Total 25 Fresh/Entry Level technician job vacancies in Singapore

• IETS experience
• Knowledge in 3 phase and single phase
• Min 1 year experience in manufacturing industry
• SPM & Diploma engineering Holder
• Willing to do shift

Perks & Benefits

• Company trips
• Personal development opportunities
• Woking day - 5 days
• Medical Leave
• Annual Leave
• Meal Allowance
• Shift Allowance

WE ARE HIRING: Engineer / Technician

Join COSMOWAVE – Malaysia’s Sole Distributor for Industrial Leak Testing Equipment.

We are looking for hands-on individuals ready to grow in a dynamic, field-based environment.

Key Responsibilities

。Installation, commissioning, and servicing of leak testing equipment

。Provide on-site troubleshooting and technical support

。Equipment calibration and performance verification

。Deliver after-sales technical assistance

。Prepare service and technical reports

Frequent Outstation Required

This role involves regular travel to customer sites. You will gain valuable hands-on industrial exposure and real-world technical experience.

If you prefer active, field-based work instead of being desk-bound, you will fit right in.

Requirements

。Hands-on technical skills and problem-solving mindset

。Willing to travel for outstation assignments

。Responsible, proactive, and eager to learn

。Relevant experience is an advantage (Fresh graduates are encouraged to apply)

。Ability to communicate in Mandarin is preferred (due to business communication needs)

Why Join COSMOWAVE?

。Competitive salary package

。Technical training and skill development

。Fast-track practical experience

。Exposure to advanced industrial testing technology

。Young and supportive working environment

。Clear career growth opportunities

At COSMOWAVE, you are not just taking a job — you are building real technical expertise for your future!

• IETS經驗
• 三相和單相知識
• 至少一年製造業經驗
• SPM及工程文憑持有者
• 願意輪班

福利待遇

• 公司旅行
• 個人發展機會
• 工作日 - 5 天
• 病假
• 年假
• 伙食補貼
• 輪班津貼

Responsibilities:

• Carry out electrical wiring works, including cable pulling, cable trunking, conduit installation, and termination.
• Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.).
• Connect wiring in electrical circuits and networks ensuring compatibility of components.
• Prepare and assemble conduits and connect wiring through them.
• Assist engineers in inspection, testing, troubleshooting, and rectification of electrical wiring systems and control panels.
• Read, understand, and follow electrical diagrams, wiring schematics, and control drawings.
• Support site installation, testing, commissioning, and maintenance activities.
• Ensure all electrical works are carried out in compliance with project specifications, safety regulations, and workmanship standards.
• Participate in project work at factory, mill, plant, or customer site as assigned.
• Undertake ad-hoc duties and technical assignments as required by the company from time to time.
• Ensure tools and equipment are in good condition.

Requirements:

• Minimum 2 years of working experience in electrical wiring, panel wiring, site installation, or related industrial electrical works will be an added advantage.
• Able to read and understand electrical drawings, control diagrams, and wiring schematics.
• Responsible, disciplined, and able to work both independently and as part of a team.
• Good attitude, teamwork, and communication
• Familiar with industrial electrical systems and automation-related work will be an added advantage.
• Committed to safety, quality, and proper documentation.

Perks & Benefits:

• Company Uniform
• Safety Shoes / PPE
• Personal development opportunities
• Paid training and development
• EPF / SOCSO / EIS (subject to employment terms)
• Overtime claim where applicable
• Annual Leave
• Medical Leave

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

混凝土攪拌站技術員 – 工作範圍

• 對混凝土攪拌站機械設備進行日常檢查、維護及故障排除。
• 確保混凝土攪拌站始終平穩且有效率地運作。
• 維修和保養電氣、機械、液壓和氣動系統。
• 監控工廠運作情況，並識別任何運作問題或故障。
• 根據維護計劃進行預防性維護。
• 與工廠操作人員和生產團隊協調，最大限度地減少停機時間。
• 維護和排除控制面板、感測器、馬達和配料系統的故障。
• 確保稱重和配料設備的校準和準確性。
• 記錄維護活動、維修工作和備件使用情況。
• 確保工廠機械符合安全和操作標準。
• 協助新廠設備的安裝、測試和調試。
• 立即回應緊急故障和技術問題。
• 監控備件庫存，並在必要時報告短缺。
• 保持車間和廠房區域的整潔衛生。
• 遵守公司標準作業規程、安全規則和現場要求。

福利待遇

• 個人休假
• 有薪培訓和發展

混凝土攪拌站技術員 – 工作範圍

• 對混凝土攪拌站機械設備進行日常檢查、維護及故障排除。
• 確保混凝土攪拌站始終平穩且有效率地運作。
• 維修和保養電氣、機械、液壓和氣動系統。
• 監控工廠運作情況，並識別任何運作問題或故障。
• 根據維護計劃進行預防性維護。
• 與工廠操作人員和生產團隊協調，最大限度地減少停機時間。
• 維護和排除控制面板、感測器、馬達和配料系統的故障。
• 確保稱重和配料設備的校準和準確性。
• 記錄維護活動、維修工作和備件使用情況。
• 確保工廠機械符合安全和操作標準。
• 協助新廠設備的安裝、測試和調試。
• 立即回應緊急故障和技術問題。
• 監控備件庫存，並在必要時報告短缺。
• 保持車間和廠房區域的整潔衛生。
• 遵守公司標準作業規程、安全規則和現場要求。

福利待遇

• 個人休假
• 有薪培訓和發展

Job Description

Bertanggungjawab dalam pemasangan, penyelenggaraan, pemeriksaan dan pembaikan mesin ais serta peralatan F&B bagi memastikan semua peralatan (equipment) berfungsi dengan baik dan selamat digunakan oleh pelanggan.

Skop Kerja Utma

1.Pemasangan & Pentauliahan (Installation & Commissioning)

• Melakukan pemasangan unit baru mesin ais, mesin kopi komersial, dispenser minuman, mesin basuh pinggan mangkuk, dan peralatan F&B lain di lokasi pelanggan (cafe, restoran, hospital, hotel, dll.).
• Memastikan sambungan elektrik, bekalan air, dan sistem saliran dibuat dengan betul mengikut spesifikasi teknikal.

2.Penyelenggaraan Pencegahan (Preventive Maintenance - PM)

• Melaksanakan jadual servis berkala untuk memastikan mesin beroperasi pada tahap optimum dan mengelakkan kerosakan luar jangka.
• Menjalankan kerja-kerja pembersihan (descaling), sanitasi sistem air, dan pemeriksaan komponen kritikal (pemampat, motor, penderia)

3.Pembaikan & Penyelesaian Masalah (Corrective Maintenance & Troubleshooting)

• Mendiagnosis kerosakan mekanikal, elektrikal, dan sistem penyejukan (refrigeration) pada peralatan F&B.
• Menjalankan kerja-kerja pembaikan, penukaran alat ganti yang rosak, dan pengecasan gas bahan pendingin (gas charging).

4.Pelaporan & Dokumentasi

• Melengkapkan laporan servis (Service Report), borang pemasangan, dan jaminan dengan tepat selepas setiap tugasan.
• Melaporkan status kerosakan besar atau isu teknikal kepada Penyelia Teknikal.

5.Latihan Pelanggan

• Memberi latihan asas kepada staf pelanggan mengenai cara operasi betul dan penjagaan harian mesin.

Keperluan Kerja

• Minimum SPM / Sijil / Diploma dalam bidang Elektrik, Mekanikal, Penyejukan atau bidang berkaitan
• Mempunyai pengalaman membaiki dan menyelenggara mesin ice maker atau peralatan F&B adalah satu kelebihan
• Mempunyai pengetahuan asas pendawaian elektrik dan troubleshooting
• Boleh bekerja secara berdikari dan juga dalam kumpulan
• Mempunyai lesen memandu yang sah
• Bersedia untuk membuat kerja dan servis di lokasi pelanggan (outstation/onsite)
• Bertanggungjawab, berdisiplin dan boleh mengikut jadual kerja
• Graduan baru digalakkan memohon

Compensation & Benefits

• EPF, SOCSO & EIS (statutory contributions)
• Medical Leave (MC)
• Annual Leave
• 50% meal discount at Poseidon Cafe (Kelana Jaya only)
• Personal Accident Insurance
• Medical Claim

職責與責任

• 負責依計畫對生產機器和設備進行預防性維護工作。
• 依照計畫（每週、每月、每季等）進行配套設施的維護活動。
• 記錄並存檔所有相關的維護活動報告，例如標準作業規程 (SOP)、預防性維護 (PM)、校正報告等。
• 在適用情況下，協助生產部門進行機器操作。
• 執行上級指派的日常監測、檢查、維護和維修工作。
• 負責處理和啟動任何機械故障的故障排除和維修工作，如果在完成工作中遇到任何困難，立即向上級報告。
• 進行新機器設備的安裝。
• 監督和管理所有外部承包商的工作，確保其按時以高標準完成。
• 確保備件庫存充足。
• 根據上級和管理階層的指示，執行各項維護任務。

要求

• 應徵者必須至少持有機械或相關領域的證書/文憑。
• 至少1年工作經驗，最好有機械維護和設施管理或相關經驗。
• 有超過 1 個空缺

福利待遇

• 休閒著裝要求
• 醫療保險

We are seeking a detail-oriented, hands-on Dental Technician Trainee to join our laboratory team. In this entry-level role, you will learn the artistry and science behind fabricating dental prosthetics, including crowns, bridges, and orthodontic appliances.

You will work directly under the supervision of experienced Dental Technicians and Laboratory Managers, gaining practical, real-world experience while mastering the technical skills required for a successful career in dental technology. No prior experience is required—we provide full, step-by-step training.

Key Responsibilities

• Learn and Master Fabrication: Assist in and gradually take over the creation of dental models, custom trays, bite rims, and prosthetic frameworks.

• Plaster Room Operations: Mix, pour, and trim plaster and stone models from dental impressions provided by clinics.

• Digital & Traditional Articulation: Learn to articulate models correctly to simulate the patient's bite.

• Introduction to CAD/CAM: Assist with scanning models and utilizing digital dental software for 3D printing or milling prosthetics (where applicable).

• Finishing and Polishing: Learn the precise techniques for polishing, contouring, and finishing acrylic and metal dental appliances.

• Lab Maintenance: Maintain cleanliness and organization within the laboratory, ensuring tools and machinery are properly maintained.

• Quality Control: Follow strict prescription specifications from dentists and ensure all work meets infection control and quality standards.

Requirements & Qualifications

• Education: O' Levels and above

• Manual Dexterity: Exceptional hand-eye coordination and a steady hand for working with small, delicate components.

• Attention to Detail: Ability to spot minor imperfections and follow highly specific, customized prescriptions.

• Artistic Aptitude: A good eye for shape, color, symmetry, and form is highly beneficial.

• Tech-Savvy: Willingness to learn modern digital dentistry tools and software (CAD/CAM).

• Reliability & Attitude: Strong work ethic, patience, and a eagerness to accept constructive feedback during the learning process.
  

  Working hours
  Mon to Fri: 9-6pm
  Sat: 9-1pm
  

  Work Benefits
  -7days paid leave, thereafter additional of 1 day each year up to 14 days paid leave max

  -Year end Bonus (depending on performance)
  

  Location:
  Ubi, Nearest MRT - Taiseng MRT

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Position: Test Technician (12 months Contract, Renewable)

Venue: Customer Lab (West)

Working Hours: Office Working Hours

Summary:

Responsible for performing electrical troubleshooting to determine problems in non-functioning test equipment.

Job Responsibilities:

• Execute validation test plan on SSD devices on PC systems.
• Maintain documentation of test results to assist in debugging and modification of software.
• Analyze test results to ensure existing functionality, recommends and implement test coverage improvement actions.
• Perform Failure analysis and work with other function groups to resolve SSD system issues.
• Provide system or SSD analysis support for customer.
• Able to communicate well and work as a team.

Requirements:

• Diploma in Electrical engineering or equivalent related field or experience is preferred
• Experience working with PC/Notebooks/Workstation (PC Setup, PC troubleshooting)
• Working experience in either SSD or HDD industry would be an advantage
• Experience with NVMe storage interface protocols and Windows/Linux Operating Systems
• Knowledge of storage device drivers and/or PCIE chipset register configurations would be beneficial
• Experience using PCIe/NVMe bus analyzers and oscilloscopes would be beneficial
• Conduct inspections and troubleshooting at customer sites.

**Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Test Technician", thank you.

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Position: Quality Technician; 12 months Renewable Contract

Venue: Customer Lab (West)/ Bendemeer

Working Hours: Monday-Friday office hours

Summary:

Responsible for performing electrical troubleshooting to determine problems in non-functioning test equipment.

Job Responsibilities:

•Execute validation test plan on SSD devices on PC systems.

•Maintain documentation of test results to assist in debugging and modification of software.

•Analyze test results to ensure existing functionality, recommends and implement test coverage improvement actions.

•Perform Failure analysis and work with other function groups to resolve SSD system issues.

•Provide system or SSD analysis support for customer.

•Able to communicate well and work as a team.

Requirements:

•Diploma in Electrical engineering or equivalent related field or experience is preferred

•Experience working with PC/Notebooks/Workstation (PC Setup, PC troubleshooting)

•Working experience in either SSD or HDD industry would be an advantage

•Experience with NVMe storage interface protocols and Windows/Linux Operating Systems

•Knowledge of storage device drivers and/or PCIE chipset register configurations would be beneficial

•Experience using PCIe/NVMe bus analyzers and oscilloscopes would be beneficial

•Conduct inspections and troubleshooting at customer sites

•Fresh graduates with a diploma in Electronics or Computer-related disciplines are welcome to apply

**Interested candidates, kindly email updated resume to sandra@wanco-manpower.com with Subject of "Quality Technician", thank you.

RecruitFirst is hiring!
You will be outsourced/deployed to our client!

Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

. Able to carry heavy parts (Physically Fit)

. Any other duties and responsibilities assigned by the Company from time to time.

Work Day: 5 Days,

either Sunday to Thursday or Tuesday to Saturday

Working Time: 8.30am to 6pm