Total 244 Maintenance / Repair job vacancies

1) Dismantle and Reassemble Instrumentation Equipment

• Identify potential sources of hazard prior to dismantling.
• Use correct procedures and correct method of dismantling.
• Carry out the correct isolation and disconnection procedure.
• Identify, check and prepare components.
• Apply appropriate tests and test equipment to ensure reassembly is correct and effective

2) Monitor and Maintain the condition of Instrumentation Equipment.

• Adjust instruments to meet the operating specification
• Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.
• Monitor and record what has been carried out in work history or log.

3) Diagnose Faults in Equipment.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Carry out Visual, Close and Detailed inspections on ‘Ex’ equipment.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

• Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.
• Relevant PPE is used to deal with unplanned discharges using company procedures.
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• Environmental protection and pollution control are enforced effectively with colleagues, subordinates and subcontractors.

5) Emergency Response

• Demonstrate competence during Emergency Response Drills and training exercises.
• Carry out Emergency Response role

Qualifications and Experience:

• Proven experience and/or qualified to N/SVQ/HNC/HND in Instrument Engineering or local equivalent
• 3 yrs experience desired with offshore experience preferred.
• Experience and knowledge of hydrocarbon processing systems and utilities.
• Good experience of Permit to Work, Instrument/Mechanical Isolation Standards and Risk Assessment.
• COMP ex E’X’ course preferred.
• Medically fit to offshore International standards such as ENG1 or equivalent

Responsibilities:

• Responding to and resolving fault calls referred by other technicians.
• Performing basic checks and troubleshooting on PC systems and power generators.
• Liaising with relevant authorities (like NCS and LTA in Singapore) regarding application and network issues for the VEP system.
• Troubleshooting CEPAS readers and conducting monthly power generator checks.
• Arranging the deployment of other technicians and managing liaison with LTA representatives regarding project faults. .

Requirements

• Min Nitec and above
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for performing visual and NDT inspection.
• Responsible for performing manual/mechanical/chemical cleaning.
• Work closely in accordance with Standard Operating Procedures, Data Cards, Process Controls to achieve the highest quality of work.

Requirement:

• Min Nitec in Precision/ Mechanical Engineering or relevant
• Min 2 years of NDT experience in PT,MT,UT,RT & ET

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Conduct engine disassembly from modular level to piece part level.
• Ensure all maintenance activities are conducted in accordance with engine manuals, approved technical data and regulatory requirements.
• Upkeep & maintain assigned equipment, tooling, and fixtures.
• Adhere to all applicable EHS rules and regulations and report immediately any unsafe practices/conditions.

Job Requirement:

• Minimum Nitec or Diploma in Aerospace, Mechanical Engineering or a related
• Minimum 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Good understanding of technical drawing and manuals.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Conduct engine disassembly from modular level to piece part level.
• Ensure all maintenance activities are conducted in accordance with engine manuals, approved technical data and regulatory requirements.
• Upkeep & maintain assigned equipment, tooling, and fixtures.
• Adhere to all applicable EHS rules and regulations and report immediately any unsafe practices/conditions.

Job Requirement:

• Minimum Nitec or Diploma in Aerospace, Mechanical Engineering or a related
• Minimum 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Good understanding of technical drawing and manuals.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

4 days, 12 hours AM/PM rotating shift (8-8)

Salary: Basic $2000 + $50 HP allowance + $220 Attendance allowance + OT

Location: Woodlands Checkpoint 

Job scope:

• Identification, maintenance and replacement of electronic equipment and computers.
• Liaise with government agency on return and collection of faulty or repaired equipment.
• Tracking and recording the fault patterns and trends for monthly progress reporting to government agency.
• Provide guidance to general public on the use of on-site equipment such as Fee Collection Terminals.

Requirements: 

• Possess certificate in NITEC/Electrical/Electronic or related discipline
• Able to work rotating shifts (4 day work week)
• Training will be provided

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Well Established Company
• Basic $2000 - $2700 + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Company Transport Provided at various location)
• Working hours: 5.5 days’ work week (Mon-Fri: 8am – 5pm; Sat: 8am – 12pm) / Shift Work (Day: 8am – 8pm, Night: 8pm – 8am)

Job Responsibilities:

• Operate the process to meet the conditions specified in manuals/instructions
• Operate the process equipment at site in accordance with operation plan
• To maintain and make sure that all equipment are in good working condition
• To prepare chemical solutions according to SOP and guideline
• Assist in coordination of daily maintenance, and participating in maintenance activities and shutdown/start-up of sections
• To perform 5S and ensure a secure, clean and safe work area
• Other ad hoc duties as assigned

Job Requirements:

• Minimum ITE or Diploma holder; Engineering or Chemistry field preferred
• Experience in chemical engineering and analytical procedures preferred

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Pest Control Technician

• Location: Tanjong Pagar
• Working Days: 5.5 days
• Working hours : 8am to 5pm, 8am to 12pm
• Salary : $1,600 - $2,600 (depend on experience)

Job Requirements:

• At least 1 - 2 years of Pest control experience
• Possess NEA license  & Class 3 driving license (vehicle can discuss to drive back)

Job Responsibilities:

• To ensure prompt and timely pest control service at customers’ premises
• To provide good quality service to customers
• To carry out pest inspections at customers’ premises
• To submit a service report promptly
• To maintain company equipment in good and working condition

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities

■    To ensure that reception, cleaning, engineering and employee related services are delivered to the highest standards and comply with any internal and external legislative guidelines.

■    Drive 5 stars services standard in soft and hard services to exceed expectations.

■    Develop, manage and implement the processes for all the service of building & employees related activities to meet the requirements by Client

■    Provide and manage custodial & cleaning services including recycling services in compliance with Client’s standard and policies

■    Facilitate event organized in line with the criteria of Client

■    Manage and monitor our services to ensure that services are meeting/exceeding SLA define by Client and SODEXO

■    Effectively managed the soft service and hard service team to drive and sustain a high level customers services level while maintaining team spirit to encourage openness and proactive behaviour

■    Assisting in getting quotation, raising PR/ PO in Sodexo and Client’s SAP System

Knowledge, Skill and Abilities Required

■    Minimum college education in Facilities or Real Estate Management and/ or Engineering.

■    Have experience in facility management or hospitality

■    Ability to lead a young dynamic team

■    Excellent communication and  interpersonal skills are key

■    Proactive and outgoing personality is a plus

■    Good vendor management skills

■    Ability to work in a team

Responsibilities

• Assist with site walkthroughs and coordination with tenants’ contractors for unit setup, renovation, and reinstatement works.
• Carry out routine upkeep and minor repair tasks for building systems including HVAC, electrical wiring, plumbing, and sanitary fittings.
• Perform scheduled servicing of kitchen hood filters, specifically for F&B tenants.
• Conduct regular checks on public and back-of-house areas to identify and report maintenance issues such as power trips, leaks, or cooling faults.
• Monitor and update maintenance logs, weekly building condition reports, and monthly inspection records.
• Check and maintain fire safety equipment including extinguishers, hose reels, and dry risers to ensure compliance and readiness.
• Support landlord’s team on repair and upkeep works of shared facilities and systems.
• Assist in overnight maintenance works, such as equipment replacements or major system upgrades, when needed.

Requirements:

• Nitec/Higher Nitec in Mechanical, Electrical, Air Conditioning, or relevant discipline.
• Minimum 2 years of experience in property or facilities maintenance, preferably in a commercial environment.
• Practical knowledge of building systems such as M&E, ACMV, plumbing, and basic AV support.
• A team player with a positive attitude, who is comfortable working overtime when needed.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.
Email resume to ken.ng@peopleprofilers.com
People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724
http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398
Posting Personnel: Ng Jwee Ken

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Technician (Steel Fibre)
• Working Location: Gul Circle (6 minutes walk from CR24 MRT)
• Working Hours: 5.5 days (Mon-Fri 8am-5pm, Sat 8am-12pm)
• Salary Package: Basic Salary $2,500 + VB
• Duration: Permanent

Key Responsibilities

• Operate equipment to draw steel wire and produce steel fibers.
• Maximize efficiency by optimizing raw materials and consumables like wire rods, dies, and lubricants.
• Help prepare Manufacturing Procedure Specifications (MPS) and Quality Control Plans (QCP) for different products.
• Assist in developing a Maintenance Plan for the facility.
• Support product testing and identify necessary changes to meet product standards.
• Maintain and replenish raw material and consumable supplies to ensure ongoing production.
• Collaborate with the sales team to align delivery requirements with production capacity.

APPLY NOW!!!

• Completion of Secondary 4, GCE ‘N’ or ‘O’ levels, or ITE in Engineering (Electrical, Mechanical, or Mechatronics) is preferred.
• Familiar with operating and maintaining machinery.
• Knowledge of wire drawing consumables like dies and lubricants.
• Experience with steel wire drawing equipment and butt welding equipment for joining wires is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74827 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Salary: $20/hr

Duration: 6 months

Working Days & Hours: Mon to Fri office hours, Alternate half day Sat

Location:

Bukit Merah

Outram

Bedok

Marine Parade

Tampines

Pasir Ris

Tampines North

Eunos

Punggol

Sengkang

Job Description:

• Performs picking/packing of medications under Bin Coding System

• Supports Medication Delivery Service (MDS) and PILBOX/EZYBOX Services for remote collection of medications

Job Requirements: Min Diploma in Pharmaceutical Science or similar w min 1 yr of relevant experience

Interested candidates, please submit your resume to: allylok@recruitexpress.com.sg

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

allylok@recruitexpress.com.sg

1.       Process andfacility related works.

·        Supporting newmachine builds, installations, and modifications

·        To maintain, monitorand troubleshoot existing machines.

·        Suggesting andimplementing improvements to manufacturing processes, information, andprocedures.

·        Ensure safety andhousekeeping standards are upheld.

·        Any other dutiesas assigned by supervisor.

2. Technical Skills

·        Familiarity withrobotic systems and automation technologies.

·        Experience indebugging and optimizing PLC (Programmable Logic Controller) programs.

·        Proficient introubleshooting electrical and mechanical issues in automated systems.

·        Knowledge ofpredictive maintenance techniques to minimize downtime.

·        Proficiency in MSOffice and CAD

3. Personality

·        Passion inmechanical automation technology.

·        Technicallyinclined.

·        Creative problemsolver

·        Logical Thinker

·        Committed andSelf-discipline

4.     Communication.

·        Must beco-operative and willing to work in a team.

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900