Total 2,168 process engineer job vacancies in Singapore

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in Chemical/ Environmental/ Mechanical Engineering
• Minimum 4 years of experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

About Micron 

Micron is a global leader in memory and storage solutions, enabling transformative technology that enriches life for all. With over 40 years of innovation, Micron plays a pivotal role in the data-driven economy, where memory and storage are strategic differentiators. We are committed to sustainability, employee well-being, and community support, and we foster a culture of inclusion, collaboration, and continuous improvement. 

Job Summary 

Main Responsibilities: 
 As a Process Integration Module Engineer in the Process Integration department, you will be responsible for coordinating improvements in Yield, Quality, and Output for the NAND Flash production line. Day-to-day responsibilities include but not limit to crafting and analyzing process experiments, teaming with YE and PQA to investigate yield and quality problems and working with production and process engineering teams to ensure the smooth operation of the fab. 

Responsibilities and Tasks 

• Collaborate with multi-functional teams from PIE, Process & Equipment Engineering, WLR, TD to improve product yields and reliability within your assigned process loop. 

• Communicate module related issues to the Fab engineering and leadership teams. 

• Design, execute, and analyze experiments to improve fab process, yield, and quality. 

• Collect and interpret complex data to optimize Fab processes and increase yields. 

• Engage and/or lead cross-area engineering teams to tackle process issues. 

• Work closely with global partners to stay ahead of on module related topics and process alignment projects. 

• Collaborate with other PI module owners and sister fabs to drive business process alignment 

• Partner with IE, Process and Equipment Engineering and Production to better forecast and balance yield, output and process issues 

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

Requirements:

• Bachelor’s or advanced degree in Engineering or Science is required

• Strong analytical, logical, and critical thinking skills 

• Effective communicator, able to collaborate across all levels 

• Growth mindset with a passion for continuous learning 

• Internship or experience in the semiconductor industry is a plus 

• Demonstrated leadership and a track record of impact are highly desirable 

• Interest in and knowledge of the semiconductor industry and Micron is preferred.

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Embody Micron’s core values: 

• People – Respect, develop, and empower others 

• Innovation – Drive continuous improvement and breakthrough thinking 

• Tenacity – Show grit and determination 

• Collaboration – Build trust and foster teamwork 

• Customer Focus – Deliver excellence and value 

What to Expect  

Micron is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other protected factor. 

About our group:

The Sputter Process Engineering team(RMO) is responsible for developing, optimizing, and sustaining thin‑film deposition processes for advanced PMR and HAMR media technologies.

Based in Singapore and part of a global engineering network, we drive process excellence, yield improvement, and high‑volume manufacturing readiness. We collaborate closely with suppliers, R&D, and cross‑functional teams to enable next‑generation media performance through materials and process innovation.

 About the role – you will:      

As a key technical contributor, you will lead material performance and process integration for sputtering targets in high‑volume manufacturing.

• Serve as the technical lead for sputtering target materials, focusing on magnetic, mechanical, and microstructural properties.
• Define and optimize target material specifications to meet process stability, film performance, and reliability requirements.
• Drive supplier qualification and improvement, with strong understanding of target manufacturing processes (e.g., casting, HIP, bonding).
• Lead investigation of material‑related excursions, establishing linkages between material properties and process performance.
• Integrate target behavior with sputter process conditions to improve yield, OEE, and process robustness.
• Apply material characterization and data analytics to correlate target attributes with film quality and product performance.
• Evaluate and qualify next‑generation target materials for PMR and HAMR applications.
• Establish standards, control strategies, and best practices for target management across operations.

About you: 

Innovative, inclusive, and integrity-driven.

• Able to work effectively in a fast-paced and dynamic environment with multiple priorities.
• Strong team player with a collaborative and resourceful approach to problem-solving.
• Detail-oriented, results-driven, and capable of working independently when required.
• Effective communicator with strong stakeholder management skills.
• Proactive and capable of leading initiatives across cross‑functional teams.

Your experience includes:

• Bachelor’s degree in Materials Science, Physics, Metallurgy, or a related discipline.
• Strong knowledge of materials properties, microstructure, and characterization techniques.
• Experience in supplier management, qualification, or technical issue resolution.
• Hands‑on experience in sputtering, vacuum deposition, or thin‑film processes.
• Proven ability in troubleshooting and driving process improvements in manufacturing environments.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Position Summary

The Active Alignment Process Engineer is responsible for developing and optimizing optical alignment processes used in transceiver manufacturing. This role focuses on optical coupling performance, automation, equipment optimization, process stability, and NPI support.

Qualifications

Education

• Bachelor's degree or above in Optical Engineering, Electronics Engineering, Mechanical Engineering, Photonics, Physics, Manufacturing Engineering, or a related field.

Experience

• 5+ years of hands-on experience in optical assembly, precision alignment, semiconductor packaging, or photonics manufacturing.
• Experience with optical transceiver manufacturing is highly desirable.

Technical Skills

• Strong understanding of Active Alignment principles and optical coupling mechanisms.
• Experience with active alignment systems and automation platforms.
• Familiarity with:
• XYZ positioning stages
• 6-axis alignment systems
• Vision systems
• Motion control systems
• Understanding of optical performance measurements such as:
• Coupling efficiency
• Insertion loss
• Optical power measurements
• Experience in process development, recipe optimization, and troubleshooting.
• Knowledge of photonic packaging and optical assembly processes is preferred.
• Familiarity with SPC, DOE, and process capability analysis.

Soft Skills

• Excellent analytical and problem-solving skills.
• Strong communication and collaboration abilities.
• Ability to work effectively with multidisciplinary engineering teams.

Key Responsibilities

• Develop, qualify, and optimize Active Alignment processes for optical transceiver products.
• Establish and maintain alignment recipes, process parameters, and operating procedures.
• Optimize optical coupling performance, process repeatability, and manufacturing throughput.
• Improve:
• Yield
• Alignment accuracy
• Equipment utilization
• Process stability
• Cycle time
• Investigate optical performance failures and manufacturing issues.
• Support NPI projects, engineering builds, and product transfer into mass production.
• Collaborate with Product, Optical Design, Process, Test, and Manufacturing Engineering teams.
• Conduct process characterization, capability studies, and DOE experiments.
• Develop and maintain Bonding Programs, alignment recipes, SOPs, and Work Instructions.
• Participate in equipment installation, qualification, and acceptance activities.
• Ensure manufacturing processes meet quality, reliability, and customer requirements.
• Drive continuous improvement initiatives to enhance operational efficiency and product performance.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job title: Sputter Process Engineer - CK Job ID:20227

Location : West (Tuas)

Basic up to $4,000 + AWS bonus + Variable Bonus

Job responsibilities:

Participate in Sputter process in production lines to achieve higher density capacity/parameter

in order to meet customers’ requirement. Fostering a culture of continuous learning and development

• Ensure the sputtering machine is tuned to achieve higher capacity .
• Adjust the sputtering parameter to maintain high-quality output and minimizing defects.
• After Machine PM & changed material,perform conditioning to achieve guzik and start Mass production ASAP.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials and reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional issues.
• Analyze data from the sputtering process to identify trends and areas for improvement.
• Base on data analysis ,make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results over time.
• Any other job assigned by superior.

Requirements:

-Diploma or Bachelor's degree in Material Science/Chemistry

- Experience in manufacturing process related role

-Understanding of Sputtering technology

-Good knowledge of Minitab

-Good knowledge of Microsoft Office

Interested applicants please send your resume to Calista@pasona.com.sg with email subject header "Job Application for Sputter Process Engineer - CK Job ID:20227".

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Koh Siew Xing

EA Registration No: R22104418

Pasona Singapore Pte. Ltd.

EA License No:90C4069

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Process Intelligence Engineer is responsible for designing, building, and maintaining Industrial & Systems Engineering data modeling and analytics solutions that support data‑driven decision‑making across logistics, supply chain, and manufacturing operations.

The role works closely with engineering and operations stakeholders to translate business questions into scalable reporting, analytical models, and actionable insights, supporting operational visibility, execution tracking, and continuous improvement across domain‑focused initiatives.

Key Responsibilities

Decision Intelligence & Analytics

• Work in cross‑functional teams to design and develop reporting solutions enabling data‑driven decisions for logistics, supply chain, and manufacturing teams.

• Partners with GIS, Engineering, and Operations teams to align process analytics initiatives with broader analytics and automation efforts.

• Develop and maintain dashboards, analytical data models, and KPI frameworks using Power BI, Tableau, or equivalent BI platforms.

• Build scalable ETL data pipelines for ingestion, cleansing, integration, and transformation of large datasets across SAP, Databricks, SQL data warehouses, and operational systems.

• Perform ad‑hoc statistical, diagnostic, and root‑cause analysis using SQL and Python to support business investigations.

• Interface with internal customers for requirements gathering; translate business problems into reporting specifications and analytical outputs.

• Create automated workflows to ensure timely refresh and reliability of datasets, dashboards, and scorecards.

• Generate reports, technical documentation, business presentations, and stakeholder communications for operations and leadership.

• Continuously evaluate visualization, and reporting technologies; recommend improvements for reporting efficiency, data quality, and automation.

• Provide guidance to team members on best data and process practices, visualization standards, metric definitions, and structured problem‑solving approaches.

• Enable descriptive to predictive modeling and predictive to prescriptive modeling using standard datasets to optimize warehousing.
  

Simulation & Decision Modeling Skills

• Applies statistical and scenario‑based simulation techniques to evaluate business outcomes, operational tradeoffs, and decision alternatives.

• Uses what‑if analysis, Monte Carlo simulation, sensitivity analysis, and probabilistic modeling to assess risk, variability, and performance impacts across key metrics.

• Supports capacity, demand, throughput, and service‑level analysis using historical data and modeled assumptions rather than detailed process‑engineering tools.

• Partners with engineering, operations, and analytics teams to frame simulation inputs, assumptions, and constraints aligned with real‑world execution.

• Communicates simulation results clearly through dashboards, visualizations, and narratives to support leadership decision‑making.

• Leverages Python, SQL, and analytical tooling to build lightweight, repeatable simulation models that integrate with BI datasets and reporting workflows.
  

Education & Experience

• Education: Bachelor’s degree required; Master’s preferred in Industrial & Systems Engineering, Computer Science, Business Analytics, Systems Engineering or a related field.

• Experience: 4–7 years of experience in process intelligence, analytics, dashboarding, or data‑engineering–adjacent environments.
  

Preferred Skills

• Strong proficiency in SQL and Python for analytics and problem‑solving.

• Expertise in Power BI, Tableau, or equivalent visualization tools.

• Experience with cloud and big‑data platforms (Azure, Databricks, Snowflake, AWS, GCP).

• Knowledge of ETL/ELT frameworks, data modeling techniques (star/snowflake schemas), and DAX or similar analytical expressions.

• Understanding Data automation, data refresh pipelines, and reporting governance.

• Strong communication, stakeholder management, and collaboration skills.

• Curious, analytical mindset with interest in operational analytics and continuous improvement.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070