Total 44 Junior Executive technician job vacancies in Singapore

About Us 

We specialise in designing and manufacturing high-grade electronics and electro-mechanical solutions for disruptive Industrial, Medical, and Transportation OEMs. With a commitment to innovation and quality, we strive to deliver exceptional products that meet the highest standards. Our team is dedicated to pushing the boundaries of technology and providing our clients with cutting-edge solutions that drive their success. Join us and be a part of a dynamic company that values creativity, collaboration, and excellence.

The Role

The Process Technician supports Product and Process Engineers in daily production floor activities, including MES implementation, new line setup, equipment setup and maintenance, and process evaluations. The role involves preparing work instructions, verifying process standard times, supporting jig and fixture setup, and participating in continuous improvement initiatives to enhance productivity, quality, and cost efficiency.

Key Responsibilities

• Assist Product / Process Engineer for the following tasks:• Support daily engineering related activities in production floor.• MES implementation, execution and support.• New line setup. He / She must make sure the process flow chart, work instruction, process standard time, jigs and fixture and machine are readily prepared. • Perform setup / maintenance for the engineering equipment.• Perform engineering evaluation and report.• Equipment, Jig and Fixture Buyoff• Process Standard Time verification• Participate in Kaizen activities to achieve process improvement, cost reduction and yield improvement.• Perform any other duties assigned by engineers.

Skills & Experience

• At least 3 years working experience in an electrical / electronic related manufacturing.
• Experience in motion time study technique, work instruction preparation, jig and fixture setup and etc.
• Experience in Lean Manufacturing principles and practices.
• Having computer literate knowledge, especially Microsoft office application.
• Able to work independently, self-motivated, commitment, result oriented and a good team player. 
• Able to work shift

Qualifications 

•  Diploma / Certificate in Industrial/ Electronics/ Electrical/ Mechanical Engineering or equivalent.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Medical insurance
• Personal leave

Responsibilities:

• Performs set-up/changeovers, takes corrective action to eliminate production defects and reduce in-process losses with minimal support from superior.
• Performs machine preventive maintenance and prepares machines for line clearances.
• Troubleshoot equipment and coordinate corrective actions to reduce or eliminate defects, rejects, or equipment downtime with minimal support from Superior.
• Perform all assigned duties according to departmental SOP’s.
• Remain current on proper procedures by reviewing current, revised, and new SOP’s relating to the job and to the department.
• Ability to use, clean, and store tools and other devices required for the performance of the job in a manner which prevents damage to the tools and / or equipment.
• Maintain a clean and organized work area during and at the end of each shift.
• Effective and efficient operation of manual and automated equipment.
• Follow the related legal requirement in working environment practice such as ISO requirement, Safety requirement etc. based on the Superior decision.
• Responsible to Control related Confidential item and make sure the material is not leak to other parties and follow the implementation of the preventive action.
• Attend the informal or formal inhouse or external training as to increase the awareness of the necessary training scope which relevant to the work base on Superior plan.

Competencies:

• Able to use precision measurement device and accurately measure within 0.5μm.
• Ability to multi-task and have the Hands-On skill.
• Excellent hand-eye coordination and manual dexterity and able to read technical drawing.
• Ability to work any shift (up to 12-hours) as required dependent on business needs.
• Physically able to continuously stand and walk.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities
• Yearly performance based increament.

Requirement

Minimum 1 years working experience in food & beverage / baking / machine maintenance.

Can communicate in English, Bahasa Malaysia and Mandarin. 

With sense of responsibility and manageable with assigned work.

Self motivated

Willing to travel

With own transport and willing to travel outstation possess.

Responsibilities

To maintain and ensure that all production equipment and utilities are in good working condition

To attend to machinery breakdown at the shortest possible time.

Responsible to ensure all tools and equipment are good condition.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Personal leave
• Paid training and development

Working Location:

(JB) No. 8, Jalan Firma 2/1, Kawasan Perindustrian Tebrau 1, 81100 Johor Bahru, Johor

(GP) Taman Laman Setia, 12, Jalan Laman Setia 7/3, Setia Business Park, 81550 Johor Bahru, Johor

About Us 

We specialize in designing and manufacturing high-grade electronics and electro-mechanical solutions for disruptive Industrial, Medical, and Transportation OEMs. With a commitment to innovation and quality, we strive to deliver exceptional products that meet the highest standards. Our team is dedicated to pushing the boundaries of technology and providing our clients with cutting-edge solutions that drive their success. Join us and be a part of a dynamic company that values creativity, collaboration, and excellence.

The Role 

The Molding Mold Setter/Injection Molding Technician is responsible for executing the Equipment Quality Maintenance (EQM) plan, ensuring all molding tools, fixtures, equipment, and machines are properly set up, maintained, and operating at optimal efficiency. This role plays a key part in supporting smooth molding production, minimizing downtime, and ensuring high-quality workmanship.

The ideal candidate will have hands-on experience in injection molding setup, machine maintenance, and troubleshooting, with a proactive attitude toward process improvement and safety.

Key Responsibilities

• Execute EQM activities for all molding tools, fixtures, machines, and equipment.
• Plan and organize mold setup and production activities to ensure quality and efficiency.
• Ensure all molding machines and equipment are maintained at peak performance and availability.
• Attend to equipment or mold breakdowns and carry out professional repair work promptly.
• Liaise with the Production Supervisor to coordinate maintenance and minimize downtime.
• Report equipment breakdowns and spare part requirements daily to the superior.
• Propose and verify improvement plans for production tools, fixtures, and machines.
• Maintain and adjust machine parameters to ensure product quality and process stability.
• Perform layout and setup activities for new or modified molds.
• Provide backup support to other technicians when manpower is limited.
• Discuss and share improvement ideas with the superior to enhance production efficiency.
• Train operators on the proper handling and safe operation of machines and tools.
• Ensure safe working methods are practiced at all times and correct unsafe behavior immediately.
• Perform any other duties as assigned by the Head of Department or superior.

Skills & Experience

• Minimum 1 year of experience in injection molding setup or mold maintenance.
• Knowledge of molding machine operation, parameter setting, and troubleshooting.
• Able to read and understand technical and mechanical drawings.
• Familiar with electronics or plastic injection molding processes.
• Capable of using Microsoft Office (Word, Excel, PowerPoint, Outlook) – an added advantage.
• Strong teamwork, problem-solving, and communication skills.
• Able to work independently and handle multiple tasks efficiently.

Qualifications 

• Diploma or Certificate in Electrical / Electronics / Mechatronics / Mechanical Engineering or related field.
• Safety-conscious and disciplined with a hands-on technical background.
• Willing to work shifts and overtime when required.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Central location
• Medical insurance
• Personal leave

職責：

• 執行設定/換型工作，採取糾正措施消除生產缺陷並減少過程中的損失，上級支援極少。
• 執行機器預防性維護，並為生產線清場做好準備。
• 在Superior提供的最小支援下，對設備進行故障排除並協調糾正措施，以減少或消除缺陷、不合格品或設備停機時間。
• 依照部門標準作業規程履行所有指派的職責。
• 透過查閱與工作和部門相關的現行、修訂和新的標準作業規程 (SOP)，隨時了解正確的操作流程。
• 能夠以不損壞工具和/或設備的方式使用、清潔和存放工作所需的工具和其他設備。
• 在每個班次期間和結束時，保持工作區域清潔有序。
• 有效率、有效地操作手動和自動化設備。
• 根據上級指示，遵守工作環境實務中的相關法律要求，例如 ISO 要求、安全要求等。
• 負責管控相關機密事項，確保資料不洩漏給其他方，並跟進預防措施的實施。
• 根據上級計劃，參加非正式或正式的內部或外部培訓，以提高對與工作相關的必要培訓範圍的認識。

能力：

• 能夠使用精密測量設備，測量精度可達0.5μm。
• 具備多工能力和動手能力。
• 手眼協調能力強，手部靈巧，能讀懂技術圖。
• 根據業務需要，能夠勝任任何班次（最長 12 小時）。
• 身體能夠持續站立和行走。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 個人休假
• 個人發展機會
• 根據年度績效進行加薪。

工作範圍：

• 對冷水機組運作進行例行檢查，包括冷凍水和冷卻水溫度，並檢查所有公用設施管線（水、壓縮空氣和天然氣）是否有洩漏。任何缺陷或問題必須立即報告給主管/部門負責人。
• 檢查並記錄壓縮機運轉參數，包括壓力、溫度、馬達電流（安培）、滑閥位置、馬達轉速、油位和運轉時間。
• 城鎮水樣本進行水質分析，包括城鎮水、飲用水、穀物用水和DPRS用水。
• 每日記錄水錶讀數。
• 如果發生跳脫或斷電事故，請前往故障工廠進行搶修。
• Handel氨冷水機故障排除隔離閥檢查洩漏區域並修復洩漏區域。
• 測量並記錄冷卻水塔（SA、RM、Nescafe 和冷凍水系統）的水電導率、pH 值和 ORP 值，並檢查和清潔水過濾器。
• 在操作冷水機組、冷卻水塔、壓縮機、氨氣或其他需要穿戴個人防護裝備的工作時，請遵守安全規程並穿戴適當的個人防護裝備。
• 如有任何事故或安全事件，請立即向主管/部門主管報告。

福利待遇

• 醫療保險
• 輪班津貼
• 隨著時間的推移

Job Scope :

• Conduct routine checks on chiller operations, including chilled and cooling water temperatures, and inspect all service line utilities (water, compressed air, and natural gas) for leakage. Any defects or problem must be reported immediately to the Supervisor / HOD.
• Check and record compressor operating parameters, including pressure, temperature, motor current (ampere), slide valve position, motor speed, oil level, and running hours.
• Carry out water analysis for town water samples, including town water, drinking water, cereal water, and DPRS water.
• Record water meter readings daily.
• Attend breakdown plant in case trip or power down.
• Handel ammonia chiller troubleshooting isolation valve check area leaking & fix leaking area.
• Measure and record water conductivity, pH, and ORP for cooling towers (SA, RM, Nescafe, and chilled water systems), and inspect and clean water filters.
• Follow safety procedures and wear appropriate PPE when working with chillers, cooling towers, compressors, and ammonia or other work that requires PPE.
• Report any accidents or safety incidents immediately to the Supervisor / HOD.

Perks & Benefits

• Medical insurance
• Shift Allowance
• Overtime

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

Job responsibilities:

• Handling walk-in customer and sales team in related to service related process.
• Attend ad-hoc service case (Klang Valley) whenever is needed from time to time basis.
• Assist service supervisor on related task with service operation process.
• Stock keeper & inventory monitoring for spare part.
• Perform any other ad-hoc duties as assigned by management.

Job specifications:

• Min. SPM qualification.
• Able to converse & read English & Malay language.
• Microsoft words & Excel. (For data entry only).
• Experience in inventory management.
• Added advantage for technical knowledge with problem solving skills.

Perks & Benefits

• Medical include wellness
• EPF
• Sosco
• Year-end bonus

Scope : Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Job Description

• Responsible to assist Head of Department to ensure all repair and service
• jobs are completed in timely manner according to department standard of procedure.
• Site inspection, troubleshoot and provide resolution for customer pumps problem.
• Ensure all reports and records are updated after completion of work.
• Responsible for material planning for service department when necessary.
• Mechanical troubleshooting.
• Pump overhaul job.
• Carry out maintenance checklist, preventive and corrective maintenance.
• Fabrication job.
• To carry out any other duties & ad-hoc assignments as when needed.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Johor Bahru
• • Able to start work immediately will be an advantage.

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

工作職責：

• 負責接待到店顧客和銷售團隊，處理與服務相關的流程。
• 根據需要，隨時處理巴生谷地區的臨時服務案件。
• 協助服務主管完成與服務營運流程相關的任務。
• 備件庫存管理和監控。
• 執行管理層指派的其他臨時性任務。

職位要求：

• 最低學歷要求為SPM（馬來西亞教育文憑）。
• 能夠用英語和馬來語進行交流和閱讀。
• Microsoft Word 和 Excel。 （僅用於資料輸入）
• 具備庫存管理經驗。
• 具備技術知識和問題解決能力者優先考慮。

福利待遇

• 醫療包括健康
• 僱員公積金
• 索斯科

我們歡迎任何與CNC工具機製造相關的職位申請。

職責：

• 根據提供的圖紙，設定獨立機器並進行偏移調整。

• 要求：不一定要持有文憑/學士學位等證書或經驗，但如有則優先考慮。
• 相關工作經驗者優先考慮。
• 語言能力強，英語和馬來語書面及口語表達能力俱佳。
• 了解遊標卡尺、千分尺和千分錶等基本測量工具。
• 積極主動、樂於學習、勤奮努力、以結果為導向，並具備團隊合作精神。
• 良好的溝通和人際交往能力。
• 能夠獨立工作。
• 我們將提供培訓。
• 如果您能夠獨立進行程式設計和設置，我們可以進一步討論薪資待遇。
• 歡迎應屆畢業生申請。

福利待遇

• 津貼（旅費、交通費等）
• 出席福利
• 個人休假
• 小組診所
• 僱員公積金及社險
• 個人發展機會
• 遠距辦公的彈性

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131