Total 590 technical support engineer job vacancies in Manufacturing / Production category

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Product Engineering Department diverse team of talent.

What you will be working on:

• Ensuring 1st time yielding silicon, benchmark D0 for baseline and products.
• Identify & resolve Product, Test & Fab-Process related yield limiters in shortest time possible.
• Technical interface with Business Lines/customers
• Driver for yield improvement
• Resolve product yield, quality and reliability issues
• Perform pre-tapeout risk assessment and communicate with Business line/Fab on the necessary actions to eliminate/minimize the risk.
• Work with Customers/Mother Fab on the DfM related issue.
• Conduct product yield analyses to identify root cause of wafer sort and final test failures
• Set up fault diagnostic capabilities for yield improvement
• Work with Business line/customers on product low yield disposition
• Perform electrical and physical failure analysis to isolate fail location
• Drive the yield improvement task force

More about you:

• Master/bachelor’s degree in electrical / Electronic Engineering or Science in Physics
• 2 – 8 years product and/or test engineering, failure analysis or process-integration experience
• Experience in Fab process, yield engineering or design will be an added advantage
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical & problem-solving skills
• Good interpersonal and communication skills

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Role: Production Support Analyst

Job Requisition Number: IS-88092

Job Level: 3-5 years of relevant experience (L2)

Location: Singapore

Key Responsibilities:

• To handle level 2 production support activities including review upcoming changes, resolve incident tickets, raise problem ticket, support system maintenance and document knowledge base to shift demand to level 1 production support etc.
• To provide support during end of day batch run
• To work with various stakeholders (i.e., incident management, level 2 (group) and level 3 production support, data center operation, user operation, infrastructure support etc) to resolve major incident.
• To work with various stakeholders (i.e., service automation, level 2 (group) and level 3 production support etc) to implement application monitoring, report and dashboard.

Key Requirements:

Must Have:

• Bachelor’s degree of Computer Science or Engineering
• Minimum 5 years of experience working in IT industry with relevant experience in technology solution or support service delivery in the banking/financial industry.
• Good and assertive communicator in speaking & writing.
• Good analytic and problem-solving skills
• Able to work in a fast-paced, team-oriented environment and weekend / wee hours.
• Experience in L2 or L3 production support

Good to Have:

• Understanding of ITIL, SDLC
• Knowledge on enterprise tools, i.e., MQ, Connect Direct, Control M etc.
• Knowledge on monitoring, log analytics, automation tools, i.e. Geneos, Splunk, Ansible, Grafana, Elastic Search etc

Technical Skills:

• Familiar with OS/400 system
• Familiar with RPG, COBOL language
• Have experience with Silverlake banking system is plus point.

Please forward your resume in MS word format to Careers@infogainglobal.com

Location: North Singapore

Work Schedule: 5 Days (Mon - Fri, 9:00 AM – 6:30 PM)

Remuneration: Competitive Base Salary + AWS + Variable Bonus (VB)

About the Role

We are seeking a versatile and strategic leader to join our team in a hybrid capacity as a Product Manager / Technical Manager. This is a pivotal role within our semiconductor division, where you will bridge the gap between technical engineering excellence and product strategy. You will be responsible for leading high-performing teams, influencing next-generation equipment features, and delivering technical solutions that meet the complex needs of our global customers.

Key Responsibilities

• Strategic Leadership: Partner with the Business Unit, Head of Engineering, and Sales teams to develop and execute comprehensive product and technical strategies.

• Product Development & Influence: Deeply understand customer requirements to influence next-generation product features and drive technical innovation.

• Technical Solutions & Support: Provide expert applications support for customer implementations, ensuring successful equipment introduction and troubleshooting.

• Team Mentorship: Lead, mentor, and develop engineering and technical teams to maintain a high-performance culture and operational excellence.

• Complex Problem Solving: Manage high-level engineering challenges through data analysis, experimentation, and seamless cross-functional coordination.

• Sales Collaboration: Assist Sales teams in evaluating product applications and preparing technical specifications for new business opportunities.

• Process Excellence: Maintain and review engineering process documentation to ensure alignment across all functions.

• Lifecycle Management: Oversee equipment optimization and lifecycle management within a fast-paced, high-tech manufacturing environment.

Requirements

• Bachelor’s Degree in Engineering, Material Science, or a related discipline.

• Proven background in the Engineering or Semiconductor industry.

• Prior experience with Semiconductor Equipment (Front-End or Back-End) is highly preferred.

• Managerial or supervisory experience is an advantage; must demonstrate the ability to lead and develop technical talent.

• Strong leadership and communication skills are essential for cross-functional collaboration.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Summary

The Production Engineer supports and optimizes daily electroplating operations to ensure consistent product quality, efficient production flow, and compliance with safety and environmental standards. The role requires strong knowledge of plating processes, chemical bath control, equipment maintenance, and continuous improvement.

Key Responsibilities

1. Process Parameter Control

• Perform daily checks on all process parameters (temperature, pH, current, bath levels, flow, pump condition).

• Audit operators to ensure each process step is carried out according to specification and SOP.

• Train operators on proper equipment usage: valve operation, pump priming and air-trap checks, chiller operation, and basic line troubleshooting.

• Ensure timely correction actions when deviations are found.

2. Process Optimization

• Identify opportunities to improve loading efficiency (fixture design, part orientation, racking method).

• Work with Production and Process Engineering to increase throughput and reduce bottlenecks.

• Support improvements on cycle time, workflow, and chemical usage.

3. Quality Troubleshooting

• Participate in root-cause investigations for defects (e.g., poor adhesion, uneven colour, stains, white spots, roughness).

• Work closely with QA to verify findings and implement corrective actions.

• Escalate complex technical issues to senior Process Engineers when deeper subject expertise is required.

4. Equipment & Line Readiness

• Support preventive maintenance activities for pumps, agitators, rectifiers, chillers, filtration systems, and plating/anodizing tanks.

• Assist maintenance team in diagnosing equipment abnormalities that affect production stability.

• Ensure calibration of basic instruments (pH meter, conductivity, thickness gauges) is done on time.

5. Documentation & Reporting

• Complete production forms, bath check sheets, process logs, and operator audit records accurately.

• Update SOPs and work instructions when process changes occur.

• Prepare daily reports on process status, defects, and deviations.

6. Safety & Environmental Compliance

• Ensure safe handling of parts, chemicals, jigs, and equipment.

• Follow SDS and internal EHS requirements for chemical storage and disposal.

• Support EHS team during inspections (wastewater, ventilation, PPE compliance).

• Conduct on-the-job safety briefings for operators.

Qualifications

• Degree or Diploma in Chemical Engineering, Mechanical Engineering, Materials Engineering, or related field.

• 1–5 years’ experience in plating/electroplating, surface finishing, or chemical processing preferred.

• Strong analytical, troubleshooting, and process improvement skills.

• Knowledge of Lean Manufacturing, SPC, and chemical safety standards.

Skills Required

• Understanding of electroplating techniques (e.g., nickel, chrome, zinc, gold, tin).

• Ability to read technical drawings and interpret plating thickness requirements.

• Experience with rectifiers, chemical pumps, dosing systems, and wastewater treatment.

• Good teamwork, communication, and leadership skills.

About Doodle Labs 

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR) 

Your Opportunity 

Your opportunity to work with cross-functional teams of RF, Software, Mechanical design, NPI, Operations and Manufacturing/Quality assurance to build the next generation of Doodle Labs' radio portfolio.  

The successful candidate will have significant experience in RF development, Product Engineering and manufacturing of Radio products. 

Key Responsibilities: 

• Support product engineering activities from prototype through production.  

• Assist with product bring‑up, functional testing, validation, and failure analysis.  

• Execute and maintain production and validation test procedures 

• Support manufacturing builds, yield improvement, and quality investigations.  

• Assist in managing component changes and obsolescence under guidance from senior engineers.  

• Prepare and maintain technical documentation such as test reports, assembly instructions, and basic application notes.  

• Collaborate closely with RF, Software, Mechanical, and Operations teams. 

Job Requirements 

• Bachelor’s degree in Electronics, Communication Engineering, or a related field.  

• 2–5 years of industry experience in hardware, RF, or product engineering roles 

• Basic understanding of RF/Wi‑Fi systems and electronic hardware debugging.  

• Familiarity with manufacturing processes, testing, and quality control is a plus.  

• Strong teamwork, communication skills, and willingness to learn.  

About the role

We are looking for an experienced Production Engineer with a solid background in biopharmaceutical manufacturing. The ideal candidate is skilled in process validation, cGMP compliance, and continuous improvement within a regulated production environment.

Key responsibilities

• Provide technical leadership for production systems, ensuring compliance with SOPs and regulatory standards.
• Manage and revise SOPs, Batch Records, and related compliance documentation.
• Investigate non-conformances; lead CAPA and effectiveness check processes.
• Perform periodic revalidation of batch records, utilities, and cleaning validation.
• Initiate and manage Change Requests for continuous process improvements.
• Oversee production scheduling, workforce planning, and shift operations.
• Support IQ/OQ/PQ and requalification activities for critical equipment.
• Act as SME during regulatory audits and support audit-readiness activities.
• Lead Kaizen and Lean initiatives to drive productivity, quality, and safety improvements.
• Collaborate with QA, QC, Microbiology, and Engineering teams for production and compliance goals.

Skills & qualifications

• Degree/ITE/Diploma in Biotechnology, Life Sciences, or a related discipline
• Experience in aseptic processing, CIP/SIP, and cleanroom operations
• Proficiency in DCS systems and equipment commissioning
• Familiar with global regulatory audit requirements
• Proven shift team leadership and cross-functional collaboration

We appreciate your interest in joining our team. Only candidates shortlisted for interview will be notified

About the role:

We are looking for a hands-on Manufacturing Engineer to support the setup, testing, commissioning, and improvement of industrial robotic and automated machinery within a manufacturing environment.

Responsibilities:

• Perform setup, testing, commissioning, and troubleshooting of automated machines and robotic systems
• Provide technical support during machine assembly, production, and final testing
• Work closely with production, quality, R&D, and engineering teams to improve manufacturing processes and efficiency
• Support process improvement initiatives to reduce downtime and improve product quality
• Review and update BOMs and interpret 2D/3D engineering drawings
• Ensure manufacturing processes comply with safety and quality standards

Requirements:

• Diploma in Mechanical Engineering, Mechatronics, or related discipline
• Minimum 1 year of experience in industrial automation or manufacturing engineering
• Familiar with manufacturing processes, machine assembly, and process improvement
• Proficient in CAD/CAM and manufacturing-related software tools
• Strong troubleshooting and problem-solving skills with hands-on technical ability
• Good communication and teamwork skills, with the ability to work across departments
• Familiar with manufacturing safety standards and compliance requirements
• Self-motivated, detail-oriented, and able to work under pressure in a fast-paced environment
• Able to manage multiple tasks and projects effectively

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.
EA License | 18C9251 WGT Group
Registration No | R22111484

JOB SUMMARY

The Engineer will support the Engineering Department in planning, designing, implementing and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.

Main focus: conducts studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production equipment and personnel.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Monitor and continuously improve daily quality/efficiency performance for assigned areas.

· Design and procure production tooling, processing equipment and workstations.

· Coordinate layout and workstation move activities.

· Prepares time estimates for proposed projects and evaluates time factors.

· Minimize change over time by ensuring programs use common set-ups where possible.

· Verify that machine maintenance is being performed on schedule.

· Reduce machine-generated scrap by monitoring machine management data and taking corrective action to improve or correct the operations.

· Reduce manual assembly scrap by monitoring quality data and taking corrective action to improve or correct the operations.

· Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS

EDUCATION AND KNOWLEDGE REQUIREMENTS

· Bachelors Degree in Mechanical or Manufacturing from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

· Preferably 3 years of relevant working experience but fresh graduate is also encouraged to apply.

· Key Requirements:

o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)

o Understanding of Jabil’s global strategies and direction

o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction

o Strong analytical ability

o Able to implement continuous improvements and cost reduction programs

o Good communication skills

· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

System Software Engineer /Product Engineer (Hybrid Role)

Role Summary

The System Software Engineer / PE is a hybrid engineering role responsible for system software governance, platform integration, and end-to-end quality, performance, and process excellence.

This role bridges hands-on technical execution (BIOS, firmware, OS, drivers) with quality and engineering functions, ensuring high-quality system software delivery across platforms and ODMs.

The engineer works cross-functionally with BIOS, EC, OS, driver teams, hardware,validation, ODMs, and suppliers to drive robust design,efficient development processes, and measurable quality outcomes.

Key Responsibilities

1. System Software Engineering

·       Design, develop, integrate, and debug system software components, including:

OS-level components and platform enabling drivers

Hardware abstraction and system-level integrations

·       Analyze system-level issues across hardware,firmware, OS, and drivers, and drive root-cause resolution.

·       Collaborate with internal teams and ODM partnerson design reviews and integration readiness.

·       Support platform bring-up, feature enablement, and sustaining activities across multiple product generations.

·       Ensure compliance with system software standards, security requirements, and release criteria. 

2. Product Engineering(PE) 

·       Define, optimize, and enforce end-to-end system software development and release processes across projects.

·       Drive process standardization, documentation,and governance to improve predictability, efficiency, and quality.

·       Lead process gap analysis and corrective actions for recurring issues (e.g. late defects, rework, integration escapes).

·       Partner with validation, SIT, and ODM teams to ensure clear ownership, entry/exit criteria, and quality gates.

·       Enable scalable execution by translating complex requirements into repeatable workflows and checklists.

3. Cross-Functional & ODM Collaboration

·       Act as a technical interface between engineering teams and ODM partners.

·       Lead technical discussions, issue triage, and joint debug sessions across time zones.

·       Provide clear, data-driven communication on status,risks, and mitigation plans to stakeholders.

Qualifications

Education & Experience

·       Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Computer Engineering, or equivalent.

·       Typically 3+ years of experience in system software, firmware, OS, or platform engineering roles.

 Technical Skills

·  Strong understanding of system software architecture and platform integration.

o  Hands-on experience with one or more:

§  Windows or Linux OS internals

§  Device drivers or hardware-enabling software

o  Solid debugging skills across hardware–firmware–OS boundaries.

o  Knowledge of industry interfaces and protocols (e.g. PCIe, USB, I2C) is a plus.  

Process & Soft Skills

• Strong analytical and problem-solving mindset with a process-driven approach.
• Ability to work independently and lead initiatives with minimal supervision.
• Excellent communication skills; able to influence across engineering, validation, and ODM teams.
• Comfortable operating in global, cross-site, and cross-functional environments.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the TechAalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured,and only shortlisted candidates will be notified for interviews.

Tech Aalto Pte Ltd | 24S2130 EA | Pushpanjli Kir | R1657306.

• Well Established Company

• Salary $3000 - $4,000 basic + Variable Bonus

• Excellent Welfare and Benefits + Career progression

• Working location: Ubi

• Working day: 5.5 days (alternate Saturday)

• Working hours: 8:30am - 6.00pm / 8.30am - 12.30pm (alternate Saturday)

Job Responsibilities:

• Provide technical support and repair guidance to dealership workshops.

• Diagnose and troubleshoot vehicle issues on-site, working closely with workshop teams.

• Submit technical cases to the manufacturer and follow up on repair solutions.

• Conduct technical training and coaching for workshop staff.

• Monitor and analyze vehicle repair data to identify recurring issues and support problem resolution.

• Drive continuous improvements in technical service and repair processes.

• Ensure all work is carried out in compliance with safety and quality standards.

• Collaborate with internal departments on technical projects and initiatives.

• Other ad hoc duties as assigned.

Job Requirements:

• Diploma in Automotive engineering or similar discipline with minimum 3 years of relevant experience in the automotive industry preferred.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work Permanent12-hour shifts (day or night)

Job Responsibilities:

1. Study the current batching, mixing, placing, and curing processes for precast elements.
2. Identify inefficiencies, delays, or quality issues in the concreting workflow.
3. Assess equipment usage, placement techniques, and manpower allocation.
4. Prepare detailed reports on current practices, highlighting challenges and improvement opportunities.
5. Propose optimized casting sequences, plant layout adjustments, and process improvements.
6. Recommend innovations in concrete mix design, curing methods, or material handling to improve efficiency.
7. Collaborate with mould and reinforcement teams to ensure seamless workflow integration.
8. Monitor trial implementations of proposed processes and evaluate outcomes.
9. Ensure compliance with safety, quality, and environmental standards during concreting operations.
10. Provide guidance and training to operators and plant personnel on recommended practices.

Job Qualification:

Education Required:

• Bachelor’s degree in Civil /Structural Engineering, or related field.

Experience Required:

• 3–5 years of experience in precast concrete operations, casting, or concrete technology.
• Strong knowledge of concrete mix designs, casting techniques, and curing methods.
• Experience in productivity analysis and process optimization is preferred.

Description

• Lead Operation plans and processes to optimize manufacturing Operations
• Responsible for Plant operations and performance in accordance with production Goals
• Technical Leadership in Production workforce for plant operation, optimization & Troubleshooting
• Coach & Guide for field and console operators reporting to Production Manager
• Cross function collaborations with Maintenance, Project, Reliability Technical- Technology and HSE functions to troubleshoot Petrochemical Manufacturing Site
• Lead the Operating Procedure development and Plant improvement activities
• Lead plant related risk assessment and compliance of Safe operating work practices
• Hire, Train, Develop, Inspire and Coach the Production team
• Lead emergency response, Crisis Management plan
• Provide guidance of shift team during plant troubleshooting, Start-ups/ Shutdowns / Turn arounds
• Responsible for the development, implementation of prestart up planning activities and oversee commissioning & Start- up activities of grassroot facilities
• Capable to identify, develop and implement improvements / changes in the Plant
• Lead Production ideas for improving Profitability, safety, reliability of facilities
• Process Safety Champion for Operations; MOC/PSSR leadership
• To fill in for Production Manager during his/her absence

Requirements

• Degree in Engineering (Chemical or other equivalent) with least 5-10 years of experience in Petrochemical, Refining Manufacturing facilities
• Production Experience in Rubber, Polymer or Petrochemical plants will be preferred
• Experience as Team Lead of Shift Teams
• Excellent Leadership, Planning & Problem-Solving skills
• Advance Coaching & Mentoring Skill to technician and Undergraduates
• Preferred Experience of Green Field Start-up, Operating Procedure development
• Effective written & verbal communication skills
• Knowledge of Singapore Regulations & Industry HSE practices & Process Safety Basics
• Prior experience in Six Sigma, Lean, 5S, and continual improvement programs are preferred
  

Key responsibilities:

• Work closely with Test Development leader together to drive test strategy, test plan, and characterization plan definition for NPI product development.
• Collaborate with design, manufacturing, and quality assurance teams throughout the product development process.
• Prepare technical documentation, including charac plans, test plans, hardware request document, test status report, and charac report.
• Conduct testing and analysis to validate product performance and compliance with standards.
• Manage sample testing, anticipate potential issues, and adjust processes to fulfill sample demand
• Identify and resolve technical issues during development and production.
• Support product launch activities and provide technical assistance to customers and internal teams.
• Evaluate and improve existing products to enhance cost efficiency, output, and quality by increasing yield, reducing test time, analyzing customer returns and test coverage improvement.

Required qualifications:

• Bachelor’s degree in electronics engineering or a related field.
• Experience in product development, design, or manufacturing.
• Proficiency in phyton and data analytic software.
• Strong analytical and problem-solving skills.
• Excellent communication and teamwork abilities.
• Knowledge of industry standards and regulations.
• Experience with industrial standard ATE (V93K, T2000, Uflex+..)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Assist in New Production Introduction criteria for the following: manufacturing process development, tool design, integrated schedules, design to cost, sourcing technical support, quality qualifications, test support, product cost out and, introduction into the supply chain.
• Provide technical leadership for manufacturing processes of cables, harnesses, electro-mechanical assemblies, inspection, testing, tool and fixture designs.
• Apply knowledge of electrical/ electronic equipment production and test methodologies.
• Help to manage effectively multiple priorities under tight deadlines and bring assigned projects/programs to successful completion and profitability.
• Gather data and develop manufacturing solutions and documentation required for supporting OMS, WI, Schematic, drawings, and specs.
• Perform assembly work and provide guidance to technicians/operators.
• Perform customers’ onsite support for repairs and rework related to assembly process and any other technical issue.
• Manage daily activities of the manufacturing function including BOM, Work Instructions, Engineering Change Order (ECO) and ERP System.
• Perform and support any assembly process during First Article & production stage to meet customer needs.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Able to create/interpret (2D & 3D Cable/Mechanical Drawings, Bill of Material, Operating Procedures, Test Procedures, schematic and Interconnection Diagram, etc)
• General knowledge of Mechanical and Electrical Engineering.
• Good communication and leadership skills; able to train and guide junior technicians.
• Proficient in CAD software.
• Proficient in Microsoft Office with hand-on experience with data and Microsoft Excel reporting.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81261 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781