Total 1,241 quality control engineer job vacancies in Quality Assurance / Control category

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

To ensure the quality, functionality and reliability of a product before it released to the customer by identifying and diagnosing defects and issues

Key Responsibilities

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.
• Have knowledge on ATE tester platform e.g Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX & LTX tester

We are seeking a Supplier Quality Engineer (SQE) with strong expertise in plastic injection tooling & molding processes. The ideal candidate will have hands-on experience in defining, optimizing, and validating molding parameters, reviewing and approving tooling designs, selecting appropriate resin materials, and diagnosing process-related defects. This role will work closely with suppliers to ensure robust, stable, and capable manufacturing processes from tool design through mass production.

Key Responsibilities

- Responsible for supplier quality plastic injection molded components from development through mass production
- Review, evaluate, and approve tooling design (mold design) together with Engineering team to ensure manufacturability, quality, and process robustness
- Collaborate with Engineering & suppliers on mold flow analysis, gate location, cooling layout, venting, and shrinkage considerations
- Evaluate and approve supplier injection molding processes, including parameter setup and process controls
- Determine and validate optimal molding parameters
- Lead root cause analysis and corrective actions for molding defects (e.g., sink marks, warpage, short shots, flash, burn marks, cracks, breakage)
- Assess and ensure correct resin material selection based on product requirements and application
- Conduct supplier audits focusing on molding process capability, tooling condition, and quality systems
- Drive continuous improvement initiatives with suppliers to enhance yield, reduce variation, and improve process stability
- Responsible for review and approve PPAP, FMEA, Control Plans, and SPC data from suppliers.

Technical Requirements

- Strong knowledge of plastic injection molding processes and tooling design principles
- Experience in tool design review , including:
  • Gate type and location selection
  • Runner system (hot runner / cold runner)
  • Cooling channel design and effectiveness
  • Venting and air traps
  • Ejection system design
  • Shrinkage and warpage considerations

- Deep understanding of critical process parameters:
  • Melt temperature, mold temperature
  • Injection speed and pressure
  • Holding/packing pressure and time
  • Cooling time and cycle optimization etc

- Ability to determine process windows and understand parameter variation impact
- Experience diagnosing molding defects and linking them to root causes
- Knowledge of resin materials (ABS, PC, PP, Nylon, etc.)
- Familiarity with scientific molding, decoupled molding, and/or DOE

As an Quality Inspector, you’ll be reporting to Inspector Team Leader or Operations Manager and working as part of our Operations department. The purpose of QIMA’s Operations team is to deliver our industry-leading services to our clients while ensuring that all the work we do is performed to the QIMA standard of quality.

Your main duties will revolve around on-site quality inspections of our clients’ products.

• Check email daily to receive inspection documents.
• Attend to inspections on time and communicate with supplier in a professional way.
• Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures.
• Fulfill inspection reports according with company procedures and timelines.

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

As a member of the SSD Quality & Reliability Engineering team, you will leverage your expertise in project and program management, risk management, conflict resolution and quality standards & best practices. You will collaborate closely with cross-functional teams and engage with key stakeholders, including Program Management, Customer Management, Marketing, Manufacturing, and Engineering, to ensure the successful execution of quality and reliability initiatives.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Represent product quality as the Sustaining Program Manager in core teams, ensuring alignment with quality and reliability goals throughout the product lifecycle.
• Accountable for product quality and reliability when product transitions into sustaining phase. Drive activities to ensure that product quality & reliability expectations are met.
• Lead the resolution of quality-related issues during both New Product Introduction (NPI) and Sustaining phases.
• Communicate quality excursions to executive management and core teams.
• Lead crisis processes, driving closure through risk assessment, containment actions, 8D root cause analysis, CAPA, and lessons learned.
• Collaborate with NPI counterparts to ensure seamless product transition into Sustaining, meeting all product, customer, and regulatory requirements.
• Participate in new product kick-off reviews and Manufacturing Readiness Reviews (MRRs).
• Coordinate with other QAPMs/SMEs to share lessons learned and support continuous process improvement across programs.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for product development and high volume SSD manufacturing is desired.
• Perform manufacturing yield evaluation and data analysis for yield improvement.
• Responsible for prepare, validate and release test package to Agile system.
• Responsible for Failure Analysis of products to meet yield goals and quality targets.
• Interfaces with core team (FW/HW) as well as internal team to solve problems.
• Ability to work with various departments to facilitate the orderly execution of a proposed project plan.
• Participate & contribute in tester/infrastructure and process improvements.
• Ability to read the electrical schematic diagram is an advantage.
• Work closely with departments within the company to ensure product able to meet the delivery timeline.
• Ability to work independently with minimum supervision. 
• Ability to provide guidance to teammate.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

Rentokil Initial adalah sebuah syarikat perkhidmatan perniagaan antarabangsa yang mempunyai lebih dari 68,500 rakan sekerja di 90 buah negara.

Kami berusaha untuk melindungi orang ramai dan meningkatkan taraf kehidupan yang lebih baik, contohnya dengan mengawal makhluk perosak dan meningkatkan mutu kebersihan.

Kami pakar dalam bidang kami dan melabur dalam latihan, sains, inovasi dan teknologi.

Mendengar dan bertindak di atas maklum balas adalah sebahagian daripada budaya kami untuk menyokong rakan sekerja dan pelanggan kami. Rentokil Initial menganggap kesetaraan dan keadilan adalah hak asasi semua rakan sekerjanya.

Kami terapkan nilai-nilai Perkhidmatan, Hubungan dan Kerja berpasukan yang kami telah tanam ke dalam diri rakan-rakan sekerja kami di seluruh dunia.

Ketahui dengan lebih lanjut di careers.rentokil-initial.com

Dalam peranan ini, anda akan bertanggungjawab untuk:

• Melakukan servis kawalan makhluk perosak seperti semburan, pewasapan, dan pemasangan perangkap untuk menghapus dan mengawal pembiakan lipas, semut, anai-anai, nyamuk, tikus, lalat, kekaltu, dan haiwan-haiwan perosak yang lain.
• Memberi sokongan kepada Penyelia dan pasukan dalam pelaksanaan tugas.
• Membina dan mengekalkan hubungan yang baik dengan pelanggan-pelanggan.
• Memberi laporan yang betul dan tepat pada masanya apabila diarahkan oleh Penyelia.
• Tugas-tugas lain yang berkaitan dengan pekerjaan yang mungkin diberikan kepada anda dari semasa ke semasa.

SEMUA JANTINA DARI PELBAGAI BANGSA ADALAH DIGALAKKAN UNTUK MEMOHON JAWATAN INI

Calon yang ideal memiliki:

• Kelayakan pelajaran sekurang-kurangnya tahap SPM. Sijil SPM dan Sijil Tamat Sekolah versi asal (original) diperlukan untuk memohon jawatan ini.
• Warganegaraan Malaysia.
• Berumur antara 21 dan 35 tahun (36 tahun ke atas masih boleh dipertimbangkan sekiranya mempunyai pengalaman di dalam industri Pest Control).
• Mempunyai lesen B2, D, dan GDL yang sah.
• Mempunyai lesen Pesticide Applicator (PAL).
• Minat melakukan kerja servis dan kerja luar (outdoor).
• Menetap di kawasan berdekatan.

Sangat Diingini Jika Anda:

• Mempunyai pengalaman dalam bidang Pest Control.
• Berdisiplin dan mampu mematuhi semua polisi dan dasar Syarikat.
• Boleh bekerja lebih masa.
• Berupaya untuk berbahasa Melayu dan juga memahami bahasa Inggeris mudah (penulisan dan percakapan).
• Boleh menggunakan telefon pintar dan celik IT/teknologi.

Ganjaran dan Faedah

• Gaji pokok yang menarik, pelbagai jenis elaun dan insentif (bergantung kepada prestasi anda).
• Kad petrol disediakan.
• Faedah rawatan pesakit luar.
• Caruman KWSP, PERKESO & SIP.
• Pakaian seragam percuma (baju, seluar, topi, t-shirt, sarung kaki, kasut keselamatan, dan alat keselamatan kerja).
• Telefon bimbit dan/atau kad sim untuk kegunaan kerja (bagi yang berkelayakan).
• Pelbagai anugerah berkenaan kecemerlangan kerja, aktiviti korporat, dan inisiatif untuk kebajikan pekerja.

Anda akan dialu-alukan oleh rakan-rakan sekerja yang ramah, mantap, berdaya saing, bermotivasi tinggi, dan fokus untuk mencapai matlamat dan hasil.

Jadi, tunggu apa lagi? Ayuh, mari sertai pasukan kami dengan MEMOHON SEKARANG!

Peluang Sama Rata

Rentokil Initial percaya dalam menyokong semua pekerja dengan menyediakan peluang yang sama dan mengelakkan diskriminasi. Kami juga memberi penekanan kepada kepelbagaian di tempat kerja. Ini bermaksud, kami serius untuk mewujudkan persekitaran yang inklusif yang menerima perbezaan setiap individu, menghargai kekuatan mereka dan memberikan peluang kepada semua rakan sekerja untuk mencapai potensi penuh mereka. Adakah anda ingin menyediakan perkhidmatan profesional yang bernilai untuk komuniti anda? Adakah anda yakin yang anda mampu melakukan kerja ini dengan baik? Mohonlah hari ini!

Lokasi cawangan ini:

Rentokil Initial (M) Sdn Bhd

Cawangan Klang Valley (Pest Control)

Rentokil Initial (M) Sdn Bhd. No. 7 Jalan Utarid U5/13, Seksyen U5, 40150 Shah Alam

(Harap maklum, pejabat operasi cawangan ini terletak di Shah Alam, manakala kawasan servis adalah di sekitar Kuala Lumpur & juga Selangor)

Lead the Quality Assurance process to ensure the achievement of quality compliances and customer satisfaction. Provide Quality Assurance support and coordinate in resolving potential issues.

Key Responsibilities

• Facilitate Customer Quality Issues and Internal Quality issues to drive Corrective & Preventive Actions.
• Facilitate Quality Planning Process [PFMEA, Control Plan, Measurement System Analysis, Quality Gate] for new process setup.
• Monitor Quality KPIs and coordinate Continuous Improvement activities.
• Analyze, compile, review Quality Metrics, and timely communication to stakeholders.
• Perform Quality Audits to ensure compliances, process effectiveness, and elimination of Quality Risks.
• Coordinate Change Control, RMA, SPC implementation and Quality Training activities 

ABOUT US

As Southeast Asia's #1 integrated logistics provider, Teleport is all about making logistics fast, affordable and reliable. Our mission? To move things across Southeast Asia better than anyone else. We're focused on making next-day delivery a reality for all.

#TeamTeleport is guided by our values : Move with urgency because time is crucial; Aim to pioneer — constantly innovating to stay ahead; Do it with intent — delivering with purpose and precision; and Keep it real — maintaining authenticity and transparency in all we do.

Learn more about Teleport here: https://www.teleport.it/

Main Responsibilities (Project 1) : 3PL Partnership Audit

1. Audit Documentation Management

• Collate, scan, and index all official correspondence (emails/letters) related to the audit.

2. Audit Calendar & Logistics

• Schedule and send reminders for audit team meetings and follow-up sessions with 3PL stakeholders.

3. NCR and Finding Log Admin

• Transfer handwritten/initial audit findings (Non-Conformance Reports - NCRs) into the master digital log.

Main Responsibilities (Project 2) : Integrated Management System (IMS) (ISO 9001, 45001, 14001)

1. Calendar Management

• Ensure manage calendar for all matters related IMS discussion.

2. Records Retention Tracking

• Conduct housekeeping of records, ensuring retention periods for QA/Safety/Environment records are tracked and met.

3. Compliance Register Admin

• Assist in updating the master list.

Main Responsibilities (Project 3) : CTO Audit

1. Audit Records Housekeeping

• Responsible for the end-to-end documentation management of all audit records: collating, scanning, and indexing the audit report, audit notification, audit evidence (site visit photos, checklists), and follow-up communication.

2. Calendar Management

• Manage the official audit calendar, scheduling key meetings, site visits, follow-up reviews, and internal prep sessions, ensuring zero conflicts.

3. Evidence Traceability

• Create and maintain a simplified matrix linking specific audit findings to the corresponding piece of stored evidence (e.g., linking a finding to a specific file path and document version).

Qualifications :

These are minimum-requirement skills and a ‘must-have’ for the role :

• Pursuing or completed a Diploma/Degree in Business Administration, Logistics, Quality Management, or a field with a strong data/IT component.
• Proficiency in Google Office, Microsoft Office (Excel, Word), Intermediate-level Excel, strong organizational skills, and excellent attention to detail.
• Available for a minimum internship period of 6 months (6–12 months preferred).
• Good written and spoken English proficiency.
• Strong sense of responsibility, discipline, and work ethic.
• Willingness to learn and follow structured procedures.
• Ability to manage multiple basic tasks and timelines effectively.
• High attention to detail and accuracy.

At Teleport, we’re all about creating a diverse and inclusive team where everyone feels valued. We believe that different perspectives make us stronger and help us do logistics better across Southeast Asia. We welcome people from all walks of life and celebrate what makes each of us unique. If you’re passionate about making a difference, we’d love to hear from you!

As a QA Engineer you will be supporting the development teams by ensuring the quality of their output through a combination of manual and automated testing.

Who we are

Trade Nation is a global CFD and spread betting broker. We help traders make better decisions through clear market insights, transparent pricing and fairer approach to trading.

Since 2014, we’ve grown into a market-leading, low-cost broker with our headquarters in London and offices across Europe, South Africa, Asia-Pacific, and key offshore regions including the Caribbean and Indian Ocean. Our platform is available in 14 languages, making it accessible to traders worldwide.

Built on transparency and trust, and driven by our people, our focus is simple: helping customers trade more effectively. We do that by keeping costs low, cutting unnecessary complexity and using technology to put traders first.

Your team

Our Kuala Lumpur office is a bright, modern space located at the heart of the city. The team here is expanding, making it our second-largest hub, and we’re excited to welcome like-minded individuals to join an exciting, collaborative environment filled with professionals who have a passion for innovation and driving change.

Our commitments to each other

We have each other’s backs

There when we need each other most

 We challenge each other

Be more creative, more curious, more bold

We thrive together

Taking our work to the next level

We form strong bonds

Through team building and social events

We don’t judge

Instead, we teach and are open to learning

We step up

Taking ownership and supporting each other to do the same

Key Responsibilities:

• Collaborating with cross functional teams to understand product features and architecture.
• Deriving meaningful test scenarios based on business requirements and system workflows.
• Performing functional, regression, integration and end-to-end testing on tasks and epics.
• Developing and maintaining an up-to-date regression pack to ensure ongoing testing of critical functionalities.
• Writing, executing, and maintaining test cases for automation.
• Assisting in bug reproduction, investigation and work with developers on root cause analysis.
• Maintaining test scripts to run in CI/CD environment.
• Promoting delivery of quality software.
• Communicating effectively on progress and ensure impediments are raised early to minimise impact on the delivery.

• Proven experience in quality assurance across automated and manual testing within software development with at least 3+ years of experience.
• Should have 2+ years’ experience in front-end, API and end-to-end testing.
• Develop and maintain automated scripts using tools like Playwright, Cypress, K6 and Postman.
• Strong preference for experience in scripting language such as TypeScript, JavaScript.
• Skilled in using CI/CD tooling such as GitLab, TeamCity etc
• Experience using Jira or similar project management tool.
• Maintain and enhance test documentation including test scenarios and bug reports.
• Excellent attention to detail, highly organised with a proactive and independent approach.
• Capable of working on multiple tasks simultaneously and managing deadlines.

Preferred Qualifications

• Relevant testing qualifications such as ISTQB, Agile software testing courses.
• Experience with Playwright using Typescript language.
• Experience in API testing using Postman or similar tools.
• Good to have knowledge in C#
• A positive attitude with the ability to work independently and as part of a team.
• Knowledge of Agile methodologies and experience working in an agile environment.