Total 1,191 network engineer job vacancies in Others category

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

Job Description & Requirements

Support the project team in planning, scheduling andcoordinating the civil & structural works (site).

· Manage on-site construction works anddocumentation

· Assist in overseeing engineering deliverable andmulti-disciplinary works in order to meet project quality requirements.

· Ensure that on-site construction works are carriedout accordingly to local regulations and requirements and meet project qualityrequirements.

· Assist in preparing civil and structural designsand contract specifications

· Coordinate work with other disciplines such ascivil, architectural, mechanical and electrical.

· Prepare and compile related report

· Planning physical works on site through schedulingworks and agreed timelines, sequencing of construction works

· Any other ad-hoc duties assigned

Requirements:

· Minimum 7 years’ civil site experience

· Experience in LTA project will be an addedadvantage

· Able to work under fast paced environment

· Degree in Civil Engineering

RESPONSIBILITIES:

Manage site activities, vendors and sub-contractors.

Attend meeting, coordination, prepare works schedule & site supervision.

Supervise construction and civil works on site.Review project specifications, technical clarifications, and construction drawings.

Carry out works scheduling, material requisition, cost control, project supervision,and documentation.

Ensure timely and smooth progress of works.

Responsible for all aspects of site safety.

REQUIREMENTS:

Diploma/Degree in Civil Engineering.

Minimum 2 years related Project experience.

Good communication & interpersonal skills.

Excellent project skills.

Good team player and adaptable to a dynamic environment.

Duties and Responsibilities

Mechanical engineers are essential in advancing technology and innovation by constantly improving and optimizing mechanical systems to meet the needs of modern society. Here is a comprehensive list of their key responsibilities:

Designing Mechanical Systems: Mechanical engineers are responsible for creating and developing mechanical systems and products. This involves conceptualizing, modeling, and detailing designs for components or entire systems.

Analyzing and Testing Designs: Mechanical engineers perform analytical and computational assessments of designs to ensure they meet functional requirements, safety standards, and regulatory guidelines. They may also conduct physical testing and prototype development.

Project Management: Mechanical engineers often take on project management responsibilities, overseeing the entire product development lifecycle. This includes planning, scheduling, budgeting, and coordinating the efforts of a multidisciplinary team.

Materials Selection: Engineers choose appropriate materials for the construction of mechanical components, considering factors such as strength, durability, and cost. They also evaluate the environmental impact of material choices.

Thermal and Fluid Systems: In industries like HVAC, aerospace, and automotive, mechanical engineers design thermal and fluid systems. This involves optimizing heat transfer, fluid flow, and energy efficiency in systems like engines, cooling systems, and HVAC systems.

CAD Modeling and Drafting: Proficiency in computer-aided design (CAD) software is essential for mechanical engineers. They use these tools to create 3D models and detailed drawings of mechanical components and assemblies.

Manufacturing Support: Mechanical engineers work closely with manufacturing teams to ensure that designed products can be efficiently and cost-effectively produced. They may provide input on production processes, tooling, and quality control.

Quality Assurance and Control: Ensuring the quality of manufactured products is a key responsibility. Mechanical engineers develop and implement quality control procedures, conduct inspections, and address any issues related to product quality.

Research and Development: Mechanical engineers often engage in research and development activities to explore new technologies, materials, and methodologies. This can involve staying informed about industry trends and advancements.

Regulatory Compliance: Mechanical engineers must be aware of and adhere to relevant industry standards, codes, and regulations. They ensure that designs and products comply with safety and environmental requirements.

Collaboration and Communication: Effective communication is essential, as mechanical engineers collaborate with cross-functional teams, present design proposals, and provide updates on project progress. They may also communicate with clients, vendors, and regulatory authorities.

RESPONSIBILITIES:

Manage site activities, vendors and sub-contractors.

Attend meeting, coordination, prepare works schedule & site supervision.

Supervise construction and civil works on site.Review project specifications, technical clarifications, and construction drawings.

Carry out works scheduling, material requisition, cost control, project supervision,and documentation.

Ensure timely and smooth progress of works.

Responsible for all aspects of site safety.

REQUIREMENTS:

Diploma/Degree in Civil Engineering.

Minimum 2 years related Project experience.

Good communication & interpersonal skills.

Excellent project skills.

Good team player and adaptable to a dynamic environment.

our company looking for Electrical engineer with 1-5 year experience.Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan • Provide engineering support in project or plant maintenance • Coordinate internal and external audit review • Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices. • Procedures for inspection, testing and certification of electrical fixed installations. • Industrial hazards, safety and health precautions, and environmental concerns. • Installation practice and regulations, and relevant codes of practice

Min. Diploma or Degree in Electrical Engineering or equivalent • Min. 1-5 year of relevant experience in electrical work

• Liaise / Meeting / Coordination with clients, contractors and supplier.
• Preparation and submission of drawings or documents.
• Monitor site progress and arrangement of work activities.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Plan and schedules works with reference to contractual schedules

Job Requirements:

• Minimum one HDB project completion is REQUIRED

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

• Demonstrates the ability in applying AI tools to enhance workflows, improve efficiency, and support data-informed decision across team and projects

As a heating, ventilation and air conditioning (HVAC) engineer, you will ensure temperature and ventilation systems are working efficiently and safely. 

The job role of a HVAC engineer involves the following duties:  

• Surveying sites ahead of fitting heating, ventilation or air conditioning systems 
• Planning the placement of pipework, ducts and control panels 
• Installing HVAC components 
• Performing quality checks to ensure systems are working efficiently and safely 
• Carrying out maintenance on HVAC systems 
• Finding and fixing faults 
• Helping customers to reduce their energy use

Skills

• Understanding of building and construction 
• Capable of using tools and machines 
• Excellent attention to detail 
• Good customer service skills 
• Logical thinking skills 
• Ability to use your initiative. 

You will be part of a team responsible for regulating development and building works in the public streets as well as road structure safety zone to safeguard the road structure safety zone and public streets.

You will be involved in reviewing the design of both temporary and permanent works affecting the road structures and public streets, engineering risk assessment and engineering analysis, method of construction and instrumentation proposal, as well as review of geotechnical and structural instrumentation data, ensuring the construction is with accordance to LTA’s standards. In addition, you would also be involved with projects assets or Infrastructure are integrated with adjoining and adjacent developments, processing and coordinating the successful project handing over to the Authority.

Besides the opportunity to work with developers, their architectural and engineering consultants and contractors, you will also coordinate and liaise with LTA architects, planners , engineers, Asset owners on projects affecting road and road related facilities and systems.

You will also be expected to facilitate and coordinate other kinds of asset taking over procedures from developers, private owners, to the Authority.

• Knowledge in Civil / Structural Engineering

• Resourceful, analytical, able to thrive in a fast pace and demanding work environment

• Self-motivated, able to multi-task and keen to learn

• Possess initiative and keen interest to develop professional skillset

• Able to work independently and a team player with good leadership, interpersonal and communication skills

• Proactive and resourceful

• Familiarity with AutoCAD and proficient in MS Office and document control systems is an advantage

• Those with relevant experience in civil engineering design and strong understanding of construction drawings and as-built documentation works will have an advantage

As part of the shortlisting process for the role, you may be required to complete a medical declaration and / or undergo further assessment.

As part of the Process Engineering group, this position involves contributing to the development of thin film solutions for thermal management product.

The role also involves establishing and optimizing related process parameters related to dicing, mask design, plating/sputtering thin films.

Also work closely with internal cross-functional teams, external vendors and technology partners on application development from concept prototype phase to production introduction.

Roles & Responsibilities

• Develop processes to deposit conductive (metal) films by Plating, PVD Sputtering and Vacuum Evaporation.
• Develop film characterization techniques for metrology and inspection.
• Provide day-to-day operations of deposition tools - tool and process monitoring, post PM process qualification, troubleshooting.
• Prepare project updates and goals.
• Work closely with integration and test teams on developing critical to quality (CTQ)metrics, root cause analysis (RCA) and corrective actions for yield improvements.
• Work closely with equipment engineers and external suppliers on tool improvements and selection of new equipment.

Requirements

• ITE/Polytechnic/Degree in Materials Engineering or related field
• Min. 2 years of experience leading manufacturing process development in at least one of the following fields: semiconductor front or back end such as wafer bumping, dicing, mask design, plating and thin film process development.
• Experience of using UHV vacuum manufacturing equipment and associated sensors and components (Pumps, valves, pressure sensors, spectrometers, MFC's, pressure controllers, pyrometers, etc.)
• Experience working on material development and process engineering.
• Experience in statistical analysis methods and tools, design of experiment.
• Understanding of materials characterization and FA techniques
• Good communication and teamwork skills.
• Willing to work in Tuas South area.

Benefits

• Company transport will be provided at mrt.
• Transport allowance will be given.
• Additional company holidays shutdown per year will be given.
• Other staff welfare benefits.

We are looking for an Senior Engineer in Product Engineering, NAND Validation/Characterization, specializing in functional and design validation. Experienced in simulation‑based validation, failure analysis, and cross‑functional issue closure. Strong focus on automation, data‑driven validation, and applied AI/ML techniques to improve test efficiency, coverage, and debug productivity.

This role focuses on building scalable, reusable, and automated test program frameworks, including AI/ML‑driven initiatives, to support both deterministic validation flows and pseudo‑random validation (RSG – Random Sequence Generator). You will play a key role in architecting the backbone of Verilog test programs—enabling efficient development, execution, debug, and reuse across multiple products and technology nodes. Validation scope includes NAND datasheet commands, features, interfaces, and customer‑mode operations on silicon platforms. When device issues are uncovered, you will perform deep failure analysis, drive root‑cause identification, and collaborate closely with Design, Application Engineering, Product, System, and Validation teams to ensure timely issue closure and infrastructure readiness for product release.

If you are looking for a technically challenging, high‑impact, and collaborative role, STPG Product Engineering (FDV‑Verilog) offers the opportunity to work on leading‑edge NAND technologies with strong ownership and visibility.

Key Responsibilities:

• Designed and executed functional and design validation flows for advanced RG NAND devices using simulation platforms

• Developed  deterministic usage‑case tests and random sequence generators to validate NAND commands and customer‑mode features

• Performed detailed failure analysis of issues seen, root‑cause investigations (including digital and analog circuitry), and drove issue resolution with cross-functional teams

• Implemented  automation frameworks using C‑based programming, Python, and Perl to improve test development and execution efficiency

• Applied  AI/ML‑assisted techniques (data analytics, pattern recognition, anomaly detection) to:

• Accelerate failure triage and root‑cause analysis

• Identify validation coverage gaps

• Improve random sequence effectiveness and debug prioritization

• Utilized data‑driven methods and dashboards to track validation progress, defect trends, and release readiness

• For senior engineer, need to have at least 3–5 years of relevant professional working experience in a similar or related engineering role.

Skills Required:

• Bachelor’s degree in Electronics Engineering, Computer Engineering, or a related discipline

• Strong interest in design validation, characterization, and product engineering

• Proficiency in software development and scripting (e.g., C/C++, Perl, Python)

• Ability to apply AI/ML for test analytics and defect pattern analysis

• Excellent problem solving and analytical skills, with careful attention to root cause analysis

• Effective communication skills in written and spoken English, including documentation and presentation

• Ability to multitask and manage priorities in a fast‑paced development environment

• Proactive mindset toward continuous improvement and self‑development
  

  Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Axiom IT Solutions Pte Ltd is a Microsoft Gold Partner specializing in Microsoft Teams Voice, Collaboration, Security and Artificial Intelligent services. We are actively promoting the adoption of Microsoft Copilot and Copilot Studio for SME and Enterprises in Singapore. We also developed our own Axiom AI Voice agents for AI Receptions, AI Call Centers, AI reminder and AI Elderly call solutions. We have been awarded Microsoft Copilot for SME programme for customer growth, aswell as winner of Top 20 Global Copilot Customer Success stories from Microsoft.

As part of our growth plan to build Agentic AI solutions, we are looking for AI Engineers to work on expanding our business. Your primary role is to develop new features and maintain existing features in our AI Voice Agents, help customer in the design of AI agents and implementation of AI workflow and automation using Microsoft Copilot Studio or other similar software. In this role, you will be reporting to the development manager.

Responsibilities:

·       Gather customers requirements on AI agents and automation.

·       Understand customer existing process and convert into AI processes and workflow.

·       Work with customers on design and process flow.

·       Build prototype, new features and models to show to customers

·       Implement production Agentic AI solution for customers.

·       Work with internal R&D team on the development and creation of new solution integrating our AI Voice Agents with AI Task Oriented Agents.

·       Support sales team in customer meetings and presentations.

·       Create proposals and recommendations to customers

·       Provide post implementation support to customers on our AI solutions.

Pre-requisite :

·       Experience AI projects development will be advantages.

·       Software development background will be advantageous.

·       Friendly with good communication and negotiation skills.

·       Logical thinking and executions.

·       Experience in customer process automation/work flow projects.

·       Experience in Microsoft Office 365 Solutions.

·       Positive thinking, energetic, and ability to work as a team.

·       Ability to multi-task is mandatory.

Objectives of this role

• Oversee the review and permitting processes for national and local agencies
• Apply technical knowledge in the development of feasibility analyses for project specifications, ensuring that all stakeholder expectations are met
• Take responsibility for alignments and profiles, geometrics, drainage, plan development, and construction estimates
• Design and manage both small-scale and large-scale projects with an eye on safety, scheduling, and budget
• Track project progress, compiling technical reports, specifications, and calculations for internal and external parties
• Develop and maintain current project databases, and create secondary systems when necessary

Responsibilities

• Prepare plans, profiles, details, and specifications for all aspects of roadways, storm drainage, erosion and sediment control, sanitary sewers, water, and utilities
• Manage project documentation, including but not limited to contracts, development plans, construction specifications, design calculations, and schedules
• Compile drainage/detention reports, SWPPP checklists, and other technical reports and documents for agency submittals
• Oversee projects to ensure that organizational standards and safety guidelines are being upheld, and provide research and technical information to relevant management teams and project representatives
• Train and guide managers and operators to ensure that project specifications are being met, and maintain direct communication with clients and other project stakeholders
• Track project budgets by analyzing all related costs, including labor and materials

Required skills and qualifications

• Professional experience in civil engineering
• Experience in site development
• Excellent skills with design software (AutoCAD or similar)
• Strong drafting abilities, with focus on site layout and utility design
• Professional certification, such as EIT

Preferred skills and qualifications

• Bachelor’s degree (or equivalent) in civil engineering
• Proficiency in database design
• Experience with Civil 3D, and general familiarity with all Autodesk software
• Working knowledge of current compliance regulations, with eye on future legal changes
• PE licensure
• Project management experience, with emphasis on direct supervision

Roles and Responsibilities:

• Support the production work package in PEP project and ensure the objectives of each milestone are met.
• Responsible for creating and maintaining production documents and milestone report.
• Assist in analyzing workflows, production processes, and production layouts to improve efficiency and reduce waste.
• Collaborate with R&D for product development phase, provide process FMEA and assist in lab sample building and testing.
• Generate technical specifications and liaise with cross-functional departments, as well as internal and external suppliers, for the realization of production equipment.
• Responsible for the procurement of production tools and equipment through the e-procurement system and EDB procurement tool.
• Assist in managing prototype and pilot builds in close collaboration with the production work package.
• Own the qualification of manufacturing processes in cooperation with production team.
• Ensure quality control procedures to resolve production problems or minimize costs.
• Assist in cycle time studies, motion studies, and production capacity planning.
• Support the design and implementation of lean manufacturing and continuous improvement initiatives.

Job Requirements:

• Minimally a Bachelor's Degree in Industrial Engineering or a related engineering field.
• Minimum 3 years of relevant experience such as internships or project experience in process improvement, operations, or manufacturing is a plus.
• Familiar with Lean, Six SIgma or Kaizen methodologies.
• Good project management skills.
• Proficient in 3D CAD software. (E.g., Solidworks/ NX)
• Working knowledge of PFMEA, root cause analysis, and tolerance analysis.
• Able to work together and collaborate with the team effectively and efficiently.
• Possess excellent communication and interpersonal skills.
• Ability to solve problems and face challenges head on and with creativity to resolve problems.