Total 267 Quality Assurance / Control job vacancies

Key Responsibilities

• Expected to take accountability of assigned project scope of work and timelines.

• May work from limited or no documentation

• Perform tool build, integration, testing and troubleshooting to start-up new tools. 

• Perform Planning, communicating, and coordinating support plans between stakeholders

• Perform periodic diagnostic testing and necessary preventative maintenance to ensure tool productivity and quality performance. 

• Able to work with Clean Room Facilities stakeholders to specify tool facilities requirements to meet needs of the tool.

• Able to work with the facilities group to manage & troubleshoot any facilities related issues

• Applies diagnostic techniques and use of documentation and test equipment. Define & execute Qualification plans.

• Able to perform routine preventive maintenance within established timeframes.  

• Participate in projects to improve productivity, maintenance downtime, costs reduction and uptime improvement.

• Uses training and experience to identify process, software or hardware related system problems.

• Strives to perform BKM’s. Uses knowledge management systems.  Follows all IP guidelines.

• Assumes responsibility for complete customer satisfaction within work area

• Comply with all safety procedures and consistently demonstrates safety as a value

Requirements

• Prior Experience in ALD Process tools is preferred 

• Prior experience in Cleanroom Facilities VMB & Ampoule Set-up is preferred.

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools

• Relevant education qualification in Engineering

• Ability to work with deadlines and with all levels of stakeholders

• Ability to work in cleanroom work environment

• Expected to work shifts and weekends (Rostered) 

Work Location

• Fusionopolis (One North)

Salary: Up to 9K
Location: Central

Responsibilities:
• Manage compliance policies, audits & risk assessments
• Lead data protection, HSE & ESG initiatives
• Support ISO9001 and information security compliance
• Handle incident investigations & client compliance questionnaires
• Maintain legal risk registers and remediation plans
• Support business continuity and vendor due diligence activities

Requirements:
• Min. Degree in relevant discipline
• Min. 2 years of compliance / risk / information security experience
• Knowledge of ISO / data protection / HSE preferred
• Strong communication and stakeholder management skills
• Able to travel within APAC when required

If interested, please email me at alexgoh@recruitexpress.com.sg or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Company Overview:
Our client is a growing semiconductor and photonics technology company supporting advanced product development, testing, and manufacturing operations within a controlled cleanroom environment.

The Singapore office functions as the company’s Fabless R&D and operational hub, supporting prototype development, engineering activities, and commercialization support.

Key Responsibilities:
• Perform incoming, in-process, and outgoing inspections on materials, components, and finished products
• Conduct visual and measurement testing to verify product specifications and quality standards
• Record inspection and testing results accurately into reports and quality systems
• Approve or reject products based on inspection findings
• Prepare non-conformance and inspection reports where necessary
• Support failure analysis and engineering evaluations
• Maintain proper inspection records and controlled documentation
• Support laboratory housekeeping and cleanroom compliance activities
• Perform other QA-related duties assigned by management

Requirements:
• Minimum GCE ‘O’ Levels or equivalent
• Experience in semiconductor / electronics manufacturing environment preferred
• Familiar with microscope inspection and QA tools
• Basic knowledge of ISO 9001 / ISO 14001 quality systems is advantageous
• Comfortable handling documentation and reporting duties
• Strong attention to detail and quality mindset

Working Hours:
Monday – Friday
7:30 AM – 4:30 PM

Break Time:
• Lunch: 11:30 AM – 12:30 PM
• Tea Break: 2:30 PM – 2:45 PM

Benefits:
• AWS (13th Month Bonus)
• Variable Bonus
• Overtime Pay (according to MOM regulations)
• Annual Leave starting from 12 days
• Career progression opportunities

Additional Information:
• Stable Monday–Friday schedule
• Cleanroom working environment
• Exposure to both R&D prototype and manufacturing support operations
• Future night shift support may be required depending on operational needs

EA License No: 23C1703
EA Personnel No: R1762582
EA Personnel Name: Wong Choo Sian, Jabez

Job Responsibilities:

·       Lead and manage the purchasing system for QC, including:

·       Ordering stationery and non-laboratory items from the Com-office.

·       Raising Purchase Requisitions (PRs)for laboratory consumables, chemicals and services.

·       Coordinating with vendors for quotations, delivery schedules, and invoicing. 

·       Receive incoming items and verify against Delivery Orders; perform stock-taking as required.

·       Act as the main point of contact between QC and the Warehouse.

·       Transfer reagents to the fridge/freezer from the interim warehouse when necessary.

·       Receiving of materials in Cisprosystem

·       Creation of static data for chemical/column in Cispro

·       Print and issue logbooks.

·       Reviewing of logbooks.

·       Handle document archival activities, including scanning and submission to QA.

·       Serve as back up for Training Coordinator — manage the addition and removal of job code(s).

·       Aliquoting of sample using pipette

·       Packing of raw materials, excipients and Packaging component for overseas shipment

·       Housekeeping and 5S in the laboratory

·       Any other work assigned by the supervisor

Job Requirements:

·       Diploma in any field

·       Proficient in Microsoft Word, Excel, PowerPoint, Power BI, etc

·       Meticulous

·       Strong organizational abilities,

·       Excellent verbal/written communication.

·       Ability to prioritize tasks, meet deadlines, and handle multitasking.

Contract Duration: 12 months, subject to renewal based on performance.

• Reporting to General Manager and establish quality strategies and policies; implement World-Class quality engineering and validation tools and systems.
• Manage Quality Assurance systems and activities in partnership with other key functional groups to ensure reproducible product quality and compliance.
• Oversee Quality System management, production & mold manufacturing quality controls and project qualification activities.
• Support Program Manager in executing project implementation.
• Plan and execute quality control activities; organize QA staff according to work requirements, ensuring manufacturing effectiveness and efficiency.
• Ensure compliance to all applicable quality systems.
• Plan and lead in company-wide training initiatives for quality system and QA activities.
• Provide interface to customers' Quality Compliance organization to ensure that project team complies with customers' requirements.

Requirements:

• Diploma/Degree in Quality Engineering or related fields.
• At least 5 years of relevant experience in quality management systems in a manufacturing environment. Understands ISO certification procedure and experiences in plastics/mold making industry advantageous
• Certified Quality Manager, lead Auditor in ISO 9000 or 14000
• Good knowledge and experience in GD&T, ISO 9001, and ISO 13485 QMS
• Independent, good initiative and able to multi-task in fast paced environment
• Position will be based in Northern Europe Office
• Monthly salary + housing allowances and variable bonus.

We invite interested and qualified candidates to send in your updated resume (MS WordFormat), stating your reasons for leaving each employment, your current and expected salary to theresa@personnellink.com.sg. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality.

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Our client is a global MNC that manufactures and supplies specialty coatings, treatments, and chemicals. Due to business needs, they are now recruiting a Quality Control Technician to be part of their team for ongoing transformation projects. They are located in the West.

The Quality Control Technician will be responsible for:

Supporting the company's quality control operations by conducting product testing and inspection activities to ensure products meet established quality standards and manufacturing requirements.

• Perform daily quality control testing to support manufacturing operations, incoming inspections, and recurring inspections.
• Assist in product quality investigations, including root cause analysis of customer complaints and production rejects, by reviewing records and conducting stability studies.
• Support continuous improvement initiatives and quality assurance objectives, including First-Time Right and manufacturing performance targets.
• Assist in maintaining the ISO 9001 Quality Management System through documentation control, internal audits, and adherence to good laboratory practices.
• Maintain compliance with company quality, safety, and workplace health policies and procedures.
• Carry out other duties related to quality control and laboratory operations as assigned.

Job Requirements:

• NITEC, Diploma, or an equivalent qualification in Chemistry, Chemical Technology, or a related discipline.
• Relevant experience in a quality control or laboratory environment within the chemical manufacturing industry is preferred.
• Experience operating laboratory equipment such as Gas Chromatographs (GC), Differential Scanning Calorimeters (DSC), Autotitrators, and Karl Fischer Titrators is an advantage.
• Basic computer literacy and attention to detail are advantageous.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R25157612 (Lim Yong Kang)

Quality Manager

We are seeking a Quality Manager to lead the company's Quality Management System (QMS) and ensure products, processes, and operations consistently meet customer, regulatory, and internal quality requirements. The role will oversee quality assurance and quality control activities, drive continuous improvement initiatives, and support customer and certification audits.

Key Responsibilities

• Manage and maintain the company's Quality Management System in accordance with ISO 9001 and ISO 13485 requirements.

• Lead the QA team and oversee incoming, in-process, and outgoing quality activities.

• Ensure products meet customer specifications, drawings, and quality standards.

• Investigate quality issues and drive effective corrective and preventive actions.

• Handle customer complaints, quality concerns, and audit requirements.

• Plan and conduct internal audits, management reviews, and continuous improvement initiatives.

• Work closely with Production, Engineering, and Project teams to improve process capability and product quality.

• Monitor quality performance metrics and implement actions to reduce defects and customer complaints.

• Manage calibration systems and ensure compliance of measuring equipment.

• Support supplier quality management and new product introduction activities.

Key Skills & Requirements

• Strong knowledge of ISO 9001 and ISO 13485 Quality Management Systems.

• Experience in quality management within a manufacturing environment, preferably plastic injection molding.

• Familiarity with quality tools such as 8D, FMEA, Root cause analysis etc.

• Strong leadership, communication, and problem-solving skills.

• Experience managing customer audits, certification audits, and quality documentation.

MiRXES is a Singapore-headquartered molecular diagnostic company with R&D, manufacturing, and clinical lab operations in Singapore, USA, Japan, and China. We specialize in microRNA technologies and the development, manufacturing, and provision of diagnostic test kits and clinical services. Our mission is to enable early disease detection and provide insights for better patient care by harnessing the power of microRNA to augment traditional testing. Our vision is to be the world’s leading developer and provider of accurate, actionable, and affordable microRNA-powered diagnostic tests.

Job Location: Tukang

Job Summary:

The QC Specialist will work as part of the Quality team, supporting day-to-day QC operations and maintaining accurate and detailed records of all the assigned tasks. This role involves inspecting products at various stages of the manufacturing process, including incoming raw materials, intermediates, in-process materials and finished goods. The role will also participate in investigations of nonconforming products and assist in implementing corrective actions arising from these inspections.

Roles and Responsibilities

• Perform routine QC testing of incoming raw materials, in-process materials and finished goods.
• Plan and schedule daily routine and ad hoc QC runs assigned by line manager.
• Evaluate data and generate reports, highlighting any deviations from standard operating procedures (SOPs).
• Raise nonconformances for failures observed during QCruns.
• Support troubleshooting and investigation of nonconformancesto determine root causes.
• Draft and revise QC work instructions as required.
• Support validation and stability studies for lab development and Diagnostic products, when necessary.
• Perform general laboratory support activities, including housekeeping, equipment maintenance, document archival, and inventory tracking of laboratory reagents, etc.
• Contribute to the continuous improvement of laboratory procedures and processes to ensure compliance with GMP requirements.
• Apply Good Documentation Practices (GDP) to all records to ensure traceability, transparency, and audit readiness.
• The tasks and responsibilities listed are essential to the role, however, reasonable accommodations may be made to support additional responsibilities based on evolving business needs.

Desired Skills and Competencies

• Degree/ Diploma in Biomedical Science, Biotechnology, Molecular Biology, Biochemistry, Life Science related courses or equivalent.
• Knowledge and hands-on experience with qPCR, including operation of qPCR machines will be an advantage.
• Proficient in using standard laboratory equipment such as pipettes, centrifuges, etc.
• Familiar with basic laboratory procedures; experience in assay-based workflows and QCtesting is an advantage.
• Able to work independently with minimal supervision, as well as collaboratively with cross-functional teams.
• Excellent organizational and time management skills.
• Demonstrate a high degree of initiative and ownership.
• Possess a positive, proactive and willing-to-learn attitude.
• Strong interpersonal and communication skills.
• Basic computer competency, including proficiency in Microsoft Office applications.
• 2-3years of relevant experience in quality control, preferably within the medical device manufacturing industry.
• Good understanding of Good Documentation Practices (GDP) and current Good Manufacturing Practices (cGMP) is preferred.

This position is based in Singapore.

We appreciate your interest in the above-mentioned position, however, only shortlisted candidates will be contacted.

To operate in a structured work environment

· Undertakes specific stages of audit workundersupervision by the Audit Senior

· Begins to appreciate the underlyingprinciples behindthe tasks assigned as part of the audit plan

· Obtain audit evidence to corroborateinformation

· Perform quality audit in compliance withprofessionalstandards.

· Able to make adjustments to the applicationof skillsto improve the work tasks or solve non-complex issues

· Able to build relationships, work in a teamandidentify ethical issues with reference to the code of professional conductandethics

· Able to select and apply from a range ofknownsolutions to familiar problems and takes responsibility for own learningandperformance.

REQUIREMENTS

· Diploma / Degree in Accountancy, ACCA orequivalent

· Minimum 1 year of experience. Entry levelare welcometo apply.

· Execute assigned audit tasks undersupervision

· Good communication and writing skills

· Able to communicate well with people of alllevels

· Able to work independently and handle stressundertight deadlines with commitment

· Good command in English

· Proficient in Microsoft Excel and Work

· Act in accordance with applicableprofessionalstandards

· Knowledge of Caseware Audit Software will bean addedadvantage.

KEY RESPONSIBILITIES

• Manage assurance engagements by defining theaudit strategy in consultation with the director / partner and execute itincompliance with the firm’s policies and protocols. When required, you’llpersonally execute complex audit procedures and lead teams or parts of teams onengagements, depending on the size of the engagement.

• Manage projects and engagements profitablyby leading the team to perform efficiently.

• Monitor the assurance team's progressagainst the plan and alter it when needed.

• Cultivate and manage business developmentopportunities. Generate new business opportunities by understanding theservices provided by our sister concerns and actively assess/present ways toapply knowledge and services.

• Conduct timely performance reviews and provideperformance feedback/on-the-job training and attain experiences that cultivatetechnical competencies.

• Develop people by encouraging individuals tothink for themselves and take responsibility for their contributions to the assuranceteam.

• Conduct timely performance reviews and provideperformance feedback/on-the-job training.

• Maintain cooperative relationships withother assurance teams

• Develop and maintain long-term productive clientrelationships and networks.

SKILLS AND ATTRIBUTES

• Work effectively as a team member, sharingresponsibility, providing support, maintaining communication, and updatingsenior team members on progress.

• Contribute ideas/opinions to the assuranceteams and listen/respond to other assurance team members' views.

• Demonstrate professionalism and competencein the audit client’s environment.

• Cultivate and manage business developmentopportunities. Generate new business opportunities by understanding the servicesprovided by our sister concerns and actively assess/present ways to applyknowledge and services.

• Good project management skills.

• Integrity within a professional environment.

Demonstrate professionalism and competence inthe audit client’s environment.

• Bachelor's degree in Accounting, Finance, ora related field.

• Obtained or in the final stages of obtainingCPA Singapore qualification.

• Working knowledge of CaseWare audit softwarea strong advantage.

• At least 3 years of related work experience Inamanagerial

Responsibilities:

• Provide technical installation for on-site installation and online calls.
• Provide on-site service and support to customers; not limited to local customers. For instance, problem verification, solution, and checking defective items to investigate and repair. 
• Set up, configure, and commission our products for customers.
• Handles technical inquiries and requests for quotations on technical services.
• Produce relevant reports for all work relating to on-site problems such as root cause analysis, service report, commissioning report, etc. 
• Handle customer service calls on defective products and preventive maintenance.
• Support the sales team in providing technical solutions to meet customers' needs.
• In addition to these duties/responsibilities, employees are required to carry out such duties as may reasonably be required.

To succeedin this role, you will need:

• Diploma in Engineering or related fields
• Minimum 1-3 years of sales experience in M&E, control & automation industry.
• Mature, self-disciplined and results-driven.
• Clear presentation ability with excellent communication skills.
• Strong interpersonal skills and customer focus to establish positive relations.

Key Responsibilities

• Maintain and control project documents, drawings, quality records, and correspondence.
• Ensure the latest approved documents are distributed to relevant project teams.
• Prepare, update, and monitor Inspection & Test Plans (ITP), inspection records, and document registers.
• Coordinate inspections with clients, consultants, and project teams.
• Monitor NCRs, corrective actions, material approvals, warranties, and test certificates.
• Conduct site quality inspections to ensure compliance with project specifications and approved drawings.
• Attend project meetings, prepare meeting minutes, and follow up on action items.
• Maintain proper filing and archiving of project records upon project completion.

Requirements

• Diploma in Construction, Engineering, Building, or equivalent qualification. Minimum 3 years of relevant experience in construction projects.
• Knowledge of QA/QC documentation and document control processes, including ITPs, WIRs, MIRs, NCRs, material approvals, and quality records.
• Familiar with construction drawings and specifications.
• Proficient in Microsoft Office applications and document management systems.
• Good communication, organizational, and report-writing skills.
• Ability to prepare meeting minutes and coordinate project documentation.

QC INSPECTOR (Electronic Components)

Job Descriptions
►  Responsible to inspect in coming parts
►  Must know how to read component datasheet
     and search various website to find component datasheet
►  Inspect product under magnification to validate markings product
► Take physical measurements of product to ensure authenticity  
► Confirm Rohs/Lead Free compliance via part markings, date codes  
► Take photos, creating and writing test report

Qualification Requirement
► Higher Nitec in Electronic Engineering
►  Need to work with QA team and Receiving
►  Initiative, independent & team player
►  Willing to be hands-on and interactive

Environment
·      Product training will be provided
·      5 days’ work from 8.30am to 5.30pm
·      Location at Kaki Bukit Crescent
. Staff Welfare: Medical/Insurance/Dental/Eyewear/Birthday etc....

Interested applicants please email detailed resume including salary expectation to dshresource@yahoo.com.sg

                            Please note that only shortlisted candidates will be notify.

Job Responsibilities:

•            To support laboratory operations(not limited to) e.g., filing/archival, receipt of media, autoclaving of consumables

•            To support LIMS/LES coordinator roles

•            To perform check for documentation completeness for basic instruments, equipment or testing/calibrations

•            To perform cleaning and disinfection of laboratory instruments, controlled temperature units and equipment

•            To perform, preventative maintenance of laboratory instruments/equipment

•            To manage microbiological inventory required for sampling and testing

•            To ensure adherence to ALCOA principles for managing laboratory data

•            To adhere to site/job role training plan, and maintain individual training records

•            To support continuous improvement initiatives

•            To maintain laboratory housekeeping using 5S approach

•            Ensure timely escalation of investigations accidents, near misses and breaches of policies

•            To carry out tasks required by the reporting Manager

Job Requirements:

·       Diploma in Life Science, Process Technology, Pharmaceutical Sciences or equivalent.

·       1-2 years of experience in the pharmaceutical or medical devices industry, with experience on working in a laboratory environment preferred.

·       Candidates who do not fulfill the education background but possess laboratory experience can be accepted.

·       Fresh graduates with positive attributes will be considered.

·       Possess basic laboratory skills such as pipetting, glassware management and laboratory safety.

·       Have GMP manufacturing knowledge.

·       Basic proficiencies in digital literacies such as Microsoft Word, Excel, PowerPoint

·       Ability to work independently and follow critical timelines

·       Ability to adapt to a changing work environment

·       Effective interpersonal skills at all internal and external levels

·       Excellent attention to details

·       Good time management and project management skills

Contract Duration: 12 months, subject to renewal based on performance.

Duties & Responsibilities

Responsibilities

• Maintain and control project documents, drawings, quality records, and correspondence.
• Ensure the latest approved documents are distributed to relevant project teams.
• Prepare, update, and monitor Inspection & Test Plans (ITP), inspection records, and document registers.
• Coordinate inspections with clients, consultants, and project teams.
• Monitor NCRs, corrective actions, material approvals, warranties, and test certificates.
• Conduct site quality inspections to ensure compliance with project specifications and approved drawings.
• Attend project meetings, prepare meeting minutes, and follow up on action items.
• Maintain proper filing and archiving of project records upon project completion.

Requirements:

• Diploma in Construction, Engineering, Building, orequivalent qualification. Minimum 3 years of relevant experience inconstruction projects.
• Knowledge of QA/QC documentation and document controlprocesses, including ITPs, WIRs, MIRs, NCRs, material approvals, and qualityrecords.
• Familiar with construction drawings andspecifications.
• Proficient in Microsoft Office applications and document management systems.
• Good communication, organizational, and report-writing skills.
• Ability to prepare meeting minutes and coordinate project documentation.