Total 178 Senior Executive structural engineer job vacancies in Others category in Singapore

Job Responsibilities:

• To conduct pre-inspection with subcon.
• Coordinate and supervise installation works carried out are in accordance to specs, shop drawings, method statements and local codes & regulations.
• To ensure site carry out according to daily site coordination.
• To conduct internal quality pre-inspection with sub-con.
• Inventory check on daily basis.
• Planning and manage site storage facilities, building materials and equipment.
• To manage and liaise with workers
• Control and minimize wastages.
• Ensure work activities are carried out in safe working environment.
• Ability to identify and Resolve any site issues faced at the work site.
• Ability to plan and coordinate inter disciplinary works and shop drawings.
• Receiving structural materials from suppliers.
• To keep site records (daily journal, concrete cubes, DO, etc.).
• Other adhoc duties as assigned by the Immediate Supervisor/ Management.

Job Requirements:

• Minimum of five (5) relevant experience, preferably in private residential projects.
• Willing to travel around project site offices within Singapore.
• Able to work in team and cope in a fast-paced environment.
• Independent, diligent and highly motivated with excellent team spirit.
• Relevant qualification of certificates in structural & architectural discipline (eg. NCCS, BCSS, Safety or Lifting).

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead cleanroom design and planning for semiconductor projects
• Develop cleanroom layouts, zoning, airflow, and pressure control concepts
• Coordinate cleanroom requirements with HVAC, electrical, and process teams
• Review cleanroom materials, finishes, and system specifications
• Support installation, testing, and commissioning of cleanroom systems
• Ensure contamination control and cleanroom protocols are met
• Resolve design and site-related cleanroom issues
• Liaise with clients, consultants, and contractors
• Ensure compliance with cleanroom standards and Singapore regulations
• Mentor junior engineers and designers
• Any other ad-hoc duties as assigned
  
  

Requirements

• Bachelor’s Degree in Mechanical, Chemical, or related Engineering field
• Minimum 5 years of cleanroom or semiconductor facility design experience
• Strong understanding of contamination control and cleanroom standards
• Proficient in AutoCAD or Revit
• Strong coordination and leadership capabilities
• Proficiency in Mandarin is required to liaise with Mandarin-speaking stakeholders, suppliers and project counterparts.

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead piping design for semiconductor and industrial facilities
• Develop layouts for process piping, UPW, chemical, and utility systems
• Perform pipe sizing, material selection, and stress considerations
• Review isometric drawings, layouts, and technical submissions
• Coordinate piping design with HVAC, cleanroom, electrical, and process teams
• Provide technical support during installation and commissioning
• Resolve design clashes and site-related piping issues
• Liaise with vendors and contractors on piping materials and standards
• Ensure compliance with project specifications and Singapore regulations
• Mentor junior engineers and review their design work
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Mechanical Engineering or related field
• Minimum 5 years of piping design experience, preferably in semiconductor projects
• Strong knowledge of process piping, UPW, and industrial utility systems
• Proficient in AutoCAD, 3D piping software, or Revit
• Good understanding of fluid mechanics and piping standards
• Strong coordination and leadership skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead HVAC design development for semiconductor and cleanroom facilities
• Perform cooling load calculations, system sizing, and equipment selection
• Prepare and review HVAC layouts, ducting, and airflow designs
• Coordinate HVAC design with cleanroom, electrical, piping, and process teams
• Review shop drawings, technical submissions, and method statements
• Support installation, testing, and commissioning of HVAC systems
• Troubleshoot design and site-related HVAC issues
• Liaise with clients, consultants, vendors, and contractors
• Ensure compliance with BCA, NEA, WSH, and project specifications
• Mentor junior engineers and provide technical guidance
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Mechanical Engineering or related field
• Minimum 5 years of HVAC design experience, preferably in semiconductor or industrial projects
• Strong knowledge of HVAC systems, heat transfer, and airflow control
• Proficient in AutoCAD, Revit, or similar design tools
• Experience in cleanroom HVAC systems is highly preferred
• Good coordination, leadership, and problem-solving skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

• Location: Woodland
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM –12:30 PM)
• Willingness to commit to extended hours & night shift

Job Responsibilities

• Lead the development and review of mechanical designs, schematics, and layouts for HVAC, ultra-pure water (UPW), cleanroom ventilation, process piping, and specialty gas distribution systems.
• Perform and validate complex load calculations, equipment sizing, system modelling, and material selection to meet stringent semiconductor facility requirements.
• Provide technical oversight for thermal management, vibration control, and contamination-prevention strategies in cleanroom and sub-fab environments.
• Lead and supervise installation works for pumps, compressors, heat exchangers, cooling towers, and mechanical utility systems, ensuring compliance with design intent and quality standards.
• Coordinate closely with civil, electrical, process, and tool-installation teams to ensure seamless integration of all mechanical systems.
• Ensure strict adherence to cleanroom protocols and contamination-control requirements during construction and installation.
• Troubleshoot complex mechanical system issues and provide engineering solutions during commissioning, start-up, and qualification stages.
• Manage and oversee vendor and contractor performance, ensuring timely delivery, quality workmanship, and alignment with project milestones.
• Ensure compliance with BCA codes, WSH regulations, NEA requirements, and relevant SEMI/ASHRAE/ISO standards.
• Review and approve mechanical method statements, shop drawings, material submissions, testing procedures, and commissioning documentation.
• Any ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Mechanical Engineering or equivalent.
• Minimum 5–8 years of relevant experience in semiconductor wafer fabs, cleanrooms, data centres, pharmaceutical plants, or complex industrial facilities.
• Strong expertise in HVAC, process piping, UPW, specialty gas, and mechanical utility systems.
• Proficiency in AutoCAD, SolidWorks, Revit, or similar mechanical design and modelling software.
• Strong knowledge of SEMI standards, ASHRAE cleanroom guidelines, and ISO 14644.
• Solid understanding of thermodynamics, fluid mechanics, system integration, and mechanical safety engineering.
• Proven ability to lead coordination with multidisciplinary teams and manage contractors effectively.
• Strong problem-solving skills with the ability to resolve complex technical issues independently.
• Must be able to communicate in Mandarin to be able to liaise with Mandarin speaking associates

• Location: Woodlands
• Working Hours: 5.5 days per week (Mon to Fri: 8:00 AM – 5:30 PM, Sat: 8:00 AM – 12:30 PM)
• Willingness to commit to extended hours

Job Responsibilities

• Lead electrical design for semiconductor construction projects
• Develop power distribution, lighting, grounding, and earthing systems
• Perform load calculations, cable sizing, and equipment selection
• Prepare and review electrical schematics, layouts, and drawings
• Coordinate electrical design with mechanical, cleanroom, and process teams
• Review shop drawings and technical submissions
• Support installation, testing, and commissioning of electrical systems
• Liaise with clients, consultants, and contractors
• Ensure compliance with BCA, EMA, WSH, and relevant electrical codes
• Guide and mentor junior engineers
• Any other ad-hoc duties as assigned

Requirements

• Bachelor’s Degree in Electrical Engineering or related field
• Minimum 5 years of electrical design experience, preferably in semiconductor or industrial projects
• Strong knowledge of power systems and electrical codes
• Proficient in AutoCAD, Revit, or electrical design software
• Good coordination, leadership, and troubleshooting skills
• The candidate must be fluent in both Mandarin and English to communicate effectively with internal teams and external stakeholders
• Candidates with good experience will be considered for a higher role, and the salary will be commensurate accordingly

Job Description

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements

• Degree in Civil/Structural Engineering / Building
• Min 5 years structural coordinator experience in building construction Project
• Good knowledge of Structural specifications & requirements
• Preference will be given to those who can commence immediately

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil/Structural Engineering / Building
• Min 5 years Senior Structural Coordinator experience
• Preferably hospital project experience
• Good knowledge of Structural specifications & requirements

Job Responsibilities

• Apply statistical tools (SPC, DOE, FDC, ECMS) t optimize equipment performance and robustness.
• Establish and optimize Preventive Maintenance (PM) plans to improve equipment quality, cost, and productivity.
• Work with vendors to resolve equipment issues and improve performance.
• Collaborate with Process and Manufacturing Engineers to address yield, WAT, and operational issues.
• Manage spare parts and consumables inventory to support maintenance based on production forecasts.
• Lead new equipment start-up from facility hookup to production acceptance.
• Drive continuous improvement projects to enhance equipment efficiency, reliability, and cost reduction.
• Set targets to minimize wafer scrap, reduce equipment cost per wafer, and optimize utilization.
• Provide training and guidance to AEs and TAs on troubleshooting, equipment knowledge, and risk assessment.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for issue resolution.
• Develop long-term solutions for recurring hardware and operational issues.
• Create and maintain implant operation SOPs and work instructions.

Job Requirement:

• Degree in Electrical / Electronics / Mechanical /Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 3 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500,VIISTA900, VIISTA HCP, GSD, Axcelis HE/VHE. AMAT XR80.
• Strong logical thinking capability and good analytical skill
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

about the company

A leading financial institution in Asia with an extensive global network and a heritage spanning over eight decades. This organization is committed to driving digital transformation and innovation within the banking sector, fostering a team-based culture focused on long-term success and excellence in customer service.

about the job

Take the lead on a major digital transformation project focused on enhancing cross-border payment capabilities and mobile banking infrastructure.

• Direct the end-to-end delivery of testing services for a high-priority digital payments initiative.

• Oversee the performance and output of appointed external service providers to ensure alignment with organizational quality standards.

• Collaborate with diverse internal stakeholders across infrastructure and security to meet project milestones and technical requirements.

• Monitor and report on key performance indicators and service level agreements to maintain high delivery standards.

• Act as the primary point of contact for issue resolution and escalation within the digital domain.

skills and experience required

• At least 10 years of experience in test delivery within large-scale, complex environments, specifically in the financial services sector.

• Demonstrated expertise in managing multiple external vendors and third-party service providers.

• Proficiency in modern delivery methodologies including Agile, DevOps, and Waterfall.

• Technical familiarity with industry-standard testing tools such as Selenium, JIRA, or mobile automation frameworks.

• Strong leadership capabilities with a track record of managing diverse, multi-cultural teams.

Please click on the 'apply' button to apply online. For more information, please reach out to Amrita Chandran. (EA: 94C3609 / R1440037)

Job Description

• Comply with the local construction code and approved Quality document
• Assist project teams to identify quality requirements and develop Project Quality Plans for projects
• Conduct inspection reports for all subcontractors work to ensure alignment with the quality standards
• Assist Project Teams with control vendor performance/non-conformance issues and implement actions to correct non-compliance
• Prepare and submit Request for Inspection (RFI) to consultant prior to official QA/QC inspection and testing activity
• Carry out the execution of the project as per plan
• Register all incoming materials and items for the project
• Responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements
• Review project safety (e.g. lifting plans, etc.)
• Other ad hoc duties as assigned

Job Requirements

• Degree in Civil Engineering or equivalent
• At least 5 years of working experience in the related field is required
• Ability to work with tight deadlines
• Work closely with project team to resolve technical issues
• Good attitude and communication skills
• Willing to multi-task
• Need to be stationed at site
• Willing to work 6 days at project site
• Location: East

As a Senior High Bandwidth Memory Test Engineer at Micron, you will develop, debug, and maintain code that enables the parallel testing of advanced memory devices. Micron Test Engineers support R&D, interacting closely with global teams, as well as taking part in the designing and debugging of test hardware. In this position, you will constantly learn new device specifications and operations in order to develop efficient and innovative solutions of production test flows thru test algo optimization. Additionally, you will take responsibility to gain a firm understanding of the functionality of advanced memory devices as defined in product data sheets.

RESPONSIBILITIES AND TASKS:

• Experienced of definition of Test Plans for new tests and test algorithms for HBM, which covers test software and hardware requirements, defect coverage, characterization, trending, process flow, and test times.

• Experienced on test programs development for products using primarily Python and C coding on automated test equipment in the given area followed by test program release to manufacturing area.

• Demonstrate a thorough understanding of the device/part as it applies to device/part testing.

• Ensure all test programs, scripts, and any other software adhere to the release quality standards. 

• Independently debug and identify root causes on test issues and provide solutions across internal/external groups.

• Provide meaningful statistical data analysis, analytics and justification on program validation and its release to ensure program quality.

• Evaluate and verify yields/quality with global teams to ensure we are shipping the highest quality product to our customers with enforce to all data sheet specifications.

• Support both internal and external groups on experiments designed to improve yield or capacity by resolving test issues that impact site in a timely manner.

• Drive Innovation and Improvement with the end goal of reducing the Cost of Test for Micron in the Test Department.

• Support intra-departmental (and multi-site) teams in development of new processes and capabilities to support product roadmap; lead teams and drive development where necessary.

• Communicate effectively with both internal and external customers Implement Solutions to Issues Related to Probe and Test processes in a Timely Manner 

• Demonstrate ability to leverage on existing resources Serve as a Liaison and Coach 

• Actively share and/or present technical information to a wide variety of audiences, including formal presentations (when necessary) to area, department, site, or larger industry groups 

REQUIREMENTS:

• Bachelor’s Degree in Electrical, or Electronics Engineering 

• Minimum 5 years of experience in test solution engineering in semiconductor industry.

• Experienced in digital systems and digital logic for DRAM or HBM.

• Strong logical thinking and problem solving.

• Display Micron Value of People. Innovation, Tenacity, Collaboration and Customer Focus
  

  Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel.

Delivery and Performance:

• Assist with the production of budget estimates for project deliverables;
• Support the development of work plans and budgets for all activities in the project;
• Assist with and participate in internal and external reviews;
• Provide quality assurance support;
• Support the maintenance of all works efforts, to ensure they are delivered on time, to cost and quality standards;
• Seek to identify any project obstacles, barriers or any unanticipated risk events;
• Assist the PM to plan, monitor and evaluate project procurement;
• Ensure the integrity of financial and administrative operations in the project.

Method & Technical:

• Develop and implement construction methodologies and techniques specific to post-tensioning, Launching Gantry and Lifting Frame.
• Collaborate with clients to analyse project requirements and develop innovative solutions.
• Troubleshoot complex technical issues and implement solutions in real-time.

Cost Control:

• Monitor project expenses and financial performance, identifying cost-saving opportunities.
• Collaborate with procurement teams to optimize material and equipment purchases.

Project Control

• Track project execution by ensuring timely and adequate reporting;
• Monitor all project activities in relation to the respective project work plans and take corrective action, when necessary, to ensure the timely and cost-effective delivery of project outputs;
• Monitor project progress, identify improvement opportunities, assist with the revision of work plans and advice the project director of possible adjustments to meet the project objectives;
• Monitor contract obligations, develop management systems and accountabilities to ensure all contract obligations are tracked and met, including contractor and client contract obligations.

Safety and sustainability

• Ensure compliance with Workplace Safety and Health (WSH) policies and practices;
• Assess inspections to ensure compliance with organisational health and safety policies, processes and procedures;
• Assess records of accidents and incidents against WSH policies and practices;
• Apply organisational environmental sustainability and green building standards and guidelines;
• Implement risk management plans and risk controls in alignment with organisation's risk management framework.

Personnel Management:

• Lead and motivate the project team;
• Ensure that performance reviews are conducted;
• Ensure safety for all personnel and comply with the company standards

Qualifications and Experience Education

• University Degree in Civil Engineering, Project Management, or other relevant discipline.

Languages

• Fluency in written and spoken English is required.

Work Experience

• Minimum 10 years of relevant experience in project development.
• Experience in Bridge Project with erection works using specific Equipment (Launching Gantry, Lifting Frame) and Post-Tensioning system works.

Additional Requirements:

• Competent in the use of all commonly used computer software – outlook, Microsoft, Teams.
• Able to read and understand technical drawings.
• Ability to work independently, handle multiple tasks, work under pressure and deliver assignments on time.

Company Overview

LEE TECH ENGINEERING PTE. LTD.

Job Summary

As a Senior Engineer at LEE TECH ENGINEERING PTE LTD, you will lead and coordinate engineering projects, ensuring compliance with standards and client requirements while driving project progress and delivering technical solutions in a dynamic construction environment.

Responsibilities

• Prepare and manage documentary work for tenders, progress reports, handover documents, and as-built drawings to support project milestones
• Monitor project progress against schedules to ensure timely delivery and identify deviations for corrective action
• Analyze and resolve air-conditioning system issues to maintain operational efficiency and client satisfaction
• Prepare, schedule, coordinate, and oversee assigned engineering projects to meet quality and performance standards
• Ensure all engineering activities comply with applicable codes, QA/QC policies, performance standards, and specifications
• Communicate effectively with clients to understand their needs and represent their interests on-site
• Assign responsibilities and mentor project team members to enhance team performance and project outcomes
• Collaborate closely with project managers and stakeholders to provide technical support and facilitate problem-solving
• Independently review engineering deliverables and implement corrective actions to maintain project quality and compliance
• Address customer complaints and feedback promptly to uphold service excellence and client relationships

Preferred competencies and qualifications

• At least 3-5 years of related working experience is preferred.
• Open to candidates of all experience levels.
• Minimum relevant certificate in Mechanical Engineering
• Proficiency in MS Project and AutoCAD to support project planning and technical documentation
• Strong communication skills to engage with clients, team members, and project stakeholders effectively
• Ability to work independently and manage multiple tasks in a fast-paced environment
• Positive attitude with willingness to work extra hours as needed
• Availability to start immediately or with short notice

Other Information

• Location: Island Wide
• Salary Range: $4000 - $5000
• Interested candidates, please email your resume to leetech@leetech.com.sg