Total 5,766 software test engineer job vacancies in Engineering category

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation
• To checking plans, drawings and quantities for accuracy of calculations
• To supervise site works compliances and inspection requirement
• To carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• To work closely with sub-contractors on project progress and ensure timely work arrangements
• To scheduling materials and equipment purchases and deliveries
• To liaise with consultant and carry out site inspection
• Attend all site's meeting on work progression
• To prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering
• 3 years working experience in Construction
• Able to work independently
• Have positive attitude

The Senior Solutions Engineer is the technical anchor of the Solutions Engineering team, combining deep hands-on expertise with a leadership mandate. You provide mentorship and guidance to Solutions Engineers, help standardize solution delivery practices, and serve as the decision-making authority for technical matters when the Engineering Manager is unavailable. You operate with a high degree of autonomy while remaining aligned with engineering leadership on strategic priorities.

Key Responsibilities

• Team Guidance & Mentorship: Coach and support Solutions Engineers on complex customer engagements, technical approaches, and professional development
• Delegated Decision-Making: Exercise independent judgment on technical decisions, customer escalations, and prioritization in the absence of the Engineering Manager, within agreed scope and boundaries
• Solution Architecture: Lead and review solution designs for high-complexity or high-impact customer engagements, setting the technical bar for the team
• Standards & Playbooks: Define and maintain solution engineering standards, reusable templates, and best practice documentation for the broader team
• Escalation Handling: Act as the primary escalation point for Solutions Engineers facing technical blockers or ambiguous customer requirements
• Cross-Functional Liaison: Represent the Solutions Engineering team in cross-functional discussions with Product, Customer Success, and Field CTO/SMEs when the Engineering Manager is unavailable
• Quality Review: Review and approve solution proposals, PoC outcomes, and technical specifications produced by Solutions Engineers
• Onboarding: Lead the technical onboarding of new Solutions Engineers, ensuring ramp-up on tools, processes, and customer environments
• Feedback Loop: Consolidate field insights from the team and surface patterns, gaps, and improvement opportunities to the Engineering Manager and Product

Required Qualifications

• 4-8 years of solution engineering, systems engineering, or technical consulting experience
• Excellent communication and presentation skills
• Ability to translate complex technical concepts for non-technical audiences
• Experience with enterprise customer environments
• Project management and organizational skills
• Bachelor's degree in Computer Science, Engineering, or related field (or equivalent experience)

Preferred Qualifications

• Cloud platform certifications (AWS, Azure, GCP)
• Experience with enterprise architecture and design patterns
• Familiarity with agile methodologies
• Track record of successful customer implementations
• Experience with technical sales or pre-sales engineering Understanding of customer business models and industry challenges

Competencies

• Technical expertise and continuous learning
• Customer empathy and business acumen
• Communication and presentation skills
• Problem-solving and analytical thinking
• Collaboration and teamwork
• Attention to detail and

Location: No. 7 Tuas Avenue 16 Singapore 638934 (Company transport at designated pick up points - Jurong east, Bukit batok, Choa chu kang, Lakeside, Tuas crescent etc)

Working Days: 5 days A Week

Working hours : 8:00am - 5:00pm or 9:00am - 6:00pm (40 hrs per week)

Salary : $2,800 to $4,200 (Based on market rate, subject to individual’s qualification & experience)

Overview

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Extract bill of quantities for steel reinforcements from structural drawings to ensure accurate material planning
• Schedule and draft technical drawings using appropriate tools for submission and production purposes
• Coordinate technical issues with project site personnel to facilitate smooth project progress
• Attend site discussions as needed to resolve technical queries and support project teams

Requirements:

• Min Diploma in Structural/Civil Engineering or QS / Structural Engineering Design or related discipline to support technical understanding
• Working knowledge of AutoCad and Revit-BIM tools to enhance drawing accuracy and efficiency
• Minimum of 1 year of relevant work experience in a similar field to ensure familiarity with industry practices

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

We are seeking a talented and highly motivated Engineer to join our game development studio. As an Engineer, you will play a crucial role in exploring new avenues of gameplay experiences, utilizing latest technologies, and pushing the boundaries of gameplay mechanics, systems, and features. You will also be involved in cutting-edge research and machine learning, procedural content generation, physics simulation, graphical rendering, interactive experiences, and more. This position is ideal for individuals who are passionate about gaming, technology, and pushing the limits of what is possible in the gaming industry.

Responsibilities:

• Implement gameplay features, controls, and interactive elements using Unreal Engine.
• Collaborate closely with game design teams and artists to develop sophisticated interactive experiences and gameplay mechanics that utilize AI-infused behaviors and adaptive systems.
• Integrate assets, animations, and visual effects into the game to create cohesive and engaging gameplay experiences.
• Conduct advanced research and development activities to enhance gameplay experiences, incorporating the latest technologies and innovative methodologies into Unreal Engine workflows.
• Explore and implement cutting-edge techniques in graphical rendering within Unreal Engine to achieve stunning visuals and optimize performance on console platforms.
• Debug and resolve gameplay-related issues, ensuring a high level of quality and polish in the final product.
• Stay current with industry trends, emerging technologies, and academic research to identify opportunities for innovation and improvement in Unreal Engine development.

Requirements:

• Bachelor's or Master's degree in Computer Science, Computer Engineering, Mathematics, Physics, or a related field.
• Extensive programming experience in languages such as C++ and C#.
• Proven track record of developing and shipping games or interactive applications using Unreal Engine.
• Strong understanding of game design principles and mechanics.
• Excellent problem-solving skills, creativity, and critical thinking abilities.
• Ability to adapt to fast-paced and evolving project requirements.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.

Preferred Attributes:

• In-depth familiarity with Unreal Engine and substantial experience in developing games or interactive applications using this engine.
• Strong understanding of advanced mathematics, including statistics, functional analytics, and linear algebra.
• Proficiency in physics principles, particularly in particle and rigid body dynamics.
• Knowledge of machine learning concepts for innovative research and development initiatives.

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

Key Responsibilities

1. Equipment Ownership & Performance

• Act as equipment owner for a defined set of CMP tools 
• Monitor OEE and uptime, define and drive actions to improve them.
• Analyze equipment alarms, and chronic issues; implement robust corrective and preventive actions.

2. Maintenance & Troubleshooting

• Define and optimize PM (Preventive Maintenance) plans and spare parts strategy.
• Support technicians in complex troubleshooting: mechanical, electrical, pneumatic, vacuum, robotics and software.
• Escalate and coordinate with equipment vendors (remote and on-site) for advanced technical support.

3. New Equipment Introduction & Upgrades

• Participate in specification, selection, installation and qualification of new CMP tools.
• Lead or support process and equipment release to production, including capability and stability checks.
• Manage equipment upgrades, retrofits, and obsolescence mitigation projects.

4. Process & Quality Support

• Work with process engineers to ensure that equipment performance meets process requirements 
• Support yield, quality, and reliability investigations from an equipment perspective
• Ensure equipment operation complies with quality systems (e.g. IATF 16949, ISO 9001, automotive standards where applicable).

5. Continuous Improvement & Industrial Efficiency

• Analyze data and KPIs; identify bottlenecks and chronic losses.
• Lead or participate in Lean/Six sigma/SMED activities for cycle time, cost, energy, and throughput improvements.
• Drive standardization of settings, PM procedures, troubleshooting guides, and documentation.

6. Safety, Environment & Compliance

• Ensure strict adherence to EHS rules (chemicals, slurry, gases, high voltage, vacuum, cleanroom, LOTO).
• Participate in risk assessments, FMEA, and implementation of safety interlocks and procedures.
• Maintain compliance with environmental and regulatory requirements (e.g. waste handling, emissions).

7. Documentation, Training & Knowledge Management

• Create and maintain equipment documentation: procedures, checklists, work instructions, recovery plans.
• Train and coach maintenance technicians on equipment usage and basic troubleshooting.
• Contribute to knowledge base and share best practices across shifts and sites.

Job Requirements:

• A Bachelor’s Degree in Mechanical, Mechatronics, Electrical & Electronics Engineering, Materials Science Engineering, Chemical Engineering or equivalent.
• Min 5 years of relevant work experience in CMP area, familiar with CMP Equipment (AMAT MirraMesa, Ebara F-REX200, Ontrak, etc.).
• Strong troubleshooting skills and deep technical knowledge.
• Knowledge of SPC, FMEA, 8D methodologies.
• Excellent communication, cross-functional collaboration abilities and written skills.
• Positive learning attitude with strong sense of responsibility.
• Strong ownership, a commitment and flexibility to support operational priorities
• Able to adapt in a fast paced environment and work under pressure.

Electronic Hardware Design Engineer.

Duties and Responsibilities

· Develop electronic hardware from the ground up, while working closely with system designer.

· Create schematic and a thorough QC process

· Hardware safety/reliability analysis and quality assurance.

· Able to work with PCB designer, PCBA assembly plants for prototype fabrication and BOM management.

· Write tests for both existing and new electronic hardware compatibility and stability

Hardware design Engineer Requirements and Qualifications

· Bachelor’s degree in electronic engineering, information technology, computer science, or a related field

· Experience in schematic development for embedded system, analog / RF / Digital / FPGA.

· Experience of Altium designer or other schematic / PCB design tool.

· Experience on TI, Xilinx electronic components and selection / assessment tools.

· In-depth understanding of network communication.

· Working knowledge of TI ARM / Xilinx SoC IDE.

Job Title - MRO Engineers

Location - Ang Mo Kio

Type - 1 year contract, renewable

Description -

Will be a part of the Maintenance, Repairs, Overhauls (MRO) – Engineering team to ensure the smooth functioning of our engineering, quality and reliability processes supporting Ground Support Equipment (GSE) maintenance operations at the customer’s premises. Will play a key role in maintaining operational reliability, troubleshooting issues, engaging the customer in technical/engineering issues, and implementing process improvements to enhance efficiency and performance.

Troubleshoot, analyze, and resolve technical issues utilizing practical fault tree analysis methodologies to minimize GSE downtime.

Conduct failure mode analysis and recommend enhance maintenance scheme to improve GSE reliability.

Communicate with the customers on troubleshooting, failure mode and corrective/preventive actions on technical defects.

Prepare technical report and presentation deck for submission and presenting to the customer when required.

Develop, review, and update technical documentation including maintenance manuals, repair procedures, and engineering change requests.

Perform spare parts obsolescence management which include identifying obsolete spare parts and mitigating risk through monitoring, alternative parts identification and build safety stocks.

Collaborate closely with operations, quality assurance, and supply chain teams to optimize maintenance schedule planning.

Respond to urgent technical issues, emergencies during off-office hours and weekends when necessary.

Ensure compliance with safety, security, and regulatory standards.

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

Responsibilities:

• Perform daily SAP operations.
• Formulate reasonable production plans based on market sales forecasts to meet customer demand with the most economical inventory.
• Optimize production plans, regularly analyze plan execution status, and drive improvements in plan execution rate to ensure delivery performance.
• Improve production efficiency (OEE).
• Manage and plan the procurement of operation-related production materials.
• Handle logistics for wafers, production-related materials, parts, and finished goods.
• Develop production material plans to ensure the timely completion of production tasks and the rationality of material inventory levels.
• Any other ad-hoc tasks as assigned. 

Requirements:

• Minimum Bachelor in a Science or Engineering field.
• Experience in logistics planning / supply chain management (experience in 6/8-inch FAB or similar environment is preferred).
• Strong communication skills to communicate effectively with stakeholders
• Proficient in Windows operating systems and Office software.
• Skilled in using material management systems such as SAP & ERP.
• Proficient in SQL and Python.
• Fresh graduates are welcome to apply

As a PDE Central Yield Enhancement (YE) Engineer within Package Development Engineering (PDE), you will own and execute yield learning and improvement activities across advanced package technologies during HBM and NCG New Product Introduction (NPI). Your scope includes yield monitoring, excursion response, and yield stabilization, with an emphasis on rapid learning, early risk identification, and scalable solutions. 

This role plays a key part in driving robust yield performance from first silicon through NPI ramp and early HVM, partnering closely with Process Integration (PI), MRDA, Process Engineering, Assembly/Test Manufacturing and Quality teams. You will act as a hands‑on yield owner for NPI builds, translating data into actionable insights, driving fast learning cycles, early risk detection, and leading disciplined yield recovery. 

Job Responsibilities 

Yield Loss Accounted For 

• Account for HBM NPI builds across PWF, Assembly, and test through defect breakdown and PFA submission to understand fail mode 

• Own and execute assigned Central YE responsibilities for HBM NPI program, work closely with PI to identify defects that is coming from their area to brainstorm for CIP 

• Learn NPI processes, phase gates, and yield best practices 

• Assist in maintaining yield dashboards and trackers. Support PI/PE/RDA in identifying and transforming processing data to account/ breakdown a yield loss 

Yield Deviation Control 

• Analyze and report on yield deviation issue and trigger action from PI, PE or RDA 

• Support block run and partial conversion build yield analysis to early detect any impact on yield 

• Work closely with PCS team to identify SPC or FDC charts to put into YLR dashboard for shift left monitoring 

Yield Improvement Opportunities 

• Brainstorm with staff from other departments for improvement opportunities and propose to PI 

• Design and implement new solutions, including hotspot analytics, to improve the effectiveness of the automated defense line system. 

• Utilize software tool like Auto-diagnostics to find yield improvement opportunities 

Integrating Artificial Intelligence 

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgement and complying with organizational standards and legal requirements 

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work 

Job Requirements 

• Bachelor's or Master's degree in Electrical/ Electronics Engineering/ Computer Engineering / Computer Science with 2 to 5 years of experience in semiconductor industry, specifically involving yield analysis, defect/root cause investigation, or data-driven process optimization in advanced memory (HBM, DRAM, NAND) or high-volume semiconductor packaging. 

• Proficiency in Python (e.g., Pandas, NumPy) and SQL for semiconductor manufacturing data analysis, with hands-on experience developing interactive dashboards and visual reports using tools (including Spotfire and Power BI/Tableau) to translate large manufacturing datasets into actionable yield and process improvement insights. 

• Demonstrated experience building automated reporting workflows, data pipelines, or process automation solutions using Python scripting or RPA tools within a semiconductor manufacturing environment, with the ability to drive cross-functional decisions across manufacturing, process integration, and engineering teams in the semiconductor industry. 

• Ability to apply baseline digital fluency and role-appropriate AI literacy to use AI-enabled tools responsibly and effectively for research, analysis, content creation, problem-solving, operational tasks, and achieving business outcomes 

Embody Micron’s Core Values 

• People – Respect, develop, and empower others. 

• Innovation – Drive continuous improvement and breakthrough thinking. 

• Tenacity – Show grit and determination. 

• Collaboration – Build trust and foster teamwork. 

• Customer Focus – Deliver excellence and value 

Job Descriptions

• As an Equipment Owner able to evaluates, selects, and make justification for equipment that is most appropriate and cost effective for the manufacture of company products.
• Oversees the installation, modification, upgrade, and maintenance of manufacturing equipment.
• Liaise with vendors to resolve equipment issues and manage/drive vendors' performance to meet/exceed equipment KPI, MTTR, MTBF and goals.
• Establishes projects and solutions for increasing uptime, throughput, cost saving and resolve equipment problems that affect the manufacturing process.
• Ability to review Process SPC data, setup equipment FDC and machine control and Improve alarm reduction
• Provides technical support to the manufacturing equipment repair and process engineering organizations.
• Defines and writes preventative maintenance procedures and schedules.
• Conduct training to shift members (PM operator, Technician & Engineers).
• Able to coach shift engineer in performing hardware trouble shooting, generate troubleshoot lesson learnt material and equipment OCAP for sharing with Team

Job Requirements

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• 2 or more years of semiconductor equipment or process engineering experience in Wafer bonder and Sam coat machines.
• Consistent track record to solve problems & address root causes for tools
• Perform Normal/ Swing Shift ( or 12-hour rotating shift if required)
• Good interpersonal skills and is an excellent team player
• Good verbal and written communication skills
• Logical thinking capability and good analytical skill

Responsibilities

• Collaborate with main contractors to plan and monitor civil and infrastructure work progress, ensuring alignment with project schedules
• Supervise construction activities to verify compliance with contract drawings and specifications
• Prepare detailed correspondence reports that include corrective actions and value-added recommendations based on best practices
• Maintain accurate daily work records, including documenting additional work claims for clients and subcontractors
• Perform other assigned ad-hoc duties to support project objectives

Required competencies and certifications

• Apply knowledge of civil and infrastructure works to effectively oversee construction projects
• Demonstrate ability to work independently and collaboratively within a team environment
• Manage work schedules including six-day work weeks and shift work during critical project phases
• Operate effectively while stationed at the site office

Preferred competencies and qualifications

• Degree or Diploma in Civil Engineering
• Minimum 5 years of experience in the construction industry

Cloud Engineer responsible for managingvirtualization and hyperconverged infrastructure platforms, specifically VMwareand Nutanix. The objective is to ensure high availability, scalability,performance, and security of the virtual infrastructure supporting businessapplications.

Responsibities:

• Manage VMware and Nutanix environments end-to-end
• Ensure performance, availability, and security compliance
• Provide proactive recommendations and continuous improvements
• Maintain a resilient and highly available virtual infrastructure
• Optimise performance and resource utilisation across clusters
• Ensure secure and compliant virtual environments
• Support automation, scalability, and cloud-like operations
• Deliver efficient provisioning and lifecycle management
• Deploy, configure, and manage VMware environments (vSphere, ESXi, vCenter)
• Manage clusters, resource pools, and virtual machines (VMs)
• Configure and maintain HA, DRS, and vMotion
• Perform lifecycle management (patching, upgrades, firmware coordination)
• Manage templates, snapshots, and VM provisioning
• Deploy and maintain Nutanix AOS and AHV environments
• Manage clusters using Nutanix Prism (Element/Central)
• Provision and manage virtual machines and storage containers
• Configure and maintain HA, live migration, and storage policies
• Perform cluster expansion, upgrades, and health monitoring
• Integrate VMware and Nutanix environments with backup solutions
• Manage VM-level backups and replication
• Perform restore operations (file-level, VM-level, full recovery)
• Conduct periodic recovery and DR testing
• Provide  support for virtualization-related issues
• Troubleshoot VM, host, and cluster issues
• Conduct root cause analysis (RCA) for major incidents
• Collaborate with network, storage, and system teams

Qualifications:

• Possess fundamental knowledge of security and vulnerability-based approach to security hardening.
• Hands-on experience in VMware, Windows Server and standard platform Monitoring
• Candidates will need to coordinate and work closely with other parts of IT and the business to implement recommendations as needed.
• Administer, monitor, and maintain security infrastructure (Patch, Upgrade, and Monitor for issues).
• Significant understanding and ability to work with Windows, Linux, and Mac operating systems.
• Strong attention to detail with analytical and problem-solving skills.
• Awareness of cybersecurity trends, issues, and hacking techniques.
• VMware: vSphere, ESXi, vCenter, SRM, vSAN
• Nutanix: AOS, AHV, Prism, Leap, Calm
• Automation: PowerCLI, Ansible,
• Backup: Commvault

Must have relevant experience in Security or security related fields.

Job Role
Cloud Engineer

Job Summary;
We are seeking a Cloud Engineer with strong expertise in Terraform and AWS to design, implement, and manage infrastructure-as-code (IaC) solutions for cloud-based systems. This role will act as the subject matter expert for Terraform on AWS, collaborating with application, security, internal stakeholders, and external vendors to ensure a secure, reliable, and high-performing cloud environment within MAS. The ideal candidate brings deep Terraform expertise, strong knowledge of AWS services, and a proven ability to architect and manage large-scale cloud infrastructure through code.

Key Responsibilities:

a. Design, develop, and maintain reusable, scalable Terraform modules and configurations for AWS infrastructure, aligned with best practices.
b. Collaborate with application, security, and internal teams to translate business requirements into robust Terraform-driven infrastructure solutions.
c. Implement and manage AWS Landing Zones using Terraform, ensuring secure, standardised, and compliant multi-account environments.
d. Continuously optimise cloud infrastructure through advanced Terraform automation to enhance availability, performance, and cost efficiency.
e. Define and maintain Terraform state management strategies, including remote backends, state locking, and disaster recovery processes.
f. Embed security controls and compliance requirements within Terraform code, adhering to AWS security best practices and regulatory standards.
g. Develop and maintain comprehensive documentation, coding standards, and reusable infrastructure modules.
h. Provide technical leadership, including mentorship, code reviews, and guidance on Terraform best practices and design patterns.
i. Troubleshoot complex Terraform deployments and AWS infrastructure issues, implementing long-term fixes to prevent recurrence.
j. Stay up to date with Terraform advancements, AWS service updates, and emerging IaC trends.

What We Are Looking For:

k. Bachelor’s degree in computer science, Engineering, or a related discipline, or equivalent practical experience.
l. Minimum 6+ years of hands-on experience with Terraform, including advanced capabilities such as modules, workspaces, providers, and state management.
m. Deep expertise in AWS services and architecture, including EC2, VPC, IAM,S3, RDS, Lambda, CloudFormation, and AWS Organizations.
n. Proven experience implementing AWS Landing Zones and multi-account architectures using Terraform.
o. Strong proficiency in scripting languages, particularly Python and Bash, for automation and Terraform integration.
p. Solid understanding of AWS security services, compliance frameworks, and infrastructure security best practices.
q. Experience with CI/CD pipelines for infrastructure deployment using tools such as GitLab CI, Jenkins, or AWS Code Pipeline.
r. Strong analytical and problem-solving skills, with the ability to debug complex infrastructure issues and optimise Terraform performance.