Total 301 system technician job vacancies in Engineering category

Job Duties:

· Perform maintenance, testing and/or repair services of lifting equipment / hydraulic.

· Troubleshoot equipment faults and carries out preventive and/or corrective action.

· Ensure all work processes comply with quality, environmental and safety procedures and requirements.

· Planning and undertaking scheduled maintenance.

· Responding to breakdowns

· Diagnosing faults

· Supervising engineering and technical staff

· Managing budgets

· Creating maintenance procedures

· Hands-on job required

· Managing stocks of suppliers and equipment

· Other duties as detailed by company when necessary

Skills and Qualifications:

• NITEC Electrical, Electronic, Mechatronic or Mechanical Engineering or equivalent.

• Good initiative and a fast learner with good organizing skills.

• Able to work independently

Responsibilities:

• Perform minor maintenance such as strainer cleaning, filter/ screen change, coolant/ lubricants top up and hose connection etc.
• Perform checks, start-up, and shutdown operations on process equipment such as pumps and compressors as per Standard Operating Procedures or Work Instructions.
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations.
• Adjusting process parameters to optimize process operations under supervision of Supervisors.
• Collect process samples from assigned sampling points in a safe manner.
• Able to work in a laboratory environment performing in process sample testing to ensure product quality.
• Commissioning and de-commissioning of process equipment.
• Performing emergency shutdown of process equipment.
• Proper handing and blending of non-conforming and off specs products.
• Prepare plant equipment for maintenance and ensure all required Lockout, Tagout and Tryout has been performed.
• Preparing chemicals, including mixing and dilution, for process operations.
• Performing inter-tank transfers of chemicals and products based on established quality procedures.
• Performing emergency response activities and drills.
• Maintain acceptable housekeeping in assigned areas.
• Review of final product and process analytical results, and DCS conditions/trends.
• Understand and comply with departmental Safety and Environmental guidelines, policies, and procedures.
• Contribute to the improvement of the Safety, Health, Environment and Quality Programs.
• Performing any other duties or assignments as assigned by superiors.

Qualifications:

• NITEC or Diploma in Chemical Process Technology
• At least 8 years’ working experience as Process Technician in a chemical industry

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Industry: Chemical / Waste Treatment
Location: Tuas
Working Hours: Shift / 5.5-day work week (OT & allowances provided)

Salary & Benefits

• Salary: Up to $4500
• OT Pay + Shift Allowance + Transport Allowance
• Sign-On Bonus (Terms & Conditions apply)

Job Highlights

Operate distillation plant to recover usable products from waste materials

Ensure safe and efficient operations in accordance with SOPs

Handle and transfer flammable materials safely

Monitor process performance and record operating data

Support plant start-up, shutdown, and troubleshooting activities

Requirements

• NITEC / Diploma in Chemical Engineering, Biotechnology, or related field
• Able to work shifts and overtime when required

Seize This Opportunity!

Click Apply Now to upload your updated Resume/CV, and take the first step toward an exciting new career!

Only shortlisted candidates will be contacted.

Chong Zhe Hui (Fiona)

Registration No: R1984570

EA Licence no.: 14C7121.

Job Description:

• Conduct engine disassembly from modular level to piece part level.
• Ensure all maintenance activities are conducted in accordance with engine manuals, approved technical data and regulatory requirements.
• Upkeep & maintain assigned equipment, tooling, and fixtures.
• Adhere to all applicable EHS rules and regulations and report immediately any unsafe practices/conditions.

Job Requirement:

• Minimum Nitec or Diploma in Aerospace, Mechanical Engineering or a related
• Minimum 2 years’ work experience in disassembly/assembly/inspection in aviation industry
• Good understanding of technical drawing and manuals.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel:6513 56976514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary

You will inspect, maintain, troubleshoot, and repair construction equipment, including boom lifts and scissor lifts, as well as mechanical and electrical components to ensure safety and functionality. You will perform installations and maintenance at client sites, including working at height and handling physically demanding tasks.

Responsibilities

• Inspect construction equipment, including boom lifts and scissor lifts, to identify maintenance and repair needs for safe operation.
• Maintain and troubleshoot mechanical, hydraulic, and electrical components to ensure equipment reliability.
• Service, repair, and install mechanical and electrical parts to meet operational standards.
• Diagnose and repair faults in boom lifts, scissor lifts, and other access equipment.
• Conduct load testing and functional testing to verify equipment safety and compliance.
• Perform installations, repairs, and maintenance tasks at client sites to support project requirements.
• Work safely at height and complete physically demanding tasks to fulfill job duties.
• Handle ad-hoc technical duties as assigned to support team and project needs.

$3000 to $4100

Kaki Bukit

Objectives of the function

Ensure overall performance of lifts and escalators in his charge.

Responsibilities

• Ensure the team adhere to Quality and Safety standards. Conduct periodically quality walks, safety walks and safety inspections. Coach team on safety behaviour, and be a role model.

• Lead and develop a team of maintenance and call back technicians: train, assess, optimise the resources.
• Perform the yellow belt technical assessment for the EI technicians and guide green and red belters to be prepared for their assessment
• Coordinate subcontractor works and audit their work quality standards.
• Carry out feasibility study, health checks and standardisation project for lift and escalators according to customers’ requests, industrial trend and code of practice requirement.
• Provide technical support for internal staff from Service, Project, Sales and Sales Engineering Department.
• Coordinate with factory and/ or suppliers and contractors to implement new systems or repair existing ones on Schindler equipment, per customers’ requests.
• Coordinate and monitor corrective action programs, non-conformance, field feedback and field information.
• Support in the preparation of reporting for internal or external usage.
• Carry out ad-hoc assignments, such as, conduct training, attend customer meetings, etc.
• Lead in daily operations like maintenance scheduling and call back resources.
• Liaise with customers on their complaints and take the lead in follow up actions.
• Coordinate, monitor, execute actions on operation problems and lift technical problems.

Jessica Nguyen Huynh Thanh Truc

CEI Reg. No. R23113787

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing – Electrical
• Position Title: Assistant Electrical Engineer (Control System)
• Working Location: Tuas (transport provided at Pioneer MRT)
• Working Hours: 5 days, Mon - Fri (8am – 5.00pm)
• Salary Package: Up to $3500 Basic + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design control panels and electrical systems; create wiring diagrams/schematics and select components.
• Install, test, and commission new control systems and machines.
• Troubleshoot electrical/controls faults (I/O checks, logic issues) and perform repairs and upgrades.
• Configure and tune servo/stepper drives and motion control systems.
• Maintain technical documentation, schematics, and compliance records.
• Work with mechanical, software, and operations teams to improve reliability and uptime.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NITEC in Electrical Technology (Power & Control) or equivalent.
• Proficient in MS Office (Word/Excel/PowerPoint).
• Able to commit to OT as and when required on weekdays & weekends.
• Candidates without relevant experience are welcome to apply. Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81869 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Gul Circle

Up to $3,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - Apple.lim@manpower.com.sg

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Mechanical Technician (Repair, Maintainance, Changi)

Job Responsibilities:

• Response to all equipments faults arriving onsite at equipment location
• Conduct preventive maintenance per checklist and schedule
• Conduct tools check before start work
• Able to troubleshoot and perform corrective maintenance for minor equipment faults
• Update maintenance record for PM carried out

Job Requirements:

• N level/ NITEC/Higher Nitec/Diploma in Mechanical/Electronics/Electrical Engineering
• Ability to use Schematics Diagram for troubleshooting, or repair the mechanical componets
• Understanding of computers, operating systems and network knowledge is a plus
• Class 3 Driving License is a plus

We regret that shortlisted candidates will be notified.
Registration No.: R1980765
EA License No.: 02C3423

Chemical Cleaning Technician (Aerospace MRO)

Location: Seletar

Industry: Aerospace MRO

Salary : Up to $3,200 depending on experience

Our client is a leading provider of aircraft engine overhaul and component repair services, specializing in the Trent engine series. The company operates advanced facilities capable of servicing all Trent engine variants and can overhaul over 300 engines annually, supported by a state-of-the-art testing facility that ensures efficient turnaround times.

Job Summary

• Responsible for cleaning and chemical processing of aircraft engine components in accordance with OEM, safety, and quality standards.

Responsibilities

• Perform chemical cleaning and surface treatment of engine components.
• Operate cleaning equipment and chemical processing systems.
• Carry out degreasing, descaling, rinsing, drying, and passivation processes.
• Follow SOPs, safety procedures, and OEM work instructions.
• Inspect components before and after cleaning.
• Maintain cleanliness of work area and equipment.
• Support audits, documentation, and continuous improvement activities.
• Ensure proper handling and storage of chemicals and tools.

Requirements

• NITEC/Diploma in Engineering, Chemical Processing, or related field.
• 2–5 years of experience in chemical cleaning, manufacturing, aerospace, or MRO environment.
• Knowledge of chemical handling and workplace safety practices.
• Able to read and follow technical instructions and SOPs.
• Familiarity with aerospace materials and quality standards 

Lim Pey Chyi - Apple.lim@manpower.com.sg

Recruitment Consultant (Ra2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Responsibilities:

• To work at distillation process plant to make sure distil spent waste material into product.
• To ensure distillation process plant operates in safe operation parameters.
• To ensure the safety of the transferring of the flammable material.
• To ensure close co-ordination with the Laboratory for waste/product sampling.
• To ensure the following up of the SOP.
• To co-ordinate closely with the Laboratory & resale team for the re-sell items.
• To ensure there is sufficient storage capacity, and the product safely stored and treated.
• To ensure the performance and efficiency of distillation process plant in terms of the recovery yield and utilities consumption.
• Startup/shut down operation of distillation process plant according to SOP.
• Record process data and report any deviations.
• Identify and rectify process upset and equipment malfunction timely.
• Work with engineering to resolve equipment issues and implement preventive measures.
• conduct routine inspections for leaks, spills, and safety hazards. Ensure safe handling of materials that are flammable.
• To participate training program to enhance chemical and safety knowledge.
• To cover the 5S and safety job for the department.

Requirements:

• Minimum NITEC/Diploma in Chemical Engineering, Biotechnology, or a related field.
• Proficient in basic computer applications (e.g., MS Office, email, internet research).
• Proficient in both written and spoken English.
• Able to perform overtime/shift work.

Remuneration:

• Basic salary: $1,900 – $2,700
• Entitled Overtime / Shift Allowances
• Working hours: Monday to Friday (8am – 5pm); Saturday (8am – 12pm) / Shift Work (Day: 8am – 8pm, Night: 8pm – 8am)
• Company Transport / Transport Allowance ($120) if candidate manages own transport
• Sign-on Bonus (Terms & Conditions apply)

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• NITEC / Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Hardware & Engineering (Thermoplastic)
• Position Title: Engineering Technician
• Working Location: Pioneer
• Working Hours: 5.5 days (Mon - Fri: 8.00am - 5.00pm; Sat: 8.00am -12.00pm)
• Salary Package: Basic salary up to $4,500 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Maintain the building and ensure heating, lighting, and ventilation systems are functioning properly.
• Carry out general maintenance works such as painting, wall patching, plumbing repairs, air-conditioning servicing, and maintenance of electrical switches and fixtures.
• Perform routine preventive maintenance checks.
• Inspect and monitor building machinery and equipment regularly.
• Report any security or asset-related issues observed.
• Follow emergency response procedures and workplace safety guidelines.
• Support evacuation procedures during emergencies.
• Perform other related duties as assigned.

APPLY NOW!!!

• At least 2 years of relevant maintenance experience is preferred.
• Knowledge of building mechanical and electrical (M&E) maintenance works.
• Able to carry out general repair and maintenance tasks independently.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84839 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Purpose:

System Studies, Test program/scripts design and development, System Validation for new products, System Investigations and R&D support to Customer issues.

Key responsibilities:

· Design and verify digital and analog electronic circuits for micro-controller based system.

· Develop electrical designs to meet the design specifications

· Circuits analysis, test and trouble-shooting

· Design and develop FTDI IC pre-silicon/post silicon validation platform

· Define IC product validation plan and design IC validation test cases

· Review and develop product specification.

· Perform H/W and system design and verification

· Perform product compliance certification

· Perform design, application note and production release documents

· Perform production test support materials

· Support transfer of products to production.

Additional responsibilities:

· Any reasonable task assigned by management and deemed to be within the individuals’ capabilities to ensure smooth running of the business.

· As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Knowledge and skill requirements:

· Degree/Master’s in Electrical/Electronics Engineering

· At least 7 years of experience in the area of products development/validation

· Working experience from design to production are essential

· Knowledge and working experience in one or more of the following:

· Microprocessor system, architecture and development.

· Digital and analog circuit design experience

· Test scripts development in Python or other Programming languages is a must

· Knowledge in connectivity technology such as USB, UART, SPI, I2C

· FPGA development with RTL design experience is a plus

· Knowledge of USB type C, Power Delivery, USB3.2 SuperSpeed is a plus

Working conditions:

· Working conditions are normal for an office environment.

· Work requires willingness to work as per a flexible schedule.