Total 97 process engineer job vacancies in Transportation / Logistics category

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

Our client is one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a Sourcing Engineer to be part of their Procurement team for ongoing transformation projects. They are located in the East.

Responsibilities of Sourcing Engineer:

• Manage sourcing of mechanical sheet metal components
• Drive cost reduction through negotiations, alternative sourcing, localization, and supplier consolidation
• Build and manage a strong supplier network, including key strategic partners
• Identify design and value engineering opportunities for cost savings
• Improve lead times, payment/delivery terms, and order quantities (MOQ/SPQ)
• Ensure suppliers meet quality, cost, delivery, and capacity requirements
• Collaborate with engineering, operations, and product teams on sourcing activities
• Monitor market trends and mitigate risks (e.g. EOL, single-source parts)
• Support cost evaluation during NPI and engineering changes (ECN)
• Work with engineering on design reviews and technical issue resolution
• Support sourcing and supply readiness during build and initial production phases

Requirements:

• Diploma / Degree in Mechanical Engineering
• Min 5 years of sourcing experience in Metal Fabrications or Plastics Tool & Die

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

RecruitPedia Pte Ltd
EA License No: 19C9682
EA Personnel No: R2198636 (Oh Puey Xin)

Our client is one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a Sourcing Engineer to be part of their Procurement team for ongoing transformation projects. They are located in the East.

Responsibilities of Sourcing Engineer:

• Manage sourcing of mechanical sheet metal components
• Drive cost reduction through negotiations, alternative sourcing, localization, and supplier consolidation
• Build and manage a strong supplier network, including key strategic partners
• Identify design and value engineering opportunities for cost savings
• Improve lead times, payment/delivery terms, and order quantities (MOQ/SPQ)
• Ensure suppliers meet quality, cost, delivery, and capacity requirements
• Collaborate with engineering, operations, and product teams on sourcing activities
• Monitor market trends and mitigate risks (e.g. EOL, single-source parts)
• Support cost evaluation during NPI and engineering changes (ECN)
• Work with engineering on design reviews and technical issue resolution
• Support sourcing and supply readiness during build and initial production phases

Requirements:

• Diploma / Degree in Mechanical Engineering
• Min 5 years of sourcing experience in Metal Fabrications or Plastics Tool & Die

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

RecruitPedia Pte Ltd
EA License No: 19C9682
EA Personnel No: R2198636 (Oh Puey Xin)

Why join us?

Bombardier is a global leader, creating innovative and game-changing planes. Our products and services provide world-class transportation experiences that set new standards in passenger comfort, energy, efficiency, reliability and safety. We are a global organization focused on working together with a team spirit.

Position Summary

The Engineer is considered to be part of the operations group and is responsible for perform or supervise work on aircraft or aircraft components and to promote an open communication with all other related departments personnel.

What are your contributions to the team?

• Perform maintenance on customer aircraft in complying with Bombardier Policies & Procedures and Aviation Authorities Rules and Regulations.
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.
• Assist other employees in the performance of their duties within area(s) of qualification.

How to thrive in this role?

• You have minimum Aircraft Maintenance Engineering License with at least 5 years signing experience, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• You have had experience working on Bombardier aircrafts.
• You must Hold College/ Diploma and / or equivalent academic qualification.
• You have interpersonal skills necessary to establish and maintain effective working relationships with internal and external customers.
• You have planning and organizational skills necessary to coordinate workload around multiple assignments.

Now that you can see yourself in this role, apply and join the Bombardier family!

Job Description & Requirements

The Licensed Aircraft Engineer (LAE) is responsible for performing scheduled and unscheduled maintenance, inspections, modifications, and repairs on aircraft in compliance with regulatory requirements, company procedures, and safety standards. The LAE ensures aircraft airworthiness and supports safe and efficient flight operations.

Key Accountabilities and Responsibilities 

• Perform routine and non-routine maintenance, inspections, troubleshooting, and repairs on aircraft systems and components. 

• Certify aircraft for flight following completion of maintenance tasks, ensuring compliance with aviation regulations and company procedures. 

• Maintain accurate maintenance records, logs, and documentation in accordance with regulatory authorities (e.g., CAAS, EASA). 

• Diagnose and resolve technical issues efficiently to minimize aircraft downtime. 

• Ensure compliance with safety regulations, company policies, and maintenance manuals. 

• Assist in the planning and execution of maintenance schedules, modifications, and engineering projects. 

• Mentor and guide junior technicians and apprentices in technical procedures and safety practices. 

• Stay updated with regulatory changes, technical bulletins, and manufacturer service instructions. 

Required Experience, Competencies &Qualifications 

• Valid Aircraft Maintenance License (AML/LAE) issued by the relevant aviation authority (e.g., CAAS, EASA, FAA). 

• Proven experience in aircraft maintenance and certification, preferably in the relevant aircraft type. 

• Strong knowledge of aircraft systems, avionics, structures, engines, and regulatory requirements. 

• Excellent problem-solving, diagnostic, and technical skills. 

• Strong attention to detail, safety awareness, and compliance orientation. 

• Ability to work under pressure, independently, and as part of a team. 

• Good communication skills, both written and verbal. 

• Will be required to hold at least one type rating on an Airline Transport Category Aircraft;  (Note: Specific Type Training (Bonded) will be offered to suitable candidates) 

• At least two years of experience as an LAE.

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Diploma in Aersopace Engineering or relevant
• Minimum 2 years of working experience as Licensed Aircraft Engineer with ATR

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The role and responsibility of a Licensed Aircraft Maintenance Engineer (LAME) is to provide Airbus Helicopters (AH) worldwide customers with Technical Assistance for their helicopter fleets.

The LAME are mechanical: B1.3 and avionic: B2 specialists type rated on Airbus Helicopters products preferably on H225.

The LAME holds an European Union Aviation Safety Agency (EASA) Part 66 license in order to provide technical support as follows:

• Perform scheduled and unscheduled maintenance tasks in accordance with applicable and approved documentation (Aircraft Maintenance Manual (AMM) / Repair Design Approval Sheet (RDAS) / Service Bulletin (SB) / other Original Equipment Manufacturer (OEM) documentation)
• Rectification of all defects reported
• Ensure zero defect post inspection/retrofit
• Provide field services support locally
• Carry out on-the-job training of customer’s personnel, when requested
• Answer to questions by on-site customers related to the performance of the maintenance tasks (in accordance with the agreed maintenance plan)
• Give feedback in the set-up of the maintenance planning (monthly and weekly planning)
• Assist customer’s maintenance personnel in understanding and in the use of technical publications, work report & work order from Part M organization.
• Ensure, when applicable, that quality regulations are met during maintenance activities.

As part of the role, you will be be based in the customer's facility for a minimum of 9 months.

Requirements:

• Diploma in Engineering or related
• At least 10 years or more working experience on Airbus Helicopters product
• Must possess an EASA Part 66 License with Airbus Helicopters Type Rating
• Human Factor / Part 145 / Foreign Object Debris training valid currency
• Excellent communication skills & ability to work on own initiative
• Customer care minded; Customer satisfaction oriented. Available to work with customers outside of working hours as needed
• Adaptable and professional / positive behaviour
• Leadership and autonomy.
• Emotional intelligence
• Problem solving mind set and innovative
• Strong organizational awareness
• English fluency required; fluency in any other local languages could be a plus to be able to liaise effectively with local stakeholders
• IT and digital proficiency

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

• Define and manage vehicle configurations across multiple product variants

• Design, develop, and optimize mechanical and automotive systems

• Collaborate closely with cross-functional teams, including electrical and software engineering

• Perform simulations and engineering analyses (e.g., FEA, CFD) to validate and enhance designs

• Develop prototypes and mock-ups to evaluate performance and refine solutions

• Participate in design reviews and provide technical insights to stakeholders

• Maintain comprehensive documentation of design processes, testing results, and compliance with contractual and regulatory standards

• Provide technical support to manufacturing teams to ensure smooth production and resolve design-related challenges

Your Mission

This position is responsible for the development of HMGICS's Technology Roadmap and maintain its ecosystem of innovation and technology partners. He/She will develop the structure for monitoring performance of various factory processes, identify pain points to be resolved with technology pilots, and leverage data-driven approach to drive continuous improvement.

What To Expect

[Development of Technology Roadmap]

• Support the planning & implementation of technology roadmap in collaboration with factory stakeholders
• Design, develop, and maintain digital transformation use cases and technology catalogue
• Design, develop, and maintain ecosystem of technology and innovation partners, in collaboration with HMG stakeholders

[Work Processes Management, Pain Points Identification]

• Conduct in-depth analysis of existing business processes to identify inefficiencies, bottlenecks, and areas for improvement
• Define methodology and detailed work processes to continually measure performance and project ROI 
• Engage with relevant stakeholders in manufacturing group to gather data and develop insights on critical pain points
• Perform data analysis to identify operational bottlenecks and system impediments
• Develop and redesign workflows, procedures to improve efficiency, quality, and scalability.

[Technology Solution Deployment and Change Management]

• Leverage data analysis and facilitate brainstorming workshops to develop practical and sustainable solutions
• Stay updated on industry trends, emerging technologies, and best practices to drive continuous innovation
• Provide project management support with operation teams to implement solutions
• Monitor performance improvements post-deployment and ensure smooth handover to production team
• Lead change initiatives by working closely with stakeholders to ensure smooth adoption of new processes and technologies.

What You'll Bring

• Bachelor's Degree in Engineering or relevant discipline
• At least 3-5 years (Junior)/ 5-10 years (Senior) of experience in Management Consulting / BusinessProcess Re-engineering / ICT Consulting/ Process/ Operational Excellence Innovation/ Business/ System Consulting
• Strong communication and interpersonal skills, with the ability to influence and engage stakeholders at all levels
• Knowledge on ERP, logistics systems is essential
• Technical skills in process innovation consulting projects, IT/OT System development project
• Working experience in manufacturing or deep understanding in manufacturing industry
• Technical skills in data analysis or B.I.(Business Intelligence) implementation
• Proficiency in process mapping and modeling tools
• Worked in project team responsible for digital application development
• Certification in Lean Six Sigma (Green Belt/Black Belt) or similar is a plus
• Excellent analytical, problem-solving, and project management skills.
• PMP certification is preferred

Job Description

• Leads, or contributes to, the design and execution of end-to-end supply chain solutions and strategy including planning, material information and financial flows, manufacturing and logistics.

• Leads or participates in multi-function supply chain projects with an emphasis on project planning, supply chain modeling/analysis and optimization of cost, service and inventory.

• Participates in the design, development and implementation of end-to-end supply chain designs, strategies, models, processes, business intelligence and tools to support business growth.

• Identifies gaps and recommends opportunities for improving efficiency, effectiveness and capabilities of the supply chain.

• Works in conjunction with Information Technology partners to ensure the system framework addresses business requirements.

• Implements, tests, troubleshoots and improves business systems to increase manufacturing quality, efficiency and volume.

Qualifications

• Bachelor's or Master's Degree or equivalent.

• PMP certification preferred, with proven experience managing large-scale, enterprise-level projects.

• Typically, at least 8+ years relevant experience for entry to this level.

Job Description:

• Seeking an experienced Senior Automotive Cybersecurity Engineer to join the company Cybersecurity Lab team. This role will focus on offensive and defensive security activities for automotive systems, including penetration testing, fuzzing, vulnerability analysis, and patch development. The ideal candidate will have strong hands-on expertise in embedded systems security, a deep understanding of cybersecurity attack and defense techniques, and the ability to work across the full technology stack—from firmware and OS internals to application and cloud integration
• Lead and execute security testing on in-vehicle systems, ECUs, and connected automotive components, including penetration testing, fuzz testing, and reverse engineering.
• Perform vulnerability analysis on automotive hardware, firmware, middleware, and application layers.
• Develop and validate security patches and remediation strategies for identified vulnerabilities.
• Build and maintain lab infrastructure for automotive cybersecurity testing (e.g., test benches, network simulators, custom tooling).
• Collaborate with software, hardware, and cloud teams to ensure security issues are resolved effectively.
• Research and evaluate new cyber-attack techniques, tools, and exploits relevant to automotive systems.
• Create custom security tools (scripts, automation, dashboards) to improve test coverage and efficiency.
• Provide technical guidance and mentoring to junior engineers in cybersecurity best practices.
• Contribute to security architecture discussions and security-by-design reviews for automotive products.

Job Requirements:

• Bachelor’s or Master’s degree in Computer Science, Electrical/Electronics Engineering, Cybersecurity, or related field.
• 5+ years of experience in cybersecurity, with at least 3 years in automotive, embedded, or IoT security.
• Proven experience in pentesting, fuzzing, reverse engineering, and vulnerability exploitation.
• Strong knowledge of embedded systems (MCUs, SoCs, automotive ECUs) and related Oss (Linux, QNX, AUTOSAR).
• Solid understanding of secure coding, cryptographic principles, and common automotive security standards (ISO/SAE 21434, UNECE R155).
• Hands-on skills in programming/scripting languages (Python, C/C++, JavaScript, Bash, etc.).
• Familiarity with full-stack development concepts for security testing (frontend, backend, databases, APIs, cloud).
• Excellent problem-solving skills and ability to work independently in a lab environment.
• Experience with CAN, LIN, Ethernet, and automotive communication protocols.
• Knowledge of cloud-connected vehicle systems and over-the-air (OTA) update security.
• Prior contribution to security tooling or open-source projects.
• Security certifications (OSCP, GXPN, CEH, CISSP, etc.) are a plus.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 cschua@hpspartners.com.sg. Shortlisted candidates will be contacted for a discussion.

Job Summary: We are expanding our technical team and looking for a detail-oriented and motivated Assistant Automotive Certification Engineer. This is a fantastic entry-point into the highly specialized field of global vehicle homologation and testing.

Based in Singapore, you will support our senior technical leads in managing EU and ASEAN certification programs for major automotive OEMs. No prior homologation experience is required—comprehensive on-the-job training will be provided. You will assist in compiling technical reports, organizing testing data, and learning the intricacies of international automotive regulations.

Responsibilities

• Project Support: Assist senior engineers in tracking project milestones for Whole Vehicle Type Approval (WVTA) and ASEAN market certifications.

• Documentation: Help compile, format, and organize comprehensive Whole Vehicle Information Documents and technical reports for submission.

• Data Management: Consolidate and validate large volumes of vehicle testing data to ensure accuracy and consistency.

• Coordination: Communicate and coordinate with testing laboratories, internal teams, and clients to ensure testing schedules are met.

• Continuous Learning: Learn to interpret complex international automotive regulations (e.g., ECE, GSR II) under the close guidance of industry experts.

• Technical Translation: Assist in reviewing and translating basic technical specifications and design requirements between English and Mandarin.

Required Competencies

• Language Skills: Proficient in Mandarin (Reading & Spoken) is mandatory to read technical drawings, analyze data from Chinese OEMs, and communicate with their R&D teams.

• Proficient in English for official reporting and internal communication.

Preferred Qualifications

• Diploma or Degree in Mechanical, Automotive, Mechatronics, Electrical Engineering, or related fields.

• 0 to 3 years of working experience. Fresh graduates with a strong passion for the automotive engineering sector are highly encouraged to apply.

• Basic understanding of engineering documentation, QA/QC processes, or testing environments is a strong plus.

• Detail-oriented, proactive, and willing to learn in a fast-paced startup environment.

Other Information

• Residency: Open to Singapore Citizens and Permanent Residents (PRs) only.

• This is a unique "Contract-to-Hire" opportunity initially employed by SingMobility Technology Surveillance Pte. Ltd. and deployed on-site to DEKRA’s Singapore office.

• Upon successful performance, there is high potential for a direct permanent employment contract with DEKRA Singapore as a founding member of their new technical setup.

What We Offer:

• Learn from the Best: Gain niche expertise in the booming Electric Vehicle (EV) sector with full training provided.

• Brand Power: Work alongside experts from DEKRA, a global leader in testing and certification.

• Career Growth: Start quickly via deployment with a clear path to permanent MNC employment.