Total 244 process engineer job vacancies in F&B / Tourism / Hospitality category

Job Summary:

Leading a team in responsible for the strategic design, implementation, and continuous improvement of all quality and process control systems within Fab Operations. This role is critical for ensuring world-class product yield, reducing defectivity, and maintaining strict compliance with customer specifications, internal quality standards, and relevant industry certifications.

Responsibilities:

• Develop and drive a strategic roadmap for yield improvement and defect reduction across critical process modules.
• Lead the design and maintenance of advanced, real-time Statistical Process Control (SPC), Fault Detection and Classification (FDC), and Advanced Process Control (APC) systems to stabilize and optimize all fabrication steps.
• Cross-contamination management to achieve balance between research and development flexibilities in integration runsheet flow path vs process tools health and process repeatability.
• Small volume prototype protocol and product and process control plan alignment and set-up with requestor, process margin runs till demonstration of product SPC repeatability and line defect and electrical yield.
• Serve as the technical expert and primary quality interface for key customers, leading customer audits, addressing quality-related concerns, and driving customer-specific quality improvement plans.
• Problem Solving: Direct and oversee high-level, cross-functional root-cause analysis (RCA) and corrective and preventive action (CAPA) teams for major process excursions, non-conformances, and field returns, utilizing methodologies like 8D or Six Sigma
• Metrology & Inspection: Oversee the selection, qualification, and maintenance of all in-line and off-line metrology and defect inspection tools, ensuring measurement system accuracy (Gage R&R) and high data quality.
• Process Window Definition: Collaborate with Process Integration and R&D teams to define, qualify, and stabilize robust manufacturing process windows for all new product introductions (NPI), ensuring Design for Manufacturability (DFM) principles are met.
• Data Analytics: Leverage large-scale manufacturing data (Big Data) to identify subtle process drifts, predict failures, and proactively implement controls.
• Lead, mentor, and manage a team of Quality Engineers, Process Control Engineers, and Technicians, setting performance goals, developing career paths, and fostering a culture of ownership and data-driven decision-making.
• Collaborate closely with all stakeholders to balance the trade-off between quality stability, process efficiency, and tool uptime.

Requirements:

• Degree in Engineering, Materials Science, Chemical Engineering, or a related technical field.
• Preferable 10+ years of experience in the semiconductor industry, with a minimum of 5 years in a leadership/management role focusing on Process Control, Quality Assurance, or Yield Engineering within a Fab environment.
• Deep technical knowledge of semiconductor fabrication processes in different modules.
• Expert-level knowledge of Statistical Process Control (SPC), Design of Experiments (DOE), Failure Mode and Effects Analysis (FMEA), and Lean/Six Sigma methodologies (Black Belt certification highly preferred).
• Strong leadership, presentation, and interpersonal skills, with the proven ability to influence and align technical and executive stakeholders.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancie
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancie
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

We are seeking an experienced Design Engineer to support detailed engineering, design development, and project execution activities. The successful candidate will be responsible for preparing engineering drawings, performing design calculations, supporting procurement activities, and ensuring engineering deliverables are completed in accordance with project specifications, industry standards, and schedule requirements.

Key Responsibilities

Engineering & Design

• Execute detailed engineering and design activities to meet project requirements, contractual obligations, and applicable industry standards.
• Prepare and review: P&ID drawings Fabrication drawings Equipment layout drawings Pipe routing drawings Equipment and material datasheets
• Perform: Equipment sizing calculations Pipe sizing calculations Hydraulic calculations Pipe stress analysis Material take-offs (MTO)
• Raise purchase requisitions for equipment and materials.
• Review, verify, and sign off engineering design deliverables.

Project & Technical Support

• Liaise with in-house and overseas design teams to ensure engineering deliverables are completed on schedule.
• Support Project Management and Construction Teams during project execution activities.
• Provide engineering support during testing, commissioning, and start-up activities as required.
• Participate in technical reviews, design discussions, and problem-solving activities.

Procurement & Cost Optimisation

• Evaluate vendor quotations and provide technical recommendations during vendor selection.
• Identify and implement value engineering opportunities to improve efficiency and reduce project costs.
• Support tendering and business development activities by providing engineering input where required.

Qualifications & Requirements

• Bachelor's Degree or Master's Degree in Engineering.
• Minimum 5 years of experience in engineering design and detailed engineering activities within industrial, manufacturing, process, utilities, oil & gas, chemical, energy, or infrastructure projects.
• Strong understanding of engineering drawings, piping systems, equipment layouts, and engineering calculations.
• Experience in equipment sizing, hydraulic calculations, material take-offs, and engineering documentation.
• Highly motivated, proactive, and able to work effectively under pressure and tight project schedules.
• Strong communication and coordination skills with multidisciplinary teams.

Preferred Experience

• Experience supporting construction, testing, commissioning, start-up, or operational activities.
• Proficiency in AutoCAD.
• Familiarity with SAP, Navisworks, Microsoft SharePoint, and Microsoft Teams.
• Advanced proficiency in Microsoft Excel, Word, and PowerPoint.

Responsibilities

• Support commissioning, testing, and validation activities for building automation systems, integrated security systems, fire protection systems, monitoring systems, and M&E infrastructure at client project sites.
• Review engineering drawings, system architecture diagrams, schematics, technical specifications, and design documents to ensure compliance with project requirements.
• Conduct system walkdowns, inspections, mechanical completion verification, and operational readiness assessments.
• Develop and execute commissioning plans, testing procedures, validation protocols, and system verification activities.
• Perform functional testing, integrated system testing, Site Acceptance Testing (SAT), and operational verification of automation and monitoring systems.
• Coordinate with client engineering teams across electrical, mechanical, instrumentation, controls, and software disciplines during project execution.
• Manage punch lists, non-conformances, deviations, corrective actions, and system close-out activities.
• Review vendor documentation, commissioning reports, technical manuals, and equipment/system qualification records.
• Support implementation and testing of remote monitoring systems, command centre platforms, alarm management systems, and AI-enabled monitoring solutions.
• Ensure compliance with applicable industry standards, client specifications, safety requirements, and quality management procedures.
• Prepare commissioning reports, validation summaries, test documentation, and project handover deliverables.
• Participate in client meetings and provide technical support throughout project execution and commissioning phases.
• Support troubleshooting, root cause analysis, and performance optimisation of installed systems.
• Contribute to continuous improvement initiatives in commissioning and validation processes.

Requirements

• Bachelor's degree in engineering, Automation, Instrumentation, Electrical Engineering, Mechanical Engineering, or related discipline.
• 8 – 12 years of experience in commissioning, validation, automation, instrumentation, utilities, or engineering project execution.
• Strong knowledge of automation systems, control systems, instrumentation, utilities, and integrated facility systems.
• Experience reviewing engineering documentation, commissioning procedures, and technical specifications.
• Familiarity with systems such as SCADA, BMS, DeltaV, Siemens PCS7, or equivalent platforms.
• Hands-on experience in commissioning electrical, mechanical, HVAC, utility, or integrated building systems.
• Exposure to large-scale infrastructure, commercial buildings, industrial facilities, or mission-critical environments preferred.
• Strong understanding of quality systems, validation methodologies, and risk-based approaches.
• Experience in system integration, performance testing, and operational readiness execution.
• Strong analytical, troubleshooting, documentation, and coordination skills.
• Ability to work independently and manage multiple project assignments.
• Strong communication and stakeholder management skills.

EA License No: 19C9611
EA Personnel Reg No: R22108807 Liang Syeh Wei (Shevy)

You will oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services. You will also have to design, implement, and maintain the IT infrastructure of a healthcare organization.

 Perform Systems Administration

• Maintain Windows servers, virtualization platforms, and storage solutions.

• Manage Active Directory, DNS, DHCP, and Group Policy. Ensure high availability and disaster recovery with backups and replication.

• Monitor system performance, troubleshoot issues, and apply patches and updates.

 Maintain Network Services

• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.

• Implement and monitor network security policies, intrusion detection, and access control.

• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.

 Ensure Security and Compliance

• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.

• Ensure compliance with regulations (e.g., HIB).

• Conduct security audits and enforce policies on user access, encryption, and authentication.

Documentation and Reporting

• Create and maintain network documentation, including network diagrams, configurations, and procedures.

 On Rotating Roster

• Provide standby support during off-office hours and weekend on a rotational basis.

 Ad-Hoc Assignments

• Carry out any other tasks assigned by the supervisor or RO.

Job Requirements

• Bachelor’s degree in information technology or related field.

• With networking, system and security certifications such as CCNA, CCNP, CCIE, Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security.

• At least 5 years of experience providing systems, network and cybersecurity operational support.

• Must have hands-on experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.

• Within experience in at least 5 of the below technologies:

  • Windows Server environments, including installation, configuration, maintenance, and troubleshooting.

  • Managing and maintaining Active Directory, including user and group management, Group Policy, and domain services.

  • Nutanix Hyper-Converged Infrastructure (HCI) or equivalent technologies, including deployment, configuration, and management of Nutanix clusters.

  • NAS systems such as Synology, including RAID configurations, storage pools, volume management, and monitoring storage health.

  • Deploying, configuring, and managing Backup & Replication solutions such as Veeam.  Experience with backup strategies, disaster recovery, and data restoration.

  • SQL Server backups technologies such as Redgate, including configuring backup schedules, performing restores, and ensuring data integrity.

  • Network monitoring tools such as SolarWinds, including setting up and managing network and server monitoring, creating alerts, and troubleshooting performance issues.

  • Managing privileged accounts, including password rotation, session management, and auditing using PAM tools such as Password State and CyberArk.

  • Vulnerability scanning and assessment technologies such as Nessus and OpenVAS, including configuring scans, analysing results, and implementing remediation plans.

  • Microsoft Entra for identity and access management, including integration with Azure AD, managing user identities, and ensuring secure access to resources.

  • Cloud platforms such as Azure, AWS and/or GCP.

Job Title: Patch & ComplianceEngineer
Monthly Salary: $7,500 – $9,800 SGD
Location: Singapore
Employment Type: Full-time, Permanent

Roles & Responsibilities

• Own the end-to-end endpoint patching lifecycle for Windows, macOS, and third-party applications
• Manage monthly Patch Tuesday cycles using SCCM and Intune
• Coordinate with application owners to validate patch compatibility before deployment
• Generate and present compliance reports to IT leadership and audit teams
• Remediate vulnerabilities identified by EDR and vulnerability scanners (Tenable, Qualys, Rapid7)
• Maintain patch exception register and risk-acceptance documentation
• Automate patch deployment and reporting using PowerShell and SQL
• Collaborate with security team to prioritize patches based on CVSS scores and threat intelligence
• Respond to zero-day vulnerabilities with emergency patching procedures
• Continuously improve patch processes to increase compliance and reduce downtime
• Track and report on SLA adherence for critical and high-severity patches
• Maintain a patch calendar and communicate upcoming patching windows to stakeholders

Job Requirements

• Diploma or Bachelor's Degree in Information Technology or related field
• Minimum 5 years of experience in patch management and vulnerability remediation
• Deep knowledge of Windows Update, WSUS, SCCM Software Updates, and Intune Update Rings
• Experience with vulnerability management platforms (Qualys, Tenable, Rapid7)
• Strong SQL query writing skills for custom reporting
• Understanding of CVSS scoring and risk-based prioritization
• Microsoft certification in endpoint management preferred
• Experience with Mac patching (Jamf or Kandji) is an advantage
• Strong documentation and communication skills
• Singaporeans and PRs are encouraged to apply.

Provides Electrical/Instrument/Mechanical/Utilities engineering and troubleshooting support with the goal to increase operational efficiencies and minimize maintenance expenses

• Supervises maintenance technicians to support unit operations and/or run the utilities plant
• Standby for any emergency repair after office hours I weekends and public holidays
• Leads during the calibration of instruments, selection and installation of utilities automation systems
• Tracks and completes all compliance related requirements
• Oversees installation, modification, fabrication, testing, servicing and repairs of equipment adhere to site change control procedures
• Performs testing, commissioning, qualification (IQ, OQ) activities accordingly
• Manages maintenance related project schedule, costs and quality utilizing proper controls.
• Ensures that maintenance projects deliverables are met and all associated documentation is established
• Identifies, executes and makes improvement on routine work activities
• Participates in the improvement studies to enhance equipment or system efficiency, reduce energy cost/usage and other cost saving/avoidance projects
• Performs job assignments by Supervisor pertaining to equipment or system or documentation or housekeeping
• Establishes SHE objectives for projects and leads the implementation of systems.
• Support in utilities automation systems evaluations & implementation
• Participate in SHE, Business Compliance, cGMP and all other compliance-related matters, where applicable
• Any other tasks as and when assigned by Supervisors
• Ensures operational knowledge and technical skills are maintained and compliant with individual training and job requirements
  

Requirements
Bachelor’s degree in Engineering, Mechanical Engineering, Chemical Engineering or its equivalent
3-5 years of relevant technical experience in the pharmaceutical or manufacturing industry