Total 24 Maintenance / Repair job vacancies in Penang

Job Description

• Responsible for operation and monitoring of low voltage (LV) electrical system (MDB / SMDB / DB) for solar PV projects and site facilities
• Ensure stable, safe, and continuous power supply for solar installation sites and operations
• Carry out preventive maintenance (PPM) for electrical systems, solar PV components, and related equipment
• Troubleshoot electrical faults including tripping, short circuit, overload, and system failure
• Perform emergency repair to restore power and minimize downtime
• Operate and maintain backup systems such as generator, UPS, and ATS
• Ensure all electrical and solar installation works comply with safety standards and regulations
• Maintain maintenance records, site log books, and inspection reports
• Coordinate with technicians and project teams for maintenance and site support activities

Qualification / Experience & Requirements

• Must possess valid Chargeman A4 Certificate
• Experience in solar PV system, electrical maintenance, or facility management is preferred
• Good knowledge of LV electrical systems, switchgear, inverter systems, and backup systems (generator / UPS / ATS)
• Able to troubleshoot electrical and system faults independently
• Strong understanding of electrical safety and site safety procedures
• Willing to work shifts or on-call when required
• Responsible, disciplined, and good teamwork attitude
• Able to work independently in a fast-paced project/site environment

Perks & Benefits

• Personal leave
• EPF & SOCSO
• Personal development opportunities

Requirements:

• Degree in Mechanical / Electrical and Control Engineering or equivalent
• At least 3 years of working experience in related facility management and system
• Good technical knowledge in electrical, mechanical, HVAC, air compressor, building maintenance system etc.
• Good management and planning skills
• Good analytical, communication and interpersonal skills
• Candidates proficient in computer applications, AutoCAD & software (Microsoft Word, PowerPoint, and Excel).
• Experienced in equipment and process validation: DQ, IQ, OQ and PQ
• 1 Full-Time position available.
• To be based in Bukit Mertajam, Pulau Pinang.

Responsibilities:

• Develop routine annual and monthly maintenance plans
• Ensure that no interruption to all utilities at all time through good maintenance program
• Provide design proposals, perform engineering calculations, planning, install, and/or maintain mechanical & electrical, or other facilities infrastructure systems
• Schedule and perform routine checks on infrastructure e.g. electrical, mechanical, fire system etc.
• Plan, direct and coordinate activities related to design, construction, modification and maintenance of equipment and machinery within the facility
• Conduct daily routine inspection
• Maintain and improve quality and reliability of water system, Air Compressors, HVAC, CDA and Chiller
• Lead root cause analysis and implement long-term solutions
• Quickly respond to equipment breakdowns and emergencies to restore production operations
• Capable of troubleshooting and preparing reports on issues and incidents
• Prepare all required specification, standard operating procedures (SOPs) and working instruction and ensure all documentations are properly updated and maintained
• Develop and review operational procedures and provide training before hand-over to operation
• Identify and recommend opportunities related to energy conservation and take necessary action for cost reduction
• Improve and standardize equipment, simplify operations, enhance productivity, and develop new production technologies
• Enforce safety rules and regulations across the departments to achieve zero accident

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Paid training and development

我們歡迎任何與CNC工具機製造相關的職位申請。

職責：

• 根據提供的圖紙，設定獨立機器並進行偏移調整。

• 要求：不一定要持有文憑/學士學位等證書或經驗，但如有則優先考慮。
• 相關工作經驗者優先考慮。
• 語言能力強，英語和馬來語書面及口語表達能力俱佳。
• 了解遊標卡尺、千分尺和千分錶等基本測量工具。
• 積極主動、樂於學習、勤奮努力、以結果為導向，並具備團隊合作精神。
• 良好的溝通和人際交往能力。
• 能夠獨立工作。
• 我們將提供培訓。
• 如果您能夠獨立進行程式設計和設置，我們可以進一步討論薪資待遇。
• 歡迎應屆畢業生申請。

福利待遇

• 津貼（旅費、交通費等）
• 出席福利
• 個人休假
• 小組診所
• 僱員公積金及社險
• 個人發展機會
• 遠距辦公的彈性

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Pentrac Itron is seeking a conscientious Electronic & Electrical Technician that will be in charge of performing standard calibration processes on a variety of specialized equipment and responsible for recording and analyzing the results. 

The main role of the Electronic & Electrical Technician is to troubleshoot, problem solve and provide technical information to allow informed decision-making. The role will involve assisting technical teams with recommendations to resolve laboratory problems, roadblocks or equipment malfunctions that impact the performance or validity of testing. 

Job Duties:

• Calibration of equipment, including troubleshooting, problem isolation & provide technical information for customer to make decision wisely.
• Maintenance of the various calibration equipment and platforms.
• Manage record retention for all Calibration Lab operations as needed.
• Identify non-conforming works related to calibration and report to Manager.
• Cal factors data entry.
• Compile reports for customer notification or problem resolution.
• Perform safety tests on equipment.

Perks & Benefits

• 13th Month Bonus
• Allowance (transportation, meal etc.)
• Central location
• Casual dress code
• Medical insurance
• Personal leave
• Performance Incentive

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

About WorldFish  

WorldFish is an international research organization working to transform aquatic food systems to reduce hunger, malnutrition, and poverty. It collaborates with international, regional, and national partners to co-develop and deliver scientific innovations, evidence for policy and knowledge to enable equitable and inclusive impact for millions who depend on fish and other aquatic foods for their livelihoods and nutrition. Our work in countries advances progress on multiple 2030 Sustainable Development Goals through science and innovation, with a vision of healthy people, healthy planet and shared prosperity.   

About the Position 

WorldFish is seeking to engage an Intern (Facilities Management) who will support the Facilities team in day-to-day facilities operations, including preventive maintenance coordination, vendor supervision, and record keeping ensuring a safe, functional, and well-maintained workplace.

At the same time, this internship is designed to provide structured learning and practical exposure to facilities management practices, enabling the intern to develop technical, analytical, and coordination skills within a professional environment.

Key Responsibilities

• Assist in maintaining and updating the asset register, including tagging, classification, and documentation, while gaining understanding of asset lifecycle management.
• Support the collection and recording of utility consumption data (e.g., electricity, water) and assist in preparing basic monthly summaries to understand usage trends.
• Assist in logging, tracking, and closing work orders, gaining exposure to facilities workflows, response timelines, and service coordination.
• Support coordination of vendors and contractors, including scheduling, site access, and monitoring work progress, while learning basic contract and service management practices.
• Assist with minor maintenance tasks under supervision, focusing on understanding safety procedures, tools, and standard maintenance practices.
• Support workspace setup, furniture coordination, and updating layout records to understand space utilization and planning.
• Assist in routine safety checks and reporting, developing awareness of workplace safety standards and compliance requirements.

This job might be for you if you have the below skills and qualifications:  

• The candidate will either have obtained or currently be working towards obtaining a bachelor’s degree in Facilities Management, Building Services / Building Technology, Mechanical Engineering, Electrical Engineering, Civil Engineering, Property / Estate Management or other related disciplines.
• Candidates pursuing relevant coursework or certifications may also be considered.
• Basic understanding of Facilities Management, Building Services, or Engineering principles.
• Foundational knowledge in Electrical, Mechanical, or Building Maintenance concepts.
• Strong interest in operations, maintenance systems, and workplace safety practices.
• Ability to learn hands-on technical tasks under supervision.
• Effective communication and teamwork skills to coordinate with internal teams and vendors.
• Willingness to develop practical skills in a structured facilities environment.
• Good organizational and record-keeping skills with attention to detail.
• Basic proficiency in Microsoft Office applications (Excel, Word, PowerPoint) for documentation and reporting.

• This internship provides a valuable opportunity to gain practical experience in an international research environment.
• The intern will benefit from close interaction with scientists and technical staff, building both technical and professional skills.
• A monthly stipend will be provided.

Location and Duration

The successful interns will be based at WorldFish Headquarters in Penang, Malaysia. The internship will run for a duration of up to 5½ months. This opportunity is open exclusively to Malaysian applicants. Interviews are expected to take place as soon as possible and only shortlisted candidates will be notified and invited to attend.

How to Apply

Your application must include:

• A copy of your curriculum vitae,
• A cover letter which addresses the key requirements stated above; and
• Contact information of three professional referees who may be contacted if you are short-listed for the position.

To be considered, applications must be submitted by no later than 23:59 (MYT), 17 May 2026. 

The screening will start immediately and will continue until the position is filled. Due to the high volume of applicants for WorldFish positions, we appreciate all interest, but only short-listed candidates will be contacted. 

Our Gender, Diversity and Inclusion Commitment 

Over 40% of WorldFish staff is women with some 30 nationalities represented and contributing to its dynamic multicultural work environment. WorldFish is committed to promoting a work environment where diversity and inclusion are valued and we seek to have gender balance in the organization. We aim to also seek balance across other diversity dimensions. 

People in WorldFish are treated equally irrespective of gender, ethnicity/race, national or social origin, disability, religion, political affiliation, age, family size, marital status or any other form of personal identity.

We are an equal opportunities employer and strongly encourage qualified women and men from developing nations to apply. 

Job Description

1. Job Summary

1.1 Responsible to ensure all equipment used in test center in good working condition.

1.2 Responsible to arrange daily planned job to test worker.

1.3 Responsible to brief test worker on any newly introduced test item or test method.

1.4 Responsible to prepare Test Material, Test Data Recording Sheet for each test.

1.5 Responsible to ensure test material fulfill test plan specification and control the usage.

1.6 Responsible to perform audit at test center and feedback any finding to superior promptly.

1.7 Responsible to perform product function check, internal inspection after test.

1.8 To perform failure analysis.

1.9 To generate and publish test report after completion of the test.

1.10 Specific task assigned by the superior, as and when necessary, to meet target or deadline.

2. Core Competencies

2.1 Able to use basic measuring equipment such as caliper, multimeter & etc.

2.2 Proficiency in spoken and written English and Bahasa Malaysia.

2.3 Basic computer literacy (e.g. Microsoft Excel and Word)

2.4 Good communication skills

3. Work Conditions

3.1 Able to work on shift

3.2 High inter and intra departmental interaction

3.3 Able to work under tight schedule

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

• ESSENTIAL DUTIES AND RESPONSIBILITIES:

  · Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

  · Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

  · Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

  · Perform product conversions on test equipment to support various production requirements.

  · Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

  · Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

  · Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

  · Perform equipment checklists in accordance with standard operating procedures.

  · Assist engineers with daily tasks and contribute to special projects as required.

  · Ensure compliance with ISO standards and documentation practices.

  · Adhere strictly to all safety rules and cleanroom protocols.