Total 890 engineering job vacancies in Engineering category in Singapore

About our group:

Media new product launch is to provide technical solutions to new product qualification, product yield, quality and reliability through developing new process and metrology. The team also needs to work closely with media R&D group and drive design center to continue optimize media process in order to meet product electrical recording performance as well as mechanical, tribology, manufacturability. Internally, the team need to work with different functional groups to deliver new mag design in very dynamic and challenging environment. 

About the role - you will:

Reporting to the Engineering Director, the incumbent will:

• Develop on HAMR sputter process to improve media ADC and mechanical performance to meet new product timeline.
• Design of experiment to understand the process window/margin.
• Good understanding of recording physics.
• Work with cross functional team on new alloys/process related defect issues.
• Transfer new product process into mass production and continue improve process to meet customer requirement.
• Technical lead of sputter projects.

About you:

Key characteristics defining outstanding candidates:

• Good understanding on magnetic recording materials, process and thin film technology.
• Teamwork and self-motivated.
• Fast learning capability.
• Strong communication and technical leadership skills.
• Ability to drive technical innovation into rapid product solutions.
• Flexibility and excellent time and task management capabilities.

Your experience includes:

• Master or Ph.D degree in Material science, magnetic recording physics or related engineering disciplines.
• Knowledge and skills in any of these areas – Material science, HAMR knowledge, thin film sputter process.
• R&D in magnetic recording media process, including process DOE, magnetic characterization tools, and data analysis techniques are all skills that will be beneficial in this role.
• Proficient in English speaking and writing.

As a Senior Electrical Engineer, you will lead the design and standardization of electrical infrastructure for next-generation data centres. You will own the development of Reference Designs for hyperscale and retail product tracks, ensuring scalability, cost efficiency, and compliance with global standards.

This role is pivotal in shaping advanced electrical infrastructure solutions that enable hyperscale growth, high-density and liquid-cooled deployments, and future-ready data center designs—while ensuring uncompromising reliability, efficiency, and sustainability, and leading continuous improvement initiatives in partnership with Operations and Construction teams.

Key responsibilities

• Develop and maintain electrical Reference Designs for hyperscale and retail data center product offerings.
• Design resilient, scalable electrical distribution systems and substation solutions for high-density environments.
• Ensure compliance with regional electrical codes and internal standards.
• Conduct engineering analysis, feasibility studies, and value engineering for cost and performance optimization.
• Collaborate with Design Delivery & Construction teams to localize designs and ensure constructability.
• Partner with Operations to identify improvement opportunities and implement design enhancements for reliability and maintainability.
• Review and approve critical equipment submittals, including vendor FATs and acceptance tests.
• Partner with suppliers and manufacturers to specify and qualify electrical equipment.
• Conduct root cause analysis and implement corrective actions for electrical system issues.
• Drive innovation and R&D for emerging technologies (e.g., liquid cooling integration, advanced monitoring).
• Produce clear technical documentation: design specifications, schematics, and white papers.
• Lead technical forums and provide subject matter expertise across regions.
• Actively champion and implement policies and procedures for occupational health & safety in the workplace, information security management, environmental management systems; incident management; and comply with all legal regulatory requirements of the organization

Thesuccessful candidate:

·       Bachelor’s degree in Electrical Engineering or related discipline

·      10+ years of experience in heavy industrial or commercial electrical design, including 5+ years in mission-critical facilities

·      Strong understanding of regional electrical codes (IEC, NEC, CCC, etc.)

·      In-depth knowledge of critical data center electrical systems, including:

-       Medium-voltage distribution systems.

-       UPS systems, diesel generators, electrical switchgear, PDUs, VFDs, and ATS/STS.

-       High voltage substations

·      Experience with controls systems and integration

·      Proven ability to research and implement new designs and technologies from concept through deployment

·      Experience managing supplier relationships and conducting factory acceptance tests

·      Proficiency with modelling software tools (e.g., AutoCAD, Revit, BIM)

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As a Senior Manufacturing Engineer, you’ll play a critical role in turning breakthrough designs into real-world manufacturing solutions. From concept to customer delivery, you’ll drive new product industrialization by working cross-functionally to optimize for quality, cost, and lead time. You’ll be a strategic partner to both Global Operations and our Business Units, influencing design, improving processes, and supporting the full product lifecycle.

What you will be working on

• Provide first line engineering support in resolving daily operation issues in semiconductor equipment manufacturing, through collaboration with a team of multidisciplined manufacturing engineers, manufacturing supervisors and technicians.
• Achieve daily targets on product delivery to global customers in alignment with manufacturing engineering strategies, production schedules, quality and safety standards.
• Design and develop cost-effective testing methods with innovations for systems and equipment throughout product development and manufacturing in meeting manufacturing efficiency and customer quality.
• Prepare test and diagnostic programs according to product requirements, refine detailed test specifications, develop detailed procedures.
• Provide holistic technical solutions for highly complex problems from the suppliers, contract manufacturing, and internal manufacturing by liaising with cross functional teams in GOPS and Business Units (BU).
• Perform systematic troubleshooting and root cause analysis of manufacturing issues and deviations, provide immediate containment actions, and pursue long term corrective solutions.
• Partner with cross functional teams in Global Operations (Manufacturing, Production Planning, Procurement, and Quality Engineering), organize and lead internal and external review meetings, ensuring alignment and progress with focus on manufacturing processes, cycle time, assembly sequence, and quality.
• Lead the execution of continuous improvement projects on quality, cost, capacity, and efficiency enhancement with cross functional teams in GOPS and BU.

What we are looking for

• Bachelor’s degree in Electrical/Electronic Engineering, Automation engineering or equivalent.
• Minimum 8 years of experience in a manufacturing or engineering environment
• Minimum 5 years of relevant engineering experience in semiconductor capital equipment industry.
• Hands-on experience in electrical testing and troubleshooting.
• Working knowledge of testing methodology, C#, Python, or other scripting languages.
• Proven track record of managing technical projects to completion while accomplishing objectives and influencing cross-functional teams
• Experience with control systems utilized in testing automation, serial communication protocols, TwinCAT PLC, Device Net, Ethercat, RS 485, RS 232, etc.
• Proficient in operational excellence tools such as FMEA, 8D, SPC, DMAIC, GR&R, and Six Sigma

What sets you apart

• Strong cross-functional communication and stakeholder engagement skills
• Experience in project management for multiple NPI programs
• Background in supplier development or contract manufacturing environments
• Exposure to manufacturing digitization or data-driven process improvement

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

ALTEN Group is a world leader in Engineering and Technology consulting services providing outsourced Engineering, R&D, and IT Services for different industries such as Transportation, Defence, Energy and Security with 55,000 engineers in nearly 35 countries. ANOTECH is the subsidiary of the Group delivering ALTEN's Engineering Services in Singapore.

As an Engineering Quality Leader, you will ensure the implementation of processes, practices and specific tools, to make sure quality on product development is in line with the tailored processes as well as the technical requirements and international regulations (ISO, ASPICE, etc.) for the embedded projects.

Responsibilities:

• Manage compliance to Quality Assurance and Customer requirements and their flow down to the Engineering Team

• Define and apply the Quality Management System and relevant Quality Plan specific for the development project (HW and SW)

• Assure the quality of solutions in collaboration with Solution or Software Engineering Managers by participation to FAT, or inspection

• Assure that Anomalies, Non-conformities and Alerts are followed and closed through the managed Non-Conformities process

• Support the Certifications (ISO 9001, CMMI, ASPICE and ACSMS for process adherence)

• Collaborate with the Solution or Software Engineering Manager to establish the Certificate of Conformity

• Exercise Alert Duty and Veto Right in case of non-resolution of problems and escalate it to the correspondent management organization, manage and capitalize on alerts and vetoes

• Complies with auditing plan and conduct audits to the projects then follow up the Non-Conformity raised in the Audit until closure out

• Ensure that all processes are well known to the Engineering Team and its stakeholders by providing and deploying Engineering and

• Project process training

• Collect, maintain and monitor the KPIs for technical debt for Engineering Teams

• Facilitate the Postmortem session for all projects and monitor the actions of improvements until its closure

• Ensure that the solution developed (HW and SW) is complying with both customer and company requirements with the required and expected level of Quality

• Support the development teams in identifying and resolving problems, assuring that the relevant processes, practices and applicable standards and regulations have been followed

• Analyze the data resulting from audits, return and customer complaints, alert and veto right, to prevent the risks

• Approve or make sure of the formal approval of the conformity of products and to be in charge of the follow-up of the complaints from the customers

• Contribute as required to project reviews supplying feedback by using the quality advices

• Support and verify tailoring activities of Thales practices and their result in the relevant existing documentation

• Support and verify the process implementation applicable at development level (HW and SW) with internal audits and/or follow-up

• Support the ISO 9001 and ASPICE certifications as well as the ACSMS adherence

Essential Requirements:

• Tertiary qualification in Engineering or technical disciplines or equivalent (Electronic is preferential)

• At least 5 years of Quality Assurance activities or senior experience in similar positions.

• Experience in Quality in Engineering/Development teams (preferable within Electronics/Telecommunication context)

• Process Analysis, Improvement and Deployment.

• Knowledge of Quality Plan/ Quality Inspection & Test Plan

• Knowledge of Quality Standards like ISO 9001, CMMI, ASPICE and ACSMS

• Knowledge of AGILE at SCALE (SW, HW, SYSTEM Integration)

• Strong time management, organizational, interpersonal and communication skills

• Result & customer oriented, critical thinking, flexibility and high capacity to work within multicultural teams

• Ability to speak fluently in English

• Knowledge on IT and Engineering tools like Microsoft Office, Jira, Confluence, etc.

• It will be considered a plus if you possess the following knowledge:

Ø IVVQ Strategy

Ø Standardization (Configuration Management mindset)

Ø Project Management

About our group:

The team is responsible for Drive Backend Assembly processes, including monitoring, controlling, maintaining, and improving product performance. This role applies engineering principles—such as Six Sigma and Lean—together with strong skills in data analysis, problem‑solving, and solution implementation to achieve performance metrics aligned with company goals.

About the role - you will:

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets.
• Support product ID label buyoff to ensure compliance with product specifications and standards.
• Monitor production yield to detect any excursions, conduct process mapping, implement immediate containment (stop bleeding), establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers. Escalate issues appropriately per PMP requirements.
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams.
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations.
• Collaborate closely with engineers to achieve aggressive goals while upholding high-quality standards.
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner.
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs).

About you:

• Diploma in Engineering and related disciplines.
• Able to perform effectively under pressure, meet deadlines, and maintain a positive and professional attitude.
• Enjoys taking on challenging assignments and demonstrates strong resilience and adaptability.
• Open‑minded with a consistently positive work attitude.
• Strong data querying and analytical capabilities.
• Proficient in English with strong verbal and written communication skills.

Your experience includes:

• Experience in the manufacturing process is preferable.
• Process setup, buyoff, process mapping, and control.
• Failure analysis experience is preferable.
• Strong verbal and written communication.

About Group:

We are a dynamic process team to provide sputter engineering support to hard disk media production with the objective of ensuring compliance and conformance to process procedures.

About the Role:

• Provide engineering support to production line by ensuring process flow, specification, procedure and documentation
• Monitor any variables within the process and make the adjustments when required
• Quick and effective diagnosis and troubleshooting of routine or minor problems
• Perform process buy-off after equipment preventive maintenance or breaks down
• Document routine manufacturing processes and report data for shift duty pass-down
• Conduct or assist the process engineer in carrying out experiments with the objectives of process improvement
• Continuous improvement on OEE
• Training and certification for MS and new EA personnel
• Assist in Audit preparation

About you:

• Self-motivated and positive working attitude.
• Team player with good problem-solving skill.
• Willing to work in clean room environment.
• Willing to work on 12hr (7.30pm to 7.45am) nightshift pattern

Your Experience Includes:

• Relevant experience in the manufacturing industry will be an added advantage
• Possess of Sputter knowledge will be an added advantage

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As a Principal / Senior Engineer, Electrical Engineering at ASM, you will act as a technical lead for electrical systems within advanced semiconductor equipment. You will drive system-level design decisions, ensuring robust architecture, seamless integration, and high-performance delivery. By combining deep technical expertise with strong ownership, you will guide the development of complex systems from concept through production while influencing cross-functional engineering outcomes.

What you will be working on

• Lead the design and development of electrical systems and sub-assemblies, setting technical direction and ensuring alignment with product architecture
• Lead fabrication and test of electrical test structures (ex. MOS capacitors, MIM capacitors, FETs) for semiconductor logic and memory applications
• Own system-level integration, ensuring electrical, mechanical, and control elements work cohesively to meet performance, safety, and reliability targets
• Define and validate digital and analog I/O architectures, enabling flexible, customer-specific configurations
• Drive technical decision-making across new product development, capital projects, and system improvements
• Review and approve engineering changes, ensuring technical integrity, risk mitigation, and adherence to timelines
• Act as a key contributor in design reviews, providing expert guidance and ensuring readiness for production release
• Define and oversee system validation strategies, including hardware testing, instrumentation, and performance verification
• Analyze, understand and interpret electrical test data (ex. CV, IV, Dit) to guide process development and integration of ASM's products such as ALD films
• Evaluate feasibility of new concepts and technologies, solving complex system-level challenges with a structured and innovative approach
• Influence and collaborate with global cross-functional teams, acting as the electrical domain expert
• Mentor and guide junior engineers, elevating technical capability within the team
• Drive high-quality technical documentation, reporting standards, and stakeholder alignment

What we are looking for

• Master’s or PhD in Electrical and Electronics Engineering
• Minimum 5 years of experience in system engineering within semiconductor equipment manufacturing
• Strong expertise in electrical hardware design, system architecture, and integration (e.g., reactors, plasma sources, or similar systems)
• Proven ability to lead technical problem-solving and make system-level design decisions
• Proficiency in AutoCAD and data analysis tools such as JMP
• Hands-on experience in hardware testing, instrumentation, and system validation
• Ability to operate effectively in a fast-paced, global engineering environment
• Strong communication skills in English, with the ability to influence technical discussions

What sets you apart

• Experience acting as a technical lead or subject matter expert on complex engineering projects
• Strong understanding of semiconductor processes and equipment architecture
• Experience defining or improving system validation strategies and test methodologies
• Familiarity with data analysis or scripting tools (e.g., Python)
• Proven track record of driving cost reduction, reliability improvements, or product innovation
• Experience working across regions or with international engineering teams
• Proactive, ownership-driven mindset with the ability to influence without formal authority

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

POSITIONGENERAL DUTIES AND TASKS :

Must have

·      Production Support / SRE (L2 Operations)

o  12+years Strong experience in incident management, platform stability, anddistributed systems support

·      Linux& Scripting Expertise

o  Hands-on with Linux commands + shell/Python/ scripting

·      Monitoring& Observability Tools

o  Experience with Dynatrace, Splunk, alerting, dashboards

·      Java& Application Troubleshooting

o  Working knowledge of Java (1.8+) and end-to-end issue debugging

o  Strong expertise in SQL and database troubleshooting (query optimization, performance tuning, and data analysis for incident resolution)

·      Programming Languages

o  Exposure to C, C++, Go, Perl, Ruby 

·      Strong experience in incident management and distributed systems support , excellent troubleshooting and problem-solving skills & automation of operational tasks

·      Support onboarding and guidance of junior team members

Good-to-Have Skills

·      Experience with performance testing tools (e.g., Blaze Meter)

·      Exposure to payments or real-time transaction systems

·      Understanding of DevOps and automation practices

 Soft Skills

·      Strong communication and stakeholder management skills.

Engineering consultants

provide expert technical advice, design solutions, and project management across various industries

. They act as objective problem-solvers, helping clients—ranging from developers to government agencies—translate technical requirements into actionable, compliant, and cost-effective infrastructure or systems

The specific responsibilities of an engineering consultant are generally divided into four core project phases:

1. Planning & Feasibility

• Client Consultation: Meet with clients to understand their technical needs, goals, and operational constraints.
• Site Assessments & Research: Conduct primary/secondary market research, technical assessments, and feasibility studies.
• Cost Estimation: Develop initial budgets, estimate labor/operational costs, and forecast project timelines.

2. Design & Engineering

• System Design: Translate client requirements into tangible designs, new system infrastructures, or equipment specifications.
• Documentation: Prepare detailed engineering reports, concept drawings, and technical specifications.
• Regulatory Compliance: Ensure all designs strictly adhere to local authority codes, statutory regulations (e.g., BCA, SCDF, NEA standards in Singapore), and safety standards. [1, 2, 3]

3. Project & Tender Management

• Tender Evaluation: Prepare and evaluate tender documents to help clients select the most suitable contractors.
• Vendor Coordination: Manage supply chains, oversee purchasing logistics, and coordinate with contractors and external consultants.
• Project Oversight: Manage project progression to ensure it adheres to the scope, budget, and deadlines.

4. Implementation, Testing & Commissioning

• Site Supervision: Supervise construction or on-site works, and review contractor submissions or temporary works to ensure quality control.
• Troubleshooting & Audits: Conduct routine audits, identify/resolve technical errors, and implement mitigation measures.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Engineering Assistant
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Plan and manage production processes, equipment, and procedures.
• Design production workflows and provide clear work instructions.
• Ensure products meet quality and specification standards.
• Use tools like time study, SPC, FMEA, and others to improve efficiency.
• Propose solutions to prevent product quality issues.
• Design and verify jigs and fixtures for production.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• Minimum NTC 2/3 in Precision Engineering (with relevant experience).
• Basic knowledge of CNC machining (Milling or Turning),
• Familiar with CAD/CAM software (AutoCAD and Mastercam),
• Proficient in Microsoft Word, Excel, Outlook.
• Individuals without experience are encouraged to apply, training is provided.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78154 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Electrical Engineer / Assistant Engineer

Working days: Mon - Fri

Working hours: 8:15am - 5:30pm (OT is required)

Location: Joo Koon (Transport from Lakeside / CCK / Joo Koon MRT)

Salary: $2500 - $4000 + OT + AWS + Bonus

Summary

The engineer is responsible for supporting motor & generator services, transformer services and switchgear services. 

 Requirements

• Nitec / Diploma in Electrical Engineering 

• Class 3 driving license is preferred

Primary Responsibilities

• Take charge of maintenance, troubleshooting, repair, commissioning and replacement of machinery equipment and systems such as chillers, motors, switchgears, generators and transformers.

• Carry out testing for all types of protection and maintenance.

• Develop and maintain relations with supervisors, assistant supervisors and other department on engineering concerns.

• Identify and solve engineering problems as needed.

• Ensure works are done timely.

• Ensure all safety aspects of the team.

• Mentor and train up technicians.
  

Chan Kai Wen Reg R23114137
THE SUPREME HR ADVISORY PTE LTD
EA No: 14C7279

Responsibilities

·      Review design package and prepare/ approve shop drawing of RC structural works and temporary works (strut, waler, etc.)

·      Coordination of structural design works with design-relevant counter parties (i.e. civil consultant, accredited checker, and Arch/SWC consultant) and construction team, as well as authorities if necessary

·      Design of temporary works (e.g. scaffolding, false work, form work etc.) related to structural design

·      Lead/ Assist project department in solving design related matters

·      Manage and resolve production, quality, design, engineering and scheduling issue

·      Other duties as required

Requirements

·      Min. 5 yrs engineering experience in civil &structural works

·       Experience in infrastructure projects is mandatory (Land Transport Project preferrable)

·      Site experience in underground roadway project is preferred

·      Design management with consultancy on structural engineering is highly advantageous

·      Proficient knowledge of structural design, analysis software such as STADD and AutoCAD (or Microstation)

·      Good knowledge of authorities’ requirement

To findout more about this opportunity, please contact Lionel Liew at lionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd  |   EA Licence: 11C3793|   EA Personnel: Lionel Liew   |  Registration No: R1330693

• Company located at Tuas

• Monday – Friday: 8am –5:30pm

• Well Established Oil &Gas Manufacturing Company

• Variable Bonus +Excellent Welfare & Benefits

• TRAINING PROVIDED

Job Scope

• Support Manufacturing Engineers in generating Process Control Routers (PCR) using Microsoft Dynamics 365 Business Central.
• Assist in preparing job-related documents, including Purchase Requisitions, Balloon Drawings, and other engineering documentation.
• Gather, compile, and maintain production and engineering data for reporting and analysis purposes.
• Manage, control, and maintain engineering documents.
• Participate in and support continuous improvement, productivity enhancement, and cost-saving initiatives.
• Ensure assigned activities are carried out with consideration of their impact on the company, customers, and the environment, and take appropriate measures to minimize adverse effects.
• Follow all safe work practices and procedures.
• Comply with all Quality, Health, Safety, and Environmental (QHSE) policies and procedures.
• Perform other duties and assignments as directed by the supervisor or management.

Requirement

• Diploma in Engineering / Business Administration or equivalent
• 0 – 1years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $2800 - $3500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas / On-site
• Working days: Monday to Friday (8am to 5pm), Saturday (8am to 12pm)

Job Responsibilities:

• Service, repair, install, load testing on crane and hoists system
• Assist in the setup and commissioning of overhead cranes, hoists, and related mechanical systems
• Conduct routine maintenance and servicing of mechanical equipment to ensure optimal performance
• Diagnose mechanical issues and perform necessary repairs to minimize downtime
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum GCE O level with minimum 1-2 years of relevant experience
• Possess electrical knowledge/experience
• Possess with Singapore driving license
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492