Total 129 manufacturing job vacancies in Engineering category in Singapore

Junior Manufacturing Engineer (Chinese Speaker)

• Male & Female

• Chinese Speaking is a must

• Fresh graduate encourage to apply

• Salary: RM2500 to above (depends on experience)

JOBSCOPE :

• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.

• Liaising with other engineers to develop plans that improve production, costs, and labor required.

• Diagnosing problems in the production line and providing recommendations and training.

• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.

• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.

• Identifying, documenting, and reporting unsafe practices.

• Analyzing all facets of production and making recommendations for improvement.

Perks & Benefits

• Nearby public transport
• Central location
• Flexible working hours
• Free snacks / Happy hours
• Medical insurance
• Open culture

初級製造工程師（中文流利）

• 男性和女性

• 必須會說中文

• 歡迎應屆畢業生申請

• 薪資：2500 馬幣起（視經驗而定）

工作範圍：

• 監督生產過程，確保以安全、有效率的方式完成高品質的工作。

• 與其他工程師聯絡，制定改善生產、降低成本和減少勞動需求的計畫。

• 診斷生產線中的問題，並提供建議和訓練。

• 制定安全程序和規程，既要考慮到工人的福祉，又要最大限度地減少碳足跡。

• 隨時了解工程和生產的進展，並與同事分享知識。

• 辨識、記錄和報告不安全行為。

• 分析生產的各個方面，並提出改進建議。

福利待遇

• 附近公共交通
• 中心位置
• 彈性的工作時間
• 免費小吃/歡樂時光
• 醫療保險
• 開放文化

Requirements

·      Degreeon Mechanical/Electrical/Electronic Engineering or equivalent

·      Min3 years on Semiconductor or Manufacturing Industry

·       Knowledgeable in Equipment Assemblyand Test, hands-on experience with manufacturing tools.

·       Equipment troubleshooting andmaintenance.

·       Data Analysis and Problem-solvingskills, 8D/5 Whys/FMEA/CAPA.

·       BOM management and technical drawinginterpretation skills

·       Advance Microsoft Office skills withgood communication and writing skills.

Responsibilities

·       Primarily responsible for managingECOs for both new and existing products.

·       Create and maintain mFlow, PCP, pFMEA,and Work Instructions (WI).

·       Raise internal Engineering ChangeRequests (ECR) when required.

·       Support and drive continuous processimprovement initiatives to enhance quality and efficiency.

·      Cross-functional coordination with Procurement, BDG, Planner, and Buyerand QA

·      Support and oversee FA (First Article) builds to ensure compliance withEngineering requirements.

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Performs under the general direction of the Engineering department head.
• Work with Customers and Company counterparts on mechanical assembly design as well as the applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• Design new products using 3D CAD and perform FEA modelling.
• Design jig & fixture for new product whenever necessary.
• Define the manufacturing processes for new product and create the shop floor router accordingly.
• Check the drawings accuracy and release for prototype development and mass production.
• Focus person of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Setup Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Focus person to liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.

Requirement

• Min Degree in Mechanical, Manufacturing or relevant
• Min 3 years of experience in mechanical product design with jig & fixture design in manufacturing industry
• Proficiency in Solidworks 3D modelling and AutoCad.
• Familiar with machining and stamping parts fabrication processes.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Performs under the general direction of the Engineering department head.
• Work with Customers and Company counterparts on mechanical assembly design as well as the applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• Design new products using 3D CAD and perform FEA modelling.
• Design jig & fixture for new product whenever necessary.
• Define the manufacturing processes for new product and create the shop floor router accordingly.
• Check the drawings accuracy and release for prototype development and mass production.
• Focus person of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Setup Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Focus person to liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.

Requirement

• Min Degree in Mechanical, Manufacturing or relevant
• Min 3 years of experience in mechanical product design with jig & fixture design in manufacturing industry
• Proficiency in Solidworks 3D modelling and AutoCad.
• Familiar with machining and stamping parts fabrication processes.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Process Engineer (CNC Machining) - Milling/Turning/EDM/Lathes

• Up till $6500 Basic + AWS + Variable Bonus
• Monday-Friday, 7.30am-5pm
• Location: Pioneer (transport provided)
• 3 years of experience in CNC machining or related processes

RESPONSIBILITIES:

• The Process Engineer (Machining) will be responsible for industrializing machining processes (includes CNC mill/turn, EDM, lathes) for gas turbine component repairs.

• This role includes the implementation and qualification of new equipment and technologies, as well as driving continuous process improvement initiatives.

• Industrialize machining processes for new and existing products - Qualify CNC milling/turning, EDM, lathes, and other machining processes to ensure they meet specifications and quality standards.

• Collaborate with cross-functional teams to optimize machining processes for manufacturability and cost-effectiveness.

• Ensure all machining processes adhere to Safety, Quality, Delivery, and Cost (SQDC) standards.

• Monitor and report on key performance indicators (KPIs) related to machining processes.

• Implement corrective actions to address any deviations from SQDC standards.

• Lead risk reduction and quality improvement projects to enhance machining processes.

• Drive productivity and sustainability projects to reduce waste and improve efficiency.

• Utilize Root Cause Analysis (RCA) tools and methodologies to solve complex problems.

• Provide technical guidance, training and support to machining operators and technicians.
  

REQUIREMENTS:

• Bachelor degree in Mechanical Engineering from a recognized university.

• 3 years of experience in CNC machining or related processes

• Knowledge of gas turbine component repair is advantageous.

• Familiarity with tooling selection, fixture design, CAD, CAM, and metrology.

• Proficiency in reading and interpreting engineering drawings and specifications.

Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Gul Circle

Up to $3,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - Apple.lim@manpower.com.sg

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Responsibilities

• Performs under the general direction of the Engineering department head.
• Work with Customers and Company counterparts on mechanical assembly design as well as the applications.
• Study and analyze customer design requirement, specifications, and other data to evaluate the feasibility, cost, and tooling/equipment requirements.
• Design new products using 3D CAD and perform FEA modelling.
• Design jig & fixture for new product whenever necessary.
• Define the manufacturing processes for new product and create the shop floor router accordingly.
• Check the drawings accuracy and release for prototype development and mass production.
• Focus person of NPI activities, to co-ordinate and follow through FAI build to identify potential issues and take preventive actions accordingly.
• Setup Bill of Material and routing for new part numbers in ERP system.
• Perform product validation according to the product design specification and customer requirements.
• Work with vendors to fabricate and test functional prototypes of new products, component changes and design improvements.
• Focus person to liaise with customer for Engineering Change, raises ECN and co-ordinate with internal personnel to ensure smooth implementation.

Requirement

• Min Degree in Mechanical, Manufacturing or relevant
• Min 3 years of experience in mechanical product design with jig & fixture design in manufacturing industry
• Proficiency in Solidworks 3D modelling and AutoCad.
• Familiar with machining and stamping parts fabrication processes.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Company located at Tuas

• Monday – Friday: 8am –5:30pm

• Well Established Oil &Gas Manufacturing Company

• Variable Bonus +Excellent Welfare & Benefits

• TRAINING PROVIDED

Job Scope

• Support Manufacturing Engineers in generating Process Control Routers (PCR) using Microsoft Dynamics 365 Business Central.
• Assist in preparing job-related documents, including Purchase Requisitions, Balloon Drawings, and other engineering documentation.
• Gather, compile, and maintain production and engineering data for reporting and analysis purposes.
• Manage, control, and maintain engineering documents.
• Participate in and support continuous improvement, productivity enhancement, and cost-saving initiatives.
• Ensure assigned activities are carried out with consideration of their impact on the company, customers, and the environment, and take appropriate measures to minimize adverse effects.
• Follow all safe work practices and procedures.
• Comply with all Quality, Health, Safety, and Environmental (QHSE) policies and procedures.
• Perform other duties and assignments as directed by the supervisor or management.

Requirement

• Diploma in Engineering / Business Administration or equivalent
• 0 – 1years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Company located at Tuas

• Monday – Friday: 8am –5:30pm

• Well Established Oil &Gas Manufacturing Company

• Variable Bonus +Excellent Welfare & Benefits

Job Scope

• Support Manufacturing Engineers in generating Process Control Routers (PCR) using Microsoft Dynamics 365 Business Central.
• Assist in preparing job-related documents, including Purchase Requisitions, Balloon Drawings, and other engineering documentation.
• Gather, compile, and maintain production and engineering data for reporting and analysis purposes.
• Manage, control, and maintain engineering documents.
• Participate in and support continuous improvement, productivity enhancement, and cost-saving initiatives.
• Ensure assigned activities are carried out with consideration of their impact on the company, customers, and the environment, and take appropriate measures to minimize adverse effects.
• Follow all safe work practices and procedures.
• Comply with all Quality, Health, Safety, and Environmental (QHSE) policies and procedures.
• Perform other duties and assignments as directed by the supervisor or management.

Requirement

• Diploma in Engineering / Business Administration or equivalent
• 0 – 1years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492