Total 303 Full-time Junior Executive system technician job vacancies

JOB DESCRIPTION:

* Prepare shell drawing once received Architect and Structure drawings from Client.

* Liaise with the client about shell drawing before proceeding with Aluminium Formwork.

* Attend site meetings, Consultant meetings if requested and report regularly the progress to HOD.

* Communicating with architects and engineers, and incorporating knowledge gained into drawings.

* Identifying and communicating potential design errors to the rest of the team.

* Preparing, reviewing and redrafting alongside the engineering team.

* Preparing Setting Out Drawings and Material List to Client.

REQUIREMENT:

* Possess at least a Diploma / Degree in Architecture or Structural Engineering.

* Minimum 2 Years of working experience in Architectural and Structural drawings.

* Proficiency in software (AutoCad, Revit, etc) are added advantage.

* Ability to work well in a team and independently.

* Ability for communication with difference parties.

* Good Attendance and responsibilities in duty.

* Willing to learn, hardworking, self-disciplined, and able to complete task within the timeline given.

* Fresh graduates are also encouraged to apply.

Responsibilities:

• Performs set-up/changeovers, takes corrective action to eliminate production defects and reduce in-process losses with minimal support from superior.
• Performs machine preventive maintenance and prepares machines for line clearances.
• Troubleshoot equipment and coordinate corrective actions to reduce or eliminate defects, rejects, or equipment downtime with minimal support from Superior.
• Perform all assigned duties according to departmental SOP’s.
• Remain current on proper procedures by reviewing current, revised, and new SOP’s relating to the job and to the department.
• Ability to use, clean, and store tools and other devices required for the performance of the job in a manner which prevents damage to the tools and / or equipment.
• Maintain a clean and organized work area during and at the end of each shift.
• Effective and efficient operation of manual and automated equipment.
• Follow the related legal requirement in working environment practice such as ISO requirement, Safety requirement etc. based on the Superior decision.
• Responsible to Control related Confidential item and make sure the material is not leak to other parties and follow the implementation of the preventive action.
• Attend the informal or formal inhouse or external training as to increase the awareness of the necessary training scope which relevant to the work base on Superior plan.

Competencies:

• Able to use precision measurement device and accurately measure within 0.5μm.
• Ability to multi-task and have the Hands-On skill.
• Excellent hand-eye coordination and manual dexterity and able to read technical drawing.
• Ability to work any shift (up to 12-hours) as required dependent on business needs.
• Physically able to continuously stand and walk.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities
• Yearly performance based increament.

Job Description:

We are looking for a responsible and detail-oriented Admin Executive to support our daily admin operations, SQL system records, invoicing process, and operation coordination.

This role is responsible for ensuring all order, delivery, invoice, payment, and receipt records are entered accurately and supported by proper documents.

The candidate must be able to follow company procedures carefully and work with the admin, sales, warehouse, and delivery teams. This is an execution and support role.

Key Responsibilities:

• Enter and update customer, order, delivery, invoice, payment, and receipt records in SQL system.
• Prepare and check invoice information based on valid supporting documents.
• Ensure invoice details such as customer name, item, quantity, price, document reference, and payment terms are accurate.
• Support daily admin operation, including document preparation, filing, and record updates.
• Assist with DO / RO / invoice document checking and follow-up.
• Coordinate with internal teams on order status, delivery records, POD, and stock movement documents.
• Follow up on missing or incomplete documents with the relevant person.
• Maintain proper filing of quotation, DO, RO, invoice, delivery, payment, and receipt documents.
• Report any missing, incorrect, or mismatched information to the reporting manager.
• Prepare simple daily or weekly admin summaries when required.
• Follow company document flow and avoid unauthorised manual changes.

Key Requirements:

● Minimum 1–2 years of experience in admin, invoicing, sales support, operations support, or related role.

● Experience using SQL system, accounting software, ERP system, inventory system, or similar business system.

● Able to handle invoices, delivery orders, customer orders, and related sales documents.

● Good attention to detail, especially numbers, item codes, quantities, pricing, and document references.

● Basic understanding of sales document flow such as quotation, DO, invoice, delivery, payment, and receipt.

● Basic Microsoft Excel / Google Sheets skills.

● Able to communicate clearly with admin, sales, warehouse, and delivery teams.

● Responsible, organised, and able to follow fixed procedures.

● Able to work carefully without making unauthorised changes or shortcuts.

● Able to flag and report incomplete or unclear information before proceeding.

Preferred Requirements :

● Experience in FMCG, distribution, trading, logistics, warehouse, or wholesale industry.

● Familiar with SQL accounting / inventory system.

● Experience checking DO, RO, invoice, POD, payment records, or stock movement documents.

● Able to prepare simple admin reports or summaries.

● Able to work in a process-driven environment.

Working Style We Are Looking For

● Careful with details

● Stable and responsible

● Good follow-up attitude

● Willing to follow system and procedure

● Comfortable working with documents and numbers

● Able to ask the right person when information is incomplete

● Does not make unauthorised decisions or manual changes

Perks & Benefits

• Nearby public transport
• Central location
• Flexible working hours
• Casual dress code
• Personal leave
• Sabbatical leave

Huraian Kerja:

Kami sedang mencari Eksekutif Pentadbiran yang bertanggungjawab dan berorientasikan perincian untuk menyokong operasi pentadbir harian kami, rekod sistem SQL, proses invois dan penyelarasan operasi.

Peranan ini bertanggungjawab untuk memastikan semua rekod pesanan, penghantaran, invois, pembayaran dan resit dimasukkan dengan tepat dan disokong oleh dokumen yang betul.

Calon mesti dapat mengikuti prosedur syarikat dengan teliti dan bekerjasama dengan pasukan pentadbir, jualan, gudang dan penghantaran. Ini adalah peranan pelaksanaan dan sokongan.

Tanggungjawab Utama:

• Masukkan dan kemas kini rekod pelanggan, pesanan, penghantaran, invois, pembayaran dan resit dalam sistem SQL.
• Sediakan dan semak maklumat invois berdasarkan dokumen sokongan yang sah.
• Pastikan butiran invois seperti nama pelanggan, barang, kuantiti, harga, rujukan dokumen dan terma pembayaran adalah tepat.
• Menyokong operasi pentadbiran harian, termasuk penyediaan dokumen, pemfailan dan kemas kini rekod.
• Membantu semakan dokumen DO / RO / invois dan tindakan susulan.
• Menyelaras dengan pasukan dalaman mengenai status pesanan, rekod penghantaran, POD dan dokumen pergerakan stok.
• Susulan dokumen yang hilang atau tidak lengkap dengan orang yang berkaitan.
• Mengekalkan pemfailan dokumen sebut harga, DO, RO, invois, penghantaran, pembayaran dan resit yang betul.
• Laporkan sebarang maklumat yang hilang, salah atau tidak sepadan kepada pengurus pelaporan.
• Sediakan ringkasan pentadbiran harian atau mingguan yang mudah apabila diperlukan.
• Ikuti aliran dokumen syarikat dan elakkan perubahan manual yang tidak dibenarkan.

Keperluan Utama:

● Minimum 1–2 tahun pengalaman dalam pentadbiran, invois, sokongan jualan, sokongan operasi atau peranan berkaitan.

● Pengalaman menggunakan sistem SQL, perisian perakaunan, sistem ERP, sistem inventori atau sistem perniagaan yang serupa.

● Mampu mengendalikan invois, pesanan penghantaran, pesanan pelanggan dan dokumen jualan yang berkaitan.

● Memberi perhatian yang baik terhadap perincian, terutamanya nombor, kod item, kuantiti, harga dan rujukan dokumen.

● Pemahaman asas tentang aliran dokumen jualan seperti sebut harga, DO, invois, penghantaran, pembayaran dan resit.

● Kemahiran asas Microsoft Excel / Helaian Google.

● Mampu berkomunikasi dengan jelas dengan pasukan pentadbir, jualan, gudang dan penghantaran.

● Bertanggungjawab, teratur dan mampu mematuhi prosedur yang ditetapkan.

● Mampu bekerja dengan teliti tanpa membuat perubahan atau jalan pintas yang tidak dibenarkan.

● Mampu menanda dan melaporkan maklumat yang tidak lengkap atau tidak jelas sebelum meneruskan.

Keperluan Pilihan:

● Pengalaman dalam industri FMCG, pengedaran, perdagangan, logistik, gudang atau borong.

● Mahir dengan sistem perakaunan/inventori SQL.

● Pengalaman menyemak DO, RO, invois, POD, rekod pembayaran atau dokumen pergerakan stok.

● Mampu menyediakan laporan atau ringkasan pentadbiran yang mudah.

● Mampu bekerja dalam persekitaran yang didorong oleh proses.

Gaya Kerja Yang Kami Cari

● Berhati-hati dengan perincian

● Stabil dan bertanggungjawab

● Sikap susulan yang baik

● Bersedia mengikuti sistem dan prosedur

● Selesa bekerja dengan dokumen dan nombor

● Mampu bertanya kepada orang yang betul apabila maklumat tidak lengkap

● Tidak membuat keputusan tanpa kebenaran atau perubahan manual

Faedah & Kebaikan

• Pengangkutan awam berdekatan
• Lokasi pusat
• Waktu kerja fleksibel
• Kod pakaian kasual
• Cuti peribadi
• Cuti Sabatikal

工作範圍：

• 對冷水機組運作進行例行檢查，包括冷凍水和冷卻水溫度，並檢查所有公用設施管線（水、壓縮空氣和天然氣）是否有洩漏。任何缺陷或問題必須立即報告給主管/部門負責人。
• 檢查並記錄壓縮機運轉參數，包括壓力、溫度、馬達電流（安培）、滑閥位置、馬達轉速、油位和運轉時間。
• 城鎮水樣本進行水質分析，包括城鎮水、飲用水、穀物用水和DPRS用水。
• 每日記錄水錶讀數。
• 如果發生跳脫或斷電事故，請前往故障工廠進行搶修。
• Handel氨冷水機故障排除隔離閥檢查洩漏區域並修復洩漏區域。
• 測量並記錄冷卻水塔（SA、RM、Nescafe 和冷凍水系統）的水電導率、pH 值和 ORP 值，並檢查和清潔水過濾器。
• 在操作冷水機組、冷卻水塔、壓縮機、氨氣或其他需要穿戴個人防護裝備的工作時，請遵守安全規程並穿戴適當的個人防護裝備。
• 如有任何事故或安全事件，請立即向主管/部門主管報告。

福利待遇

• 醫療保險
• 輪班津貼
• 隨著時間的推移

職責：

• 執行設定/換型工作，採取糾正措施消除生產缺陷並減少過程中的損失，上級支援極少。
• 執行機器預防性維護，並為生產線清場做好準備。
• 在Superior提供的最小支援下，對設備進行故障排除並協調糾正措施，以減少或消除缺陷、不合格品或設備停機時間。
• 依照部門標準作業規程履行所有指派的職責。
• 透過查閱與工作和部門相關的現行、修訂和新的標準作業規程 (SOP)，隨時了解正確的操作流程。
• 能夠以不損壞工具和/或設備的方式使用、清潔和存放工作所需的工具和其他設備。
• 在每個班次期間和結束時，保持工作區域清潔有序。
• 有效率、有效地操作手動和自動化設備。
• 根據上級指示，遵守工作環境實務中的相關法律要求，例如 ISO 要求、安全要求等。
• 負責管控相關機密事項，確保資料不洩漏給其他方，並跟進預防措施的實施。
• 根據上級計劃，參加非正式或正式的內部或外部培訓，以提高對與工作相關的必要培訓範圍的認識。

能力：

• 能夠使用精密測量設備，測量精度可達0.5μm。
• 具備多工能力和動手能力。
• 手眼協調能力強，手部靈巧，能讀懂技術圖。
• 根據業務需要，能夠勝任任何班次（最長 12 小時）。
• 身體能夠持續站立和行走。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 個人休假
• 個人發展機會
• 根據年度績效進行加薪。

Job Scope :

• Conduct routine checks on chiller operations, including chilled and cooling water temperatures, and inspect all service line utilities (water, compressed air, and natural gas) for leakage. Any defects or problem must be reported immediately to the Supervisor / HOD.
• Check and record compressor operating parameters, including pressure, temperature, motor current (ampere), slide valve position, motor speed, oil level, and running hours.
• Carry out water analysis for town water samples, including town water, drinking water, cereal water, and DPRS water.
• Record water meter readings daily.
• Attend breakdown plant in case trip or power down.
• Handel ammonia chiller troubleshooting isolation valve check area leaking & fix leaking area.
• Measure and record water conductivity, pH, and ORP for cooling towers (SA, RM, Nescafe, and chilled water systems), and inspect and clean water filters.
• Follow safety procedures and wear appropriate PPE when working with chillers, cooling towers, compressors, and ammonia or other work that requires PPE.
• Report any accidents or safety incidents immediately to the Supervisor / HOD.

Perks & Benefits

• Medical insurance
• Shift Allowance
• Overtime

職位描述：

* 收到客戶提供的建築師圖和結構圖後，繪製殼體圖。

* 在進行鋁模板施工之前，先與客戶溝通殼體圖紙事宜。

* 依要求參加現場會議、顧問會議，並定期向部門主管報告進度。

* 與建築師和工程師溝通，並將獲得的知識融入圖紙中。

* 識別潛在的設計錯誤並將其傳達給團隊其他成員。

* 與工程團隊一起準備、審查和修改。

* 向客戶準備放樣圖和材料清單。

要求：

* 至少擁有建築或結構工程專業的文憑/學位。

* 至少2年建築和結構圖繪製工作經驗。

* 熟練軟體（AutoCAD、Revit 等）者優先考慮。

* 能夠與團隊良好合作，也能獨立工作。

* 具備與不同方溝通的能力。

* 出勤良好，認真履行職責。

* 樂於學習，勤奮努力，自律性強，能夠在規定的時間內完成任務。

歡迎應屆畢業生申請。

職位描述：

我們正在尋找一位認真負責、注重細節的行政主管，以支援我們的日常行政營運、SQL系統記錄、發票流程和營運協調。

該職位負責確保所有訂單、發貨、發票、付款和收據記錄準確錄入，並有相應的憑證支援。

應徵者必須能夠嚴格遵守公司流程，並與行政、銷售、倉庫和配送團隊合作。這是一個執行和支持崗位。

主要職責：

• 在 SQL 系統中輸入和更新客戶、訂單、出貨、發票、付款和收據記錄。
• 根據有效的證明文件，準備並核對發票資訊。
• 請確保發票詳情（如客戶名稱、商品、數量、價格、單據編號和付款條款）準確無誤。
• 支援日常行政操作，包括文件準備、歸檔和記錄更新。
• 協助進行收貨單/退貨單/發票文件的核對和跟進。
• 與內部團隊協調訂單狀態、出貨記錄、簽收單和庫存移動單據。
• 聯絡相關人員跟進缺失或不完整的文件。
• 妥善保管報價單、送貨單、收貨單、發票、交貨單、付款單和收據等文件。
• 如有任何資訊缺失、錯誤或不匹配，請向報告經理報告。
• 根據需要準備簡單的每日或每週管理總結。
• 遵循公司文件流程，避免未經授權的手動變更。

主要要求：

● 至少 1-2 年行政、發票、銷售支援、營運支援或相關職位的工作經驗。

● 有使用 SQL 系統、會計軟體、ERP 系統、庫存系統或類似業務系統的經驗。

● 能夠處理發票、送貨單、客戶訂單及相關銷售文件。

● 注重細節，尤其是數字、商品代碼、數量、價格和文件參考資訊。

● 基本了解銷售單據流程，如報價單、出貨單、發票、交貨單、付款單和收據。

● 具備基本的 Microsoft Excel / Google Sheets 技能。

● 能夠與行政、銷售、倉庫和配送團隊進行清楚的溝通。

● 責任心強，做事有條理，能夠遵守既定程序。

● 能夠認真細緻地工作，不擅自更改或走捷徑。

● 能夠在繼續操作之前標記並報告不完整或不清楚的資訊。

優先條件：

● 擁有快速消費品、分銷、貿易、物流、倉儲或批發行業經驗。

● 熟悉 SQL 會計/庫存系統。

● 具備審核收貨單、收貨憑證、發票、收貨證明、付款記錄或庫存移動單據的經驗。

● 能夠準備簡單的管理報告或摘要。

● 能夠適應流程驅動型的工作環境。

我們正在尋找的工作方式

● 注重細節

● 穩定可靠

● 良好的後續跟進態度

● 願意遵守制度和流程

● 能夠熟練處理文件和數字

● 資訊不完整時，能夠向適當的人詢問。

● 不會做出未經授權的決定或進行手動更改

福利待遇

• 附近公共交通
• 中心位置
• 彈性的工作時間
• 休閒著裝要求
• 個人休假
• 學術休假

Job responsibilities:

• Handling walk-in customer and sales team in related to service related process.
• Attend ad-hoc service case (Klang Valley) whenever is needed from time to time basis.
• Assist service supervisor on related task with service operation process.
• Stock keeper & inventory monitoring for spare part.
• Perform any other ad-hoc duties as assigned by management.

Job specifications:

• Min. SPM qualification.
• Able to converse & read English & Malay language.
• Microsoft words & Excel. (For data entry only).
• Experience in inventory management.
• Added advantage for technical knowledge with problem solving skills.

Perks & Benefits

• Medical include wellness
• EPF
• Sosco
• Year-end bonus

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

Scope : Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Job Description

• Responsible to assist Head of Department to ensure all repair and service
• jobs are completed in timely manner according to department standard of procedure.
• Site inspection, troubleshoot and provide resolution for customer pumps problem.
• Ensure all reports and records are updated after completion of work.
• Responsible for material planning for service department when necessary.
• Mechanical troubleshooting.
• Pump overhaul job.
• Carry out maintenance checklist, preventive and corrective maintenance.
• Fabrication job.
• To carry out any other duties & ad-hoc assignments as when needed.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Johor Bahru
• • Able to start work immediately will be an advantage.

Responsibility

• Troubleshooting equipment issues on-site
• Install and setup of coffee machines and grinders
• Restore, repair and customize coffee machines
• Provide emergency support
• Visiting clients for services, breakdowns and repairs

Requirements

• Possess minimum qualification with SPM or equivalent
• Prefer 1 year of working experience as a technician for mechanical / electronic parts.
• Valid driving license to travel to sites.
• No prior technician experience will be considered as well
• Able to work in a team

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

工作職責：

• 負責接待到店顧客和銷售團隊，處理與服務相關的流程。
• 根據需要，隨時處理巴生谷地區的臨時服務案件。
• 協助服務主管完成與服務營運流程相關的任務。
• 備件庫存管理和監控。
• 執行管理層指派的其他臨時性任務。

職位要求：

• 最低學歷要求為SPM（馬來西亞教育文憑）。
• 能夠用英語和馬來語進行交流和閱讀。
• Microsoft Word 和 Excel。 （僅用於資料輸入）
• 具備庫存管理經驗。
• 具備技術知識和問題解決能力者優先考慮。

福利待遇

• 醫療包括健康
• 僱員公積金
• 索斯科