Total 30 Junior Executive level Engineering job vacancies in Johor

Compliance

•Ensure processes and practices comply with ISO9001, ISO45001, ISO 14001 and ISO 17025 to the

compliance to ISO.

•Ensure processes and practices comply with Local regulations such as DOSH and DOE requirements.

•Act as an internal auditor, carry out internal check on all department from time to time. Document all

finding(s) and follow up with responsible parties.

•Perform audit on suppliers and vendor together with subject matter experts and supply chain. Provide

recommendation report based on the audit finding(s).

Quality

•Carry out calibration program for all QC equipment from prompting operation team for calibration, liaise with calibration service provider, to record keeping of QC equipment.

•Create and review Inspection Test Plan in accordance to the agreed/ project specific Application Procedure Specification.

•Customer Key contact person for Quality related enquiry

•Coordinator of Non-Conformance Report and Root Cause Analysis

•Prepare and issue Certificate of Conformity, Material Record Book, and other related document to

complete the documentation for client.

•Enforce and comply to all quality requirements.

•Understanding test requirement to relevant material in specified ISO.

HSE

•Coordinator of HSE investigation.

•With the help from Subject Matter Expert, perform Risk Assessment, HIRARC, and EAIA.

•Enforce and comply to all Health, Safety, and Environmental requirements.

Document Control

•Control the revision of company document.

•To control distribution of document to internal and external parties.

Other duties as assigned.

1) Working Days/Hours: Monday – Friday (8.00 am – 5.33 pm)

2) Transport Allowance (Executive)

3) Annual leave 16days (1st year, prorated)

4) Sick Leave 14days

5) The Company will provide you Outpatient treatment through our Company’s panel doctors, subject to medical fee claimable capped maximum of RM1,000.00 per calendar year. Employee can utilize the said amount for Dental and optical after confirmation (probation) if not claim as outpatient treatment.

6) Group Personal Accident Insurance

7) Group Term Life and Critical Illness

8) EPF, SOCSO, EIS, HRDC

Responsibilities and Authorities:
1. Handling of quality complaints, ensure they are resolve satisfactorily with necessary counter measures taken to prevent recurrence
2. Analysis quality problem found by QC Inspectors and interacting with other departments on problem resolution
3. Recommend quality improvement actions
4. Perform routine site inspections & quality reporting ( Certificate ) to customer
5. Perform Lab analysis
6. Authorized in Inspection & Test Plan at production 
7. Authorized to train QC base on Inspection & Test Plan and Quality Control Work Instruction
8. Authorized to reject, on-hold the material in various production stage
9. To ensure equipment are comply to calibration process and keep track on the validity period
10. Knowledgeable in ISO 9001:2015 Quality Management System Awareness & Interpretation
 
Competency Requirements (Education, Training and Experience):
1. Candidate must posess at least a Bachelor's Degree of Engineering / Chemical or its equivalent
2. 2 years of working experience in Quality Syatem

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)

Kami sedang mencari Pembantu Akaun (Pengkosan Tapak) yang bertanggungjawab dan berorientasikan perincian untuk menyertai pasukan kami yang semakin berkembang.

Tanggungjawab Utama

• Menyediakan dan memantau kos projek/tapak.
• Menganalisis kos projek dan mengenal pasti varians kos.
• Sahkan invois pembekal, pesanan pembelian dan pesanan penghantaran.
• Menyediakan laporan kos untuk pihak pengurusan.
• Pantau kos bahan, buruh dan subkontraktor.
• Membantu dalam penutupan akaun bulanan dan penyelarasan akaun.
• Menyediakan laporan SST dan membantu dalam penyerahan SST, memastikan pematuhan dengan peraturan terkini.
• Mengekalkan rekod perakaunan dan kos yang tepat.
• Menyelaras dengan Pengurus Projek, Jurutera Tapak, Jabatan Pembelian dan juruaudit luaran/ejen cukai apabila diperlukan.
• Melaksanakan tugas-tugas ad hoc lain yang diarahkan oleh pihak pengurusan.

Keperluan

1. Diploma atau Ijazah dalam bidang Perakaunan, Kewangan atau bidang berkaitan.
2. Minimum 1–3 tahun pengalaman kerja yang berkaitan.
3. Pengalaman dalam industri pembinaan dan pengiraan kos projek/tapak adalah satu kelebihan tambahan.
4. Pengetahuan tentang penyediaan dan pematuhan SST adalah diutamakan.
5. Mahir dalam Microsoft Excel dan perisian perakaunan (AutoCount)
6. Kemahiran analitikal, organisasi dan komunikasi yang kuat.
7. Bertanggungjawab, teliti, dan boleh bekerja secara bebas sambil memenuhi tarikh akhir.

Faedah

• Gaji yang kompetitif
• KWSP, PERKESO & SIP
• Cuti Tahunan & Cuti Perubatan
• Peluang kemajuan kerjaya
• Persekitaran kerja yang mesra dan menyokong

我們正在尋找一位認真負責、注重細節的會計助理（現場成本核算）加入我們不斷成長的團隊。

主要職責

• 編制並監控專案/現場成本。
• 分析專案成本並找出成本差異。
• 核對供應商發票、採購訂單和送貨單。
• 為管理層準備成本報告。
• 監控材料、人工和分包商成本。
• 協助進行每月帳戶結算和帳戶核對。
• 準備SST報告並協助提交SST報告，確保符合最新法規。
• 保持準確的會計和成本會計記錄。
• 必要時與專案經理、現場工程師、採購部門和外部審計師/稅務代理人協調。
• 執行管理層指派的其他臨時性任務。

要求

1. 會計、金融或相關領域的文憑或學位。
2. 至少1-3年相關工作經驗。
3. 擁有建築業經驗和專案/現場成本會計經驗者優先考慮。
4. 具備SST編制和合規的知識者優先考慮。
5. 精通微軟Excel和會計軟體（AutoCount）
6. 較強的分析能力、組織能力及溝通能力。
7. 責任感強，注重細節，能夠在獨立工作的同時按時完成任務。

好處

• 薪資優厚
• 僱員公積金 (EPF)、社保 (SOCSO) 和就業保險計劃 (EIS)
• 年假和病假
• 職涯晉升機會
• 友善互助的工作環境

We are looking for a responsible and detail-oriented Accounts Assistant (Site Costing) to join our growing team.

Key Responsibilities

• Prepare and monitor project/site costing.
• Analyze project costs and identify cost variances.
• Verify supplier invoices, purchase orders, and delivery orders.
• Prepare costing reports for management.
• Monitor material, labour, and subcontractor costs.
• Assist in monthly account closing and account reconciliations.
• Prepare SST reports and assist in SST submission, ensuring compliance with the latest regulations.
• Maintain accurate accounting and costing records.
• Coordinate with Project Managers, Site Engineers, Purchasing Department, and external auditors/tax agents when required.
• Perform other ad hoc duties assigned by management.

Requirements

1. Diploma or Degree in Accounting, Finance, or related field.
2. Minimum 1–3 years of relevant working experience.
3. Experience in the construction industry and project/site costing is an added advantage.
4. Knowledge of SST preparation and compliance is preferred.
5. Proficient in Microsoft Excel and accounting software (AutoCount)
6. Strong analytical, organizational, and communication skills.
7. Responsible, detail-oriented, and able to work independently while meeting deadlines.

Benefits

• Competitive salary
• EPF, SOCSO & EIS
• Annual Leave & Medical Leave
• Career advancement opportunities
• Friendly and supportive working environment

Main purpose/objectives of role:

Designing light weight steel truss structure for building models, sketches, drawings, and blueprints using 2D and 3D design software and preparation quotations.

Main activities/responsibilities:

1. Responsible for detailed design of light weight steel truss, using AutoCAD software

2. Prepare light weight truss quotations

3. Prepare shop drawings and ensure accuracy of drawings

4. Prepare quantity and cutting list for light weight truss with accessories

5. Attend all relevant site inspections

6. Ensure correct and relevant fittings/accessories of installation to structure

7. To support and fully implement effective ISO 9001 – Quality Management System, ISO 9001-2015

8. Any business-related responsibilities not stated above.

Perks & Benefits

• Casual dress code
• Personal development opportunities
• Paid training and development

主要職責/目標：

使用 2D 和 3D 設計軟體設計用於建築模型、草圖、圖紙和藍圖的輕型鋼桁架結構，並準備報價。

主要工作內容/職責：

1. 負責使用 AutoCAD 軟體進行輕型鋼桁架的詳細設計

2. 準備輕型桁架報價

3. 準備施工圖並確保圖紙準確無誤

4. 準備輕型桁架及配件的數量和切割清單

5. 參加所有相關的現場檢查

6. 確保安裝的配件/配件正確且與結構相符

7. 支援並全面實施有效的 ISO 9001 品質管理體系，ISO 9001-2015

8. 以上未提及的任何與業務相關的責任。

福利待遇

• 休閒著裝要求
• 個人發展機會
• 有薪培訓和發展

Job Scope :

• Oversees the plant production operation and ensures that all work instructions and procedures are strictly followed.
• Collaborate with various party to organize, developing plans and effective scheduling of rules for optimum utilization of production capacity.
• Ensure execution of production progress are follow the production schedule within the time frame given.
• Liaising and coordinate between Admin Department, Logistic Department, Procurement Department, Sub-contractor and related person to ensure smooth of daily production.
• Collaborate and initiate to identify and diagnosing the root cause of product’s defect to improve production’s efficiency.
• Ensures the quality of the production of precast concrete components in accordance with latest approved shop drawings, work instructions, casting program & approved quality control methods.
• To perform of full inspection of daily pre-pour and post-pour inspections of precast components with consultant’s representative according to approved precast shop drawings.
• Assist in monitoring and controlling material usage and wastage are within tolerance.
• To assist Senior Production Engineer in managing a team of Production Supervisors, and workers in ensuring timely production and delivery of precast components. Disseminate through Production Executive if needed.
• Providing necessary production’s documentation to Admin.
• Maintain and implement quality control system in the factory and project sites by following the project quality manual and standard operating procedures set by the company.
• Liaising with Production Department’s member and sub-contractors for any non-conformance for pre-pour inspection, trains workers whenever necessary and as required.
• Any other tasks which may be assigned by the management from time to time.

Job Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil Engineering) or equivalent.
• 2-3 years of experiences in Precast Industry
• Knowledge of Autocad would be an advantage
• Good communicative skills, able to interact with people of all levels and teamwork
• Team player

Perks & Benefits

• Free snacks / Happy hours
• Company trips
• Medical insurance
• Personal development opportunities

初級製造工程師（中文流利）

• 男性和女性

• 必須會說中文

• 歡迎應屆畢業生申請

• 薪資：2500 馬幣起（視經驗而定）

工作範圍：

• 監督生產過程，確保以安全、有效率的方式完成高品質的工作。

• 與其他工程師聯絡，制定改善生產、降低成本和減少勞動需求的計畫。

• 診斷生產線中的問題，並提供建議和訓練。

• 制定安全程序和規程，既要考慮到工人的福祉，又要最大限度地減少碳足跡。

• 隨時了解工程和生產的進展，並與同事分享知識。

• 辨識、記錄和報告不安全行為。

• 分析生產的各個方面，並提出改進建議。

福利待遇

• 附近公共交通
• 中心位置
• 彈性的工作時間
• 免費小吃/歡樂時光
• 醫療保險
• 開放文化

Junior Manufacturing Engineer (Chinese Speaker)

• Male & Female

• Chinese Speaking is a must

• Fresh graduate encourage to apply

• Salary: RM2500 to above (depends on experience)

JOBSCOPE :

• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.

• Liaising with other engineers to develop plans that improve production, costs, and labor required.

• Diagnosing problems in the production line and providing recommendations and training.

• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.

• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.

• Identifying, documenting, and reporting unsafe practices.

• Analyzing all facets of production and making recommendations for improvement.

Perks & Benefits

• Nearby public transport
• Central location
• Flexible working hours
• Free snacks / Happy hours
• Medical insurance
• Open culture

TECHNICAL SERVICE ENGINEER (COLOUR PIGMENT - PLASTIC INJECTION MOLDING)

Salary Range: RM6000 – RM7000

Full Time Position - BASED KULAI & BATAM

Suitable for Male Worker

Training Provided

Job Responsibilities:

1. Sets up, operates, and maintains injection moulding machines to produce Colour Chips and performs technical control.
2. Customer/Supplier onsite visit for technical support on products and Colour deviation as well as solving abnormal problems.
3. Provide technical support for injection moulding machine setup, maintenance, production parameters, and troubleshooting at customer onsite.
4. Responsible to follow up on customer’s trial sample production and onsite production status.
5. Develop and enhance the support plan in order to establish good customer relationships and customer satisfaction.
6. Knowledge transfer to customers or sales channel partners on system setup, maintenance, and troubleshooting skills.
7. Work closely with the Quality Team on quality and design related improvements based on customer feedback.
8. Adhere to production operating parameters and Good Manufacturing Practices to meet production and quality targets.
9. Accuracy in measurement and strong interest in Colour matching.
10. To perform tasks/jobs as assigned by superior.
11. Training Provided.

Requirements:

1. Must possess at least a Diploma in Mechanical Engineering or relevant technical/industrial academic qualifications.
2. Secondary School graduates are welcome to apply if having relevant working experience.
3. At least 2 years and above working experience in Plastic Injection Molding / Extrusion / Plastic Resin / Colorants Manufacturing.
4. Able to speak and write Mandarin.
5. Basic communication skills in Mandarin, Bahasa Malaysia, and English.
6. Basic computer literate.
7. Willing to go onsite for customer and supplier visits for technical support.
8. Willing to work outstation in Batam.
9. Self-initiated with good 5S habits and discipline.
10. **A Mandarin speaker is preferable (as we need to deal with China/Hong Kong HQ).

Benefits:

• EPF, SOCSO, EIS Contributions
• Medical Leave & Annual leave
• Yearly AWS
• Relevant Training Courses
• Allowances
• Performance Bonus

Responsibilities:

• Manage and oversee project sites to ensure smooth project execution.
• Monitor project progress and prepare reports for management and clients.
• Coordinate with clients, consultants, subcontractors, and internal teams.
• Provide technical support, troubleshooting, and commissioning activities.
• Prepare project documentation and attend site meetings when required.
• Assist in tender preparation, technical proposals, and solution design.
• Support installation, testing, maintenance, and post-sales activities.
• Monitor material usage and coordinate equipment installation activities.

Requirements:

• Degree in Electrical Engineering, Electronics Engineering or related field.
• Minimum 1–3 years of experience in project management or ELV systems (fresh graduates are encouraged to apply if applicable).
• Knowledge in ELV systems such as CCTV, Access Control, PA System, Structured Cabling, Alarm System, etc.
• Strong project coordination and communication skills.
• Able to read and interpret technical drawings and specifications.
• Good troubleshooting and problem-solving skills.
• Proficient in Microsoft Office and AutoCAD (preferred).
• Willing to travel and work at project sites when required.

Perks & Benefits

• Bonus
• Company trips
• EPF, Socso & EIS
• Annual Leave
• Personal development opportunities
• Medical Claim
• Allowances

Job Responsibilities:

• Source, evaluate, and negotiate with suppliers/subcontractors for construction materials, equipment, machinery, and services at competitive prices.
• To ensure the materials are high-quality, cost-effective, and delivered to job sites on time to keep projects running on schedule and within budget.
• Negotiate pricing, delivery schedules, and payment terms. Prepare and issue Purchase Orders (POs) based on approved material requisitions and project budgets.
• Monitor open POs to ensure timely delivery to job sites, mitigating project delays.
• Inspect received materials and ensure they meet building codes, project specifications, and quality standards.
• Coordinate with project team, and quantity surveyors to ensure material specifications, quality, and timelines are met.
• Work closely with Quantity Surveyor (QS) to verify material quantities against BOQ and project requirements before purchasing.
• Liaise with finance department to verify invoices, delivery orders, and payment terms.
• Ensure all procurement activities comply with company policies, contractual requirements, and ISO/SOP standards.
• Assist in value engineering efforts by recommending cost-saving alternatives without compromising quality.
• Prepare procurement reports, cost comparisons, and purchase records for management review.
• Perform any other duties as assigned by superior from time to time.

Job Qualifications:

• Minimum Diploma/Degree in Supply Chain Management, Business Administration, Quantity Surveying, or related field.
• At least 3 to 5 years’ experience, preferably in construction or related industry.
• Good knowledge of construction materials, machinery, equipment, and suppliers.
• Strong negotiation and communication skills.
• Proficient in MS Office (Word, Excel) and purchasing systems.
• Good organizational skills with attention to detail.
• Ability to work under pressure and meet tight deadlines.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Company trips
• Personal leave
• Personal development opportunities

Tanggungjawab Kerja:

• Mencari, menilai dan berunding dengan pembekal/subkontraktor untuk bahan binaan, peralatan, mesin dan perkhidmatan pada harga yang kompetitif.
• Untuk memastikan bahan-bahan berkualiti tinggi, kos efektif dan dihantar ke tapak kerja tepat pada masanya bagi memastikan projek berjalan mengikut jadual dan dalam bajet.
• Rundingkan harga, jadual penghantaran dan terma pembayaran. Sediakan dan keluarkan Pesanan Pembelian (PO) berdasarkan permintaan bahan dan bajet projek yang diluluskan.
• Pantau PO terbuka untuk memastikan penghantaran tepat pada masanya ke tapak kerja, sekali gus mengurangkan kelewatan projek.
• Periksa bahan yang diterima dan pastikan ia memenuhi kod bangunan, spesifikasi projek dan piawaian kualiti.
• Menyelaras dengan pasukan projek dan juruukur kuantiti untuk memastikan spesifikasi bahan, kualiti dan garis masa dipenuhi.
• Bekerjasama rapat dengan Juruukur Bahan (QS) untuk mengesahkan kuantiti bahan terhadap BOQ dan keperluan projek sebelum membeli.
• Berhubung dengan jabatan kewangan untuk mengesahkan invois, pesanan penghantaran dan terma pembayaran.
• Memastikan semua aktiviti perolehan mematuhi dasar syarikat, keperluan kontrak dan piawaian ISO/SOP.
• Membantu dalam usaha kejuruteraan nilai dengan mengesyorkan alternatif penjimatan kos tanpa menjejaskan kualiti.
• Menyediakan laporan perolehan, perbandingan kos dan rekod pembelian untuk semakan pihak pengurusan.
• Melaksanakan sebarang tugas lain yang diarahkan oleh pihak atasan dari semasa ke semasa.

Kelayakan Pekerjaan:

• Minimum Diploma/Ijazah dalam Pengurusan Rantaian Bekalan, Pentadbiran Perniagaan, Ukur Bahan atau bidang berkaitan.
• Sekurang-kurangnya 3 hingga 5 tahun pengalaman, sebaik-baiknya dalam pembinaan atau industri berkaitan.
• Pengetahuan yang baik tentang bahan binaan, jentera, peralatan dan pembekal.
• Kemahiran rundingan dan komunikasi yang kuat.
• Mahir dalam MS Office (Word, Excel) dan sistem pembelian.
• Kemahiran organisasi yang baik dengan perhatian terhadap perincian.
• Kebolehan bekerja di bawah tekanan dan memenuhi tarikh akhir yang ketat.

Faedah & Kebaikan

• Ekuiti pekerja
• Komisen dan bonus
• Elaun (upah perjalanan, pengangkutan, dll.)
• Kod pakaian kasual
• Snek percuma / Waktu gembira
• Aktiviti pasukan tetap
• Perjalanan syarikat
• Cuti peribadi
• Peluang pembangunan peribadi

工作職責：

• 尋找、評估並與供應商/分包商談判，以具有競爭力的價格採購建築材料、設備、機械和服務。
• 確保材料品質高、價格合理，並按時送達施工現場，以確保工程按計劃和預算進行。
• 協商價格、交貨時間表和付款條件。根據已批准的物料申請和項目預算，編制並簽發採購訂單（PO）。
• 監控未完成的採購訂單，確保及時將貨物運送到施工現場，減少工程延誤。
• 檢查收到的材料，確保其符合建築規範、項目規格和品質標準。
• 與專案團隊和工程造價師協調，確保材料規格、品質和時間進度符合要求。
• 在採購前，與工料測量師 (QS) 密切合作，以核實材料數量是否符合工程量清單 (BOQ) 和專案要求。
• 與財務部門聯絡，核實發票、送貨單和付款條款。
• 確保所有採購活動均符合公司政策、合約要求和 ISO/SOP 標準。
• 協助價值工程工作，推薦既能節省成本又不影響品質的替代方案。
• 準備採購報告、成本比較表和採購記錄，供管理階層審核。
• 執行上級不時指派的其他任務。

職位要求：

• 至少擁有供應鏈管理、工商管理、工程造價或相關領域的文憑/學位。
• 至少 3 至 5 年工作經驗，最好是在建築或相關行業。
• 對建築材料、機械、設備和供應商有良好的了解。
• 較強的談判和溝通能力。
• 熟練使用微軟辦公室軟體（Word、Excel）和採購系統。
• 具備良好的組織能力和注重細節。
• 能夠在壓力下工作並按時完成任務。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 休閒著裝要求
• 免費小吃/歡樂時光
• 定期團隊活動
• 公司旅行
• 個人休假
• 個人發展機會