Total 2,777 infrastructure engineer job vacancies

Job Scope:

• Carryout preventive and corrective maintenance of ACMV systems, including air-conditioning units, FCUs, AHUs, CRAC, ventilation systems, exhaust systems, and associated equipment.
• Perform installation, replacement, upgrading, and commissioning of ACMV equipment and systems.
• Conduct troubleshooting and fault diagnosis of ACMV systems and implement effective corrective actions.
• Inspect equipment regularly to identify defects, deterioration, and operational issues.
• Assess system performance and recommend necessary repairs, replacements, orimprovement works to enhance reliability and efficiency.
• Ensure all ACMV systems operate in compliance with applicable safety regulations, codes of practice, and company standards.
• Prepare maintenance reports, service records, inspection checklists, and other technical documentation related to work performed.
• Coordinate and schedule maintenance, repair, and installation activities to ensure the timely completion of work.
• Liaise with clients, subcontractors, suppliers, and relevant stakeholders regarding maintenance and project requirements.
• Assist in the sourcing, evaluation, procurement, and inventory management of spare parts, tools, materials, and ACMV equipment.
• Monitor stock levels and recommend replenishment of critical spare parts and consumables.
• Participate in tender site visits and site surveys to assess project requirements and provide technical input for tender submissions.
• Support the preparation of quotations, technical proposals, and maintenance plans where required.
• Supervise, mentor, and provide technical training and guidance to junior technicians and apprentices.
• Ensure proper implementation of safe work procedures, risk assessments, and permit-to-work requirements.
• Attend emergency breakdowns and provide after-hours support when required.
• Maintain good housekeeping of work areas, tools, and equipment.
• Perform any other ACMV-related duties as assigned by the superior.

Job Requirements:

• At least 5 experience in ACMV installation, maintenance and repair.
• Education: ITE/ Diploma or equivalent in ACMV/ Electrical or related discipline.

Responsibilities:

• Conduct QAQC daily checks
• Prepare monthly QAQC report for submission to Corporate QAQC Department
• Conducting monthly QAQC Training to Sub-contractors
• Issuance of QAQC Non-compliance to sub-contractors
• Attend monthly QAQC presentation and meeting at Corporate QAQC Department

Job Requirements:

• Min 5 years experience
• Min Diploma in Engineering fields
• Architectural-trained or Structural-trained work experience

About Us

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok, Lemon8, CapCut and Pico as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.​

Why Join ByteDance

Inspiring creativity is at the core of ByteDance's mission. Our innovative products are built to help people authentically express themselves, discover and connect – and our global, diverse teams make that possible. Together, we create value for our communities, inspire creativity and enrich life - a mission we work towards every day.​

As ByteDancers, we strive to do great things with great people. We lead with curiosity, humility, and a desire to make impact in a rapidly growing tech company. By constantly iterating and fostering an "Always Day 1" mindset, we achieve meaningful breakthroughs for ourselves, our Company, and our users. When we create and grow together, the possibilities are limitless. Join us.​

Diversity & Inclusion​

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.​

Job highlights

Positive team atmosphere, Career growth opportunity, Paid leave, Flat organization, Competitive compensation

Responsibilities

About Us

Embedded in client environments, this role leads Forward Deployed Engineers (FDEs) to rapidly develop and debug AI applications to accomplish production-grade deployment, while driving product feature iteration.

Responsibilities

-Develop a deep understanding of customers’ business scenarios, rapidly build AI application prototypes for validation, and continuously iterate them into production-grade Agent systems.

-Design AI- and cloud-based architectures, and leverage AI-assisted development to rapidly implement solutions within customer environments, effectively integrating with customers’ application APIs and data systems while complying with their security requirements.

-Build high-performance evaluation pipelines and observability frameworks to ensure Agent systems meet requirements for accuracy, safety, and latency.

-Identify reusable application patterns and technical challenges, translate them into product feature requests, and help drive product evolution and improvement.

-Work closely with customers’ engineering teams to ensure successful deployment of AI applications, achieving long-term stability, high adoption rates, and sustained business value.

Qualifications

Minimum Qualification

- Bachelor's degree or above in Computer Science, Engineering, Mathematics, or a related field, or equivalent hands-on experience.

- More than 3 years of software development experience, with strong proficiency in Vibe Coding and substantial practical application of it in real-world projects.

- Hands-on experience building AI applications, including areas such as Prompt Engineering, Fine-Tuning, Retrieval-Augmented Generation (RAG), and Agent development.

- Experience in cloud-based architecture design and development, including developing with cloud service APIs/SDKs, automated deployment, and designing highly available and scalable systems.

Preferred Qualification

- Experience developing complex Agent systems, with proficiency in using open-source or commercial Agent development frameworks such as LangGraph, CrewAI, or Agent development SDKs provided by cloud service providers.

- Experience delivering AI solutions for one or more industries, including but not limited to education, healthcare, automotive, financial services, telecommunications, and other sectors.

At Wise, we’re on a mission to make money borderless, instant, and convenient for millions of people and businesses worldwide. Our engineers are at the heart of this mission, solving complex challenges and building seamless, secure solutions that customers love.

More about our mission and what we offer.

Job Description

We're looking for a Senior Software Engineer to join our growing teams in Singapore. The role is a unique opportunity to build beautifully simple experiences that guide our customers through Wise, helping them to live, travel and work without borders.

How you’ll be contributing to our Engineering team:

• Help us take Wise to the next level as we scale to impact 100's of millions more customers. You'll hide away all complexities under the hood of our product and build seamless experiences for our customers

• Contribute to core application functionalities, ensuring a robust and positive user experience, especially during unexpected scenarios or issues. 

• Create clear and helpful interfaces, whilst maintaining consistency, maintainability, performance and an understanding of what problems our customers might encounter along the way

• Take initiative to identify and solve important problems. Coordinates with others on cross-cutting technical issues

• Drive product improvement that impacts the Wise customer experience or empowers internal stakeholders to do their job effectively. 

• Proactively identify and tackle technical debt becoming too big through planning work and aligning the team. Does this with careful evaluation of additional cost on development

Qualifications

A bit about you

• You have solid Java 17 plus knowledge and experience with Spring framework

• You have experience working with relational and non-relational databases, query optimisation and schema design

• You approach challenges with a strong product mindset, prioritise customer needs and make data-driven decisions to fix customer pain-points

• You have led the design and development of complex engineering solutions and understand their broader impact on business outcomes.

• You have excellent communication skills and can articulate complex, technical concepts to non-technical audience

• You provide technical guidance and mentorship to junior and mid-level developers

• You have front end experience in technologies like React, Next, Svelte or Angular

• You are familiar with Continuous Integration and deployment frameworks

…but don’t worry we don’t expect you to know everything!

Some extra skills and experiences that would be great:

• You have experience with financial systems including how payments and digital onboarding flows work

• You have some Groovy experience

• You have experience in technical leadership - maintain technical excellence of your team, managing performance, giving feedback, and coaching engineers to thrive

What you can expect as an Engineer at Wise:

We don't measure seniority by years of experience, but by the impact you create and the complexity of problems you can help solve. As a Senior Software Engineer at Wise, you would be given the licence to:

• Lead medium to large (8-16 engineering weeks) sized projects that have a meaningful impact on Wise product and customers

• Own the technical domain of your team with a view on how it should move forward

• Propose ideas to improve and grow your team’s product

• Embrace long-term ownership of projects while training other engineers to reduce single points of failure

• Architect and design services that allow for iterative delivery and future scaling

• Collaborate closely across functions like product, analytics, design, and operations to ensure smooth and effective delivery

To get the best view of what we expect at all levels of our engineering team, you can take a look at our Engineering Career Map

Job Description

• Lead, manage, and monitor the day-to-day execution of engineering projects to ensure milestones and technical specifications are met.
• Develop detailed project execution plans, track timelines, manage project budgets, and implement cost-control measures.
• Review engineering designs, drawings, and technical documentation for accuracy, feasibility, and compliance with quality standards.
• Serve as the primary point of contact for clients, vendors, authorities, and internal teams to facilitate smooth project communication and issue resolution.
• Identify potential project risks, engineering bottlenecks, or safety hazards, and proactively implement mitigation strategies.
• Ensure all engineering activities adhere to local regulatory standards, building codes, and Workplace Safety and Health (WSH) regulations.
• Mentor and guide junior engineers and technical staff, fostering a collaborative and high-performing team environment.

Job Requirements

• Bachelor’s Degree in Engineering (Civil, Mechanical, Electrical, or a related discipline).
• Minimum of 5–8 years of proven experience in project engineering, with at least 2 years in a senior or supervisory capacity.
• Strong track record of successfully delivering complex engineering projects from inception to handover.
• Deep understanding of local engineering standards, building codes, and workplace safety regulations.

Job Description & Requirements

Job Description & Requirements

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Key Responsibilities:

• Administer and maintain Microsoft Windows environments, including patch management, clustering, and Active Directory/LDAP services.
• Design and implement Azure Hub-and-Spoke network architecture.
• Develop and deploy scalable, secure, and cost-optimized cloud solutions on Microsoft Azure.
• Build and configure enterprise infrastructure systems in alignment with high-level architectural designs.
• Manage and support enterprise tools and platforms including Tanium, Azure Entra ID, Intune, Microsoft Defender for Endpoint (MDE), and Azure Active Directory.
• Execute Tanium and SCCM-related operational tasks and project deliverables.
• Participate in Microsoft 365 feature rollouts, enhancements, and related projects.
• Collaborate with project managers and stakeholders to deliver tasks within defined timelines.
• Serve as Subject Matter Expert (SME) for Wintel-related data center operations.
• Contribute to initiatives involving DevOps, Artificial Intelligence, SASE, Identity Management (IDM), Endpoint Detection and Response (EDR), SNMP, and SOC operations (good to have).

Requirements:

• Bachelors degree in Computer Science, IT, or related field (or equivalent experience).
• 8+ years of experience in Windows Server administration and project implementations
• Experience with Microsoft Active Directory, DNS, DHCP, and Group Policy.
• Familiarity with cloud platforms (Azure, AWS) and virtualization.
• Certifications such as MCSA, MCSE, AWS/Azure Certification.
• Strong knowledge of TCP/IP, VPNs, Firewalls, and Routing

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

· Time to time site temporary facility and utilization planning.

· Assist PM on detailed planning of monthly work actives, weekly schedule.

· Assist PM to draft all the progress meeting, coordination meeting minutes, method statement.

· Have experiences and able to perform delay analysis to demonstrate the number of EOT required and/ or resulted by the any delay events, to keep proper records of all the documents required for EOT and Variation claim.

· Finalised and assisted in Baseline Programme incorporating LTA comments related to Programming Plan compliance in Design, Procurement, Construction, Installation and Commissioning Phase (Software Used ‐Primavera P6).

· Update the Progress on a Monthly Basis for all Activities and generate an Overall S‐Curve.

· Prepare Weekly Trend Charts for all Major Items of Work and Monitor the Status of Progress periodically.

· Requirement;

· Minimum of 5 years of relevant experience in construction.

· planning and programme coordination for railway projects.

· Experienced in the use of Primavera.

Job Description:

• Drive the design of next-generation semiconductor automation equipment and modules, transforming ideas into functional designs and prototypes.
• Create detailed fabrication, assembly, and layout drawings using 3D CAD tools, such as CREO, SolidWorks, or other acceptable software.
• Perform structural, kinematic, and dynamic analyses, including Finite Element Analysis (FEA) simulations and tolerance stack-ups, to ensure design robustness.
• Work with software, electronics, and vision engineering teams to integrate mechanical designs into complete system solutions.
• Apply Design for Manufacturing (DFM), Design for Assembly (DFA), and concurrent engineering principles to ensure efficient and robust designs.
• Develop and validate pneumatic and hydraulic circuits and ultra-precision, high-speed pick-and-place mechanisms.
• Contribute to design standardization, cost optimization, and project management for research and development initiatives.

Job Requirement:

• Minimum Degree in Mechanical Engineering or related field
• Minimum 5 year working experience in Mechanical Design in Automation/ Semiconductor Industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities: 

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type 

• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs. 

• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD Wet Etch peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements 

• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron. 

• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions 

• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes. 

• Design and implement advanced process monitoring and control methodologies. 

• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment. 

• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings 

• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers. 

• This position requires communication and collaboration with partners both locally and globally. 

• Strict adherence to Micron Intellectual Property protection policy is a must. 

• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions. 

• Using, applying, and leveraging AI, identify opportunities to streamline workflows, optimize processes, and support innovation by incorporating AI-driven solutions and enabling data-driven decision-making across projects and teams

Requirements: 

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcome to apply. 

• 2-3 years of semiconductor industry experience is preferable 

• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport 

• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM, FTIR. Understanding of various integration and structural impacts and constraints related to wet etch processes. 

• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular. 

• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data 

• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects 

• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications. 

• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously 

• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development. 

Micron’s Singapore Process Development (PD) group in Technology Development (TD) is looking for Plasma-CVD / Diffusion PD engineer to support Plasma-CVD/DIFF process development of advanced technology nodes. You will design and optimize Plasma-CVD or Diffusion for Micron’s innovative NAND Flash products.

As a PD Engineer, you will take ideas from conception through process development then implementation in our manufacturing facilities. In addition to your technical responsibilities, you will also run the projects of highly technical nature. This role is essential to the success of Micron’s products and may require business-related travel. Primary areas of responsibility include Plasma-CVD or Thermal Diffusion process and film characterization, optimization, design, troubleshooting, process transfer and fundamental research.

Advanced Thin Films PD Engineer will interact with groups such as Process Integration, Metrology, Surface characterization labs, Electrical Failure Analysis, Yield Enhancement, Manufacturing and Equipment vendors/suppliers, to ensure robust thin film processes that meet the precise physical and electrical requirements for Micron Products.

As an Advanced Thin Films PD Engineer at Micron, you will be required to travel for brief business purposes. This position requires that you have an aptitude for a research and development (R&D) environment, good organizational skills and ability to work independently as well as in a team environment. This position may often require weekend support to R&D Pilot Line, for example, in case of pilot/manufacturing line excursions/downs and monitoring program-critical lots thought various modules as deemed necessary.

Your responsibilities will include, but are not limited to:

• Process Development

• Design and develop and deliver process package to meet product specification requirements as per program targets and timelines

• Characterize the processes using appropriate techniques (SEM, TEM, XPS, SIMS, AFM, etc.)

• Design and execute experiments, analyze data and present it in the appropriate forums.

• R&D Pilot Line in the Fab

• Improve process maturity, capability and sustain processes in the fab under your ownership

• Updating the Fab engineers on customer issues and technology needs.

• Supporting root cause defect and unique fail mode analysis.

• Process Integration

• Delivering advanced technology to meet future product nodes.

• Developing recipes to meet structural & electrical requirements.

• Managing wafers though Thin Film levels in support of special requirements.

• Other Process Areas

• Working in cross-functional teams to jointly develop Array and CMOS structures.

• Supporting cross-functional failure analysis and yield improvement.

• Advanced Thin Film peers

• Maintaining or developing expertise in multiple process, hardware, or technology areas.

• Serving as a resource for peers in recipe & process development.

Successful candidates must have:

• Education requirements

• PhD in Physics, Materials Science, Chemical Engineering, Electrical Engineering, Chemistry, or related fields

• BS/MS+5 years equivalent industry or research experience may substitute for a PhD.

• Understanding in one or more of the following topics Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena.

• Solid troubleshooting, experimental design and data analysis skills.

• Strong computer skills, including MS Office.

• Plasma physics background and understanding of plasma sources used in plasma CVD is highly preferred.

• Understanding of CVD and Diffusion deposition processing principles.

• Rudimentary understanding of process control and Statistical Process Control (SPC).

• An understanding of solid state devices.

• An understanding of semiconductor process.

• Knowledge of advanced data analysis techniques and scripting is highly preferred

• Open to work off shift and weekends if necessary

• Open to domestic and international travel

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Construction and Civil Engineering
• Position Title: Site Engineer (Building Construction)
• Working Location: Central
• Working Hours: 5.5 Days (Mon – Fri, 8:00 AM – 5:00 PM; Sat, 8:00 AM – 12:00 PM)
• Salary Package: Basic Salary
• Duration: Permanent Role

Key Responsibilities

• Assist Senior Engineers and Project Managers in monitoring project progress.
• Assist with QA/QC inspections to ensure works meet project requirements.
• Ensure safety standards are followed in the assigned work area, with support from the Safety Department.
• Supervise subcontractor works to ensure approved methods and materials are used.
• Attend progress meetings and coordinate with contractors and suppliers on project implementation matters.
• Attend site meetings when required.
• Inspect site works and monitor progress to ensure quality control and compliance with authority requirements.
• Coordinate internally with different departments and externally with clients and consultants.
• Assist in project planning, documentation, and site execution.
• Coordinate, supervise, and monitor site works, manpower deployment, material planning, and material ordering.
• Coordinate and follow up on project submissions.
• Prepare weekly site progress reports and other required submissions.
• Perform any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma or Degree in Civil Engineering, Construction Management, or a related field.
• Relevant site engineering or construction experience is preferred.
• Good understanding of site coordination, QA/QC inspection, and construction safety requirements.
• Able to read and interpret construction drawings, method statements, and project specifications.
• Good coordination and communication skills.
• Able to work independently and as part of a team.
• Proficient in Microsoft Office and relevant project documentation tools.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10081 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Centre of Excellence in Maritime Safety (CEMS) is a national R&D centre, a collaborative effort between Singapore Polytechnic and the Singapore Maritime Institute. We focus on developing innovative digital solutions and training systems to enhance maritime safety. Our state-of-the-art research facilities, including South-east Asia's first navigation research simulator, setting us as an innovation champion.

About the Role

The appointee will be part of the CEMS AI & Software team in developing digital solutions to enhance simulator training and assessment, innovate in training pedagogy for the maritime industry. The role may also involve contributing to department- and school-level software initiatives that support digitalisation and automation across R&D, operations, and education.

Responsibilities:

• Lead projects and provide technical contributions across the full software development lifecycle (SDLC), including requirements gathering with industry partners and internal stakeholders.

• Work closely with the AI team at CEMS to deploy and integrate AI solutions—such as Natural Language Processing, computer vision, and data analytics —into simulation platforms to enhance training and assessment capabilities.

• Collaborate with third-party simulator technology and solution providers to design and develop reusable code libraries and scalable APIs for integration and interoperability.

• Drive improvements to existing software systems by identifying performance bottlenecks, refactoring codebases, and enhancing maintainability and scalability.

• Contribute to the conceptualization, proposal development, and implementation of new research and development projects aligned with CEMS’s strategic objectives.

• Guide junior software engineers and student interns in software development best practices, code quality, and project execution.

• Prepare and deliver regular project updates and technical presentations for CEMS Governing Board and senior management meetings.
  

  Requirements:

  • Relevant qualifications in Computer Science, Computer Engineering, or a related field.

  • Relevant experience in the following areas: Production-grade software development, Backend and/or frontend application development, RESTful API design and implementation using modern frameworks (e.g., ASP.NET Core, Spring Boot, Django, Express.js)

  • Strong programming skills in one or more modern languages (e.g., C#, C++, Java, Python), with the ability to quickly learn new technologies and frameworks.

  • Experience working with relational and non-relational databases (e.g., MySQL, Oracle, MongoDB).

  • Good understanding of object-oriented design, software design patterns, and CI/CD practices.

  • Familiarity with version control systems (e.g., Git, GitLab).

  • Hands-on experience with containerization tools such as Docker.

  • Ability to build quick prototypes, tools, or scripts to support development or testing.

  • Strong interpersonal, verbal, and written communication skills; effective in collaborative and fast-paced environments.

  • Experience with end-to-end AI solution implementation using frameworks such as TensorFlow or PyTorch is a plus.