Total 831 qa engineer job vacancies in Quality Assurance / Control category

We are looking for a QA Supervisor to oversee quality control activities on the production floor and ensure all plastic injection molded parts meet customer and internal requirements. This role involves managing inspectors, handling quality issues, and working closely with production to maintain consistent standards.

Key Responsibilities

1. Ensure products meet drawing specifications, tolerances, and customer requirements

2. Supervise and guide QA inspectors on daily inspection activities (incoming, in-process, outgoing)

3. Review and approve first article, in-process, and final inspection results

4. Handle non-conformance issues, including containment, investigation, and corrective actions

5. Work with production and engineering teams to resolve quality issues and prevent recurrence

6. Monitor and maintain quality records, inspection reports, and documentation

7. Support customer requirements such as audits, complaints, and quality submissions (e.g. PPAP if required)

8. Ensure proper use and calibration of measuring equipment

9. Train and coach QA staff on inspection methods and quality standards

10. Maintain housekeeping and compliance with safety and quality procedures
    
    Key Skills

    • Attention to detail and consistency

    • Problem-solving and root cause analysis

    • Communication and team supervision

    • Able to handle shop floor situations and work under pressure

Job Description

• Support QA / QC activities to ensure product quality and compliance requirements are met.
• Review quality records, test results, inspection reports and production documents.
• Assist in handling non-conformance, customer complaints, investigation and CAPA.
• Support internal audits, external audits and quality system implementation.
• Maintain SOPs, quality documents, reports and compliance records.
• Coordinate with production, laboratory, warehouse and engineering teams on quality matters.
• Monitor quality performance and follow up on improvement actions.
• Supervise or guide junior staff on laboratory / quality activities when required.

Requirements

• Diploma / Degree in Chemistry, Chemical Engineering, Food Science, Biotechnology, Pharmaceutical Science, Quality Management or related field.
• Experience in QA / QC / quality assurance / quality control / laboratory supervision will be an advantage.
• Candidates from chemical, manufacturing, food, pharmaceutical, polymer or industrial background are welcome.
• Knowledge of ISO, GMP, SOP, audit, CAPA, NCR or quality documentation is preferred.
• Good documentation, communication and problem-solving skills.
• Able to work independently and coordinate with different departments.
• Candidates with supervisory experience may be considered for senior roles.

-------------------------------------------------------------------------------------------------------------------------------------------------

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability. Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

By sending your job application/resume to us, it shall bedeemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Bernard Pang
EA Personnel Reg No.: R24119695

Job Description

• Lead and manage Quality Assurance and Food Safety operations across multiple food manufacturing facilities.
• Maintain and continuously improve the Food Safety Management System (FSMS), ensuring compliance with ISO 22000, Halal, SFA, customer, and regulatory requirements.
• Lead internal and external audits, certifications, and regulatory inspections, ensuring audit readiness and timely closure of findings.
• Conduct site inspections of production to ensure compliance with food safety, quality and hygiene standards.
• Drive investigations and corrective actions for customer complaints, non-conformances, and food safety incidents.
• Oversee supplier qualification, raw material approval, and quality compliance programmes.
• Ensure effective implementation of GMP, HACCP, hygiene, sanitation, and quality control programmes across operations.
• Collaborate closely with the Production team and provide operational support when required to ensure efficient and compliant manufacturing operations
• Support new product development and regulatory compliance initiatives, including HPB, HCS, and Nutri-Grade requirements.
• Serve as the key point of contact for food safety, quality, regulatory, and compliance matters, reporting directly to the Director and General Manager.
• Any other duties assigned by the Management

Job Requirement

·        Possess at least a Diploma in Food Technology,Food Science, Food Nutrition or equivalent.

·        Minimum 5 years working experience in related field.

·        Relevant knowledge in FSSC, ISO 9001, ISO 22000,GMP, HACCP.

·        Knowledge of tools, concepts and methodologiesof QA.

·        Proficient in Microsoft Word, Excel andPowerPoint.

·        Able to work independently, as well as a teamplayer.

·        Working day pattern: 5 days, 8 hrs per week.

·        Location: Senoko or Woodlands area

Note: We offer lunch meal.

If interested, please send your resume to WhatsApp @ +65 9112 1178

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Step into a career with ASM, where cutting edge technology meets collaborative culture. ​

For over 55 years ASM has been ahead of what’s next, at the forefront of innovation and what’s technologically possible. With more than 4,500 ASMers representing 70 nationalities, our people and our advanced semiconductor devices are playing a crucial role in trends such as 5G, cloud computing, AI, and autonomous driving.  But we’re more than just a tech company. We value diversity, inclusion and sustainability as we strive to make a positive impact on the world.  Our development programs help support your growth, shaping your future and pushing the boundaries of innovation to unleash potential.  

Job's mission

As a Senior Engineer, Supplier Quality within ASM’s Global Quality team, you play a key role in ensuring manufacturing excellence across internal sites and contract manufacturers. Working closely with engineering, manufacturing, and field service teams worldwide, you help resolve complex quality issues, drive continuous improvement, and strengthen quality systems aligned with ASM’s technology roadmap. Your work directly contributes to customer satisfaction, product reliability, and operational excellence in high‑tech manufacturing environments.

What you will be working on

• Create detailed and well‑structured inspection plans, partnering with cross‑functional teams to improve assembly processes, testing, and product quality.
• Lead customer escalations and feedback, working with manufacturing sites, contract manufacturers, and field teams to define clear problem statements.
• Investigate non‑conformances using structured problem‑solving methodologies, including 8D, and implement corrective and preventive actions to prevent recurrence.
• Prepare clear and comprehensive quality reports for internal stakeholders, including field service teams.
• Identify manufacturing gaps with internal teams and contract manufacturers, driving corrective actions and systematic continuous improvement.
• Track, analyze, and report quality metrics, recommending actions to achieve defined quality targets.
• Conduct product and process audits prior to shipment to ensure compliance with customer and quality requirements.
• Manage onsite customer audits and ISO certification audits at manufacturing sites, following up on action items through closure.
• Perform periodic ISO 9001 audits at contract manufacturers and ensure timely CAPA implementation.
• Measure contract manufacturer performance through monthly quality metrics and quarterly scorecards.

What we are looking for

• Bachelor’s degree in Mechanical, Electrical, Electronic, or Quality Engineering, or a related engineering discipline.
• Minimum 5 years of experience in quality engineering in a semiconductor equipment or high-tech manufacturing industries
• Experience supporting internal audits, certification audits, and/or customer audits.
• Familiarity with operational excellence tools such as Lean manufacturing, FMEA, SPC, PDCA, 8D problem solving, and Six Sigma.
• Strong problem‑solving and analytical skills, with hands‑on experience applying structured methodologies such as 8D.
• Clear and effective communication skills for collaboration with both internal and external stakeholders.
• Ability to work independently and manage multiple priorities in a global, cross‑functional environment.
• Proficiency in written and spoken English.

What sets you apart

• ISO 9001 internal auditor or lead auditor certification.
• Leadership exposure in customer escalation management.

Apply today to be part of what’s next.

We make the tech that enables the chips in devices which improve lives around the world. We do this with an eye to the future, pushing the boundaries of what’s possible through cutting-edge innovation, and driving the next wave of technological breakthroughs that shape how we live, work, and connect.

To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram, X and YouTube.

ASM is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, age, nationality, social or ethnic origin, sexual orientation, gender, gender identify or expression, marital status, pregnancy, political affiliation, disability, genetic information, veteran status, or any other characteristic protected by law.

Product Quality

·    Maintains quality engineering programs, standards and improvements within the organization.

·    Develops and initiates standards and methods for inspection, testing and evaluation based on medical device standards

·    Devise sampling procedures and designs and develops forms and instructions for recording, evaluating and reporting quality and reliability data.

·    Develops and implements methods and procedures for disposition of discrepant materials.

·    Directs inspection team engaged in measuring, inspecting and/or testing products or parts and tabulating data concerning materials, product or process quality and reliability.

·    Executes the inspection / testing of new equipment capability

·    Supervises inspection team on the inspection plan

·    Supports Product Engineering and Program Manager with customer interfaces as necessary on quality related issues.

·    Provides liaison to various regulatory bodies

·    Responsible for authorizing the released of final products to customer

·    Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs

·    Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

·    Assist others within same or cross-functional department assign by Head of Department/Manager on ad-hoc duties as necessary.

Job Requirements

• Typically requires a Bachelor Degree or equivalent experience
• Minimum 2 years of experience in similar capacity
• Familiar with ISO 13485 Quality System Requirements and FDA CFR Part 820 regulations
• Familiar with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Candidates with relevant experiences will be considered for Senior position

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Responsibilities

- Design, write, and execute test cases for performance, load, stress, scalability, and reliability testing

- Execute manual or automation testing to ensure systems meet non-functional requirements and standards

- Analyse testing results and provide detailed reports on system's performance and reliability

Requirements

- Bachelor's degree in Computer Science or other related courses

- 2 to 5 years of relevant working experience as a non functional software tester

- Experience in either Unix or Linux platform is required

- Experience in peformance/stress/load testing

- Knowledge in financial markets products such as indices, equities, commodities, FX and fixed income will be an added advantage

Responsibilities

·      Tolead the quality improvements through working with all relevant department andsupplier on the Kaizen activities.

·      To understand customer manufacturing quality requirement & align with the business agreement so as to work effectively with all suppliers to achieve KPI target for the line rejection.

·      Perform analysis on internal defects and drive improvements from relevant departments to achieve quality KPI.

·      To support Quality System Lead in ISO implementation for the company

·      To collaborate with internal team and provide support to Quality System Lead in all certifications requirement for the products as stated by customer

Requirements

·       Degree/ Diploma in Engineering with at least 3 years of relevant working experience in Manufacturing

·       Ability to work with the customer, HQ /factory, Peers / Subordinate, and Superiors

·       Strong problem-solving and interpersonal skills

·       Ability to work with minimal supervision

·       Able to handle customer complaint and work well with internal & external department to resolve quality issue

·       Able to provide constructive solution /advice to the team

·       Good knowledge in ISO management and customer audit

To find out more about this opportunity, please contact Lionel Liew atlionel.liew@gmprecruit.com.

We regret that only shortlisted candidates will be notified.

GMP Technologies (S)Pte Ltd   |   EA Licence: 11C3793 |   EA Personnel: Lionel Liew   |   Registration No: R1330693

Key Responsibilities

• Design, implement, maintain, and validate safety-critical control systems.
• Development, build, installation, troubleshooting, and resolving technical issues, collaborating with the software and mechanical engineering team, and maintaining compliance with industry standards.
• Contribute to the testing and commissioning of equipment, ensuring reliability and functionality.

Job Knowledge

• Knowledge in Control Systems Design, Safety Compliance Documentation, Electrical Engineering Concepts and Applications.
• Knowledge in PLC Programming, I/O Addressing and Industry Standard Communication (e.g. modbus, TCP/IP, EtherCAT).
• Knowledgeable and proficient in SolidWorks Electrical and/or AutoCAD LT. Strong coding skills in C++, C# and Visual Basic.
• Demonstrated ability to diagnose and resolve issues through effective Troubleshooting.
• Experienced in sourcing electrical components and possess strong technical knowledge.

Requirements

• Possess Diploma/Degree in Electrical/Electronics/Engineering or equivalent
• Have at least 2-4 years of experience working in Factory Automation/Material Handling and/or Conveyor Systems
• At least 2 years of experience in machine programming from scratch
• Able to understand electrical diagrams and panel designs
• Those with experience in SCADA programming will be highly regarded
• Strong interpersonal skills and able to work both individually and in a team
• Willing to work long hours in Cleanroom environment
• Able to travel overseas for last minute projects support (rarely)

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Overview:

We are looking for a hands-on RF Test Engineer to oversee the testing, calibration, and troubleshooting of high-reliability RF and microwave electronics (such as SSPAs, BUCs, LNAs, and transceivers) within a fast-paced production environment.

Key Responsibilities:

RF Testing & Tuning: Set up test benches, calibrate equipment, and test microwave components across multiple frequency bands (C, X, Ku, Ka-band).

Troubleshooting & Rework: Perform circuit analysis to diagnose faults in RF modules/PCB assemblies and support production line troubleshooting.

Equipment Operation: Master lab tools including Spectrum Analyzers, VNAs, Signal Generators, Power Meters, and Oscilloscopes.

Documentation & Quality: Create and update test procedures, accurately record results in MES/MRP systems, and ensure compliance with AS9100/ISO9001 standards.

Automation: Use and develop LabVIEW software to optimize automated test processes.

Requirements:

Education: Degree (Bachelor's/Master's) in Electrical/Electronic Engineering or a related technical field.

Experience: Minimum 5 years of direct experience in RF/microwave electronics manufacturing and testing.

Technical Skills: Proficient with core RF test equipment, LabVIEW, and standard production databases (e.g., SAP, Omnify).

Working Conditions: Comfortable working in a manufacturing plant and flexible to adapt to future shift-based production schedules if required.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Employment Type: 12 months renewable contract

Location: Bendemeer

Working Hour: Regular Office Hours

Responsibilities:

• Perform functional testing on SSD through execution of tests (both automated and manual)
• Perform initial failure analysis and work with Validation engineers to resolve test failures
• Modification of functional test scripts to achieve targeted test coverage
• Perform debug and evaluation towards resolution of issues with Firmware engineers.
• Participate in setting up of test environment and servers in preparation for validation.
• Tabulate test results and generate report for continuous firmware health monitoring.

Qualifications and Skills:

• Degree in Computer/Electrical/Electronic Engineering.
• Basic working knowledge with Windows and/or Linux.
• Experience in the setup and/or debug of laptop/desktop/server systems would be an advantage.
• Knowledge in Linux/ Python scripting and/or experience with basic signal/power measurement equipment is preferred.
• Experience in using PCIe/NVMe bus analyzers and Analog/Mixed Signal oscilloscopes would be beneficial.
• Comfortable working in an ESD-protected lab environment.

**Interested candidates, kindly email updated resume to xiaoyee@wanco-manpower.com with Subject of "Test Engineer", thank you.