Total 1,373 engineering job vacancies in Others category in Singapore

*** Transport workers to and from work sites.

*** Collect and deliver goods/materials.

*** Supervise and monitor workers on-site.

Prepare shop drawings, construction drawings, As-Built drawings by AutoCAD, 3D Design by 3ds Max, Revit, ensuring accuracy and completeness for submission.

* Assist and coordinating project activities.

* Project administration tasks and document management and progress tracking.

* Perform other duties to support project needs

Requirement:

* Education : Diploma in Electrical Engineering or relevant

* Proficient in AutoCAD, Revit, 3ds Max

* With 2 years Electrical drafting/drawing experience

* Good communication skills.

* Positive working attitude, Self-motivated

Job Responsibilities

• Operate the tower crane safely and efficiently to lift, move, and position construction materials and equipment at site.
• Conduct daily pre-operation inspections and routine checks to ensure the tower crane is in safe working condition.
• Assess load weights and lifting capacities before each lifting operation to ensure compliance with safe working limits.
• Work closely with riggers, signalmen, lifting supervisors, and site personnel to execute lifting activities according to approved lifting plans.
• Follow all safety procedures, site regulations, and operational guidelines to prevent accidents and incidents.
• Maintain accurate records of crane operations, inspections, and maintenance activities.
• Report any defects, malfunctions, or safety concerns to the supervisor and maintenance team promptly.
• Ensure housekeeping around the crane access area and maintain a safe working environment.
• Comply with company policies, workplace safety requirements, and relevant government regulations.

Job Requirements

• Minimum 3–5 years of experience operating tower cranes in construction projects.
• Possess a valid Tower Crane Operator Certificate and MOM-approved Crane Operator Licence in Singapore.
• Strong knowledge of tower crane operations, load charts, lifting procedures, and workplace safety requirements.
• Familiarity with lifting plans, rigging practices, and standard hand signal communication.
• Good understanding of relevant WSH regulations and industry best practices.
• Physically fit and able to work in a fast-paced outdoor construction environment.
• Ability to work independently and collaboratively with site teams.
• Responsible, safety-conscious, and committed to maintaining high operational standards.

Company Overview / Employee Value Proposition

ENGINEERING SERVICES of Electrical & Instrumentation

• Construction, Design, Testing & Commissioning and Operation of Metro rail projects for Power supply system and Sub system like ETTS, SCADA, and Substation automation.
• Project Management for Industrial projects and Thermal power plants
• Preparation of O&M Manual & Training arrangement
• Project management consultancy, Training, & development support
• Engineering Consultancy
• Equipment delivery for all kind of industries.

Job Summary

The Commissioning Technician is responsible for installing, testing, commissioning, and troubleshooting electrical/mechanical systems to ensure they operate safely and in accordance with project specifications and standards.

Responsibilities

• Install electrical and mechanical systems and equipment following project specifications and safety standards
• Perform functional tests, inspections, and performance checks according to technical drawings and specifications
• Identify, troubleshoot, and resolve faults during testing and commissioning to ensure system reliability
• Assist engineers with system start-up and site acceptance tests to verify operational readiness
• Prepare accurate test records, commissioning reports, and handover documents for project documentation
• Ensure all commissioning activities comply with safety regulations and project requirements
• Coordinate effectively with site teams, clients, and subcontractors to support smooth commissioning processes
• Provide technical support during defect rectification and warranty periods to maintain system performance

Required competencies and certifications

• Diploma/ITE or equivalent in Electrical, Mechanical, or related field
• Ability to read and interpret technical drawings and specifications accurately
• Knowledge of testing and commissioning procedures for electrical/mechanical systems
• Competence in fault finding and problem-solving during commissioning activities
• Familiarity with site safety procedures and work permit requirements
• Willingness to work on-site and support project schedules

Preferred competencies and qualifications

• Relevant experience in testing and commissioning works
• Skills in documentation, reporting, and team coordination during site activities

We are seeking a dedicated and detail-oriented Continuous Improvement Engineer to join our team at ST Engineering Aerospace Engines Pte. Ltd. This role, aligned with the TR-Continuous Improvement Level 3 designation, offers a challenging and rewarding opportunity for an individual passionate about driving operational excellence through automation and process enhancements.

As a Continuous Improvement Engineer, you will be instrumental in identifying, developing, and implementing innovative solutions that enhance productivity, quality, and efficiency across our aerospace manufacturing and engineering processes. You will collaborate closely with cross-functional teams including engineering, production, quality assurance, and supply chain to streamline workflows and incorporate automation technologies that support our commitment to safety, reliability, and industry-leading standards.

Key Responsibilities:

• Lead and facilitate continuous improvement initiatives by analyzing current processes and recommending improvements that reduce waste and optimise resource utilisation

• Work collaboratively with various departments to identify areas to add value and help achieve business goals.

• Employ data-driven approaches, including Lean, Six Sigma, Kaizen, or similar methodologies, to monitor and measure improvement impacts.

• Coach and support team members and stakeholders in continuous improvement principles to foster a culture of innovation and sustained performance improvement.

• Prepare detailed reports, presentations, and documentation to communicate progress, challenges, and outcomes to management and stakeholders effectively.

• Ensure compliance with safety regulations and quality standards while implementing new processes and technologies.

• Stay updated with technological advancements and best practices and industry trends relevant to aerospace engineering.

Qualifications and Skills:

• Degree in Engineering, Industrial Engineering, or a related field.

• At least 3 years of experience in driving transformative LEAN or Six Sigma projects.

• Proven passion and experience in continuous improvement roles within manufacturing or aerospace sectors, particularly involving automation projects.

• Strong analytical and problem-solving skills with the ability to interpret complex data and drive strategic solutions.

• In-depth knowledge of continuous improvement methodologies such as Lean and Six Sigma (Green Belt Qualification Preferred)

• Excellent communication and interpersonal skills, enabling effective collaboration across diverse teams and management levels.

• Proactive and adaptable, with a keen eye for detail and a passion for innovation.

• Familiarity with safety and quality standards applicable to aerospace MRO environments.

Why Join Us?

At ST Engineering, you will be part of a dynamic and forward-thinking organisation that values innovation, quality, and teamwork. We offer an inclusive working environment that supports professional growth and cross-disciplinary collaboration. This role presents an excellent chance to contribute to impactful projects that advance the aerospace industry while developing your career in continuous improvement and automation engineering.

We encourage applications from individuals who are motivated to make a difference and thrive in an environment where continuous learning and improvement are at the core of our values.

Fourway Engineering Pte Ltd is an ISO certified company which specialized in the design and manufacturing of Electrical Switchboard, Smart Panel, ACMV Panel, LCP and all types of customized empty metal enclosures.

We are looking for a experienced Purchaser to join our team.

Job Responsibilities:

• Assist in raising purchase orders.
• Verify documents such as Delivery Orders (DO), Purchase Orders (PO), and other related paperwork.
• Assist in sourcing suppliers, obtaining quotations, evaluating offers, and negotiating prices and terms.
• Liaise and follow up with suppliers on products and stock availability.
• Monitoring and tracking purchase orders to ensure timely delivery of items.
• Interact closely with suppliers and Managers/Engineers to resolve quality issues.
• Maintain accurate records and documentation related to all purchasing activities.
• Assist in ISO audit documentation.
• Perform ad-hoc duties as assigned, as and when required.

Job Requirements

• Diploma in Purchasing and Supply Management, business management, logistics or a related field.
• 1-2 years of experience in purchasing or procurement.
• Those without purchasing experience may also be considered.
• Proficient in MS Excel and Word.
• Detail-oriented, with good organizational and communication skills.
• Possess strong communication and interpersonal skills.
• Able to work independently as well as in a team.
• Positive work attitude and willingness to learn.
• Ability to work under pressure and meet deadlines.

Interested applicants are invited to submit a detailed resume, including:

• Current and expected salary
• Earliest availability

Note: Singapore Citizens and Permanent Residents (PRs) will be considered for this position.

• Prepare and revise architectural drawings using AutoCAD, Revit, or similar software.
• Develop construction drawings, plans, and detailing.
• Ensure drawings comply with project requirements and industry standards.
• Coordinate with architects, engineers, and project teams.

• Proficiency in AutoCAD, Revit, and MS Office.
• Ability to read and interpret technical drawings.
• Good attention to detail and communication skills.
• Relevant drafting experience is an advantage.

Job Responsibility

We are seeking for a Financial Accountant who can perform a multitude of responsibilities, including:

Financial Operations

• Full-set accounting including AP, AR, and GL

• Daily bank reconciliation and ledger maintenance

• Fixed asset management, accruals, and prepayments

Month-End Closing & Reporting

• Completion of monthly close within D+10 timeline

• Preparation of Trial Balance, P&L, and Balance Sheet

• Variance analysis and reporting

Taxation & Compliance

• GST filings (quarterly) and reconciliations

• Corporate tax support (ECI, Form C-S/C)

• Payroll statutory compliance (CPF, IR8A, etc.)

Qualifications and requirements

A degree is preferred although it is not always mandatory. A qualification in the following is particularly favoured:

• Accounting/Business/Economics degree

• CPA / ACCA or its equivalent

Soft and Technical skills to have:

• Good working knowledge of Microsoft Dynamic Business Central

• Well-versed in MS Office, especially MS Excel, PowerPoint and Word

• A self-starter who is able to plan, organise and take initiative to meet job objectives and deadlines independently

• Can-do attitude, driven and passionate about work

• Strong verbal and written communication skills

Company Overview / Employee Value Proposition

ENGINEERING SERVICES of Electrical & Instrumentation

• Construction, Design, Testing & Commissioning and Operation of Metro rail projects for Power supply system and Sub system like ETTS, SCADA, and Substation automation.
• Project Management for Industrial projects and Thermal power plants
• Preparation of O&M Manual & Training arrangement
• Project management consultancy, Training, & development support
• Engineering Consultancy
• Equipment delivery for all kind of industries.

Job Summary

Responsible for the installation, testing, and commissioning support of 22kV switchgear systems in substations and electrical rooms, ensuring all works comply with approved drawings, specifications, and safety standards.

Responsibilities

• Install 22kV switchgear panels by positioning, aligning, and fixing components according to project drawings
• Perform cable termination, busbar connections, earthing, and inter-panel wiring following approved schematics
• Inspect panel assembly for mechanical integrity and verify electrical connections for accuracy
• Conduct pre-commissioning checks including insulation resistance, continuity, and torque verification to ensure system readiness
• Assist engineers and client representatives during testing and commissioning activities to support project completion
• Identify and correct installation defects or non-conformities to maintain quality standards
• Follow site safety rules, lock-out/tag-out, and permit-to-work procedures to ensure a safe working environment
• Prepare installation checklists, test records, and as-built documentation to maintain accurate project records
• Coordinate with site team members, supervisors, and other trades to meet project schedules efficiently
• Maintain good housekeeping practices and protect installed equipment from damage during installation and commissioning

Preferred competencies and qualifications

• ITE/Diploma or equivalent in Electrical Engineering or related field
• Experience in MV (Medium Voltage) switchgear installation works
• Ability to read and understand single line diagrams, schematics, and layout drawings
• Familiarity with electrical safety practices and site procedures
• Willingness to work on site and support project timelines

Job Description

• Responsible for accomplishing the project objectives within the constraints such as project scope, time, cost and quality Interpret technical designs and drawings for construction on-site
• Ensure the project complies with regulations and clients’ specifications
• Coordinate M&E services and prepare CSD/SEM drawings for submission
• Coordinate the integration of Civil, Architectural and M&E works on site with clients, consultations and subcontractors
• Plan, develop and monitor work schedules to ensure timely completion of allocated tasks and schedules
• Prepare reports to clients and project manager on progress, delays, defects and rectification measures for the M&E works
• Provide technical advice and resolve M&E technical issues
• Reporting the progress of M&E works and arranging site inspections with system-wide contractors, sub-contractors and clerk-of-works

Requirements:

• Diploma / Degree in Mechanical or Electrical Engineering
• Minimum 3 years of relevant experience

Electrical Site Supervisor

ensures that all electrical installations on a construction, industrial, or infrastructure site are executed safely, correctly, and on schedule

. They translate engineering designs into physical installations by directly managing the workforce, materials, and safety protocols on the ground.

Here is the comprehensive breakdown of their roles and responsibilities specifically for on-site works

.

Key Responsibilities

1. Process and verify staff expense reimbursement claims and ensure all supporting documents are complete and accurate.
2. Organize, file, and maintain accounting records, invoices, receipts, and other financial documents for proper record-keeping and audit purposes.
3. Assist in the preparation of payment vouchers and other accounting-related documentation.
4. Ensure all accounting documents are properly recorded and maintained in accordance with company procedures.
5. Perform data entry and update accounting records accurately and promptly.
6. Liaise with internal departments regarding reimbursement submissions and documentation requirements.
7. Provide general administrative and clerical support to the Accounts Department.
8. Assist with ad hoc duties and assignments as and when required.

Requirements

• Minimum GCE ‘O’ Level, Diploma, or equivalent qualification in Accounting, Finance, Business Administration, or related disciplines.
• Prior experience in accounting or administrative work will be an advantage.
• Proficient in Microsoft Office applications, particularly Excel.
• Meticulous, organized, and able to maintain confidentiality of financial information.
• Good communication and interpersonal skills with the ability to work independently and as part of a team.
• Proficient in both English and Mandarin (written and spoken) to communicate effectively with English- and Mandarin-speaking stakeholders.

Job Description:

• Collaborate and communicate effectively with architectural services and other trades on-site.
• Manage architectural work scheduling, material procurement, cost control, project oversight, and documentation.
• Assist in the implementation, monitoring, and review of a construction management plan.
• Supervise and inspect all architectural work performed by sub-contractors.
• Ensure adherence to architectural specifications and maintain high-quality standards.
• Ensure that stakeholders are actively engaged and that beneficial relationships between the project and the client, subcontractors, community, and other external parties are developed and maintained
• Support the Project Manager in all coordination work of civil, structural, architectural and System-Wide Contractors (SWCs)
• Study drawings and coordinate architectural works with the consultants and subcontractors to resolve any technical / site issues
• Ensure architectural works are carried out according to specifications / drawings
• Inform Project Director / Project Manager on any technical / site problems pertaining to architectural works
• Supervise the progress of architectural works on site
• Coordination of sub-contractor's architectural work and ensuring the work is on schedule
• Ensure compliance with architectural specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation in accordance to master programme
• Prepare and coordinate on quality management and CONQUAS assessment

Job Requirements

• Degree in Architecture, preferably a degree recognized by BOA
• Min 5-7 years relevant main contractor experience in Design & Build building project
• Good knowledge of architectural specifications, Architectural & MEP coordination works and requirements
• Possess strong leadership
• Commitment and responsibility towards the role
• Proactive and adaptable
• Excellent communication skills

Core Responsibilities

• Enforce EHS rules & regulations to prevent pollution and for safety and health workplace
• Develop, review and update EHS policies and related documents
• Conduct regular EHS inspections, recommend control measures , monitor and improve WSH performance
• Implement training programs to employees in EHS related matters consistent with the needs of their respective functions

Job Specifications

• Specialist Diploma or above, preferably Occupational Safety and/or environmental health or related fields
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of EHS
• At least 5 years’ experience as WSHO in the construction industry, preferably with prior experience involved in Sewer projects

Job Description & Requirements

* CNC Wire Cutting (Sodick Machine) / EDM & Grinding

* Expert / Intermediate level: Minimum 3 years of relevant experience

* ACAM / AutoCAD / SolidWorks experience

* 5-day work week

* Willing to work overtime

* Work location: Near IMM / Jurong East MRT

We welcome all eligible applicants to apply.

Interested applicants may apply via MyCareersFuture portal

or Email: jasonLnprecisionengrg@gmail.com