Total 97 maintenance job vacancies in Engineering category in Singapore

Job Description

Responsibilities

• Major Fault Support & Review – Respond to Severity 1/2 incidents within 1 hour, log cases to Huawei TAC, lead troubleshooting, and conduct post event fault reviews.
• Operational Analysis – Deliver monthly reports covering cloud resource capacity, platform health, alarm analysis, and optimization recommendations.
• Risk Check – Perform quarterly in depth health checks (runtime status, capacity, configuration, warnings, version & license management) and provide rectification guidance.
• Basic & Advanced Cloud Service Version Upgrade – Lead upgrade solution design, pre upgrade checks, implementation, verification, and rollback for cloud platform and gPaaS/AI DaaS services
• Issue & Risk Management – Analyse issue trends, track unresolved escalated issues, and proactively identify and mitigate platform stability risks.
• Resource & Capacity Management – Analyse resource usage and provide scaling or reconstruction recommendations.
• Change Implementation – Implement configuration changes (including after hours support up to 8 hours/week as needed), obtain customer authorization, and perform rollback if required.
• Urgent Recovery & Troubleshooting – Assist TAC in emergency fault recovery, common issue resolution, and rapid service restoration.
• Routine PMI & Monitoring – Perform routine product inspections, monitor alarms via ManageOne/eSight, and ensure platform health

Job Requirements:

• Bachelor/Master of computer science engineering or related majors, with over 3 years O&M experience, including hands on work with cloud platforms (public/private cloud) or general IT (networks, OS, databases, middleware, basic IT components).
• Familiar with HCS deployment, tenant O&M processes (backup management, resource inspection, requirement management, risk management, asset management, expense analysis, monitoring & alarming.
• Strong foundational knowledge of datacom principles; familiar with TCP/IP, standard IP networking, and hybrid cloud networking; able to independently resolve basic datacom issues; proficient in physical network technologies and architectures.
• Strong capability to identify and demarcate cloud problems, lead problem closure, and drive backend improvements.
• Excellent customer service awareness and communication skills; able to work with multinational teams
• Attention to detail and strong execution capabilities

Preferred Qualifications:

• Experience maintaining or optimising large scale data centre network services.
• Experience with SDN delivery and maintenance.
• Familiarity with chaos engineering, fault drills, stress tests, and architecture optimisation.
• Experience in multinational team management (at least 2 years).

Apply Link: https://jobs.persolmalaysia.com/detail/39051?apply_id=39051&utm_source=jobstore&utm_medium=sponsored

Contact Email: jiahui.ang@persolapac.com

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

Duties & Responsibilities

• Responsible to preform Preventive Maintenance works as per schedule for Production machines and Equipment.
• Carry out Maintenance activity for supporting facilities as per planning (weekly, monthly, quarterly, etc).
• Record and document of all related maintenance activities reports such as SOP, PM, Calibration report and etc.
• Assist Production Department in machine operation setting where applicable.
• Carry out routine monitoring, inspection, maintenance and repair works as assigned by superior.
• Attend and initiate troubleshooting and repair of any machinery breakdown, report immediately to the superior if face any difficulties in completing jobs.
• To carry out installation of new machine equipment.
• Monitor and supervise all work performed by outside contractors is done properly and high standard.
• Ensure the stock for spare part is sufficient.
• Carry out maintenance task as assigned by the superior and management from time to time.

Requirements

• Candidate must possess at least Certificate / Diploma in mechanical or any relevant field.
• Minimum 1 years working experience preferably in machine maintenance and facilities or equivalent.
• with more than 1 vancancy

Perks & Benefits

• Casual dress code
• Medical insurance

Responsibilities

• Perform troubleshoot, calibration, repair and maintenance of assigned testers and probers platform
• Ensure equipment are in optimum production condition, with minimum downtime and running at yield specified
• Support new product offload to production and perform new machine buyoff / evaluation
• Initiate improvement project or DOE for process or yield improvement
• Maintain spare parts inventory

Requirements

• Degree or Diploma in any Engineering field or equivalent
• Prior experience in troubleshooting equipment, maintenance, and repair
• Experience in manufacturing environment is an advantage
• Analytical, problem-solver with good verbal and written communication skills
• Entry level candidates are welcome to apply

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned testers and probers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible to perform prober preventive maintenance and calibration.

Requirements

• Diploma / NITEC in Electronic / Electrical / Mechanical or any Engineering field.
• Prior experience in semiconductor or manufacturing environment is advantageous.
• Possesses strong analytical, problem-solving and communication skills.
• Able to commit to 12-hr day shift.
• Entry level candidates welcome to apply.

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Brani or at Harbor Front MRT

Industry: Petrochemical
MNC Environment
Exciting career opportunity

Responsibilities:

• Plan, schedule, and follow up on daily maintenance activities with contractors and internal teams to ensure timely and effective execution. Record daily outcomes and prepare schedules for upcoming work.
• Investigate and resolve faults or failures in Equipment’s supporting both corrective and preventive actions to ensure reliable operation.
• Liaise with in-house and external contractors for day-to-day services and major shutdown maintenance activities, including work planning, site coordination, and communication with production teams.
• Assist in developing and enhancing long-term maintenance strategies to improve equipment reliability and prevent recurrence of issues, in collaboration with production and contractors.
• Monitor maintenance spare parts inventory, including receiving and issuing updates, and assist with purchase requests for tools, spare parts, and maintenance services.
• Ensure accurate and timely completion of documentation such as calibration records, maintenance files, work orders, and compliance with ISO standards and internal SOPs.
• Uphold Company’s EHS policies, support safety and environmental management systems (e.g., ISO 9001, ISO 14001, OHSAS 18001), act responsibly for workplace safety, and contribute to minimizing Major Accident Hazards (MAHs) to ALARP levels.

Requirements:

• Diploma in Mechanical Engineering or the equivalent.
• Min 5 years’ experience as Maintenance supervisor/Engineer in a chemical plant.
• Must have knowledge and hand-on troubleshooting experience on Chemical Plant equipment’s.
• Basic understanding of Maintenance technology, Mechanical equipment’s & manufacturing process.
• Good team player and communication skills with right attitude towards work progress.

Job ID: X966Y4RY

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to carlo@peopleprofilers.com

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747   

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Job Description

• Perform Store receiving, verification of goods receive/Issuing out and storing of goods.
• Perform Store administrative work
• Manage storeroom inventory
• Provide technical support when necessary.
• Perform basic repair, inspection, reassembly, refitting, and adjusting products as required.
• Maintain work area clean, safe, and orderly.
• Servicing & repair landscape equipment / vehicles
• Service / Maintenance/ Repair of motor vehicles and equipment including engine checks, chassis checks, battery checks and identify mechanical defects or faults and replace defective or worn parts.
• Carry out component overhaul
• Carry out fault diagnosis
• Fundamental electrical knowledge to troubleshoot electrical systems and usuage of Engine Diagnostic Equipment to troubleshoot “Check Engine Light’ to identify electrical faults, perform repairs and replace defective parts.
• Provide roadside assistance to troubleshoot, identify and rectify faults on spot.
• Ensure compliance to health and safety polices and procedures in the course of work inside workshop area at times.
• Maintain the cleanliness and neatness of the workshop area thru good housekeeping.
• To perform any other ad hoc tasks assigned.

Requirements:

• Relevant working experience highly welcomed
• Positive attitude, willingness to learn and good team player
• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• At least 1 Year of working experience in the related field is required for this position.
• Possess valid Class 2B/ Class 3 and above will be a bonus

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting daily equipment downtime.
• Responsible for daily house keeping and any other responsibilities as assigned.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical/ Mechatronics Engineering or equivalent.
• Specialized knowledge of equipment, testers, handlers, etc is preferred.
• Possess Trouble shooting skills on equipment maintenance and repair.
• Possess strong analysis and good teamwork.
• Good communication and presentation skills.
• Able to commit to either 12-hr permanent day / night shift.

Job Responsibilities:

• Ability to complete the repair scheme in accordance with the requirements & instructions of Rolls-Royce Engine Manuals (e.g. SPM - Standard Practices Manual, SB – Service Bulletin) & TV (Technical Variance)

• Operation of special tools for the replacement of shank nuts on aero engine components

• Operation of specific tooling for installation, inspection & torque check during the replacement of wirethread inserts on aero engine components

• Operation of precision jig and fixtures for the replacement of engine spares (studs, pins, pads, washers, liners, bushings etc.) on aero engine components

• Operation of pneumatic tools (die grinders & air drills etc.) for repair and precision inspection instrument for quality control in minor damage repair on aero engine components

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Chemical storage, Hand Tools storage)

Requirements:

• Minimum 3 years in aero engine components/parts hand fitter/mechanic experience

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to operate High Pressure Waterjet machine to remove metal sprays coatings from aero engine components in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Setting up, operating, and performing routine machine maintenance of High Pressure Waterjet Machine

• Familiar in setting and control of different parameters for the validation of process

• Familiar in using different precision measuring instruments for dimensional inspection

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture and Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of High Pressure Waterjet machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Responsible for the programming, set-up, and operation of coordinate measuring machines (CMMs) to ensure accurate measurement of aero engine components in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Apply advanced logic and methodologies in the development and optimization of CMM programs (Modus is preferable)

• Effectively identify, analyze, and resolve programming-related issues that arise

• Perform routine maintenance and calibration checks on CMM as required

• Complete inspection documentation and report discrepancies to ensure accuracy and compliance with regulations and quality standards

• Adhere to all safety regulations and maintain a clean, tidy and organized workspace

Requirements:

• Minimum 3 years relevant working experience in aviation industry

• Minimum 2 years experience working as a CMM operator

• Expertise in CMM programming and use of relevant software applications

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Demonstrate proficiency in interpreting engineering drawings, including comprehensive understanding of Geometric Dimensioning and Tolerancing (GD&T) symbols

• Good understanding of CMM technical specifications

• Good command of written English and engineering analytical skill

• Ability to troubleshoot and provide solutions to problems

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out repair and modification on aero engine components, manufacture the aero engine spares in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Preparing CNC program and conducting first article inspections to ensure quality

• Executing programs to repair the aero engine components or fabricate the aero engine spares according to the engineering drawing of Rolls-Royce Engine Manuals

• Setting up, operating, and maintaining of 5-axis CNC Milling machine

• Familiar in usingdifferent measuring equipment for dimensional inspection

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage & Cutting tools storage)

Requirements:

• Minimum 3 years relevant working experience in programming and operation of 5-axis CNC Milling Machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Able to compose CNC programs on Faunc, Siemens, Heidenhain or other systems for machining operation

• Proficient in SolidWorks or Mastercam is an advantage

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to carry out Superfinishing (also known as Vibropolishing or Vibrobarrelling) of aero engine blade and vane airfoils using non-metallic media to produce a fine surface finish in accordance with the requirements & instructions of Rolls-Royce Engine Manuals

• Ability to make-up and control of Superfinishing Media

• Setting up and operating the Vibro-Polishing Machine

• Monitoring the machining cycle to ensure quality

• Familiar in using different precision measuring equipment for chordal width, trailing edge thickness measurement

• Familiar in checking the surface finish using suitable surface finish measuring machine

• Performing quality inspections of finished products

• Conducting routine machine maintenance

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Vibro-Polishing machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to conduct Shot/Glass Bead Peening tasks in accordance with National Aerospace and Defense Contractors Accreditation Program (NADCAP) requirements & Rolls-Royce instructions

• Ability to make-up and media control for Shot, Glass Bead Peening

• Executing programs to carry out shot/glass bead peening on the aero engine components according to the Repair Scheme requirements

• Setting up, operating, and conducting routine machine maintenance of Shot/Glass Bead Peening Machine

• Performing inspections of peened surfaces for uniform coverage according to the Repair Scheme requirements

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in Shot/Glass Bead Peening machine

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Job Responsibilities:

• Ability to conduct automatic circumferential welding build up worn or damaged areas on the aero engine components in according with the requirements & instructions of Rolls-Royce Engine Manuals

• Proper preparation prior to welding

• Setting up, operating, and conducting routine machine maintenance of High Precision 3-5 axes Dabber Welding System

• Performing inspections of welded area according to the Repair Scheme requirements

• Troubleshooting any issues that arise

• Understand and strict adherence to Material Safety Data Sheet (MSDS)

• Health & Safety practices (E.g. Personnel Protection Equipment, Fixture & Tooling storage)

Requirements:

• Minimum 3 years relevant working experience in operation of Dabber Welding System

• Diploma or above in Mechanical Engineering, Aviation Engineering or related disciplines

• Able to interpret engineering drawings

• Good command of written English and engineering analytical skill

• Willing to take day and night roster shifts

We regret that only shortlisted candidates would be notified.

EA License No: 08C2822

Bizhub Asia Pte Ltd