Total 13 failure analysis engineer job vacancies in F&B / Tourism / Hospitality category

Asia Medical Enviro Services is a market leader in medical and bio-hazardous waste collection, treatment and disposal in Singapore.

We are located near Tuas Crescent MRT station, a 10-minute bus journey. Some of our staff benefits are medical & insurance coverage, performance bonus, free parking and learning & development opportunities.

Job Responsibilities:

• Monitor plant performance and ensure minimum downtime.
• Plan and schedule manpower weekly or monthly duty roster.
• Lead root cause analysis by identifying recurring issues, troubleshooting and implementing corrective actions.
• Support plant improvement initiatives.
• Liaise with vendors and contractors and negotiate for cost efficient services.
• Ensure Plant operations comply with existing safety regulations through regular inspections, risk assessments and permit-to-work management.
• Ensure plant comply with ISO standard and internal or external audit.
• Support plant maintenance and testing activities.
• Support Inventory management

Job Requirements:

• Bachelor's degree in electrical engineering or instrumentation & control engineering or other relevant fields.
• 2 – 3 years of relevant E&I maintenance experience in chemical plant would be preferred.
• Fresh graduates are welcome to apply.
• On-the-Job training will be provided.
• Problem-solving abilities and the ability to work under pressure during plant shutdowns.

Job Role Includes:

• You will also be required to issue updates and ensure documentation is easily available to all personnel, as well as provide HSE training as and when required.
• Instilling safety awareness to employees is a vital part of the role of the HSE Engineer and so you will be expected to lead by example and to promote best practice at all times with regards to safety at work in all areas.
• As the HSE Engineer you will be required to devise the company’s HSEQ plan and ensure its implementation.
• You are required to attend management meetings to provide ideas and best industry practice with all different level of employees.
• Liaison officer with local government agencies on operating licensing, permits and approval of work etc.
• Report incidents and conduct investigation to determine root cause(s) and lesson learn.
• Other duties as assigned.
• Develop, implement, and maintain the Quality Management System (QMS) in compliance with ISO 9001 standards.
• Establish and monitor quality objectives, KPIs, and continuous improvement initiatives across plant operations.
• Ensure proper document control and quality records management in line with QMS requirements.
• Lead and coordinate internal and external quality audits, including certification processes.
• Drive Corrective and Preventive Actions (CAPA) for quality issues, non-conformances, and customer complaints.
• Work closely with production teams to ensure process consistency, product quality, and defect reduction.
• Promote a quality culture and awareness among employees aligned with overall HSEQ objectives.

Key Responsibilities:

• Oversees the safe, efficient and cost-effective performance of the plant operations.
• Ensures production processes are managed and safely operated in accordance with organizational policies, operating procedures and management systems.
• Analyze risks and ensure that all procedures are adhered to and comply with ISO 45001 requirements and local WSH regulations. Well organized, able to work as a team and may occasionally be required to travel within AICA operating sites.
• Check on compliance to local regulation requirements and legislation.
• Ensure compliance with ISO 9001:2015 Quality Management System requirements alongside ISO 14001 and ISO 45001 standards.
• Monitor, analyze, and report quality performance metrics (e.g. defects, rework, customer complaints, process deviations).
• Coordinate with cross-functional teams to implement process improvements and standardization initiatives.
• Ensure all processes and outputs meet customer specifications and regulatory requirements.

Key Skills, Qualifications and Requirements of a HSEQ Engineer:

• Ideally, you will be educated to diploma/degree level and will be fully experienced in the ISO9001, ISO14001 and ISO45001 / Quality Management Systems (QMS) compliance/ implementation and certification process.
• Experience in handling internal and external audits and certification processes.
• Strong analytical skills with the ability to interpret quality data and trends.
• Good understanding of manufacturing processes and quality control practices is preferred.
• As someone who will be expected to work with a team of people, it is important that you have people management skills and have excellent interpersonal and presentational skills and be able to build relationships with external partners.
• The ability to be able to problem solve, interpret complex issues and motivate others to work to the best of their ability is essential.
• Able to work with Microsoft Office as well as other industry standard computer programs

Reporting to Plant Assistant Electrical & Instrument (E&I) Manager, this position is responsible for maintaining, troubleshooting and repairing E&I equipment for production plant, managing E&I contractors and ensuring all E&I maintenance activities are carried out efficiently and safely in compliance with local regulations and plant HSE requirements.

Responsibilities:

• Plan and schedule all maintenance works, including work and safety procedures, labour & equipment, spare parts and material requirements
• Ensure daily, periodical and shutdown maintenance works are carried out in safe, timely and efficient manner
• Carry out engineering studies of E&I works in modifications, revamping or upgrading of plant facilities to reduce plant trouble
• Carry out technical investigation of plant problems, evaluate findings and recommend countermeasures or propose new ideas to enhance reliability of E&I system and equipment
• Manage and maintain proper maintenance records & reports in accordance to industrial and regulatory requirements
• Manage and maintain proper stock level of spare parts inventory
• Provide training and guidance to junior engineers and contractors to maintain safe work record
• Ensure maintenance costs are controlled within budget
• Review and make forecast for yearly cost spendings and prepare long term maintenance, investment and upgrading plans
• Participate in internal and external audits and E&I related meetings and activities

Requirements:

• Bachelor’s Degree in Electrical and/or Instrumentation Engineering with at least 2 to 3 of relevant experience in E&I maintenance or engineering
• Diploma holders with more years of experience will be considered
• Candidate with working experience in chemicals or petrochemical environment will be advantageous
• Knowledge in PLC or DCS preferred
• Self-driven, independent and resourceful
• Effective team player with good communication and presentation skills
• Possess good analytical thinking and problem solving skills
• Proficient in Microsoft Office applications
• Able to work overtime whenever required
• Willing to work on Jurong Island

Electrical & Instrumentation (E&I) Engineer

• Develop, enhance, and maintain backend applications using Java
• Write and maintain Bash scripts for automation, deployment, and operational tasks.
• Debug and troubleshoot application issues in development and production environments.
• Collaborate with cross-functional teams to define and implement technical solutions.
• Participate in code reviews and follow best practices for clean, maintainable code.
• Support CI/CD pipelines and assist in build automation when required.

• Strong knowledge of Core Java, OOP concepts, collections, multithreading, and exception handling.
• Hands-on experience with Bash scripting on Unix/Linux environments.
• Experience with REST APIs and microservices (optional but preferred).
• Good understanding of Linux file systems, permissions, and process handling.

About the Role

We are hiring Gas & Chemical Engineers for semiconductor facility projects.

Responsibilities

• Design specialty gas systems.
• Design chemical distribution systems.
• Prepare P&IDs and piping specifications.
• Coordinate gas cabinets, valve manifold boxes and distribution networks.
• Support FAT, SAT and commissioning.

Requirements

• Diploma / Degree in Chemical, Mechanical or Process Engineering.
• Experience with specialty gas, bulk gas or chemical delivery systems.
• Familiar with SEMI S2, S6 and relevant safety standards.
• Experience in semiconductor facilities preferred.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for a Verification & Validation (V&V) Engineer to join us on this journey. In this role, you will be part of our fast-paced, fast-growing team and will take ownership of your role from the get-go. You will be planning, performing and documenting the system verification, integration and validation activities of our robotic system. You will be testing the requirements of our surgical robot to ensure that the product functions as intended. You will work with a multi-disciplinary team composed of mechanical, electrical, software and clinical engineers to develop the necessary test setups, protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Interpret and translate system and subsystem design requirements into verification and validation plan.
• Develop test protocols, procedures and methodologies based on requirements and risk considerations.
• Design, develop test fixtures, jigs and test systems for verification activities.
• Execute testing, analyze results and generate comprehensive reports, ensuring full requirements traceability and system characterization.
• Coordinate and support external compliance testing (e.g. IEC 60601-1, IEC 60601-1-2, ISO 10993), including preparation and documentation.
• Contribute to risk management processes including Design FMEA and hazard analysis activities.
• Ensure all test equipment is properly maintained, calibrated and compliant with quality standards.
• Collaborate cross-functionally to investigate, troubleshoot and resolve system issues and failures.
• Drive continuous improvement by contributing ideas and supporting rapid design iterations to better meet user and clinical needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Mechanical Engineering, Biomedical Engineering or related discipline.
• Minimum 3 years of experience in the medical device industry, with hands-on involvement in testing electromechanical systems.
• Solid understanding of standards such as IEC 60601-1, IEC 60601-1-2 and ISO 14971 is an advantage.
• Proven experience in developing and executing design verification protocols, generating test reports within a New Product Development (NPD) environment.
• Proficiency in CAD software such as SolidWorks and ability to interpret technical drawings is a plus.
• Familiarity with statistical analysis tools and methodologies such as Gage R&R and Minitab is a plus.
• Strong analytical, troubleshooting, problem-solving and communication skills.
• Adaptable, proactive, and able to thrive in a fast-paced, dynamic startup environment.

Contact

Please send your CV and cover letter to: hr@vivo-surgical.com. We look forward to receiving your application.

Job Description & Requirements

ASSISTANT ENGINEER $3000 - $4700

(Commercial Kitchen Equipment)

Perform deliver, installation, service, troubleshoot, repair and maintenance of commercial kitchen equipment & other works related

1. Perform various types of commercial kitchen equipment installations, commissioning,

modification, troubleshooting, repair, servicing, other technical support, on-site training and

ensure that it is safe, reliable and efficient.

2. Good knowledge on various types of commercial kitchen equipment, electronical,

mechanical and refrigeration.

3. Provide training to customers on product usage and maintenance.

4. Ability to read and comprehend wiring diagrams, and to follow manuals on operation and

installation to successful complete tasks.

5. Ability to quickly understand and carry out both written and oral instructions on technical

advice effectively.

6. Ensuring all works compliance with appliance standards and Health and Safety Act.

7. Ensure adherence to company standards and customer satisfaction.

8. Submission of daily work report.

9. Other ad hoc duties.

10. Valid Driver’s License with a good driving record to operate a commercial vehicle.

11. 3 years or above relevant experience in same/similar industry. (Commercial

Kitchen Equipment)

12. Good physical condition.

13. Willing to work overtime on Sunday & Public Holiday.

14. Working hours : Mon-Fri : 9am-6pm, Sat : 9am-1pm

* Please note that only selected candidates will be notified

Responsibilities

• Design and coordinate power distribution, PLC, SCADA and Facility Control & Monitoring Systems (FCMS).
• Prepare single-line diagrams, control philosophies and IO schedules.
• Review vendor and subcontractor submissions.
• Support construction, FAT, SAT and commissioning activities.
• Participate in multidisciplinary design reviews.
• Design LV power distribution systems.
• Perform load calculations and cable sizing.
• Prepare and review single line diagrams.
• Coordinate with utility and equipment vendors.
• Support construction and commissioning activities.

Requirements

• Diploma or Degree in Electrical, Instrumentation, Automation or related Engineering discipline.
• Experience in industrial, cleanroom or semiconductor facility projects.
• Familiar with engineering design and site execution

Good to Know

• Power Distribution Systems
• PLC Programming
• SCADA Systems
• FCMS / BMS
• Instrumentation & Control
• SEMI Standards
• FAT / SAT / Commissioning

As a Senior IT Engineer (Cloud & Microsoft 365), you will be responsible for designing, implementing, and managing cloud, Microsoft 365, and hybrid infrastructure environments. You will play a key role in ensuring the availability, security, and performance of IT systems while supporting the organization's cloud transformation and digital workplace initiatives.

Key Responsibilities

• Design, implement, and support cloud, Microsoft 365, and hybrid infrastructure solutions.
• Administer Microsoft 365 services, including Exchange Online, Teams, SharePoint, OneDrive, and Entra ID.
• Manage Intune, endpoint security, Conditional Access, and MFA policies.
• Plan and execute cloud and Microsoft 365 migration projects.
• Monitor, maintain, and optimize the performance, availability, and security of IT systems.
• Administer Windows Server, Active Directory, virtualization, and related infrastructure services.
• Implement backup, disaster recovery, and business continuity solutions.
• Troubleshoot and resolve complex infrastructure, cloud, and Microsoft 365 issues.
• Automate routine tasks using PowerShell and other administration tools.
• Maintain technical documentation and standard operating procedures.
• Provide technical guidance to junior engineers and support project delivery.
• Ensure compliance with security policies, industry standards, and best practices.

Job Summary

The T&C (Testing & Commissioning) Engineer will lead testing and commissioning activities for large-scale industrial and solid waste management projects, ensuring operational readiness and compliance with project specifications.

Responsibilities

• Lead and execute testing and commissioning activities for large-scale solid waste management projects including Waste to Energy (WTE), sludge incineration, materials recovery, and food waste treatment facilities
• Apply engineering expertise to operate and validate systems in industrial/process/utilities projects such as waste, water, oil & gas, and power sectors
• Collaborate with project teams to ensure testing and commissioning meet technical and safety standards
• Manage schedules and resources to complete testing and commissioning within project timelines
• Troubleshoot and resolve technical issues during commissioning to ensure system functionality and reliability

Required competencies and certifications

• Hold an EICA certification
• Possess at least 5 years of hands-on experience in testing and commissioning of large-scale solid waste management or industrial/process/utilities projects
• Have a relevant engineering degree or certification

Other Information

• Location: Tuas
• Working Days: 5.5 days per week (Mon to Fri: 8.30am to 5.30pm; Sat: 8.30am to 12.30pm, alternate Saturdays)
• Contract Duration: 2 years
• Salary: $10,000 per month
• Benefits: 2 months gratuity upon completion of 2 years
• Availability: Able to commence ASAP
• Shortlisting: Shortlisted candidates will be invited for interview

Principal Engineer / Manager, Defect Detection & Yield Engineering

Key Responsibilities

• Lead defect detection and yield improvement initiatives across semiconductor manufacturing operations.

• Drive root cause analysis and corrective actions for process and quality excursions.

• Analyze defect and yield data to identify trends and improvement opportunities.

• Partner with Process, Manufacturing, Quality, and Engineering teams to improve operational performance.

• Support implementation of advanced inspection and monitoring solutions.

• Develop best practices and mentor engineers within the organization.

Requirements

• Degree in Engineering, Materials Science, Physics, or related discipline.

• 7+ years of semiconductor manufacturing, yield, process, or defect engineering experience.

• Strong analytical, problem-solving, and stakeholder management skills.

• Experience in defect analysis, process monitoring, and yield improvement.

• Ability to lead cross-functional initiatives in a fast-paced environment.

• Manage end-to-end equipment lifecycle processes, from design specifications to operational readiness
• Ensure pharmaceutical and biologics manufacturing facilities and utilities meet strict cGMP regulations.
• Protocol Execution: Generating and executing C&Q protocols (FAT/SAT, IQ, OQ, VMP) for process systems, utilities, and lab equipment.
• Compliance & Validation: Ensuring systems meet cGMP and regulatory authority requirements.
• Troubleshooting: Investigating deviations and executing root-cause analyses for malfunctioning manufacturing systems (Delta V).
• Contractor Management: Supervising and guiding external vendors, contractors, and junior engineering staff.

Requirements:

• Min. Degree in any relevant science field
• Possess prior working experience in biotechnology or project engineering, preferrably from a bio-pharma environment.
• Familiar with DeltaV operations
• Able to work 12 hours rotating shift (day / night)

Interested candidates, please forward your resume to 

Consultant: Jalene Tan (R26160390)

Recruit Express Pte Ltd (99C4599)

jalenetan@recruitexpress.com.sgNo.: R26160390