Total 2,564 process engineer job vacancies

The Mechanical Engineer shall be responsible to perform engineering analytics, provide engineering solutions and perform defect investigations to support equipment refurbishment & maintenance projects. The candidate shall be required to independently conduct defect troubleshooting, failure analysis, engineering analysis and develop engineering solutions to the problems identified. The candidate shall also collaborate with other internal and external stakeholders on engineering and maintenance efforts and ensure high equipment reliability and availability.

Responsibilities

• Lead in the identification and consolidation of engineering standards for the respective mechanical/electrical and electronics/hydraulic and structural systems/thermal systems.
• Develop work instructions, test parameters, test jigs and test benches to enhance equipment repair and overhaul capabilities.
• Lead in the conduct of engineering analytics for equipment failure and trending of defect data to seek engineering insights and identify areas for reliability and safety improvements.
• Lead in the development of in-house capabilities to support the evolution from preventive to predictive maintenance.
• Lead in the development of engineering solutions, propose relevant modifications and work with Ops and Maintenance team to implement and validate safety and effectiveness of the solutions.
• Identify / develop / evaluate alternate parts, out-of-manual repair and modifications to support obsolescence management.
• Lead in the conduct of defect investigation to identify root cause and follow-up, including developing of fault tree analysis, FEMCA and conduct of forensic investigation.
• Perform review of project design specifications to support refurbishment & maintenance projects to ensure adequate safety, reliability, maintainability and operability considerations.
• Any other tasks assigned by supervisor.

Qualifications & Work Experience

• Diploma or Degree in Mechanical / Electrical & Electronic Engineering/Mechatronics Engineering or equivalent from a recognized institution.
• Preferably with at least 2 years’ working experience in automotive, aerospace or heavy equipment environment.
• Fresh graduates from local universities are welcome to apply.

Skills

• Comfortable to work hands-on in a maintenance workshops environment alongside other Engineers, Assistant Engineers and Technical Officers.
• Adept with diagnostics and reliability engineering methods such as FMECA, Fault Tree analysis etc.
• Possess basic understanding of hydraulic/electrical/mechanical systems for vehicular platforms.
• Able to read and understand technical/ electrical drawings.
• Equipped with Solidworks Software skills for 3D Modelling and Drafting.
• Possess knowledge in Finite Element Analysis (FEA) an advantage.
• Good interpersonal and communication skills.
• Able to present ideas, approach, and objectives clearly.
• Strong analytical and decision-making abilities.
• Able to work independently and as a team effectively adjusting oneself flexibly to different work situations.
• Effective organizational and planning skills.

About the Role:

• Oversee design, installation, and commissioning of electrical systems (lighting, power distribution, ELV systems) for residential, commercial, or mixed-use developments.

• Manage electrical works across project lifecycle—from tendering and contractor coordination to site supervision and handover.

• Plan and oversee preventive and corrective maintenance of building electrical systems to ensure safety, reliability, and compliance.

• Ensure all electrical installations meet regulatory standards (e.g., local codes, safety regulations) and conduct periodic inspections/audits.

• Liaise with contractors, consultants, property managers, and authorities for electrical works, upgrades, and issue resolution.

About You:

• Diploma or Degree in Electrical Engineering or related field.

• 8–10 years of hands-on experience in electrical projects and maintenance, preferably within real estate, property management, or construction environments.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;

• Career development and a promote from within culture;

• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Dependable Solutions Partner Pte Ltd

• We are a well-established growing company, ready for the next phase of expansion.

• We offer a work culture where everyone wins as a team, through trust, support and respect.

Responsibilities

• Responsible for the overall, coordination, implementation and execution of projects ensuring consistency with company commitments and goals

• Good organisation and time management skill, able to work independently with minimum supervision

• Perform project co-ordination works between client, suppliers and sub-contractor pre and post project implementation

• Monitor and report the progress of the projects to all stakeholders

• Able to work under tight deadlines

Responsibilities

• Provide on-site technical support during construction and commissioning activities
• Identify, troubleshoot, and resolve technical issues in coordination with engineering teams and stakeholders
• Ensure all site issues, queries, and solutions are properly documented, tracked, and closed
• Support equipment installation, plant configuration, and LV secondary systems including cabling activities
• Monitor daily site progress and coordinate closely with contractors, partners, and internal teams
• Act as the interface between site teams and engineering offices, ensuring timely communication and resolution
• Participate in technical meetings and support the Site Manager in discussions with stakeholders
• Ensure proper implementation of change management, site queries, redlines, and documentation processes
• Maintain accurate as-built documentation and ensure all teams use the latest approved drawings
• Analyze technical issues, assess impacts on schedule/cost, and propose practical solutions
• Capture lessons learned and contribute to continuous improvement across projects
• Ensure compliance with environmental, health, and safety (EHS) requirements and promote safe work practices

Requirements

• Degree in Electrical Engineering or a related discipline
• Experience in HVDC, substations, or large-scale AC power or infrastructure projects
• Prior experience supporting construction and commissioning in a site-based role
• Strong understanding of electrical drawings (SLD, layouts, cable lists, connection diagrams, etc.)
• Knowledge of equipment installation, cabling systems, and construction sequences
• Familiar with engineering processes such as change management and site documentation workflows
• Proficient in Microsoft Office applications (Excel, Word)
• Strong analytical and problem-solving skills
• Good communication and stakeholder management skills
• Ability to work effectively in a multicultural, fast-paced site environment
• Organized, detail-oriented, and able to work both independently and as part of a team
• Strong commitment to safety, quality, and compliance standards

We regret that only shortlisted candidates will be notified.

Brunel International S.E.A Pte. Ltd.

UEN No: 199603098R

EA License No: 16S8067

Shahidan Yusof - R1658969

Brief Summary:

As a Quotation Engineer within our Product Management team, you'll spearhead the seamless generation of quotations for optical components. Collaborating closely with our engineering department, you'll take charge of sourcing sub-component parts from third-party vendors, ensuring precise and consistent quotes for our sales teams.

Job Description:

• Receive and process RFQ requests from the sales team, entering them into our system and tracking progress using designated trackers.

• Create comprehensive RFQ worksheets, including detailed drawings and specifications, and distribute them to relevant engineering personnel for assessment.

• Coordinate with the engineering, planning, purchasing and quality team to gather inputs on material cost, process cycle times, yields, tooling and manufacturing feasibility. Ensuring RFQs are accurate and complete before submission back to the sales team.

• Conduct thorough analysis and review of high-value quotes with the management team, providing insights and recommendations as necessary.

• Build and maintain strong working relationships with the sales team through effective communication, timely quotation support, and close coordination to meet customer requirements and business objectives.

• Maintain and enhance quotation databases, costing models, Power BI dashboards, and KPI tracking reports.

• Support automation, digitalisation, and data structure improvement initiatives to improve quotation efficiency and data accuracy.

• Ensure compliance with company policies, quality standards, and documentation requirements.

• Participate in cost reduction, productivity improvement, and process optimization initiatives.

• Undertake any other duties as assigned by the management team to support the overall goals and objectives of the Product Management department.

Qualifications:

• Minimum Diploma in Engineering or related discipline.

Required Skills & Abilities:

•  5 years of experience in a manufacturing environment or 2 years of experience in quotations.

• Strong communication, interpersonal, and organizational skills.

• Proficiency in MS Office required

• Experience with business intelligence tools (e.g. Power BI and SAP) and knowledge in optics is advantageous.
  

  Interested candidates may also send your resume to hr@edmundoptics.com.sg

Job Description

• Reports Project Manager
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent (Recognized degree by PE board or BCA)
• RE Registration with IES of Singapore
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage

Job Overview

The world will become more and more intelligent and automated in the future. Are you interested in automation?

UMC will expand production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. You'll have the opportunity to use your passion and expertise in semiconductors to turn your ideas into world-changing products.

We are looking for automation engineers to join our newly expanded fab in Singapore. You will have the opportunity to lead new technology transfer, new line setup, maintenance, quality and productivity improvements to ensure production runs smoothly.

Responsibilities

• Manage AMHS (Automatic Material Handling system), Sorter and FOUP performance metric
• Lead in AMHS daily operation, maintenance & troubleshooting and vendor liaison
• Create new function or tune system to optimize EQ/system performance
• Interact with various groups such as IT, manufacturing, EQ/Process owner and vendors to minimize downtime and maximize throughput.
• Initiate project management on cost, quality, scope and schedule to ensure timely delivery

Qualifications

• Possess at least a Bachelor in related Engineering (Electrical engineering /mechanical engineering / mechatronics / computer management)
• Possess good communication skills in working as a team
• Is self-demanding and committed to innovative solutions to complete task
• Able to think critically with strong problem solving skills
• Possess prior experience in basic IT infrastructure setup / maintenance / troubleshooting / (mainly windows based IPCs) will be an advantage
• Candidates with relevant AMHS hardware commissioning and maintenance experience may be considered for a senior position

Job Description

We are seeking a Field Engineer to support pharmaceutical project execution and site activities within GMP manufacturing environments. The successful candidate will be responsible for providing on-site technical support, ensuring equipment installation, commissioning, and compliance with project and regulatory requirements.

Key Responsibilities

• Provide on-site engineering support for pharmaceutical equipment and systems
• Supervise installation, testing, and commissioning activities at project sites
• Support IQ/OQ/PQ validation activities in GMP environments (if applicable)
• Ensure all site works comply with engineering standards, safety requirements, and GMP regulations
• Troubleshoot and resolve technical issues during construction and commissioning phases
• Coordinate with project managers, contractors, vendors, and client representatives
• Prepare site reports, commissioning records, and technical documentation
• Support preventive maintenance and system optimization when required

Requirements

• Diploma / Degree in Mechanical, Electrical, Chemical Engineering, Pharmaceutical Engineering, or related discipline
• Experience in pharmaceutical, biotech, or regulated manufacturing environment preferred
• Familiar with utilities / process systems / equipment installation (advantage)
• Knowledge of GMP requirements is an advantage
• Good communication and coordination skills
• Able to work in project site environment and travel if required
• Team player with strong problem-solving ability

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Role summary

We are looking for a seasoned IT professional to help support BAU and IT projects by providing in-house solution development as well as end users application support to join our Technology team.

You will need to be competent indifferent aspects of IT, particularly software development, system administration and database administration, and comfortable in embedding GenAI in solution development. Ideally, you also have some experience in asset management functional domain. You will be reporting directly to the Head of Technology.

Key duties and responsibilities

As a software developer:

o   Understanding of investment team and operation users business and process requirements and translating into technical implementations

o   Troubleshooting technical issues

o   Developing new reports

o   Support system / database upgrade

As an application engineer:

o   Manage trading system applications and job processes.

o   Support all activities including day to day system/application administration and problem resolution.

o   Application and user account administration and maintenance.

As a system and database administrator:

o   Perform basic system and database administration tasks

o   Manage outsource vendors on system and database administration and maintenance matters to ensure that Fullerton’s requirements are met.

Education Qualification

Bachelor’s degree in computer science or a relevant discipline

Competency

5+years of experience in software development as well as experience in application support. Experience in system and database administration will bean advantage

Ideally minimum 2 years of experience in investment management industry covering front office to back office activities

Experience in SimCorp Dimension data extraction and importing toolkit, e.g. DEX, DFS and Communication Server is a definite plus

Strong experience in programming such as SQL, QilkSense, .NET, #C, VBA, Scripting and PowerBI

Proficient in using GenAI to optimise IT programming deliverables where possible

Demonstrate some skills in supporting business application with an outstanding analytical, troubleshooting and problem-solving skills

Some understanding on investment management across all asset types

Independent, hands on, able to multi-task and open to working on different IT areas

Good attitude as a team player with good communication and strong troubleshooting skills

Able to rely on experience and judgement to achieve your objectives

Company Overview

Zerro Power Systems Pte. Ltd. began in 2017, specializing in motor controller solutions. The team comprises experts with over 30 years of experience in circuit design across diverse applications.

Job Summary

You will evaluate integrated circuits (IC) and application printed circuit board assemblies (PCBAs) to ensure functionality and quality. Collaborate closely with the design team to perform debugging and validation to support product development.

Responsibilities

• Analyze and test integrated circuits (IC) and application PCBAs to verify performance and compliance with specifications
• Collaborate with the design team to identify, diagnose, and resolve issues during evaluation and debugging phases
• Conduct validation activities to ensure product reliability and functionality meet design requirements

Required competencies and certifications

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Electrical or Electronic Engineering or equivalent
• Minimum 2 years of experience in application or validation roles

Job Responsibilities:

1. Responsible for creating and developing detailed 3D models of buildings or infrastructure projects using BIM software such as Autodesk Revit, AutoCAD, or Bentley MicroStation, etc.

2. To update and maintain the BIM models and drawings to reflect any design changes, construction progress, or as-built conditions and ensure accuracy of shop drawings.

3. Keep the models and drawings up to date and ensure that the information remains accurate and reliable.

4. Using Common Data Environment (CDE) to manage the process of exchange and coordination of BIM model with consultants, client, and stakeholders.

5. Knowledge of Coordinated Combined Services Model (CCSM).

6. Generate shop drawings for preliminary, construction and as-built stages from BIM model.

7. Produce completeness shop drawings as per detail given by engineer/manager and ensure drawings and ensure drawings submission schedule is achieved.

8. Knowledge of Combined Services Drawings (CSD), Structural E&M Drawings (SEM), Concrete Body Plan (CBP) & Wall Setting Out Plan.

9. Ensure that BIM deliverables and documentation follow BIM Execution Plan (BEP) or requirement/instruction as stipulated.

10. Able to manage internal coordination meetings to resolve identified design or construction issues which affected the model.

11. Manage model data to facilitate model coordination between multiple disciplines and sub-contractors.

12. Coordinating with site personnel and subcontractors regarding update on drawings and generating Clash Detection Report.

13. Other ad-hoc duties assigned.

Job Requirements:

1. Diploma/Degree in Structural/Architecture/Engineering/Construction/MEP or equivalent.

2. Minimally 1 year experience in BIM Modeling work in building construction and project execution.

3. Knowledge and experience in Revit, AutoCAD, Navisworks.

4. Experience in LTA / MRT projects is advantageous.

5. Good communication, writing & interpersonal skills.

6. Having a positive attitude and proactive mindset.

7. Adaptable to working both independently and as a team player, with the ability to work under pressure and meet submission deadlines.

Position Summary

The Software Engineer will be responsible for supporting the design, development, deployment, and maintenance of automation solutions for smart factories / high-tech manufacturing lines. This role involves hands-on execution of automation tasks, integrating equipment with factory systems, troubleshooting connectivity issues, and collaborating with cross-functional teams to ensure solutions meet performance and quality goals.

Key Responsibilities

• Assist in gathering operational requirements and executing technical tasks to support automation solution scopes.
• Develop, test, and implement automation scripts, components, and software integrations to enhance system performance.
• Integrate and test vision-based and spatial-sensing components to support automated inspection and equipment monitoring.
• Write and maintain ETL pipelines to collect, transform, and integrate equipment and MES data into usable formats.
• Maintain software version control, track configurations, and document changes to ensure traceability across automation systems.
• Write database queries and assist in maintaining automation-related databases (monitoring, backup, and recovery procedures).
• Follow established data governance standards, access procedures, and life cycle management guidelines.
• Diagnose, troubleshoot, and resolve daily automation, equipment connectivity, and dataflow issues to minimize downtime.
• Collaborate with vendors and internal stakeholders to support the successful delivery and integration of automation projects.
• Research and test emerging automation, IIoT, and digital technologies under the guidance of senior team members.
• Perform any ad-hoc duties assigned by the Company as and when required.

3.      Qualifications & Skills

• Bachelor’s degree in Electrical, Electronics, Mechatronics, Mechanical Engineering, Computer Science, or a related discipline.
• 2 years of experience in equipment automation (ideally in semiconductor, solar, or electronics manufacturing).
• Working knowledge of equipment interface protocols (SECS/GEM OPC UA, Modbus, etc.).
• Hands-on experience diagnosing and troubleshooting hardware/software connectivity to equipment.
• Experience with PLCs, control systems, sensors, actuators, robotics.
• Proficiency in programming languages (C, C++, C#, Python, VB, Golang, Java, etc.).
• Basic understanding of MES / factory systems integration and IoT/ data connectivity.
• Familiarity with relational databases and writing basic SQL queries (Oracle, DB2, SQL,Postgresql, MySQL).
• Strong analytical, troubleshooting, and documentation skills.
• Good communication skills and ability to work well in a team.
• Willingness to travel between sites on project assignments.

4.      Preferred/Additional

• Experience in high-precision, contamination-controlled factory environments such as cleanroom / semiconductor / solar fabs.
• Exposure to AI / machine learning applications in automation
• Prior experience leading multi-site deployments
• Familiarity with Industry 4.0 frameworks                                         

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Job Description

We are looking for a proactive Project Engineer to support the planning, execution, and completion of construction and maintenance projects.

Key Responsibilities

• Assist Project Managers in project execution.
• Coordinate site activities and monitor work progress.
• Prepare technical submissions, method statements, and reports.
• Attend site meetings and coordinate with stakeholders.
• Ensure compliance with safety and quality standards.
• Manage project documentation and drawings.

Requirements

• Degree or Diploma in Engineering or Construction-related discipline.
• 2–5 years of relevant experience.
• Ability to interpret technical drawings and specifications.
• Good organizational and communication skills.
• Familiarity with AutoCAD and Microsoft Office.

Benefits

• Competitive remuneration package
• Professional development opportunities
• Medical benefits and annual bonuses