Total 2,052 Engineering job vacancies

The Probe Product Engineer in STPG Product Engineering owns probe strategy and silicon learning at wafer test, spanning pre‑silicon design‑to‑probe staging, first‑silicon bring‑up, qualification, and high‑volume manufacturing (HVM).

This role is accountable for defining probe coverage intent, establishing limits and guard‑bands grounded in silicon behavior, and driving yield, quality, and test‑cost outcomes. The focus is on interpreting design intent, device operation, and process interactions, and translating product risk into robust, manufacturable probe strategies aligned with downstream test and customer requirements.

The engineer works closely with Design, DFT, Design Validation (DV), Process Integration, Backend Test, and Reliability teams to ensure probe solutions are technically sound, scalable, and product‑centric across the lifecycle.

Key Responsibilities

Probe Coverage Strategy & Ownership

• Define and own probe coverage intent by mapping design features, device behavior, and process risks into probe observability, screening mechanisms, trims, and guard‑bands.

• Define, release, and sustain probe test flows from first silicon through qualification and HVM, ensuring coverage objectives are met without unnecessary test overhead.

• Establish probe limits and guard‑bands based on silicon characterization, design intent, and customer specifications, with clear alignment to downstream test.

• Lead probe enablement for new product introductions (NPI) and technology ramps, identifying coverage and manufacturability risks early and driving mitigation plans.

Pre‑Silicon Design‑to‑Probe Staging & DFT Readiness

• Partner with Design, DFT, and DV teams during pre‑silicon phases to drive effective design‑to‑probe staging.

• Review and influence DFT architecture, test hooks, observability, redundancy, and trim structures to enable efficient and manufacturable probe coverage.

• Participate in pre‑silicon verification and simulation reviews to reduce first‑silicon debug risk.

• Define probe coverage intent early and ensure continuity from design features through probe and downstream test (shift‑left learning).

First Silicon Bring‑Up & Device Characterization

• Support first‑silicon bring‑up using engineering probe platforms and lab‑based characterization setups.

• Perform silicon and device‑level characterization (parametric behavior, margins, trims, stress response) to inform probe limits and screening strategy.

• Correlate early silicon behavior with probe results to validate coverage intent, identify gaps, and eliminate redundant content.

• Provide early silicon learning to accelerate probe flow stabilization and yield ramp.

Yield, Quality & Reliability Enablement

• Drive wafer‑level yield learning, bin definitions, and failure‑mode analysis at probe.

• Enable intrinsic and extrinsic screening strategies in collaboration with Reliability teams.

• Provide structured, data‑backed feedback to Fab, Process Integration, Design, and DV teams to close learning loops efficiently.

Test Efficiency & Cost Optimization

• Drive test efficiency improvements through coverage right‑sizing and flow optimization, aligned to product and market needs.

• Support wafer‑level speed (WLS) activities as part of broader probe optimization efforts.

• Balance coverage, yield, quality, and cost trade‑offs using silicon data and product risk understanding.

Data, Analytics & AI Enablement

• Leverage probe, inline, and reliability data for yield analysis, anomaly detection, and decision support.

• Contribute to AI/ML initiatives such as predictive probe, smart sampling, and test optimization.

• Apply data‑driven insights to continuously improve probe effectiveness and efficiency.

Artificial Intelligence

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Experience Level & Entry Consideration

This role is open to both early‑career and experienced engineers, with leveling (GJS) aligned to technical depth, scope of ownership, and demonstrated impact.

• Fresh Bachelor’s/Master’s / PhD Graduates

• Strong fundamentals in semiconductor devices, circuits, physics, or process technology.

• Academic, research, or internship exposure to silicon behavior, characterization, variability, reliability, or design analysis.

• Will grow into full probe ownership with mentorship, focusing on device, design, and process understanding.

• Experienced Engineers (Eligible for Higher GJS)

• Prior experience in product engineering, device engineering, process integration, silicon characterization, or design‑facing roles.

• Demonstrated ownership of first‑silicon learning, qualification strategy, yield mechanisms, or cross‑functional technical trade‑offs.

• Comfortable influencing upstream and downstream teams through technical insight and silicon‑based decision‑making.

Required Qualifications

• Bachelor’s, Master’s degree, or Phd in Electrical / Electronics Engineering, Computer Engineering (with strong hardware, circuits, or semiconductor focus), Semiconductor Physics, or related field.

• Strong fundamentals in semiconductor devices, wafer test, and product engineering.

• Demonstrated ability to use silicon behavior and characterization data to make informed probe, yield, and coverage decisions.

• Experience or strong interest in silicon learning, device behavior, yield mechanisms, DFT intent, or design‑to‑manufacturing integration.

• Strong analytical skills and ability to drive structured root‑cause analysis.

• Effective communication skills and ability to work across global, cross‑functional teams.

Preferred Qualifications

• Experience with NAND / memory products.

• Experience working directly with Design, Process Integration, or Device teams to resolve silicon or product issues.

• Exposure to probe flow optimization, yield learning, or test cost reduction.

• Familiarity with DFT verification, reliability screening, or test correlation methodologies.

• Experience with Python, SQL, JMP, or data / ML tools.

• Demonstrated ability to independently drive complex technical problems from concept through execution.

Career Growth & Impact

• Direct ownership of probe strategy and quality outcomes across the product lifecycle.

• Exposure to advanced technology nodes, customer‑driven requirements, and large‑scale manufacturing systems.

• Clear growth paths across senior technical contributor, product leadership, or people management tracks within STPG Product Engineering.
  

  Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: 70 Eunos Ave 7, Singapore 409569

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Title:

Civil and Structural (C&S) Design Engineer

JobPurpose:

To undertake the analysis, design, andcoordination of civil and structural engineering works for building andinfrastructure projects in Singapore, ensuring compliance with projectrequirements, relevant Singapore Standards, statutory regulations, and clientspecifications.

KeyResponsibilities:

• Carry out civil and structural analysis and design for buildings, infrastructure, roads, drainage systems, retaining structures, and ancillary structures.
• Prepare structural calculations, engineering reports, technical specifications, and detailed drawings for project submissions and construction.
• Design reinforced concrete, steel, masonry, and temporary works in accordance with relevant Singapore Standards (SS EN Eurocodes) and applicable National Annexes.
• Ensure all designs comply with the requirements of the Building and Construction Authority (BCA), the Land Transport Authority (LTA), and other relevant authorities where applicable.
• Coordinate with architects, M&E engineers, geotechnical engineers, contractors, and other consultants to ensure seamless project delivery.
• Prepare and support submissions to statutory authorities and address technical comments arising from authority reviews.
• Liaise with Qualified Persons (QP), Accredited Checkers (AC), clients, and project stakeholders on technical and design matters.
• Review shop drawings, BIM models, method statements, and contractor submissions to ensure compliance with approved designs.
• Attend design coordination meetings, technical discussions, and site meetings.
• Conduct site inspections and provide technical support during construction to resolve design-related issues.
• Participate in value engineering exercises to develop practical and cost-effective design solutions.
• Ensure timely completion of design deliverables in accordance with project schedules and quality requirements.
• Maintain proper records of design calculations, drawings, revisions, and project documentation.

Requirements:

• Degree in Civil or Structural Engineering from a recognised university.
• Minimum 2–5 years of relevant experience in C&S consultancy or design engineering works in Singapore.
• Proficiency in design software such as ETABS, SAFE, STAAD.Pro, SAP2000, MIDAS, AutoCAD, and Revit.
• Good knowledge of Singapore Standards (SS EN Eurocodes), BCA regulations, and local authority submission procedures.
• Familiarity with BIM processes and digital engineering practices.
• Strong analytical, technical, and communication skills.

PreferredQualifications:

• Experience in preparing authority submissions and coordinating with regulatory agencies.
• Experience in building, infrastructure, or civil engineering projects in Singapore.

Software Senior Engineer, Software Engineering 

The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.

Join us to do the best work of your career and make a profound social impact as a Senior Software Engineer on our Software Engineering Team in Singapore.

What you’ll achieve
As a Senior Software Engineer, you will be responsible for the technical support of factory test process and software that apply to Client and Server products being built. 

You will: 

• Collect issue category data and drive back to issue owners not only to solve the issue, but also improve process gaps and test coverage.  
• Contribute to the design and architecture of new or re-engineered software/storage environments to accomplish the goals of PCBA boards manufacturing testing.
• Prepare written software/storage specifications for sophisticated products from architectural diagrams and documents
• Build and review design, functional, technical and/or user documentation, as needed
• Develop, review and implement test strategies for software products and systems

Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:

Essential Requirements

• Validated knowledge of programming languages; operating systems; firmware; BIOS; device drivers; databases; system, network, operating system, and application administration; embedded software/firmware; tools and utilities
• Ability to code/debug more sophisticated programs using either written or verbal design specifications
• Experience with ICT test program development and debug
• 5–8 years of related experience with a Bachelor's Degree in IT
• Knowledge in programming language (python)
• Strong communication in English

Desirable Requirements

• Capacity to achieve proficiency of new tools, languages and operating systems with training and on-the-job experience

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

Job Description

Micron’s NAND Process Development (PD) Singapore group is looking for process development engineer to support TD activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Process module ownership involving Chemical Mechanical Planarization (CMP) process characterization and advanced process development for 3D NAND and beyond.

• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.

• Transfer CMP processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.

• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.

• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.

• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions

• Identify process simplification opportunities and drive multi-functional teams in implementation

• Incorporate best known manufacturing methods into early development phase of upcoming nodes.

• Design and implement advanced process monitoring and control methodologies.

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.

• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.

• This position requires communications and collaboration with partners both locally and globally.  Strict alignment to Micron Intellectual Property protection policy is a must.

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements

• Bachelors’/Masters in Materials Science, Chemical Engineering or Physics with minimum 5 years hands-on experience in groundbreaking CMP polishing equipment such as AMAT or EBARA, or

• PhD in Materials Science, Chemical Engineering or Physics.

• Lead and mentor CMP engineers early in their careers while driving technical excellence.

• Build, lead, grow a capable CMP team for NAND technology development

• Excellent problem-solving skills and critical decision making

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data

• Working knowledge of Design of Experiments (DoE)

• Proven ability to collaborate with local and overseas teams on projects

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.

• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously

Position: Project Engineer (ACMV)
Salary: up $6000 + Performance Bonus
Working Day: 5.5 Days (Alt Sat) (may require to work on weekends when necessary)
Working Hour: 9am - 6pm | 9am - 1pm
Working Location (office): Loyang Crescent
(may be required to be station out of office)

Job Responsibilities:

• To guarantee efficient execution, oversee all project activities, teams, and site operations.
• Effectively coordinate with subcontractors, vendors, landlords, consultants, and clients.
• Create and evaluate project safety paperwork, risk assessments, and permits.
• Assist with projects from pre-contract to completion while adhering to scope, budget, and timeline specifications.
• Examine contracts, specifications, and tenders with a particular emphasis on cost negotiation.
• Keep an eye on budget control, variation work, progress payments, and project costing.
• Create technical proposals, tender submissions, supplier quotes, and project plans.
• Attend customer and consultant meetings to discuss problems and monitor developments.
  

Qualifications & Requirements:

• At least Diploma in Electrical/Electronic or equivalent.
• Working experience in ACMV industry.

To Apply:

• You may email your resume to jj@alignrecruitment.com.sg for more information.
• Regret to inform that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
JJ Tan (Reg No. R23112681)

About the Role 

We are seeking a meticulous and technically competent Site Engineer to support our project delivery team in a role centred on Deviation and Anomaly Report (DAR) submissions, site inspections, and close liaison with LTA Qualified Persons Supervising (QPS) and site teams. The ideal candidate brings solid site engineering experience, a thorough understanding of LTA's regulatory and submission frameworks, and a proactive approach to quality and compliance management on active civil infrastructure projects. 

Key Responsibilities 

• Prepare, coordinate, and submit Deviation and Anomaly Reports (DARs) to LTA in a timely, accurate, and well-documented manner in accordance with LTA's submission protocols and requirements.

• Monitor and track all open DARs throughout their lifecycle — from initial identification and submission through to LTA review, response, and formal close-out.

• Compile and organise all supporting documentation for DAR submissions including photographs, drawings, calculations, method statements, and inspection records.

• Liaise with the design team, QPS, and LTA representatives to obtain necessary technical inputs, clarifications, and endorsements required for DAR submissions.

• Conduct regular and systematic site inspections to monitor construction activities, verifying conformance with approved drawings, specifications, method statements, and LTA requirements.

• Prepare and maintain detailed site inspection records, non-conformance reports (NCRs), and corrective action logs in accordance with the project quality management system.

• Administer and manage Inspection and Test Plans (ITPs), coordinating hold points and witness points with LTA's QPS and Employer's Representative (ER) for timely review and sign-off.

• Ensure all inspection and site activities are conducted in full compliance with Workplace Safety and Health (WSH) regulations and the project's Safety Management Plan. 

Requirements 

• Bachelor's degree in Civil Engineering, Structural Engineering, Construction Engineering, or a related engineering discipline.

• Professional registration with PEB Singapore or working towards PE registration is an advantage.

• Demonstrated site engineering experience on construction or civil infrastructure projects, with a focus on quality management, regulatory submissions, and authority liaison.

• Hands-on experience preparing and managing DAR submissions, NCRs, and ITP administration on LTA or equivalent infrastructure projects is strongly preferred and will be a significant advantage.

• Prior experience in direct liaison with LTA QPS, ER teams, or equivalent statutory authority representatives on active construction projects.

• Experience on LTA projects (e.g., MRT, LRT, road, tunnel, underground infrastructure, or bus interchange) is strongly preferred.

• Strong working knowledge of LTA's DAR submission processes, quality management systems, and regulatory compliance frameworks.

• Proficiency in reading and interpreting civil, structural, and architectural construction drawings and specifications.

• Familiarity with ITP administration, holdpoint and witness point management, and NCR close-out processes in an LTA project context.

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai

  EA License No: 23S1595 | EA Registration No: R25127838

  
  

The Senior Engineer supports photolithography process development for advanced memory technologies through hands‑on experimentation, data analysis, and yield improvement activities. This role focuses on execution excellence, disciplined learning, and collaboration, operating under guidance from senior technical leaders. Success in this role requires strong fundamentals in photolithography, analytical rigor, and the ability to translate experimental data into actionable insights. 

Main Responsibilities 

• Execute photolithography process development, optimization, and troubleshooting tasks in support of yield, quality, and performance targets. 

• Perform DOE, SPC, and statistical analysis to characterize process behavior and identify improvement opportunities. 

• Support material evaluations, defect learning, overlay analysis, and process window characterization. 

• Assist with integration learning during development and early manufacturing ramps. 

• Collaborate with cross‑functional teams including integration, etch, metrology, and yield engineering. 

Other Responsibilities 

• Document experimental procedures, results, and learnings in technical reports and presentations. 

• Support technology transfer activities under direction of senior engineers. 

• Integrates AI‑assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements. 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI‑enabled enhancements within one’s scope of work. 

Candidate Profile 

Minimum Qualifications / Experience 

• PhD, or Master’s ≥3 yrs, or Bachelor’s ≥5 yrs of relevant experience in 
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field, with foundational experience in semiconductor photolithography process development. 

Must‑Have Technical Skills 

• Demonstrated ability to contribute effectively to photolithography process development initiatives and improvement plans. 

• Deep knowledge in optics, immersion lithography, polarized illumination, and low k1 imaging  

• Proficiency in lithography simulation tools, material characterization, DOE, SPC, and basic statistical data analysis 

Must‑Have Soft Skills 

• Analytical thinking and structured problem‑solving 

• Collaboration and openness to learning 

• Clear technical communication 

• Project Management; especially in technical & technology programs  

• Demonstrates ability in applying AI tools to improve workflows, drive efficiency, and support data-informed decisions across teams and projects.

Highly Desirable / Preferred 

• Exposure to advanced lithography (193nm, 248nm, 365nm) and EUV processes 

• Hands-on experience with innovative photolithography equipment and metrology tools 

Embody Micron’s core values: 

• People – Respect, develop and empower others  

• Innovation – Drive continuous improvement and breakthrough thinking  

• Tenacity – Show grit and determination  

• Collaboration – Build trust and foster teamwork  

• Customer Focus – Deliver excellence and value 

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Cloud & Data Centre Solutions

ST Engineering Cloud and Data Centre Solutions Pte Ltd provide all aspects of cloud management, services, and solutions, from initial setup and migration to ongoing operations and optimization. Services include engineering works to design, build and provide facility management service for mission critical environments such data centres, disaster recovery, and business continuity sites.

Together, We Can Make A Significant Impact

This position involves being responsible for providing deep technical expertise to ensure the safety, reliability, and optimal performance of electrical infrastructure within the data centre. This role establishes engineering standards, supports operations teams, oversees preventive and corrective maintenance, and ensures all electrical systems meet performance and regulatory requirements. The individual will need to work effectively as part of a team and communicate professionally with colleagues, supervisors and customers.

Be Part of Our Success 

• Serve as the primary technical authority for all electrical systems in the data centre.
• Establish and maintain electrical engineering standards, technical guidelines, and best practices.
• Provide technical consultancy during design reviews, upgrades, troubleshooting, and incident investigations.
• Conduct risk assessments, system performance reviews, and technical audits.
• Oversee and validate maintenance programs for electrical equipment such as:
• High/Low Voltage switchgear
• UPS systems and batteries (VRLA/Li-ion)
• Generators and fuel systems
• PDU/RPP/STS/busway systems
• Earthing, bonding, and lightning protection
• Ensure accurate preventive and corrective maintenance execution by in-house teams and vendors.
• Monitor system health, capacity, performance trends, and operational risks.
• Drive improvements in electrical system uptime, resilience, and redundancy.
• Lead root cause analyses (RCA) for electrical incidents and develop corrective/preventive action plans.
• Maintain Single-Line Diagrams (SLDs), asset documentation, and operating procedures.
• Support electrical load studies, failure mode analysis, and lifecycle management.
• Participate in electrical design reviews and approve engineering drawings, schematics, and test plans.
• Support construction, fit-out, and system upgrade projects as the electrical technical expert.
• Lead or participate in FAT, SAT, IST, and system validation activities.
• Ensure all new installations meet technical, safety, and uptime requirements.
• Ensure compliance with applicable standards and codes (e.g., IEEE, IEC, NFPA, local electrical regulations).
• Conduct safety reviews and enforce electrical safety requirements including LOTO and PTW systems.
• Maintain up-to-date documentation, reports, electrical studies, and audit records.

Qualities We Value

• Bachelor’s Degree in Electrical Engineering or equivalent.
• At least 5 years of experience in data centre, mission-critical, or industrial electrical engineering.
• Expertise in UPS, switchgear, generators, power distribution, grounding, and protection systems.
• Experience with redundancy models (N, N+1, 2N) and Tier requirements.
• Strong analytical, diagnostic, and problem-solving skills.
• Ability to interpret electrical schematics and engineering drawings.
• Strong vendor management and project coordination capabilities.
• Excellent communication and technical documentation skills.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Who are we?

Equinix is the world’s digital infrastructure company®, shortening the path to connectivity to enable the innovations that enrich our work, life and planet. 

A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future.

Joining our operations team means being at the center of everything – maintaining and evolving critical infrastructure that powers the digital world and delivers real impact for our customers, communities and society. You’ll find belonging, purpose, and a team that welcomes you—because when you feel valued, you’re empowered to do your best work.

Job Summary

A senior, highly skilled specialist responsible for ensuring the reliability, availability, and safe operation of mission‑critical data center infrastructure through advanced controls and automation systems. The Senior Critical Facilities Engineer (Controls) applies deep expertise in BMS, control systems, and system integration to monitor, optimize, and stabilize critical facilities operations. This role operates with a high degree of independence within standard operating procedures and supports operational excellence by improving system behavior, alarm management, and control logic across the site.

Responsibilities

Facility / Infrastructure Maintenance

• Performs specialized preventive and corrective maintenance with a focus on controls, automation, and monitoring layers supporting critical facilities systems.
• Acts as a technical authority for Building Management Systems (BMS), DCOS, and associated control platforms, ensuring reliable monitoring and control of power, cooling, and life‑safety systems.
• Monitors and analyzes complex alarms, trends, and events within the BMS, independently resolving issues related to control logic, system behavior, and signal integrity.
• Leads investigation of abnormal system behavior, including false alarms, control sequence failures, sensor drift, and communication faults, recommending corrective actions.
• Supports control system interfaces across mechanical and electrical systems (e.g. chillers, CRAH/CRACs, generators, UPS interfaces), working closely with Electrical and Mechanical CF teams.
• Reviews, validates, and optimizes alarm configuration, thresholds, and escalation logic to reduce noise and improve incident response effectiveness.
• Supports configuration, testing, and validation of control strategies during maintenance windows, system upgrades, or commissioning activities.
• Implements and supports energy efficiency and optimization initiatives through improved control strategies, setpoint tuning, and automated response mechanisms.
• Works on assignments requiring significant judgment and initiative, fully understanding how controls failures or misconfigurations can impact customer infrastructure, availability, and SLAs.

Vendor Support

• Acts as the primary technical interface for controls and BMS vendors, integrators, and service providers.
• Reviews and validates vendor proposed control logic, graphics, and sequences of operation to ensure alignment with site standards and operational intent.
• Assists with the creation, review, and approval of Maintenance Operation Protocols (MOPs) and scripts related to control system changes.
• Oversees vendor execution during controls‑related maintenance, system upgrades, or retrofits, including pre‑work briefings, live supervision, and post‑work validation.
• Ensures control system documentation, network diagrams, point lists, and as‑built records are maintained accurately.

Site Administration & Incident Support

• Prepares and maintains specialized documentation for control system operations, alarm management, and automated response mechanisms.
• Identifies Single Points of Failure (SPOFs) and systemic risks within the controls and monitoring layer and recommends architectural or configuration improvements.
• Responds to on‑site incidents involving BMS failures, alarm floods, loss of visibility, or automation defects, providing controls expertise during restoration.
• Leads or contributes to Root Cause Analysis (RCA) related to controls, automation, or monitoring system failures.
• Supports on‑site teams during incidents by providing control‑system insight, diagnostic guidance, and decision support.
• Ensures controls‑related procedures, alarm management policies, and change processes are followed consistently during normal operations and incidents.

Work Orders & Additional Projects

• Completes skilled work requests related to control system changes, monitoring enhancements, and automation improvements.
• Supports commissioning, re‑commissioning, and control validation activities for new or modified infrastructure.
• Implements approved changes to controls logic, alarm strategies, and system interfaces in support of operations and improvement initiatives.
• Executes and supports complex controls‑focused projects, including BMS upgrades, platform migrations, and integration of new plant systems.
• Supports life‑cycle management and end‑of‑life replacement of controls hardware, networks, and software platforms.
• Recommends controls and automation improvement projects based on operational data, incident trends, and system performance.

Collaboration

• Collaborates closely with Electrical, Mechanical, Operations, Security, and IT teams to ensure controls systems accurately reflect facility behavior and operational needs.
• Acts as a technical mentor for engineers in the areas of BMS usage, alarm interpretation, and control system troubleshooting.
• Works with stakeholders to forecast controls‑related spare parts, licensing, and system capacity requirements.
• Serves as a senior controls subject‑matter expert during incidents, complex changes, and multi‑discipline projects.

Qualifications

• Proven experience supporting controls, BMS, automation, or monitoring systems in mission‑critical environments such as data centers, smart buildings, utilities, or industrial facilities.
• Diploma or Degree in Controls Engineering, Electrical Engineering, Mechanical Engineering, Automation, or Building Services Engineering preferred.
• Hands‑on experience with BMS / DCOS platforms, PLC‑based systems, alarm management strategies, and system integration is highly desirable.

Equinix is an Equal Employment Opportunity and, in the U.S., an Affirmative Action employer.  All qualified applicants will receive consideration for employment without regard to unlawful consideration of race, color, religion, creed, national or ethnic origin, ancestry, place of birth, citizenship, sex, pregnancy / childbirth or related medical conditions, sexual orientation, gender identity or expression, marital or domestic partnership status, age, veteran or military status, physical or mental disability, medical condition, genetic information, political / organizational affiliation, status as a victim or family member of a victim of crime or abuse, or any other status protected by applicable law. 

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Cloud & Data Centre Solutions

ST Engineering Cloud and Data Centre Solutions Pte Ltd provides all aspects of cloud management, services, and solutions, from initial setup and migration to ongoing operations and optimization. Services include engineering works to design, build and provide facility management service for mission critical environments such data centers, disaster recovery, and business continuity sites.

Together, We Can Make A Significant Impact

We are looking for a Deputy Project Manager to support and drive successful delivery of cloud projects across AWS, Azure, or Google Cloud. The role requires strong project management skills, the ability to manage P&L with discipline, and proven experience in leading cloud-based initiatives. The DPM will work closely with stakeholders, clients, and technical teams to ensure projects are delivered on time, within scope, and with measurable business impact.

Be Part of Our Success

• Planning, executing, and managing end-to-end cloud migration, transformation, or deployment projects (AWS/Azure/GCP).
• Overseeing project timelines, deliverables, and resource allocation.
• Maintain tight control of project P&L, ensuring profitability and cost-effectiveness.
• Identify project risks and develop mitigation strategies while turning challenges into opportunities.
• Drive collaboration across teams, vendors, and stakeholders to achieve project goals.
• Prepare and deliver regular project status reports to senior management and key stakeholders.
• Foster a positive, energetic, and solutions-focused culture within the team.
• Ensure compliance with best practices, company policies, and industry standards.

Qualities We Value

• 3–5 years of proven project management experience in cloud-related projects (AWS, Azure, or GCP).
• Strong understanding of cloud architecture, migration processes, and delivery methodologies.
• Demonstrated ability to manage project budgets, forecasts, and financial performance.
• Excellent problem-solving skills with a “can-do” attitude and the ability to turn challenges into opportunities.
• Strong leadership, communication, and interpersonal skills to engage cross-functional teams.
• Strong understanding of enterprise-grade cloud solutions and delivery models.
• PMP, PRINCE2, or other relevant certifications are a plus.
• Energetic, positive, and adaptable in a fast-paced environment.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Job Scope:

You will leverage AI/ML, statistics, data technologies and cloud computing platforms to develop integrated, innovative data-driven solutions which will support and advance core work and strategic goals against the backdrop of an evolving energy landscape. The key responsibilities of the officer include:

• Design, build, deploy, manage and maintain end-to-end data and AI/ML projects, as well as Big Data and Cloud platforms to meet the multi-faceted needs of a rapidly growing data-driven organization in the energy sector

• Perform project management and product owner activities for the development, testing and maintenance of enterprise data systems such as data lakes, analytics platforms and AI platforms according to the Agile methodology

• Develop and implement scalable and reliable Extract, Transform and Load (ETL) processes for the ingestion and integration of large, structured and unstructured data from a variety of data sources. This includes systems that are on-premise and cloud platforms

• Working with business users, project teams, government agencies, international organizations and industry partners to explore new AI/ML and data technologies, tools and techniques in the energy sector; and identify new deployable solutions to support and advance the companty's core work and strategic goals.

Requirements:

• Education in Computer Science, Data Science, Statistics, Economics, or other related disciplines with substantial quantitative content

• Relevant working experience, especially in handling data analytics or AI/ML projects; as well as strong knowledge of data/cloud technologies.

• Demonstrable experience in leveraging data/ML techniques such as data mining, data engineering, machine learning, natural language processing, etc.

• Demonstrable experience in programming languages like SAS, R, Python, Java, or Scala for data science and/or data processing applications.

• Excellent analytical, coordination and communication (written and verbal) skills are critical for this position.

• Background in handling data analytics as well as strong knowledge of data/cloud technologies.

• Applicants must possess an independent problem-solving mindset with a strong desire to find innovative and 'out of the box' solutions to problems.

• Applicants must possess strong interpersonal skills to engage, collaborate, build and maintain relationships with stakeholders.

• Applicant must be a committed team player, with a strong interest to shape Singapore's energy landscape and public service.

• Knowledge/experience in working with Gen AI technologies such as LLM models would be an advantage.

Working Hours: Office Hours

Contract Period: 12 months

Salary: $4500-$7500 per month (depending on job position, qualifications and experience)

Location: Pasir Panjang

EA License No.: 96C4864
Reg. No.: R26161270 JOEY TAY YI TING