Total 659 network engineer job vacancies in Quality Assurance / Control category

Job Responsibilities

Quality Assurance & Control:

• Establish, implement, and maintain quality control plans for manufacturing processes and products.

• Ensure compliance with quality management systems (e.g. ISO 9001, AS9100, ISO 13485, or equivalent).

• Monitor product quality through inspections, audits, SPC, and process capability studies.

• Review and approve inspection plans, control plans, work instructions, and quality procedures.

• Lead root cause analysis and corrective/preventive actions (CAPA) using structured problem-solving methodologies.

• Quality Lead for customer audits/visits, working with respective Production/Engineering Team to get all the documents and production shop floor ready for the audits.

• Interpret technical drawing and analyze CMM inspection reports.

• Perform measuring on critical dimensions of the parts by CMM, micrometer, vernier caliper, gauges, smart scope, roundness tester, microscopes etc.

• Use of the Departmental Quality Systems, Smart QC, High QA and NCR module to perform day-to-day duties.

• Generate Inspection Plans for Incoming, In-process and Outgoing Inspections.

• Generate Work Instructions for inspection-related processes.

• Perform First Article Inspection report and buyoff with the customers.

• Perform Source Inspection with the customers as requested.
  
  

Process & Continuous Improvement:

• Drive continuous improvement using Lean, Six Sigma, Kaizen, and other quality tools.

• Analyze manufacturing data to identify trends, risks, and opportunities for quality improvement.

• Support process optimization to reduce defects, scrap, rework, and customer complaints.

• Participate in failure mode and effects analysis (FMEA) for new and existing processes.

• Responsible for scheduled maintenance and calibration of measuring equipment, jig and fixtures.

New Product Introduction (NPI)/Engineering Support:

• Support new product launches by ensuring quality standards are defined and met.

• Participate in design reviews and ensure design-for-quality and manufacturability principles are applied.

• Validate process changes and engineering updates to ensure compliance with quality requirements.

• Generate Process Control Plan and FMEA with Engineering Team.

• Responsible for maintaining Non-conforming Product Control (Reject Material Report) procedure.  Analyze and review Reject Material Report (RMR) with Engineering/Production when non-conformance found. Work with Engineering/Production to resolve on any of the non-conformance found.
  
  

Audits & Compliance:

• Plan and conduct internal audits and support external audits from customers, certification bodies, and regulatory agencies.

• Ensure timely closure of audit findings and non-conformances.

• Maintain documentation and records in accordance with quality standards and company policies.

Position Requirements

Education Requirements: Minimum Diploma in Mechanical Engineering or related field

Experience Level Requirements: 3 years of QC/QA experience in Precision Engineering, manufacturing environment will be preferred

Skills Desired:

• Strong knowledge of manufacturing processes and quality methodologies.

• Proven experience in a regulated or high-volume manufacturing environment.

• Demonstrated track record in driving quality improvements and resolving complex quality issues.

• Knowledge in Statistical Process Control (SPC) techniques such as Gage R&R, CPK, DOE will be advantageous.

• Familiarity with statistical analysis and quality software tools.

• Ability to interpret engineering drawings, specifications, and technical standards.

• Strong analytical and problem-solving capabilities.

• Excellent communication and stakeholder management skills.

• Ability to work independently and manage multiple priorities effectively.

• High attention to detail with a process-oriented mindset.

- Obtain immediate containment, root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.

- Work closely with Buyers and Vendors to close out defect cases

- Drive internal corrective action with immediate disposition for defects deemed responsibility.

- Drive continuous improvement throughout supply base to meet quality and corporate goals.

- Perform supplier assessments and audits as required by audit plans.

- Guide new vendors and enforcing requirements to meet world class Quality standards

- Provide presentation materials for the following meetings: Board of Directors, Quality, Supplier and Manufacturing.

- Hold Quality Performance Review with vendors

- Make MRB decisions and drive immediate actions by working with responsible engineers.

- Responsible for measuring and hiting all inspection metrics including incoming defect rate,

ship to stock rate, inspection backlog and SCAR metrics.

- Responsible for Quality performance to Goals 5S/Safety requirements.

- Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures, etc.

- Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements

- Manage safety reporting for the department.

- Well versed in inspection techniques in order to perform first article inspections and production validation of piece part components and assemblies during source inspection

- Familiar with inspection equipment from vernier to complex CMM layout inspection to perform source inspection at vendor’s site where necessary

- Electrical / electromechanical experience preferred

- Experience in driving quality improvement for mechanical commodities such as machining, sheet metal, frames or consumables

- Experience in driving quality improvement for electrical commodities such as PCBA, box build, cable & harness

- Able to interpret complex mechanical & electrical drawings and geometric tolerancing

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Please note that this is a yearly renewable contract position.

Engineer's Responsibilities

• Process Monitoring: Ensure manufacturing processes comply with defined SOPs, work instructions, and quality standards.
• In-Process Inspections: Conduct routine inspections at critical points in production to detect defects early.
• Defect Prevention: Identify potential quality issues and implement preventive measures to reduce defect occurence.
• Data Recording & Reporting: Document inspection results, process deviations, and defect trends accurately.
• Collaboration: Work closely with production teams, line leaders, and engineers to resolve quality issues promptly.
• Corrective & Prevention Actions (CAPA): Assist in root cause analysis and verify the effectiveness of corrective actions.
• Compliance & Audits: Ensure adherence to company quality standards and support internal/external audits.
• Continuous Improvement: Recommend process improvements to enhance product quality and process effciency.

Requirements:

• Understanding of manufacturing and assembly processes.
• Ability to read and interpret engineering drawings, BOMs, and work instructions.
• Strong analytical and problem-solving skills.
• Attention to details and consistency in inspection practices.
• Good communication and teamwork skills.

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality System

1. Develop, implement and maintain QMS documentation to maintain compliance with applicable standards such as ISO 9001, ISO 13485 or GMP

2. Monitor regulatory changes and update the QMS accordingly

3. Conduct internal audits and support external audits (external auditing bodies, suppliers and customers)

4. Analyze quality data and metrics to identify trends and areas for improvement

5. Collaborate with cross functional teams to ensure that the quality standards are integrated into processes

Management Representative

1. Reports on QMS performance to top management and recommend improvement

2. Point of contact for certification bodies

3. Lead Management Review and follow up action items

Product Quality Management

1. Analyze and capture recurring product complaints, collaborate with Operation and Technology teams to address compound specified failures

2. Operational Quality Support. To facilitate continuous improvement initiatives, by providing on the floor support through use of quality tools and coaching teams to build ownership and proactive engagement with quality processes.

Customer Complaints Management

1. CCAR Manager. Manage the customer complaints handling process to ensure that all complaints are logged with right information for investigation till auditing process

2. Collaborate with cross functional team during the investigation, resolution and communication of customer complaints

3. Review interim CCAR reports to ensure that root cause is data driven and corrective action(s) address the root cause

Supplier Complaints Management

1. SCAR Manager. Approve SCAR – Supplier related complaints and defects, review and monitor the effectiveness of corrective actions

2. Collaborate with Procurement, Supplier and internal stakeholders to investigate issues and resolution

3. Collaborate with Procurement, Operation and Technology to assess risk and quality impact of raw material on finished goods

Global Quality Team Collaboration

1. Support the implementation of global quality initiatives, systems and tools

2. Ensure that local QMS aligns with global practices and corporate policies

3. Share best practices and lessons learned across global sites

Support Quality Contracts/Documentation

1. Review customer documents and quality related agreements for compliances to ensure clauses are relevant, assess the risks.

2. Response to customer request for certifications, compliance/quality related/audit documents

System

1. Conduct training for staff in Quality Procedure, Standards and Tools.

2. Lead processes identified by the Global Quality Team such as PPAP, QIR, CCAR, SCAR and Mastercontrol for the Asia Region

Requirements:

· Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

· Certificate in Quality Engineering is preferred.

· 4-6 years of quality management experience. Junior with 1-2 experience in related field can also apply

· Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

· Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing.

· Good experience into customer & supplier audit and able to conduct training

· Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

· Occasionally overseas travel and weekly conference call is required for the role

· This position required to communicate closely with vendors in China.

Working hours:

Mon to Fri 8.30am - 5.30pm ( 1 day hybrid )

Responsibilities:

1. Responsible for the end-to-end setup of the process quality module for the new factory;

2. Responsible for monitoring quality objectives during project trial production and mass production, and collecting issues;

3. Responsible for organizing Quick Response Quality Control (QRQC) meetings and handling non-conforming products;

4. Responsible for monitoring the progress of quality issue analysis and resolution, and escalate issues in a timely manner based on the current situation;

5. Responsible for updating and maintaining on-site Control Plans (CP) and Standard Inspection Procedures (SIP);

6. Responsible for leading customer audits and following up on identified issues;

7. Responsible for onboarding training for quality control inspectors.

Requirements:

1. 5+ years of work experience in the field of quality (including 2+ years of work experience in process quality); Experience in the automotive industry is preferred;

2. Possess IATF internal auditor qualification;

3. Be proficient in the five core quality tools in the automotive industry (APQP, PPAP, FMEA, MSA, SPC);

4. Experience in the end-to-end setup of a factory is preferred.

Job Purpose

The QA Engineer is responsible for ensuring product quality, compliance, and continuous improvement within AMI coating production. 

This role supervises QA Technicians in carrying out quality inspections, oversees quality data collection and reporting, manages customer feedback, and drives improvement initiatives. 

The QA Engineer also supports new project development and Quality & Environmental Management Systems (QEMS) to meet organizational goals. 

Responsibilities

1. Quality Assurance & Inspection

• Supervise QA Technicians to perform Outgoing Quality Assurance (OQA) inspections for shipment release.

• Ensure inspection processes are executed accurately and in compliance with established standards and requirements.

• Ensure proper control is exercised for identification, segregation, disposition and documentation of all non-conforming materials and products in coating production.

2. Data Collection & Reporting

• Collect, monitor, and analyze coating production yield data.

• Prepare and submit weekly quality and yield reports to management.

3. Continuous Improvement

• Initiate and lead continual improvement and lean projects to enhance quality, efficiency, and process reliability.

• Identify recurring quality issues and implement corrective and preventive measures.

4. Corrective Action Process

• Conduct failure analysis for both internal quality issues as well as customer feedback.

• Follow up Production’s corrective action report before closure.

• Record and track production customer’s feedback/complaint.

5. Project & Document Support

• Support new project development by preparing and implementing Quality Plans, Standard Operating Procedures (SOP), Standard Inspection Plans

• (SIP), and Work Instructions (WI).

• Collaborate with cross-functional teams to integrate quality requirements into project activities.

6. Measurement

• Monitor daily measurement results and analyze measurement deviation.

• Manage measurement equipment: Arrange for calibration and maintenance.

7. Engineering Change Process

• Track Engineering Change Request report.

• Validate changes as per ECR.

• Track and check on first 3 lots batch production upon completion of ECR.

8. QEHS Support

• Support the Quality & Environmental Management Systems (QEMS) by monitoring quality and environmental performance targets and programs.

• Ensure compliance with ISO and other regulatory requirements.

• Ensure proper control is exercised in production as per QEMS requirements and strive to achieve QEMS and Safety objectives.

9. Key Performance Indicators (KPI)

• Coating production yield

• CONQ

• Customer complaint rate and response time

• Internal quality deviations

• Zero nonconformance at internal and external ISO audit.

•   Initial and complete at least 1 lean project per quarter.

Requirements

• Bachelor Degree in Engineering/ Science

• Good documentation skills.

•   Knowledge of quality assurance methodologies, tools, and techniques

• Familiarity with ISO 9001 and ISO 14001, 2015 standards

• Experience in coating, surface treatment, or manufacturing industry is an advantage.

• Strong data analysis and reporting skills, with proficiency in MS Office (Excel, PowerPoint, Word).

• Ability to prepare and review Quality Plans, SOPs, SIPs, and Work Instructions.

• Understanding of lean manufacturing and continual improvement methodologies (Kaizen, 5S, Six Sigma).

• Comfortable working on-site (Monday - Friday).

• Analyze user requirements and enhancement requests.
• Formulate the relevant test scripts/cases.
• Perform UAT planning, design and execution of test cases.
• Work with Product/Project Managers, IT and relevant support/other business units to draft user requirements and act as Test Manager (user) for projects.
• Work with Product/Project Managers, IT and relevant support/other business units to ensure smooth execution and implementation of test cases.
• Log, manage/follow-up with relevant stakeholders on defects and close them.
• Document all test results.
• Provide daily status update on UAT progress.

Requirements:

• Recent hands-on experience in ATM testing, including functional and regression testing.
• Familiarity with ATM software and hardware integration, as well as transaction flows.
• Strong knowledge of test planning, scripting, and defect management.
• Preferably a senior-level tester with the ability to work independently and collaborate with multiple stakeholders

Interested candidates kindly submit your recent CV in a Word Format to: Jasmin@Tangspac.com. Only shortlisted candidates will be notify. Thank you.

Job Summary / Purpose

• Lead and maintain Quality Management System (QMS) aligned with ISO 9001, ISO 22000, ISO 13485

• Ensure compliance with GMP, GDP, FDA, EU regulations, China GB and other applicable standards

• Drive quality assurance across incoming, in-process & outgoing controls

• Support audits, regulatory compliance, and customer requirements

Responsibilities and Accountabilities:

• Quality Operations

· Establish and maintain QA inspection procedures

· Manage non-conformance and corrective actions (8D, RCA)

· Perform SPC, trend analysis, and risk assessment (FMEA)

• QMS & Compliance

· Maintain ISO 9001, ISO 22000, ISO 13485 systems

· Ensure GMP, GDP compliance

· Control SOPs and documentation

• Audit Management

· Conduct internal audits and follow up CAPA

· Support external certification audits

· Handle customer audits and responses

· Perform supplier audits and qualification

• Regulatory Compliance

· Ensure compliance with FDA, EU, China GB requirements.

· Support documentation such as DoC, SDS, and reports.

• Management Review & Improvement

· Prepare management review data and reports.

· Drive continuous improvement and Lean initiatives.

• Customer Management

· Handle customer complaints and quality communication.

• People Management

· Train and supervise QA Inspectors

· Manage QA Engineers (For Senior QA)

Requirement

• Degree in Engineering (Mechanical, Materials, Chemical, or related field)

• Certified Internal Auditor (ISO 9001 / ISO 22000 / ISO 13485)

• Certified Quality Engineer (CQE) or equivalent

• Minimum 2–5 years (QA Engineer)

• Minimum 5–8 years (Senior QA Engineer, with leadership experience)

• Experience in manufacturing (packaging, food, medical, or related industries preferred)

• Preferably able to start work immediately or at short notice

• Strong knowledge of :

1. QMS standards (ISO 9001, ISO 22000, ISO 13485)

2. GMP, GDP, and regulatory frameworks

3. SPC, FMEA, CAPA

4. Root Cause Analysis (8D)

5. Data analytics and reporting

6. Good understanding of manufacturing processes

7. Strong communication and audit handling skills

8. Ability to lead cross-functional teams

Key Responsibilities

Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.

Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.

Develops methods and parameters, project methodology and/ or project proposals.

Develops and uses procedures.  Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.

Analyze operational data; Develop and implement recommendations.  Participates in and may lead audits. 

Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs 

Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Reduces qualification cycle time and cost while still meeting quality performance requirements. 

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

• Working Location: Woodlands
• Working Days: Monday – Friday
• Working Hours: 9:00am -6:00pm
• Starting Salary: $3,500 to $5,000

Responsibilities:

• Architect and design embedded firmware for motion control systems with a focus on optimal performance and precision
• Develop end-to-end application and firmware solutions including multi-thread, scheduling optimization, real-time operating systems (RTOS), and bare-metal implementations
• Design custom kernel drivers and APIs specifically tailored for motion control applications and interfacing with sensors and actuators
• Actively contribute to system architecture development and the implementation of new features relevant to motion control
• Design, develop, and thoroughly test firmware for embedded motion control systems
• Stay abreast of emerging technologies and advancements in motion control for product development enhancements
• Undertake debugging, system bring-up, beta testing, and production software development tasks
• Collaborate effectively with both software and hardware teams to ensure successful integration of motion control systems

Key Requirements:

• Bachelor's Degree in Computer Science, Electrical Engineering, or related field
• Minimum of 5 years of relevant experience in embedded software development
• Proficiency in software design and programming in C/C++ for development, debugging, testing, and performance analysis
• Understanding of hardware functionalities including clock-level issues, interrupts, polling, etc.
• Experience with motion controller systems, such as PID control loops, servo control algorithms, and interfacing with sensors and actuators for motion control applications

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781