Total 2,039 firmware engineer job vacancies

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform failure analysis, root cause investigation, and fault isolation on SSD products during NPI, qualification, and mass production phases using test logs, diagnostic tools, and hardware analysis techniques. 

• Debug hardware and manufacturing-related failures by analyzing tester logs, power rails, NAND, DRAM, controller behavior, and interface issues to drive corrective and preventive actions. 

• Collaborate with cross-functional teams including Product Engineering, Process Engineering, Quality, Manufacturing, and Suppliers to resolve yield, process, and test related issues. 

• Develop and maintain debug procedures, cookbooks, troubleshooting guides, debugging tools, and knowledge databases to improve diagnostic accuracy, turnaround time (TAT), and operational efficiency. 

• Generate technical reports and present failure findings, corrective actions, and yield improvement recommendations to management and stakeholders while supporting continuous improvement initiatives. 

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.

Role is opened in Poland. 

Unit4 Global Cloud Operations Team is seeking a skilled Security Operations Engineer to join our international team. As part of this dynamic team, you will play a key role in maintaining the security and integrity of our cloud infrastructure and environments. You will monitor security systems, analyze threats, and manage security incidents from detection through resolution, ensuring a robust defense against emerging threats.

Key Responsibilities:

• Continuous Monitoring: Continuously monitor cloud environments for potential security threats.
• Threat Analysis: Analyze security alerts and logs to identify suspicious activities.
• Incident Response: Lead response efforts during security incidents, including containment, eradication, and recovery.
• Investigation: Investigate security breaches and identify root causes.
• Post-Incident Review: Conduct post-incident analysis to suggest improvements.
• Documentation: Document security incidents and maintain detailed records.
• Customer Incident Handling: Act on security incidents reported by customers or identified proactively.
• Policy Adherence: Follow established security policies and procedures.
• System Maintenance: Monitor and maintain security systems such as firewalls, intrusion detection and prevention systems, and SIEM systems.
• Preventative Measures: Implement security measures to prevent future incidents.
• Staying Current: Stay up-to-date with the latest security trends and technologies.

Deals with clients,designers, consultants and contractors, supervies and implements projects fromstart to the completion and handover.

- Perform preventive andcurative Electrical and instrument maintenance.

- Project planning &coordination including preparation of drawing and explain to team.

- Procurement andscheduling of electrical works.

- Settle issues onsystems after handover during the defects and liabilities period.

Supervisesduring the construction stage from start to the completion and handover of theproject.

-Minimum Degree in Engineering or similar field its equivalent.

-Good interpersonal skills and pro-active in problem solving.

-Proficient in Microsoft office - Word, Excel & Powerpoint.

Knowledgein other design related software such as Autocad and Autocad 3Dmax.

-Can work under pressure and team player.

-Able to work long hours due to project urgency if needed.

- Qualityfocused and ability to meet deadlines in fast-paced project environment.

-Ad-hoc duties

Job Description:

• In charge of providingengineering support for product modifications, cost reductions, manufacturing process improvementsResponsible f
• In charge of leading and participating in design and development activities from concept to production with a well-defined Product Development Process.
• Responsible in driving successful development of new product development projects, research and develop ideas for new and improved designs of the components part
• In charge of generating design specifications, design proposals and/or product designs that meet customer requirements.
• Responsible in working with cross-functional team involved in new product development and manufacturing

Job Requirement:

• Minimum Degree in Mechanical/ Manufacturing/ Electronics Engineering or related field
• Minimum 2 years of working expereince in product design in components

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Responsible in analyzing and troubleshooting customer issues via phone or email as well as on-site
• Taking charge of conducting product application testing for sales reps and customers.
• Responsible in conducting post sales application training to customers.
• In charge of receiving phone calls or emails from sales reps and customers and answering to the enquiries concerning product capabilities, specifications, and applications
• Responsible in creating and updating manuals for post sales application training for customers.
• Responsible to travel yo customer’s site for on-site support including setup, adjustment/ finetuning the system.
• In charge of assisting sales engineer with on-site presentations to customers when required
• Other duties or projects, as assigned

Requirements

• Minimum Diploma in Electrical / Electronic Engineering or equivalent
• Minimum 1 Years of working experience in industrial equipment industry
• Familiar with Logic control, Microsoft Excel skills, communication protocol (i.e Serial, Modbus TCP, Ethernet, EIP etc.) and HMI programming

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Identify and manage projects and sales opportunities and develop new accounts to drive revenue growth with potential & existing customer.
• Prepare and deliver technical presentations explaining product or services to existing and prospective customers.
• Understand customers’ needs and competitors in order to develop strategy to win sales.
• Liaise and work closely with sales support staff/application engineer.
• Provide sales and first-level technical support to all customers’ enquiries, deliveries and issues or feedback.
• Product selection and generate quotations based on RFQ.
• Project sales management and submission of Sales Report.

Job Requirements:

• Min Diploma in Engineering (Mechanical) or equivalent.
• Min 1 years of working experience in the related field is required.
• Possess Class 3 Driving License.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities

• To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractor.
• Liaising with authorities, client's representatives, sub-contractors and consultants.
• Checking and ensuring all plans and work are as per specifications.
• Attending site walks, inspections, meetings and preparing of monthly reports and submissions.
• Coordinate and liaise with relevant parties to ensure smooth project implementation.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess at least a Diploma/Bachelor’s Degree in Civil Engineering or its equivalent
• At least 2 years of working experience in the related field.
• Good communication, self-initiative and interpersonal skills..

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of Implementing and maintaining the Quality Management System standards and Environment, Health and Safety SOPs and Manuals.
• Responsible in ensuring adherence to Compliance and Regulatory Oversight for Standard Operating Procedure, Quality and Safety Manuals, Maintenance Organisation Expositions.
• In charge of Certification Audits by Civil Aviation and liaising with assigned CAA Principal Maintenance Inspector for approvals, certifications and inspections.
• Responsible in conducting Internal Quality Audit, External vendor QMS audits as well as managing vendor qualification into the Approved Vendor List
• Take charge of assigned audit conducted by Customer.
• In-Charge of the Quality and Safety of assigned workshop
• Responsible for conducting investigations for incidents and accidents, warranty
• Responsible assisting the Manager in developing, reviewing, improving and implementing quality and safety management procedures
• Attend meetings and other duties as delegated by the Quality Manager

Requirements:

• Min Diploma in aerospace engineering/engineering
• Min 3 years of in QMS in Aerospace Industry.
• Qualified Auditor is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900