Total 2,176 network engineer job vacancies in Singapore

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices

• Site inspection, planning and other site activities

• Ensure safety & compliance of work on site

• Monitor & coordinate project progress

• Control of materials

Requirements:

• Degree in Building / Civil Engineering or related discipline

• At least 3 years experience in relevant field

• Able to work in Jurong Island

• Good interpersonal and communication

• Mon to Sat (Ability to work beyond normal working hours)

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Responsibilities:

• Support Test operation and maintenance/Troubleshoot of all Testing equipment

• Responsible for test equipment maintenance, calibration, PM and improvement.

• Online production test failure and testing low yield analysis dispose and follow-up.

• Online test equipment & accessories maintain and abnormality disposition.

• Support Daily Conversion with excess minimum of Conversion Daily following the Spec of different Customer requirement

• Identify problems as well as areas for yield and quality improvements and develop methods to improve productivity and reduce manufacturing cost

Requirements:

• Degree in Mechanical/Electrical Engineering and equivalent qualification.

• Min. 1 years of related job experience

• Knowledge of wafer fab facility process control and field instrument experience.

• Equipped with skill of Linux/Unix program.

• Creative problem-solving and troubleshooting skills.

• Familiar with IT/network function and configuration.

• Excellent critical thinking skills and a high level of numeracy.

• Able to commit work rotating day and night shifts

• Strong team working skills, with an ability to motivate others and to lead or manage teams and projects.

• Able to work independently and able to handle stress effectively.

• Familiar with Tester/Prober system maintenance is a plus.

Ready to Precision-Engineer Your Future?

Whether you’re looking for your first role or your next career move, UMC is where your future can take shape.

 Step into your future with us. Apply Now.

About United Microelectronics Corporation

United Microelectronics Corporation (UMC) is a leading global semiconductor foundry with over 40 years of innovation powering technologies across AI, automotive, consumer electronics, connectivity, and IoT. As one of the industry’s most established players, we enable breakthrough technologies through precision-engineered semiconductor manufacturing for customers across every major sector of the electronics world.

Headquartered in Taiwan, UMC has been present in Singapore since 2004 and continues to invest in local talent, technology, and advanced manufacturing. Our recent Fab expansion reflects our long-term commitment to building Singapore as a key hub for semiconductor innovation, and to creating stable, meaningful careers through innovation, teamwork, and progress.

Join a team that invests in your future from day one. With best-in-class training, hands-on experience and access to cutting-edge tools, UMC equips you to lead tomorrow’s tech landscape, right down to the nanometre.

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of Implementing and maintaining the Quality Management System standards and Environment, Health and Safety SOPs and Manuals.
• Responsible in ensuring adherence to Compliance and Regulatory Oversight for Standard Operating Procedure, Quality and Safety Manuals, Maintenance Organisation Expositions.
• In charge of Certification Audits by Civil Aviation and liaising with assigned CAA Principal Maintenance Inspector for approvals, certifications and inspections.
• Responsible in conducting Internal Quality Audit, External vendor QMS audits as well as managing vendor qualification into the Approved Vendor List
• Take charge of assigned audit conducted by Customer.
• In-Charge of the Quality and Safety of assigned workshop
• Responsible for conducting investigations for incidents and accidents, warranty
• Responsible assisting the Manager in developing, reviewing, improving and implementing quality and safety management procedures
• Attend meetings and other duties as delegated by the Quality Manager

Requirements:

• Min Diploma in aerospace engineering/engineering
• Min 3 years of in QMS in Aerospace Industry.
• Qualified Auditor is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Key Responsibilities

• Design, develop, and implement automation and control systems for various applications.

• Troubleshoot and resolve issues related to automation, control, and data connectivity systems.

• Collaborate with cross-functional teams to identify automation opportunities and requirements.

• Develop and maintain documentation for automation, control, and data connectivity processes and systems.

• Ensure compliance with industry standards and best practices in automation, control, and Industry 4.0.

• Ensure the uptime and reliability of all equipment and systems.

• Deliver sustainable automation and control solutions that support long-term operational goals.

Functional Knowledge

• Deep understanding of robotics applications, including robotic system integration, collaborative robots (cobots), and AI in robotics.

• Proficiency in vision systems engineering, including machine vision, image processing algorithms, and integration with automated equipment.

• Experience with assembly automation, including robotic arms, automated guided vehicles (AGVs), and conveyor systems.

• Knowledge of packaging automation, including automated packaging machinery, case erectors, palletizers, and stretch wrap machines.

• Expertise in electrical automation, including the design and implementation of control systems, sensors, and actuators to monitor and regulate electrical processes

• Familiarity with electrical circuits, power systems, and control theory to create customized automation solutions

• Proficiency in programming languages such as Java, Python, Groovy, and JavaScript.

• Knowledge of network protocols and communication standards (e.g., TCP/IP, SNMP).

• Familiarity with cloud platforms and services (e.g., AWS, Azure, VMware).

• Understanding of software development life cycle (SDLC) and agile methodologies.

• Expertise in PLC programming and SCADA systems.

• Experience with PID tuning, HMI development, and industrial networking.

• Knowledge of AutoCAD Electrical and LabVIEW.

• Familiarity with data connectivity, including data integration, data warehousing, and data visualization.

• Understanding of Industry 4.0 technologies such as IoT, AI, machine learning, and cyber-physical systems.

Business Expertise

• Ability to align automation, control, and data connectivity strategies with business goals and objectives.

• Experience in analyzing business processes to identify automation and control opportunities.

• Understanding of industry-specific regulations and compliance requirements.

• Capability to assess the financial trade-offs when designing and selecting automation, control, and data connectivity projects.

Leadership

• Lead and mentor a team of junior automation, control, and data connectivity engineers.

• Provide technical guidance and support to team members.

• Drive continuous improvement initiatives within the automation, control, and data connectivity team.

• Communicate effectively with stakeholders at all levels of the organization.

Problem Solving

• Strong analytical and troubleshooting skills to diagnose and resolve automation, control, and data connectivity issues.

• Ability to develop innovative solutions to complex automation, control, and data connectivity challenges.

• Experience in conducting root cause analysis and implementing corrective actions.

• Proficiency in using diagnostic tools and techniques to identify system inefficiencies.

Impact

• Enhance operational efficiency and productivity through effective automation, control, and data connectivity solutions.

• Reduce manual intervention and human error in critical processes.

• Contribute to the overall success of the organization by driving automation, control, and data connectivity initiatives.

• Improve system reliability and performance through proactive monitoring and maintenance.

• Ensure the sustainability of automation and control solutions to support long-term operational goals.

Interpersonal Skills

• Excellent communication skills to interact with technical and non-technical stakeholders.

• Ability to work collaboratively in a team environment.

• Strong organizational and time management skills.

• Adaptability to changing project requirements and priorities.

Work Location

• Upper Changi

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Responsible for Azure Cloud (IaaS, PaaS and SaaS) and on premise infra operations covering virtual machines, backup and SAN storage.
• Perform day-to-day system or application job request and support.
• Support basic Microsoft SQL administration on ad-hoc basis.
• Responsible for provisioning, installation, configuration, troubleshooting and maintenance of virtual machines (Wintel and Linux) and applications.
• Manage and coordinate with third-party vendors to troubleshoot and resolve problems.
• Ensure availability and continuity of infrastructures services.
• Proactively monitor and maintain system standards.
• Plan and co-ordinate monthly or ad-hoc patching with various stakeholders.
• Involved in incident, problem, change and service request management.
• Stand-by support after office hours and during weekend/public holidays if necessary.
• Work on multiple projects to meet internal and external deadlines
• Create and maintain documentation for operational procedures and IT policies
• Create and maintain Ansible playbooks for infrastructure automation

Qualifications

Requirements:

• Diploma / Degree in Information Technology or equivalent with at least 5 years of experience in IT infrastructure support.
• Minimum 3 years' experience in managing and administration with Wintel and Linux servers.
• Working experience with Azure Cloud administration.
• Knowledge with basic Microsoft SQL administration.

Interested applicants, please Email, fabianling@recruitexpress.com.sg

Fabian Ling Tuong Liing

R25129353

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

Responsibilities

• Designing and programming software for automated manufacturing equipment.
• Involves PC-based programming, troubleshooting systems, and maintaining legacy code.
• Designing and writing software for automation control, motion controllers, and vision systems.
• Reviewing, debugging, and improving existing legacy code.
• Diagnosing and fixing software or system issues on deployed, installed equipment.
• Liaising with customers to gather requirements and create technical specifications.
• Writing user manuals and technical reports outlining software functionality.

Requirement

• Min Diploma in Electrical/Electronic engineering/Computer science or related discipline
• Min 2 years of working experience in automation industry
• Proficient in PC based programming (e.g. Visual C#)
• Familiar with PLC programming (e.g. Omron/Beckhoff)
• Familiar with various Motion Controllers/Actuators (e.g. IAI, AD Link)
• Familiar with vision systems (e.g. Cognex)

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Perform regular maintenance and troubleshooting of wafer fabrication diffusion equipment including implanters, vertical/horizontal furnaces, RTO/RTP platforms, Laser RTP systems, and EPI.
2. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
3. Maintain Equipment capability for production and meet production demand
4. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
5. Engage in Equipment troubleshooting and production quality improvement.
6. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality.
7. On-call support if emergency situation
8. Schedule shift on-duty

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Desciption:

• Work closely with the Project Manager/ Project Director to plan, monitor, and report on project controls and progress measurement expenditures
• Lead and support project planners in developing a work breakdown structure, preparing project schedules and manpower, machinery, plant histograms, defining, and tracking key project milestones
• Develop corrective actions and forecast project progress trends based on findings
• Attend internal coordination meetings with subcontractors/suppliers
• Inform, highlight, and advise Project Manager/ Project Director if there are any indications of potential delays to the project
• Compare and benchmark the current project status against the project baseline, reviewing the status of the critical path
• Set planning targets for the site team, plan catch-up schedules, and allocate resources as needed
• Provide visibility and create accountability among stakeholders through clear metrics and reporting
• Track project changes, analyse, and understand their impact on project cost and timeline to ensure effective management
• Define and use KPIs to monitor project health, forecast trends, and take corrective actions as necessary
• Lead and support project risk management in identifying and monitoring project risks
• Develop contingency plans to address and mitigate any issues that arise during the project lifecycle
• Communicate regularly with team members and stakeholders to ensure alignment on project objectives and progress
• Prepare comprehensive project documentation, including reports, presentations, and updates for senior management and stakeholders
• Create, review, update, and administer the project delivery schedule and plans using Primavera software to ensure effective project management
• Liaise with the Project Manager and project team to discuss project activities, monitor progress, and update the project schedule as needed
• Coordinate with clients and other subcontractors’ planning teams to organise different phases of construction development effectively
• Prepare analysis reports containing milestone progress status, critical issues affecting project completion, resource loading plans, project recovery plans, and extension of time claims
• Monitor progress closely and highlight any potential delays in achieving project milestones to proactively address issues
• Inform, highlight, and advise Project Manager/ Project Director if there are any indications of potential delays to the project
• Prepare project progress S-Curves and rolling programs (1/3/6 months) to visualise project timelines and resource allocations
• Generate and update weekly and monthly project progress reports that include program analysis, accomplishment reports, photographic records, status of the critical path, and recommendations for timely project completion
• Engage in continuous improvement initiatives to enhance planning processes and methodologies within the team
• Other duties as assigned

Job Requirement:

• Preferably with a Degree in Civil/ Structural Engineering/ Construction or equivalent
• Minimum 5 years of experience in the construction industry
• Familiar with Singapore Codes and Practices
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera
• Good communication and interpersonal skills
• Able to work as a team and proactive
• LTA experience will be preferred