Summary

You will be deployed to our client who is a leading government technology agency driving digital transformation and innovation in the healthcare sector. You'll be part of the test engineering services team, providing end-to-end performance testing. You will also be expected to support multiple projects within the organisation.
Responsibilities

• Analyzing documents (e.g., design, requirements, architecture, diagrams, flowcharts) to obtain an understanding of the requirements
• Identifying the required test scenarios, test case preparation, test data preparation and document traceability matrix to ensure sufficient test coverage
• Execute test cases and test plans to support the quality assurance activities throughout the software lifecycle
• Write and prepare technical performance test plan
• Run test cases, analyze the result and with solid debugging skills
• Communicate to leads on the issues that are reported and its impact to schedule, budget or quality of the product
• Work closely with Software Quality Engineer/Manager to understand the Performance Testing requirements
• Evaluate application architectures and design performance test plans
• Establish performance test objectives, acceptance criteria, workload profiles and use case scenarios
• Measure and analyze performance data (workload, system and application)
• Solve complex problems and provide clear and concise reports with recommendations

Requirements

• Must have at least 8 years of hands-on experience in end-to-end performance testing lifecycle and methodology
• Experienced in C programming, Core Java or .Net
• In-depth knowledge and experience working with Micro focus LoadRunner enterprise and LoadRunner Cloud
• Experience in mobile performance testing in Android and iOS devices
• Good understanding in Mobile automation and how to use ADB command and Xcode project structure/simulators
• Experience in defining test metrics, conducting analysis and result reporting
• Experience in using performance monitors like Dynatrace, Cloudwatch, Prometheus and APM
• Experience in test automation tools like Katalon or Selenium is advantage
• Excellent communication (spoken and written) skills and be able to work independently

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at kaixinnchew@morganmckinley.com for more information.

Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.

Morgan McKinley Talent Solutions

Morgan McKinley Pte Ltd EA Licence No: 11C5502

EAP Registration No: R2196712

EAP Name: Chew Kai-Xinn

Overview
We are looking for a Technical Test Engineer (Interfaces) to support testing activities for a large-scale financial payment platform initiative. The role focuses on validating system integrations and interfaces, ensuring that application behaviour aligns with technical and functional requirements.
The successful candidate will be responsible for designing and executing test cases, performing integration and system testing, and supporting defect management throughout the testing lifecycle.
Responsibilities

• Design, develop, and execute comprehensive test cases and test scenarios based on both technical and functional specifications.
• Conduct integration testing and system testing to validate application behaviour against defined change requirements.
• Perform manual testing activities, including exploratory testing and participation in user acceptance testing when required.
• Identify, document, and track defects through to resolution, ensuring proper communication and collaboration with development teams.
• Work closely with test automation engineers to identify test cases suitable for automation and improve overall testing efficiency.
• Understand and execute business scenarios and test cases to validate system functionality and integration workflows.
• Support overall testing lifecycle activities, including test preparation, execution, defect management, and reporting.

Requirements

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering, or a related field.
• Minimum 5 years of experience in software testing, quality assurance, or system testing.
• Experience in integration testing and interface testing, particularly for complex systems or platforms.
• Good understanding of software testing methodologies, defect lifecycle management, and testing best practices.
• Experience with test management and defect tracking tools (e.g., JIRA, TestRail, HP ALM, or similar).
• Familiarity with API testing, interface validation, or message-based integrations is good to have.
• Excellent analytical and problem-solving skills with high attention to detail.
• Ability to collaborate effectively with developers, automation engineers, and business stakeholders.

gem.cabria@manpower.com.sg (R1434374), stating the position as the subject title in the email.

Jireli Gem Mejia Cabria | EA License No. 02C3423 | Personnel Registration No. R1434374

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by ManpowerGroup Singapore for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Job Purpose
The Control and Instrumentation Engineer (C&I) plays a pivotal role in ensuring theseamless design, programming, integration, and operation of BMS solutions. Thisrole is responsible for translating project specifications into efficient,reliable, and sustainable systems that optimize building operations. Bypreparing and reviewing detailed technical drawings, developing robust controllogic, and integrating advanced technologies, the C&I Engineer contributesto the effective monitoring and control of critical building functions such asHVAC, lighting, and energy management

The C&I Engineer ensures system performance and reliability by overseeing installations,commissioning, and troubleshooting, while fostering collaboration amongstakeholders and delivering solutions aligned with client needs and industrystandards. This position supports the organization’s commitment to innovation,energy efficiency, and sustainability.

Key Responsibilities:

1.    Design and Documentation:

• Review, analyze, and prepare detailed C&I drawings, including PLC panel layouts, network architecture, and wiring diagrams.

• Ensure all designs comply with project specifications and industry standards.

2.    Programming and Control Logic Development:

• Program BMS devices, including PLCs and controllers, using industry-standard programming tools.

• Develop, test, and validate control logic and sequences for various BMS operations.

3.    System Integration:

• Integrate BMS systems with other building systems like HVAC, lighting, and fire safety.

• Configure and troubleshoot communication protocols such as Modbus, BACnet, and Profibus.

4.    Installation and Commissioning:

• Supervise the installation of BMS hardware and ensure compliance with approved designs.

• Commission BMS systems, ensuring seamless operation and performance optimization.

5.    Troubleshooting and Maintenance:

• Diagnose and resolve issues in hardware, software, and network communications.

• Provide ongoing maintenance and support to ensure system reliability.

6.    Collaboration and Coordination:

• Liaise with project managers, clients, and other stakeholders to ensure alignment with project timelines.

• Provide technical support and training to clients and end-users.

Qualifications and Skills:

1.    Educational Background:

• Degree or diploma in Electrical, Electronics, or Control Systems Engineering.

2.    Technical Skills:

• Proficient in reading and interpreting BMS drawings and PLC wiring diagrams.

• Hands-on experience with programming tools for PLCs and controllers (e.g., Siemens, Schneider).

• Strong understanding of control logic and BMS protocols.

3.    Experience:

• Minimum 3 years of experience in BMS engineering or related fields.

• Familiarity with semiconductor or industrial environments is a plus.

4.    Soft Skills:

• Strong problem-solving and analytical skills.

• Excellent communication and teamwork abilities.

5.    Certifications (Preferred):

• Certifications in BMS or PLC programming (e.g., Siemens STEP 7, Schneider EcoStruxure).

6.  Good interpersonal skills and communication skills & Cooperative

7.   We are seeking candidates proficient in Mandarin to effectively communicate
with Mandarin-speaking clients.

Employer questions
Your application will include the following questions:

• Which of the following statements best describes your right to work in Singapore?
• What's your expected monthly basic salary?
• Which of the following types of qualifications do you have?
• How many years of design engineering experience do you have?
• How many years' experience do you have as an Instrumentation and Control Engineer?
• How many years' experience do you have in the construction industry?
• How many years' experience do you have as an Electrical and Control Systems Engineer?

What you'll be doing

• Design, develop, and implement robust machine control software for complex manufacturing equipment

• Collaborate with cross-functional teams to integrate software solutions with hardware components

• Troubleshoot and resolve software-related issues in production environments

• Continuously optimize and enhance existing software systems to improve performance and reliability

• Document code, processes, and procedures to ensure maintainability and traceability

• Stay up-to-date with industry trends and best practices in machine control software engineering

What we're looking for

• Bachelor's degree in Computer Science or a related field

• Minimum 3 years of experience in machine control software development, preferably in the semiconductor or manufacturing sectors

• Proficiency in programming languages such as C++, C#, Python, and PLC programming

• Strong understanding of real-time embedded systems, control theory, and industrial automation protocols

• Excellent problem-solving and analytical skills to identify and resolve complex software issues

• Ability to work collaboratively in a team environment and communicate effectively with cross-functional stakeholders

• Familiarity with software development best practices, including version control, testing, and documentation

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or submit your resume to ref68@trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg 

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: John Angeline

EA Personnel Reg No: R1544851

QA/ QC Engineer

5 days, 8.30am-6.15pm

Salary: $2500- $4500

Location: Ubi 

Key Responsibilities:

Quality Assurance & Inspection:

• Perform first-article, in-process, and final inspections for CNC-machined and molded components.
• Ensure compliance with engineering drawings, GD&T, and customer specifications.
• Operate and program quality inspection equipment, including 3D scanners, CMM, height gauges, calipers, pin gauges, and microscopes.

Quality Systems & Compliance:

• Support ISO/AS quality management system requirements, ensuring documentation and traceability are maintained.
• Develop inspection plans, control plans, and quality checklists for new and existing parts.
• Conduct regular audits of machining and molding processes.

Problem Solving & CAPA:

• Perform detailed root cause analysis for non-conformances and implement effective Corrective and Preventive Actions (CAPA).
• Liaise with internal stakeholders (production, engineering, supply chain) to resolve quality issues in a timely manner.
• Engage directly with customers to address quality concerns, communicate findings, and build strong technical relationships.

Continuous Improvement:

• Drive initiatives to improve yield, reduce scrap, and enhance process capability.
• Recommend and implement improvements in machining, measurement, and quality control methods.
• Train operators and technicians in quality standards, tools, and inspection practices.

Requirements:

• Diploma or Degree in Mechanical, Manufacturing, or Materials Engineering 
• Minimum 3-5 years of quality control experience in CNC machining or precision manufacturing environments.
• Proven exposure to diverse materials such as plastics, rubbers, steels, aluminium, and rubber moulding.
• Proficiency in using quality inspection tools (3D scanner, CMM, height gauges, callipers, pin gauges, microscopes).
• Strong understanding of GD&T, tolerance analysis, and metrology.
• Hands-on knowledge of ISO 9001 or other quality standards.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Quality Assurance Engineer (ISO)

• Office Location: Loyang, Singapore
• Working Hours: Mon – Fri 8am – 5.30pm,
• Monthly Salary: Basic up to $4000 + AWS + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract

Company Overview

The company specializes in delivering high-precision solutions for complex moulding applications, supporting clients from initial concept through to full-scale production. With a strong focus on quality and collaboration, the company helps transform ideas into commercially viable products. As the company continue to grow, the company remain dedicated to advancing our capabilities and driving progress within the industry.

Responsibility

• Participate in supplier management activities, including onboarding, evaluation, facility audits, and review of quality agreements to build strong supplier partnerships.

• Monitor and assess supplier performance, collaborating to identify improvement opportunities and drive quality enhancements.

• Support new supplier and material qualification, ensuring documentation completeness and compliance with material quality standards.

• Coordinate with suppliers and internal teams on qualification projects, material issues, SCAR processes, and corrective actions.

• Implement and maintain quality inspection standards for incoming and outgoing materials, ensuring timely closure of CAPA, non-conformance reports, and customer complaints.

• Lead Material Review Board (MRB) meetings, maintain ISO documentation, conduct audits, and develop action plans to ensure compliance and continuous improvement.

Requirement

• Diploma in Quality Management / engineering / Manufacturing or related field
• Minimum 2 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.
• Familiarity with supplier management processes
• Familiarity with Quality Management Systems including ISO 9001, ISO 14001, ISO 13485, and ISO 22301
• Proficient in quality tools such as PFMEA, Control Plans, and Gage R&R (Repeatability & Reproducibility)
• Proficient in structured problem-solving tools such as 8D and 5 Whys methodologies.
• Good interpersonal and communication skills, with the ability to coordinate effectively.
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Chen Hoe Nam | EA Personnel License: R25158678

Looking for a qualified Engineer with a Diploma and/or Bachelors Degree in Mechanical Engineering with around 5 years of experience in the heavy structural fabrication industry.

The suitable candidate must be familiar with workshop processes in terms of welding, fabrication sequences, lifting methodologies, job allocation, and prioritizing. Soft skills to manage a multi-racial workforce with various skill and trade levels. Able to explain to the shopfloor staff the fabrication sequences and the ability to visualize the challenges ahead of time is a pre-requisite. Able to achieve and deliver set targets on time, maintaining a high level of safety. Knowledge and compliance with statutory safety requirements are a must. Ability to rise up to the occasion when the situation demands it.

Preference will be given to candidates with suitable experience and valid residence status, willing to travel a long distance, and with exposure to site work.

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

Interested candidates do send in your resume to wendykhoo@recruitexpress.com.sg

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)