Total 16 job vacancies by Bosch Group

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

• Responsible as the line/process quality for the Sensors and ASICs production line. Ensure the line/process is complied with quality requirements. Interfacing with Process/ Equipment Engineer.
• Responsible for the product quality for Sensors and ASICs, internally and externally, including incoming product quality issues and customer issues. Interfacing with Product Engineer, Simultaneous Engineering (SE) Team, Central Customer Quality Engineer and/or Central Supplier Quality Engineer.
• Responsible to key in report, generate quality notification in SAP such as Q-Info, Delivery Release and QM-View.
• Responsible for the problem-solving coordination and moderation for the quality issue internally and externally as Problem Solving Expert.
• Responsible as the SPC coordinator for the Sensors and ASICs line.
• Support as PgP5 Internal Auditor, including audit execution, closing and effectiveness verification of audits focus on IATF 16949 and VDA 6.3.
• Support any external/customer audits, including follow-up and closing of related OPL.
• Support department 6S activity.
• Support change management 4M checklist verification.
• Support lessons learned activity. Sharing input to the lesson learned plant coordinator. 
• Support MSA study, including review of MSA study reported by Process/Equipment Engineer.
• Support Daily Leadership Meeting for any quality issue regarding Sensors and ASICs line.
• Responsible for return materials to supplier, including the improvement of the return process.
• Responsible for IB process for return material from customers.
• Responsible for continuous improvement in the area of responsibility.
• Execute any other related duties assigned by supervisor from time to time.

• As a subject matter expert, you will consistently work to improve our suppliers' performance and the quality of our products.
• Supplier Auditing: Own the auditing process across all supplier management phases, including potential analysis, Cooperate Social Responsibility audits, initial sample process audits and comprehensive process audits.
• Supplier Development: Lead and support supplier quality and cost improvement activities. Conduct workshops, trainings, and regular follow-up visits to enhance supplier capabilities and performance in line with Bosch's requirements.
• Problem Solving: Intervene in critical supplier quality issues. You will take the lead onsite when our global plants require local support or when progress is stalled. Your role is to expertly coach the suppliers to master and apply structured problem-solving tools (e.g., 8D, 5-Why, Ishikawa) to ensure root causes are identified and holistically eliminated.
• Supplier Escalation Management: Manage supplier escalations that require higher management involvement, including the implementation and execution of dedicated quality measures, through to successful de-escalation.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

Key Responsibilities

• Act as Plant Product Owner for assigned product families from manufacturing stage through end-of-life (EOL).
• Serve as the main interface between Plant and Development for all product-related HW/SW issues.
• Drive First Pass Yield (FPY) performance and implement continuous improvement actions to meet targets.
• Lead root cause analysis and problem-solving activities for production and quality issues (e.g., FOR, field returns, 0km defects).
• Take ownership as Task Force Leader for critical product or process issues, coordinating cross-functional resources.
• Support failure analysis (FA) activities and collaborate with teams to define effective diagnostic tools.
• Transfer product know-how from development to plant during industrialization and ensure smooth product ramp-up.
• Participate in new product development (NPD) phases to incorporate plant lessons learned and prevent recurring issues.
• Provide technical risk assessments and decision justification for quality-related concerns.
• Lead and support cost improvement initiatives (e.g., RPP, IDC) to achieve plant and corporate targets.
• Develop and implement engineering and automation solutions to improve efficiency and reduce scrap.
• Ensure manufacturing readiness through line buy-off, release, and validation activities.
• Conduct technical training for production technicians and engineers.
• Collaborate with internal teams, contract manufacturers (CM), and stakeholders to achieve operational goals.
• Support data analysis and reporting (e.g., SQL queries, technical presentations) for management and customers.
• Provide support in sample builds, testing, and evaluation activities during early product phases.
• Perform additional duties as assigned by management.

Design and development of hydraulic products – Electro-Hydraulic and Proportional Mobile control valves (Sectional,monoblock and HIC) and Joystick for Mobile hydraulics applicationsGood understanding of fluid mechanics and Hydraulic Schematic and circuit designGood understanding of various control system and selection to the requirements & applicationsGood understanding of Design of Pressure compensator and and Spool design for Load Sensing and flow sharing Control valvesConfiguration of the Control Valve for the requirements & applicationsWorking knowledge in Ratio Projects: Cost reduction, weight reduction analysis and implementationGood knowledge inProblem solving methods and solutioning.Design and manufacturing of castings, forgings and machining process for hydraulic productsGD&T, tolerance Stack up Application in HydraulicsAbility to independently deliver CAD models, manufacturing drawings according to ASME/ISO-GPS standardsGood communication and interpersonal skillsMobile Hydraulics domain knowledge is must.Added advantage: -Knowledge of injection molding parts and connector selectionTools & Methods required:Creo, Windchill PDM, SAP and AutoCADFMEA ,Root Cause Alaysis (RCA)

1. Support for activities claims handling including support for IQIS creation and delivery part preparation
2. Support for preparation and audit ISO 9001 activities
3. Monitoring and update status internal Bosch for pending item problem
4. Monitor and update status commercial cost affected from 0km or field problem
5. Support for warranty documentation activities
6. Support  SQW activities

• Responsible for product quality for the hydraulic systems like pumps, valves, power unit and cylinders.
• Responsible for customer complaints and initiate closure through systematic problem solving within defined timeline.
• Coordinating and resolving the internal/external Product/process quality topics along with CFT team involving Q-Methods support. Q-table participation from QMM department.
• Moderating Manufacturing Works quality to drive the corrective actions. Independent verification for corrective action implementation & effectiveness.
• Conduct process audit as per VDA standard, system audit as per ISO 9001 standard and spot audit.
• Representing Ahmedabad plant during various meeting with Germany team.
• Customer engagement through virtual and face to face meetings
• PPAP/ISIR submission to customers with compiling necessary Quality reporting from Manufacturing
• Moderation/Coaching of Quality Methods – FMEA, CP, 8D, 4Q and QG/APQP Support during ISO 9001 external audit

Unit Code: VM/EQM1-JP

Join our team to support digital transformation in engineering quality. You will work on improving workflows using data, automation, and digital tools, and help turn insights into practical improvements for real projects.

Your task(s) will include:

1. Explore and improve engineering workflows using digital tools
2. Create simple dashboards and visualizations from project data
3. Support automation and small AI use cases
4. Help translate data into clear insights for engineers and managers

This entry level role operationally assumes the responsibility in the 2WP Quality Management department with the intention to develop as a Quality Management professional over the following years. 

Some of the initial core tasks include, but not limited to:
• Management of the unit's IATF16949 compliant Quality Management System as the Process Architect
• Support the team the coordination of the unit's Business Reports to 2WP management and the Bosch Quality headquarters. After one year, ideally lead the business reporting
• Interface with 2WP partner-GB Quality Management organizations to standardize data inconsistencies. 
• Monitor KPIs concerning the department's objectives

Associate has the part responsibility for CRI, CRIN & NHA

Associate is responsible for the project planning of Preventive Quality (PQP).

Associate is in charge for the overall PQP-time scheduling within the project.

Interfaces are mainly to PPS/PQA/ENI-associates. He executes and finalizes the PQP-activities.

Therefore, he bears the full responsibility and is responsible for the part release at the supplier.

Associate is part of the SE-Team work and supports PPS in preparation of PE/PRs.

Roles & Responsibilities :

As part of an interdisciplinary research team you will combine methods from artificial intelligence, control theory and computer science with the product portfolio of Bosch. Future dynamics systems need to adapt themselves and handle uncertainties during operation while safeguarding functionality. Join us in transforming complex challenges into real-world impact. 

• Addressing technical challenges: You will analyze, model, and simulate dynamic and uncertain systems and develop secure approaches for solving complex learning and control engineering problems. 

• Systematically develop solutions: You will use data-based methods to improve model-based control concepts and apply them to constrained linear, nonlinear, and distributed systems with parameter and structural uncertainties. 

• Support Transfer: You maintain close contact with the customer, take into account product-specific requirements, and prepare solution approaches and minimum viable software products in a target-group-oriented manner. 

• Bring new ideas into life: You continuously monitor and evaluate academic and industrial research and adapt new approaches to Bosch products.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.