Total 1,126 process engineer job vacancies in Others category in Australia

• Assist in planning, coordinating, and supervising daily construction site activities to ensure smooth project execution.
• Ensure all works are carried out in accordance with approved drawings, specifications, and project requirements.
• Liaise with consultants, subcontractors, and relevant parties on technical and site coordination matters.
• Monitor site progress and report any delays, discrepancies, or issues to the Project Manager or Site Manager.
• Conduct site inspections to ensure quality control and compliance with construction standards.
• Assist in resolving technical issues and provide engineering support to site operations.
• Ensure compliance with safety regulations, company policies, and statutory requirements on site.
• Prepare and maintain site documentation, including reports, method statements, and records.
• Coordinate material delivery, usage, and site resources to ensure efficiency and minimize wastage.
• Any other duties as assigned by the HOD.

Job Requirement

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• Required skill(s): MS Office, AutoCad.

Responsibilities

• Prepare inspection request forms to verify installations comply with project drawings
• Supervise and monitor installation work to ensure quality and adherence to specifications
• Oversee general project works to maintain progress and standards
• Prepare red mark drawings reflecting site modifications and report to engineering for As-Built drawing submissions
• Develop and revise shop drawings, incorporate consultant feedback, and manage re-submissions
• Monitor material delivery schedules and control project costs by adjusting work arrangements according to the project timeline
• Commission project equipment and conduct risk assessments to ensure compliance with QEHS policies, procedures, and work instructions
• Conduct site testing follow-ups, lead project safety meetings, and coordinate site activities with stakeholders
• Maintain awareness of legal requirements, environmental impacts, and occupational safety and health hazards related to work activities

Required competencies and certifications

• Minimum 5 years of experience working on LTA projects
• Degree in Civil Engineering

Preferred competencies and qualifications

• Ability to work independently and self-motivate under tight schedules
• Effective communication skills and readiness to commence work on short notice

Key Responsibilities

• Analyze current production processes and identify areas for improvement
• Design, develop, and implement process enhancements to increase efficiency and reduce waste
• Monitor process performance and troubleshoot issues in real-time
• Collaborate with cross-functional teams (production, quality, maintenance) to ensure smooth operations
• Develop and maintain process documentation, SOPs, and technical reports
• Conduct root cause analysis and implement corrective/preventive actions
• Ensure compliance with safety, environmental, and regulatory standards
• Support new product introduction and scale-up activities
• Utilize data analysis tools to track KPIs and process performance

Requirements

• 5+ years of experience in process engineering or manufacturing environment (adjust based on seniority)
• Experience in industries such as manufacturing, oil & gas, pharmaceuticals, or electronics is preferred

- Prepare costing for new project

- Prepare shop/As built drawing for submission to authorities using Autocad software

- Prepare documents for the submission of drawings to relevant authorities

- Going out to sites for checking and inspection

- Familiar with Autocad software/Microsoft Office

- Familiar with CP code for Fire Protection eg. CP52, CP10 etc

- Able to plan work schedules, meeting with main con

- Need to attend site co-ordination

- Any other related work assigned by the Company

- NITEC/Higher NITEC in Mechanical or related field

- With working experience in Singapore preferred

- Able to work and communicate with people from many other countries

- Salary will be according to experience

Roles & Responsibilities:

· Report to Project Manager

· Submission of technical proposal, monitoring of submittals

· System design, equipment selection & procurement.

· Attend meetings, interactions and responsibility towards client’s requirement

· Project planning, site control and execution.

· Leading project team, meeting objectives and targets.

· Ensure full compliance with contract specification, terms and conditions.

· Resolve operational issues and conceptualization of master plan.

· Progress reporting and claims

· Any ad-hoc duties assigned

Requirements:

· Degree in Mechanical/Environmental Engineering or Equivalent

· Singaporean/PR

· 3-5 years site experience

· Dynamic, self-motivated, proactive, and results-oriented

Ayyakannu Buvaneswaran , Ministry of Recruiters Pte Ltd , EA: 12C5314, EA Personnel : R1217664

• Provide basic technical support for desktops, laptops, and office IT equipment.
• Assist users with troubleshooting hardware and software issues.
• Install and set up computers, printers, and common applications.
• Respond to support requests via email, phone, or ticketing system.
• Ensure smooth day-to-day IT operations for employees.
• Support network connectivity issues such as Wi-Fi and VPN access.
• Maintain records of issues and solutions for future reference.
• Coordinate with IT teams or vendors for complex problem resolution.
• Perform routine system checks and updates.
• Deliver friendly and professional support to end users.

Responsibilities

As a System/ Network Engineer, you will be responsible for the following:

• System And Network,
• Able to configure CISCO, Fortinet, Juniper, Firewall & Antivirus, and other security software.
• Experience with CISCO core switches, Access Points (Wireless) such as Aironet / Meraki / HP Aruba is a plus.
• Familiarize with CISCO Network LAN & WAN design.
• Pre-sales to Point to Point and Client VPN.
• Setup and perform troubleshooting with network technical skills, including CISCO Routers, CISCO Switches, wireless devices, Fortinet Firewalls, Load Balancers, and system management tools like Network Analysis.
• Install WINDOWS Server O/S, WIN 11, Microsoft 365, Microsoft Platform for Servers, and PCs with hands-on experience in setup and configuration.
• Knowledge of setup/configure VMWare, Exchange Server, SQL, and Virtual Server, along with hardware configuration experience (Server, external backup, UPS) in FAS System, HPE Storage, Synology NAL, etc.

Job Description

• Rack/stack IT Equipment.
• Installation/configuration of various OS (Windows, Linux, Vmware).
• Work closely with Team Leader to meet system delivery milestones.
• Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.
• Assist in day-to-day operation of the System Delivery team.
• Carry out other technical related duties that may be required.
• Design and implement LAN, WAN, VPN, and wireless networks.
• Configure and Network security appliances such as firewalls, routers, and switches.

Requirements

• Diploma/Degree in Information Technology, Computer Science, Engineering or equivalent
• Able to configure/design and provide consultation for Cisco Switches, Router and Fortigate Firewall
• 3 – 10 years of relevant experience in server implementation / operation / administration for Vmware / Storage / Redhat / Windows.
• Good analytical and problem-solving skills
• Possess initiative with positive working attitudes
• Strong teamwork, communication and interpersonal skills
• Ability to work after office hours/weekend for systems preventive maintenance

Position Summary

The Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently. 

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position. 

Responsibilities 

• Ensure process integrity for machines related to production 

• Monitor process via SPC chart/real time monitoring system 

• Work on continuous improvement projects 

• Perform lots on hold and disposition 

• Support in recipe setup and qualification for production 

• Troubleshoot process-related issue 

• Collect engineering data 

• Prepare manufacturing documents 

• Maintain good housekeeping in the production area 

• Any other ad-hoc duties as assigned by reporting supervisor 

Requirements 

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines 

• Prior process experience in Backend Processes: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing would be advantageous

• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage 

• Experience working in semiconductor manufacturing environment 

• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc. 

• Able to work under various shift patterns. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night 

Position Summary

The Process Engineer is responsible for development and establishment of production process. 

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.  

• Establish, review and update specifications, workflow, quality and safety related documentation for production line.  

• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.  

• Process sustaining and control through SPC and periodic defect Pareto Analysis.  

• Lead and drive SPC control.  

• Review and maintain FMEA, Control plan, OCAP with cross-functional teams.  

• Handle and manage customer audits and 8D reports.  

• Provide disposition for engineering and production lots.  

• Conduct process characterization and qualification to establish process baseline. 

• Coordinate and liaise with vendor/suppliers on process issue or quality issue.  

• Support customer NPI activities and internal engineering activities.  

• New material, process & machine development and qualification.  

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line 

• Any other ad-hoc duties as assigned by supervisor 
  

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field  

• At least 3 years of experience in semiconductor manufacturing industry and working in cleanroom environment  

• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry 

• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report  

Position Summary

The Process Engineer (Lithography) is responsible for the development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.  
• Establish, review and update specifications, workflow, quality and safety related documentation for production line. 
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.  
• Process sustaining and control through SPC and periodic defect Pareto Analysis.  
• Lead and drive process control measures such as SPC, FDC/KPC and RCA towards zero defects.  
• Lead and drive continuous improvement activities in area of quality, productivity, cycle time, cost and process control automation. 
• Review and update FMEA, Control plan OCAP with cross-functional teams. 
• Coordinate and liaise with vendor/suppliers on process issue or quality issue. 
• Support customer NPI activities and internal engineering activities. 
• New material, process & machine development and qualification. 
• Handle and manage customer audits and 8D reports.  
• Provide disposition for engineering and production lots. 
• Conduct process characterization and qualification to establish process baseline.
• Any other ad-hoc duties as assigned. 

Requirements

• Minimum Bachelor’s Degree in Materials Science, Microelectronics, Chemical Engineering or relevant engineering degrees.
• Minimum 3-years hands-on Lithography process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line.
• Knowledge in process engineering, process control engineering and yield enhancement.
• Experience in SPC, DOE, FMEA, and 8D reports

Position Summary

The Process Associate Engineer is responsible to support the engineering activities as well as the daily production activities reliably and efficiently. 

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position. 

Responsibilities

• Ensure process integrity for machine is in place for production  

• Process monitoring via SPC / real time monitoring system 

• Work on process improvement projects 

• Handle disposition and on hold lots 

• Maintain good housekeeping in the production area  

• Support in recipe setup and qualification for production 

• Assist to troubleshoot process-related issue 

• Engineering data collection 

• Other ad-hoc duties as assigned 

Requirements 

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline 

• Minimum 2 years’ experience working in semiconductor manufacturing environment 

• Minimum 2 years of experience working in Die Preparation (Backgrind, Dicing and Laser-grooving), Pick and Place, and Molding/ De-bonding processes.

• Knowledge in basic SPC and Microsoft Office 

• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night) 

As an Advanced Packaging Characterization Engineer within Advanced Packaging Technology Development (APTD), your responsibilities include but are not limited to providing package development characterization and failure analysis support for development test vehicles, qualifications, customer returns, new product introduction, and general test failures. You are the domain expert on advanced packaging characterization methodology and is responsible for establishing relevant analysis methods needed to support technology development. You will also have a thorough understanding of the product package assembly and process flow, to work with Process Integration, Process Development, and Product Engineering groups ensuring failures are classified and root cause fixes implemented.

Responsibilities and Tasks

Conduct Electrical Characterization

• Understand PFA techniques available for de-processing failures

• Understand assembly and test process

• Perform electrical verification to confirm failures

• Establish best known method for de-processing package

Provide Data Analysis

• Understand backend test flows, qualification methodologies and be able to pull relevant information

Communicate with Internal/External Groups

• Document failure analysis techniques used to isolate failure for other groups

• Quick, responsive analysis and feedback of PFA results to Product, Process Integration, Reliability, Assembly, RMA, and QRA

• Ensure the PFA lab understands best method to obtain results and ensure lab is ready for analysis of new designs

Provide Technical Expertise

• Conduct TMO training and FA certification

• Serve as technical SME and mentor, contributing to the growth of technical capabilities within the team and fostering a culture of continuous learning.

• Participate actively in technical events such as conferences, workshops and forums to share knowledge and BKM across the network.

• Engage industry experts and vendors on cutting-edge FA tools and techniques required for Advanced Packaging development roadmap.

Maintain Equipment

• Coordinate calibrations (external to Micron)

• Procure parts as needed

• Coordinate host vendors to support equipment repair

Manage Laboratory

• Consistently upholds and promotes Micron’s safety standards, ensuring all activities are conducted in a safe and compliant manner.

• Manage laboratory to comply with TS, ISO14001 and OHSAS requirements.

• To manage the exhaust and scrubber systems of the FA Lab.

• To maintain records and procedures as per Micron GOPs

Education and Experience

• PhD, Master’s, or Bachelor’s degree in Materials Science, Chemical Engineering, Electrical/Electronics Engineering or related discipline. 

• 4+ years of experience in the semiconductor process, preferably in R&D or technology development or failure analysis field, with strong expertise in failure analysis methodologies and techniques.

• Hands-on proficiency with key analytical tools and methods, including: SEM, EDX, FIB, TEM, AFM, FTIR, XPS, X-ray, CSAM, Ion Milling, delayering, and decapsulation techniques.

• Strong communication skills with the ability to collaborate effectively across internal teams and external partners.

• A mindset that emphasizes customer focus, continuous improvement, and striving for excellence.

  Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Job Summary:

We are seeking a highly skilled SAP Order to Cash (O2C) Process Consultant to join our SAP IT team. The ideal candidate will be responsible for the planning, scoping, design, testing, implementation, rollout and support of SAP Order to Cash processes across the Mobility Aftermarket business division. You will collaborate with stakeholders to improve and optimize business processes and ensure the successful delivery of SAP projects and enhancements (R/3 as well as S/4).

Key Responsibilities:

• Lead the design and implementation of SAP Order to Cash (SD module and related components) solutions.
• Analyze business requirements and translate them into SAP functional specifications.
• Design scalable solutions to address the global O2C business requirements.
• Integrate with other SAP modules like MM, FI, and WM, and external systems (e.g., CRM, e-commerce platforms).
• Lead workshops and gather requirements from business users and process owners.
• Create functional specifications for custom developments (RICEFW objects).
• Perform unit, integration, and user acceptance testing (UAT) support.
• Stay current on SAP best practices and new technologies (e.g. S/4HANA, BTP, Cloud, etc).

Maintain and ensure live systems are up and running smoothly 24/7. Equipped with technical disciplines in System-Level Maintenance with knowledge of Radio Communications, Basic Networking Skills, Computer/Servers Management, Embedded Systems and/or UPS.

• Involve in one or more teams in supporting and maintaining systems.
• Report to the Team Lead/Service Delivery Manager to fulfil contractual KPI.
• Assist Team Lead/Service Delivery Manager to deliver contract deliverables within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures.
• Liaison with procurement and vendors.
• Perform after-office hour standby for fault activation.
• Arrange and attend monthly meetings with customers.
• Provide engineering services and support to facilitate equipment adequacy, obsolescence, configuration and design.
• Provide or recommend technical solutions to mitigate RF communication systems/equipment failures.
• Frequent travelling and working at customer premise(s).
• Occasional backfill for Integrated Work Force (IWF) at customer premise(s).

Requirements:

• Higher Nitec or Diploma in Electronics/Electrical/Mechatronics/Computer Engineering or equivalent.
• Preferably with 2-3-year experience in related Engineering.
• Positive work ethics and team player.
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns).
• Preferably with experience in System-Level Maintenance in the following disciplines: (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Proficient in MS Office (Words, Power-point & Excel).
• Preferably with Class 3 Driving License.

The Contractor shall be responsible for sizing and designing all electrical equipment in accordance with local regulations, standards and codes of practice. The design shall adhere to good engineering practice and this Specification. The Contractor’s detailed design shall be submitted to the S.O. for approval.

The submissions by the Contractor in accordance with the Specifications shall include but not be limited to the following:

Electrical network single-line diagrams with details of circuit breakers, busbars, sizing of cables, busways, transformers, protection devices, measurement, and interlocks;

Single line diagrams, detailed control circuit schematic, wiring and termination diagrams for high voltage switchgear, transformers, diesel generators, low voltage switchgear, motor control centres, distribution boards, lighting systems, lighting distribution boards and other equipment packages