Total 85 software test engineer job vacancies in bayan lepas

• To assist engineers to perform engineering related tasks such as buyoff on hardware, test program, equipment setups, etc.
• To perform qual related tasks such as repeatability tests
• To perform reject low yield or RMA verifications and sampling test based on special requests with engineer’s guidance

The Junior Packaging Engineer is an entry-level engineering role designed for fresh graduates or early-career engineers eager to build expertise in packaging design, testing, and qualification within a world-class technology company.

You will work closely under the guidance of Senior Packaging Engineers, gaining hands-on experience across packaging design, lab testing, vendor coordination, and cross-functional collaboration. This role is a strong foundation for a long-term engineering career at Western Digital.

Key Responsibilities : 

Design & Documentation

• Assist in packaging design and development activities under senior engineer supervision
• Prepare and maintain packaging specifications, BOMs, and technical drawings
• Support CAD modeling and packaging structure updates

Testing & Qualification

• Execute packaging tests per ISTA/ASTM protocols (drop, vibration, compression, climate)
• Record, compile, and analyze test data; prepare test reports
• Assist in packaging qualification documentation and ECO submissions
• NPI & Sustaining Support
• Support NPI packaging activities including sample preparation and testing
• Assist in sustaining engineering tasks — ECOs, deviation requests, and change implementations
• Coordinate with manufacturing teams on packaging-related issues

Vendor Coordination

• Assist in coordinating with packaging material suppliers for sample procurement
• Support supplier qualification activities under senior engineer guidance

Compliance & Quality

• Ensure work is conducted in compliance with WD quality and safety standards
• Assist in maintaining packaging documentation within WD QMS

Learning & Development

• Actively participate in training programs and technical workshops
• Shadow senior engineers on complex projects to build technical competence
• Take ownership of assigned tasks and deliver on time

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities
• Taking charge of tribology testers maintenance, spare parts inventory management and hardware upgrading activities 

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

Sustaining Staff Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA).  

Staff Product Engineers Logistic will be a critical part of our sustaining team, ensures product continuity after mass production.  We are seeking a Product Engineer who has strong back ground in Product Engineering. This role is crucial to ensure execution of sustaining projects and also proactively monitor production supply chain.  The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, and extend product lifecycle.

Key Responsibilities

•  Manage and maintain BOM system.  This will be a crucial on-going task to ensure production system operates flawlessly.  Candidate will be trained to generate and mainitain BOM of all PCP products in new Renesas system.
• Sustain multiple products lifecycles, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Generating and monitor engineering build requests to support qualification/validation builds and customer samples.
• Generate weekly yield/variance monitor report and recommend actions.
• Generate and monitor SBL/SYL updates
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Work with several data base system to generate useful reports to help drive sustaining team productivity. 

Analog and Mixed Signal Business Unit (AMS) is looking for a Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers
• Provide support for DfT, Product releases and Qualifications in Penang
• Compliance to Jedec and AEC standards
• Datasheet and automotive compliance reports
• Real time customer support for design, product and quality related issues
• Temperature/Voltage/Process characterization and production limit setting
• Product new product introduction and yield ownership
• Product BOM release and maintenance
• Excursion management for both suppliers and customers
• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams
• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times
• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

Sr Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA). 

• Specifically to carry out process capability and development programs related to Lube Process
• Carry out Lube Cpk, instruments’ EMP and Gauge R&R improvement activities
• Process transfer for new products implementation
• Plan and implement cost improvements or savings for Lube Process
• Yield/Defect/Quality improvement
• New software and project propagation buy off
• Synergy with ETA for new equipment development
• Machine PPH Improvement via process development and improvement
• Assist second source development for Lube Process
• Maintain and establish documentation and FMEA leadership for Lube Process
• New Equipment Qualification
• Continue support ACD Process
• Conduct training for new engineers and cross site teams who need to understand Lube Process.
• Subject Matter Expert for Lube Process.

Job Description

Essential Responsibilities:

• Analyze reject disks using microscopes and advanced equipment (AFM, SEM EDX, Wyko, Zygo, OSA) to identify and classify defects.
• Interpret defect analysis results, including SEM EDX data, and compile failure analysis reports.
• Lead discussions with process owners on defect issues and work to address unknown defects.
• Track and monitor yield performance using EIS and Spotfire, including viewing iris mapping and disk quality performance (KPOV).
• Coordinate with FA Tech to ensure correct reject disks are pulled for analysis.
• Develop and implement corrective and preventive actions (CAPA) to improve defect rates.

• Understand product PLM systems and maintain databases with high accuracy (Agile / SCORE / Ariba).
• Develop monthly capacity forecast models for Penang, subcontractors, Dresden, and internalization.
• Prepare factory capacity plans to support revenue targets.
• Lead monthly gross margin improvement projects, including continuous capacity improvement and internalization to internal factories.
• Proactively identify capacity improvement opportunities and collaborate with cross‑functional teams to execute action plans.
• Perform on-the-job monitoring of bottleneck equipment to ensure revenue plans are met.
• Conduct time studies for all processes (Sort, Test, Backend).
• Perform labor resource studies, planning, and optimization.
• Manage internalization project transfers from REN Power and REN P&C.
• Prepare and support company project transfer activities.
• Support NPI (New Product Introduction) project bidding.
• Develop and review factory layouts using AutoCAD.
• Understand, monitor, and improve equipment OEE, including performance maintenance.