Total 21 procurement engineer job vacancies in Quality Assurance / Control category in Penang

Tasks & responsibilities:

• Candidate must be able to provide solution for QAQC matter and drive the result.
• Responsible for the supervision and monitoring of construction works in accordance with the contracts and construction drawings especially in respect of specifications, quality and time of completion.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction and interfacing of the multidisciplinary processes
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
• To ensure that all materials delivered to site are conform to the approved specifications and the project's inspection test plan.
• To regularly report to relevant superiors on the progress of the works and the problem areas encountered especially in respect defective, outstanding or non-confirming works or delayed works.
• Upon completion of work, to carry out final inspections and handovers including ensuring that all as built drawings are prepared and a copy kept with relevant superiors prior to issuance of certificate of practical completion.
• To control all relevant project documents and data, prepare reports on progress, site activities and all other related matters.
• All other duties as and when assigned from time to time by the superior / management.

 Qualifications & experience:

• At least 3 years working experience in the related field required for this position.
• Candidate must possess at least Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering or relevant discipline
• Candidate fluent in Mandarin preferred as role requires candidate to deal with Mandarin speaking clients.
• Working experience in industrial projects is an advantage. 
• Candidate must be able to work in Penang on 6 working day basis weekly.

Perks & Benefits

• Regular team activities
• Medical insurance
• Personal development opportunities

任務與職責：

• 候選人必須能夠為品質保證/品質控制問題提供解決方案並推動結果達成。
• 負責依照合約和施工圖監督和監控施工工程，尤其是在規格、品質和完工時間方面。
• 對每項活動的品質和工藝負責，精通工程建設的各個方面以及多學科流程的銜接。
• 負責整個專案的品質保證/品質控製文件，包括證書、校準、測試結果、檢驗請求、不合格報告和現場指示/觀察、交付的永久性材料以及其他重要的品質保證/品質控製文件。
• 制定並確定所有程序的檢驗和測試標準，監督所有測試方法，並保持所有流程的高品質標準。
• 確保運抵現場的所有材料均符合核准的規格和項目的檢驗測試計畫。
• 定期向上級報告工程進度和遇到的問題，特別是有缺陷、未完成或不合格的工程或延誤的工程。
• 工程竣工後，進行最終檢查和交接，包括確保所有竣工圖紙均已準備就緒，並在頒發竣工驗收證書之前將副本提交給相關上級。
• 負責管理所有相關的專案文件和數據，並編制進度報告、現場活動報告以及所有其他相關事項報告。
• 上級/管理階層不時指派的其他所有職責。

資格和經驗：

• 應徵此職位至少需要3年相關領域的工作經驗。
• 應徵者須持有至少工程或相關專業的專業證照、文憑/高級文憑/高等文憑/研究生文憑、學士學位/研究生文憑/專業學位。
• 優先考慮普通話流利的候選人，因為該職位需要候選人與講普通話的客戶打交道。
• 有工業專案工作經驗者優先考慮。
• 應徵者必須能夠在檳城每週工作 6 天。

福利待遇

• 定期團隊活動
• 醫療保險
• 個人發展機會

• Develop and maintain test programs for characterization, wafer sort, and production using the Advantest V93000 (93K) platform.
• Design and validate test hardware solutions for high-speed I/O (HSIO) applications.
• Lead projects across all development phases, from bring-up to production ramp.
• Collaborate with DFT and DFM teams to improve testability, optimize yield, and enhance overall test methodologies.
• Establish and implement robust test practices, including GR&R, HTOL, and characterization procedures.
• Drive continuous improvement of test coverage, efficiency, and quality.
• Provide technical leadership and mentorship as needed across cross-functional teams.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management. 

Job Description

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives 

To ensure the quality, functionality and reliability of a product before it released to the customer by identifying and diagnosing defects and issues

Key Responsibilities

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.
• Have knowledge on ATE tester platform e.g Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX & LTX tester

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.

Are you a recent graduate passionate about electronics, testing, and problem-solving? We are looking for enthusiastic individuals to:

• Set up new products and enhance test strategies for existing products to improve test efficiency, yield, and production capacity.
• Support our QA team by analyzing customer failure samples and developing programs to prevent similar issues in the future.
• Train and guide technicians to streamline daily repair operations.
• Troubleshoot test boards and testers when IC failures occur, and implement permanent solutions.
• Ensure smooth operation of test stations by monitoring performance, stability, and robustness, and investigating any deviations.
• Gain hands-on experience with ATE tester platforms such as Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX, and LTX.

The Quality Control Engineer is responsible for ensuring that products and manufacturing processes meet required quality standards. This role involves monitoring in‑process quality, performing data analysis, managing change processes, supporting audits, driving continuous improvement to enhance product reliability and manufacturing efficiency, ensures that new product introduction builds meet all quality and reliability requirements before mass production.

Key Responsibilities

• Establish, monitor, and drive improvement of critical product and process quality metrics (yield, defect rates, Cp/Cpk, and reliability).
• Develop, implement, and maintain Control Plans, PFMEA, risk assessments and product/process qualification activities to ensure stable and compliant manufacturing processes.
• Drive cross-functional issue resolution with Process, Equipment, and Operations teams, leading root cause analysis and corrective/preventive actions using structured problem-solving methodologies (e.g., 8D, Fishbone, 5-Why).
• Support customer quality requirements, including audits, documentation control, and technical discussions.
• Ensure compliance with applicable industry and customer quality standards (e.g., ISO 9001, IATF 16949, VDA 6.3, customer-specific requirements) and continuously improve quality processes, lessons learned, and best practices.